Optimized synthesis of (Z)-3-hexen-1-yl caproate using germinated rapeseed lipase in organic solvent

(Z)-3-hexen-1-yl esters are important green top-note components of food flavors and fragrances. Effects of various process conditions on (Z)-3-