X-ray crystallographic studies of the alanine-specific racemase from Bacillus stearothermophilus. Overproduction, crystallization, and preliminary characterization

To facilitate large-scale purification and crystallographic study, we have subcloned the gene for the alanine racemase of Bacillus stearothermophilus from pICR401 (Inagaki, K., Tanizawa, K., Badet, B., Walsh, C. T., Tanaka, H., and Soda, K. (1986) Biochemistry 25, 3268-3274) and overproduced the enzyme in Escherichia coli W3110 lacIq using the tac promoter of PKK223-3. This system yields alanine racemase as 6% of the bacterial cytosolic protein. Purification by a modification of the procedure of Inagake et al. yielded 75 mg of homogeneous alanine racemase from 30 g of cells (wet weight). Large, well-formed crystals of alanine racemase have been grown from polyethylene glycol 8000 using vapor diffusion. These crystals have unit cell dimensions a = 85.3 A, b = 110.0 A, and c = 89.9 A. The crystals belong to space group P2(1), with beta fortuitously equal to 90 degrees within experimental error; however, they are frequently twinned by second order pseudomerohedry with twin fraction (the ratio of the volume of the smaller twin domain to the total volume of the crystal) ranging from about 0 to 0.5. Fortunately, for crystals with low twin fraction, computational methods have been developed for the analysis and correction of simple twinning (Fisher, R. G., and Sweet, R. M. (1980) Acta Crystallogr. A36, 755-760). The crystals contain two alpha 2 dimers of alanine racemase in the asymmetric unit. We have identified several potentially useful heavy atom derivatives in low resolution screening experiments and are proceeding with high resolution data collection.     

Characterization of crystals of a cytochrome oxidase (nitrite reductase) from Pseudomonas aeruginosa by x-ray diffraction and electron microscopy

Cytochrome oxidase from Pseudomonas aeruginosa has been crystallized from 2 m-ammonium sulfate. The crystals occur principally as thin diamond-shaped plates of space group P2₁2₁2 with unit cell dimensions of 92 Å × 115 Å × 76 Å. Determination of the density of glutaraldehyde-fixed, water-equilibrated crystals (1.167 g/cm³), coupled with the unit cell volume (804,000 ų), indicates that there is one subunit (~63,000 Mr) per asymmetric unit. X-ray diffraction data which were limited to 12 Å resolution due to small crystal size were obtained for the hk0 and 0kl zones using precession photography. Amplitude and phase data for the hk0, 0kl, and h0l zones were obtained from computer-based Fourier analysis of appropriate micrographs recorded from negatively stained microplates and thin sections of larger crystals using minimal beam electron microscopy. For crystals embedded in the presence of tannic acid it was possible to achieve 20 Å resolution which is comparable to the resolution achieved with negative staining of thin crystalline arrays. In addition, unstained electron diffraction on glutaraldehyde-fixed, glucose-stabilized plates was recorded to a resolution of 9 Å. The three-dimensional packing of the cytochrome oxidase dimer in the unit cell has been deduced from computer reconstructed images of the three principal projections along the crystallographic axes. The cytochrome oxidase dimer is located in the unit cell with the dimer axis coincident with a crystallographic 2-fold axis; thus within the resolution of the present data in projection (9 Å) the two subunits are identical, in agreement with biochemical evidence. The crystals have been prepared with the enzyme in the fully oxidized state and upon reduction a progressive cracking of the crystals is observed, possibly due to a conformational change dependent on the oxidation state of the heme iron.     

Crystallization and preliminary X-ray diffraction studies of a protective cloned 28 kDa glutathione S-transferase from Schistosoma mansoni.

Crystals of the recombinant 28 kDa glutathione S-transferase from Schistosoma mansoni have been obtained by the hanging-drop method of vapor diffusion from ammonium sulfate solutions. The successful crystallization of this enzyme required the presence of a reducing agent and S-hexylglutathione. The crystals belong to the cubic space group P4(1)32 (or P4(3)32), with unit cell dimensions a = 122.6 A and contain one molecule in the asymmetric unit. The crystals diffract to at least 2.8 A resolution and are suitable for X-ray crystallographic structure analysis.     

Electron microscopy of decorated crystals for the determination of crystallographic rotation and translation parameters in large protein complexes.

The lumazine synthase/riboflavin synthase complex of Bacillus subtilis consists of an icosahedral capsid of 60 beta subunits enclosing a core of 3 alpha subunits. The preparation of reconstituted hollow capsids consisting of 60 beta subunits and their crystallization in a hexagonal (space group P6(3)22) and in a monoclinic (space group C2) modification have been described. The rotational and translational parameters of the protein molecules in both crystal forms were studied by electron microscopy of freeze-etch replicas and by Patterson correlation techniques. Decoration with silver and image processing provided images with the positions of the 3-fold and 5-fold molecular axes being labelled by metal clusters. This allowed the unequivocal determination of the orientation and translational position of the protein molecules with respect to the crystallographic axes in the hexagonal modification. From inspection of the decoration images it was immediately obvious that the hexagonal crystal forms of alpha 3 beta 60 and of beta 60 are isomorphous. In the monoclinic crystals, a local icosahedral 2-fold coincides with the crystallographic 2-fold axis. The exact solution of the particle orientation was determined by interpretation of Patterson self-rotation functions for the icosahedral symmetry axes. Rotational and translational parameters for the monoclinic modification are given. A rational procedure for the efficient application of freeze-etching techniques in order to elucidate the packing in crystals of large proteins is described.     

Electron microscopy of thin-sectioned three-dimensional crystals of SecA protein from Escherichia coli: structure in projection at 40 A resolution.

SecA is a single-chain, membrane-associated polypeptide (102 kDa) which functions as an essential component of the protein export machinery of Escherichia coli. SecA has been crystallized from ammonium sulfate as small, three-dimensional bipyramidal crystals (0.1 x 0.1 x 0.05 mm). These crystals did not demonstrate detectable diffraction of X-rays from rotating anode sources. For study by electron microscopy, individual crystals were cross-linked in glutaraldehyde and OsO4 solutions, dehydrated, embedded in epoxy resin, and sectioned normal to crystallographic axial directions inferred from the external morphology of the crystals. Fourier transformation of processed images of untilted thin sections stained with uranyl acetate and lead citrate show reflections extending to 31 A resolution. Diffraction data and reconstructed images of the projected density of the unit cell contents indicate that the bipyramidal SecA crystals belong to orthorhombic space group C222(1) with unit cell dimensions a = 414 A, b = 381 A, and c = 243 A. Filtered images and density maps of mutually orthogonal projections of the unit cell contents are consistent with a three-dimensional model in which the asymmetric unit contains eight SecA monomers. The large unit cell dimensions and packing of protein monomers suggest that SecA is crystallizing as an oligomer of either dimers or tetramers.     

Crystallization and preliminary X-ray diffraction studies of coxsackievirus B1.

Preparations of coxsackievirus B1 (CVB1) derived from an infectious cDNA clone have been crystallized in multiple crystal forms. Using high intensity synchrotron radiation, an orthorhombic form of the crystals was shown to diffract X-rays to at least 2.9 A resolution. The unit cell has a primitive lattice with dimensions a = 323 A, b = 450 A, and c = 522 A. A crystallographic asymmetric unit of these CVB1 crystals probably contains an entire virus particle, implying the presence of 60-fold non-crystallographic redundancy. This CVB1 crystal form appears to be suitable for high-resolution structure determination by X-ray crystallography.     

Transmission Electron Microscopy of GroEL, GroES, and the Symmetrical GroEL/ES Complex

Two new 2-D crystal forms of the Escherichia coli chaperone GroEL (cpn60) 2 × 7-mer have been produced using the negative staining-carbon film (NS-CF) technique. These 2-D crystals, which contain the cylindrical GroEL in side-on and end-on orientations, both possess p21 symmetry, with two molecules in the respective unit cells. The crystallographically averaged images correlate well with those obtained by other authors from single particle analysis of GroEL and our own previous crystallographic analysis. 2-D crystallization of the smaller chaperone GroES (cpn10) 7-mer has also been achieved using the NS-CF technique. Crystallographically averaged images of GroES single particle images indicate considerable variation in molecular shape, which is most likely due to varying molecular orientation on the carbon support film. The quaternary structure of GroES does, nevertheless, approximate to a ring-like shape. The complex formed by GroEL and GroES in the presence of ATP at room temperature has been shown to possess a symmetrical hollow ellipsoidal conformation. This symmetrical complex forms in the presence of a 2:1 or greater molar ratio of GroES:GroEL. At lower molar ratios linear chains of GroEL form, apparently linked by GroES in a 1:1 manner, which provide supportive evidence for the ability of both ends of the GroEL cylinder to interact with GroES. The apparent discrepancy between our data and that of other groups who have described an asymmetrical "bullet-shaped" (holo-chaperone) GroEL/ES complex is discussed in detail.     

Crystallization and preliminary x-ray diffraction study of cholera toxin B-subunit

Cholera toxin binds to its ganglioside GM1 receptor via its B-subunit, a pentameric assembly of identical subunits (Mr = 11,600). Diffraction quality crystals of cholera toxin B-subunit have been obtained at room temperature by vapor diffusion with polyethylene glycol in the presence of the nonionic detergent beta-octyl glucoside. The crystals have been characterized with x-radiation as monoclinic, space group P21, with unit cell dimensions a = 39.0 A, b = 94.3 A, c = 67.5 A, beta = 96.0 degrees. There are two molecules per unit cell, with one molecule (Mr = 58,000) in each asymmetric unit. Precession photographs (micron = 13 degrees) show that crystals diffract beyond 3.3-A resolution and are stable in the x-ray beam at room temperature for at least 40 h; thus, they can be used to collect three-dimensional crystallographic data.     

Atomic force microscopy of crystalline insulins: the influence of sequence variation on crystallization and interfacial structure.

The self-association of proteins is influenced by amino acid sequence, molecular conformation, and the presence of molecular additives. In the presence of phenolic additives, LysB28ProB29 insulin, in which the C-terminal prolyl and lysyl residues of wild-type human insulin have been inverted, can be crystallized into forms resembling those of wild-type insulins in which the protein exists as zinc-complexed hexamers organized into well-defined layers. We describe herein tapping-mode atomic force microscopy (TMAFM) studies of single crystals of rhombohedral (R3) LysB28ProB29 that reveal the influence of sequence variation on hexamer-hexamer association at the surface of actively growing crystals. Molecular scale lattice images of these crystals were acquired in situ under growth conditions, enabling simultaneous identification of the rhombohedral LysB28ProB29 crystal form, its orientation, and its dynamic growth characteristics. The ability to obtain crystallographic parameters on multiple crystal faces with TMAFM confirmed that bovine and porcine insulins grown under these conditions crystallized into the same space group as LysB28ProB29 (R3), enabling direct comparison of crystal growth behavior and the influence of sequence variation. Real-time TMAFM revealed hexamer vacancies on the (001) terraces of LysB28ProB29, and more rounded dislocation noses and larger terrace widths for actively growing screw dislocations compared to wild-type bovine and porcine insulin crystals under identical conditions. This behavior is consistent with weaker interhexamer attachment energies for LysB28ProB29 at active growth sites. Comparison of the single crystal x-ray structures of wild-type insulins and LysB28ProB29 suggests that differences in protein conformation at the hexamer-hexamer interface and accompanying changes in interhexamer bonding are responsible for this behavior. These studies demonstrate that subtle changes in molecular conformation due to a single sequence inversion in a region critical for insulin self-association can have a significant effect on the crystallization of proteins.     

Two-Dimensional Crystallization of Brush Border Myosin I

Brush border myosin-I (BBMI) is a single-headed unconventional myosin found in the microvilli of intestinal epithelial cells, where it links the core bundle of actin filaments to the plasma membrane. An association of BBMI with anionic phospholipids has been shown to be mediated by a carboxy-terminal domain which is rich in basic amino acids. We have exploited this natural affinity of BBMI for negatively charged lipids to form two-dimensional (2D) crystals of this protein which are suitable for structural analysis by electron crystallographic techniques. The 2D crystals which we have obtained belong to one of two space groups, p22₁2₁or p2. We present here projection maps calculated from images of negatively stained crystals for each of these crystal types to a resolution of 20 Å and show that the asymmetric unit is the same in both crystal types.     

Crystallographic and spectroscopic studies of peroxide-derived myoglobin compound II and occurrence of protonated FeIV O

High resolution crystal structures of myoglobin in the pH range 5.2-8.7 have been used as models for the peroxide-derived compound II intermediates in heme peroxidases and oxygenases. The observed Fe-O bond length (1.86-1.90 A) is consistent with that of a single bond. The compound II state of myoglobin in crystals was controlled by single-crystal microspectrophotometry before and after synchrotron data collection. We observe some radiation-induced changes in both compound II (resulting in intermediate H) and in the resting ferric state of myoglobin. These radiation-induced states are quite unstable, and compound II and ferric myoglobin are immediately regenerated through a short heating above the glass transition temperature (<1 s) of the crystals. It is unclear how this influences our compound II structures compared with the unaffected compound II, but some crystallographic data suggest that the influence on the Fe-O bond distance is minimal. Based on our crystallographic and spectroscopic data we suggest that for myoglobin the compound II intermediate consists of an Fe(IV)-O species with a single bond. The presence of Fe(IV) is indicated by a small isomer shift of delta = 0.07 mm/s from M?ssbauer spectroscopy. Earlier quantum refinements (crystallographic refinement where the molecular-mechanics potential is replaced by a quantum chemical calculation) and density functional theory calculations suggest that this intermediate H species is protonated.     

Crystallization of hen egg-white avidin in a tetragonal form

Hen egg-white avidin has been crystallized at pH 5.7 from ammonium sulfate solutions. The crystals belong to the tetragonal space group P4(2)2(1)2, with unit cell edges a = b = 79.6 A, c = 84.3 A. Assuming a molecular weight of 15,600 per avidin monomer, this crystal form is compatible with the presence of a dimer in the asymmetric unit, and is suitable for a crystallographic structural investigation at high resolution.     

Purification, crystallization, and preliminary X-ray diffraction analysis of rat kidney annexin V, a calcium-dependent phospholipid-binding protein

We have purified annexin V, a monomeric 35-kDa protein, from rat kidney using calcium-dependent phospholipid chromatography. The identity of annexin V was confirmed by immunoblot analysis using monospecific anti-annexin V antibody. Large single crystals of annexin V in the presence of calcium have been grown from ammonium sulfate under a variety of conditions, with an optimum pH range of 7.5-8.0. The crystals diffract to at least 2.2 A Bragg spacing and are stable to x-rays. Preliminary crystallographic analysis reveals the space group to be R3, with hexagonal cell dimensions of a = b = 156.8 A and c = 36.9 A, and there is one molecule/asymmetric unit.     

Crystallization and preliminary X-ray investigation of lipoxygenase 1 from soybeans

Soybean lipoxygenase 1 has been crystallized by the vapor diffusion method in 8-10% polyethylene glycol (average Mr 3400), 0.2 M sodium acetate buffer, pH 5.2-5.6, at a protein concentration of 6-12 mg/ml. Microseeding was employed to obtain growth of large single crystals. The crystals, which diffract to at least 2.2-A spacings, are monoclinic and of space group P2(1). Cell constants are: a = 95.4, b = 94.2, and c = 50.4 A and beta = 91.4 degrees. The calculated value of Vm (2.41 A3/Da) is consistent with the probable presence of one molecule of lipoxygenase/crystallographic asymmetric unit (Z = 2).     

Enzymatic degradation processes of lamellar crystals in thin films for poly[(R)-3-hydroxybutyric acid] and its copolymers revealed by real-time atomic force microscopy

Enzymatic degradation processes of flat-on lamellar crystals in melt-crystallized thin films of poly[(R)-3-hydroxybutyric acid] (P(3HB)) and its copolymers were characterized by real-time atomic force microscopy (AFM) in a phosphate buffer solution containing PHB depolymerase from Ralstonia pickettii T1. Fiberlike crystals with regular intervals were generated along the crystallographic a axis at the end of lamellar crystals during the enzymatic degradation. The morphologies and sizes of the fiberlike crystals were markedly dependent on the compositions of comonomer units in the polyesters. Length, width, interval, and thickness of the fiberlike crystals after the enzymatic degradation for 2 h were measured by AFM, and the dimensions were related to the solid-state structures of P(3HB) and its copolymers. The width and thickness decreased at the tip of fiberlike crystals, indicating that the enzymatic degradation of crystals takes place not only along the a axis but also along the b and c axes. These results from AFM measurement were compared with the data on crystal size by wide-angle X-ray diffraction, and on lamellar thickness and long period by small-angle X-ray scattering. In addition, the enzymatic erosion rate of flat-on lamellar crystals along the a axis was measured from real-time AFM height images. A schematic glacier model for the enzymatic degradation of flat-on lamellar crystals of P(3HB) by PHB depolymerase has been proposed on the basis of the AFM observations.     

Patch averaging of electron images of GP3*I crystals with variable thickness.

The combination of Fourier and correlation averaging techniques with multivariate statistical analysis and classification, a method known as patch averaging, is used to analyze untilted and tilted images of negatively stained GP32*I crystals, which exhibit variable thicknesses in a single crystal. Within a single image, coherent areas of the same apparent thickness can be distinguished from areas of differing thicknesses. Analysis using the phase relationships among symmetry-related reflections from reconstituted images obtained from untilted micrographs confirms the ability of the method to classify these variable thicknesses properly. Furthermore, the phases from some of the reconstituted images obtained from both untilted and tilted micrographs were found to match well with the phases in a previously determined three-dimensional data set of this crystal with pg symmetry along the crystallographic b axis. These results indicate the utility of the patch averaging procedures in the structural determination of protein crystals with different thicknesses.     

Crystals of Lumbricus erythrocruorin

Lumbricus terrestris erythrocruorin, a 3.9 X 10(6) Mr respiratory protein, has been crystallized in four different forms. Despite the high molecular symmetry apparent from images in electron micrographs, only one crystal form expresses any molecular symmetry as crystallographic symmetry. The lattice parameters provide upper limits on the molecular dimensions of 267 A X 308 A X 172 A (1 A = 0.1 nm), which agree well with dimensions obtained from electron micrographs of negatively stained molecules. We have collected diffraction data to 5.5 A from type III crystals and have begun a structural analysis.     

Crystallization and preliminary crystallographic analysis of San Miguel sea lion virus: an animal calicivirus

The Caliciviridae is a family of nonenveloped, icosahedral, positive-sense single-stranded RNA viruses. This family of viruses consists of both animal and human pathogens. Adapting human caliciviruses to cell culture has not been successful, whereas some animal caliciviruses, including San Miguel sea lion virus, have been successfully propagated in vitro. Here we report the crystallization of San Miguel sea lion virus serotype 4 (SMSV4) and the preliminary X-ray crystallographic analysis of the crystals. SMSV4 have been crystallized using the hanging-drop method. These crystals diffracted to approximately 3A resolution using a synchrotron radiation source. A single crystal under cryo-conditions yielded a complete set of diffraction data. Data processing of the diffraction patterns showed that SMSV crystals belong to I23 space group with cell dimensions a=b=c=457 A. The crystallographic asymmetric unit includes five icosahedral asymmetric units, each consisting of three capsid protein subunits. In the space group I23, given the icosahedral symmetry and the size of the virus particle, the location of the particle is constrained to be at the point where the crystallographic 2- and 3-fold axes intersect. The orientation of the virus particle in the unit cell was ascertained by self-rotation function calculations.     

Equivalence of the projected structure of thin catalase crystals preserved for electron microscopy by negative stain,glucose or embedding in the presence of tannic acid

Thin crystals of beef liver catalase have been examined by electron microscopy following various preservation procedures. In the first part of this investigation, micrographs of three principal projections were obtained from thin sections of micro-crystals embedded in the presence of tannic acid. Computer reconstructions confirmed the space group assignment of P2₁2₁2₁ and permitted the packing arrangement of the catalase tetramers to be deduced to a resolution of about 20 Å. These results corroborate the packing model for this crystal form proposed by Unwin (1975) on the basis of molecular modeling of one projection. In the second part of this investigation, the projected structures of the thin crystals in various preserving media were compared. The negative contrasting of crystals embedded in the presence of tannic acid was confirmed by direct comparison with nonembedded, negatively stained thin platelet crystals. In addition, good agreement at 20 Å resolution was observed between the structure of negatively stained crystals and the structure of crystal platelets preserved in glucose and examined by lowdose methods, while moderate agreement was established with the published data of Taylor (1978) for crystals embedded in thin ice films. Tannic acid alone was also found to serve as a suitable medium for preserving catalase crystals to a resolution of 3.7 Å as judged by electron diffraction. Overall, we demonstrate that projections obtained from thin sections of catalase crystals embedded in the presence of tannic acid can provide a reliable, negatively contrasted representation of the protein structure to 20 Å resolution. Examination of sectioned crystals could thus provide a useful adjunct to X-ray crystallographic studies of protein crystals and three-dimensional reconstruction of crystal thin sections should ultimately be possible.     

A maximum likelihood approach to two-dimensional crystals

Maximum likelihood (ML) processing of transmission electron microscopy images of protein particles can produce reconstructions of superior resolution due to a reduced reference bias. We have investigated a ML processing approach to images centered on the unit cells of two-dimensional (2D) crystal images. The implemented software makes use of the predictive lattice node tracking in the MRC software, which is used to window particle stacks. These are then noise-whitened and subjected to ML processing. Resulting ML maps are translated into amplitudes and phases for further processing within the 2dx software package. Compared with ML processing for randomly oriented single particles, the required computational costs are greatly reduced as the 2D crystals restrict the parameter search space. The software was applied to images of negatively stained or frozen hydrated 2D crystals of different crystal order. We find that the ML algorithm is not free from reference bias, even though its sensitivity to noise correlation is lower than for pure cross-correlation alignment. Compared with crystallographic processing, the newly developed software yields better resolution for 2D crystal images of lower crystal quality, and it performs equally well for well-ordered crystal images.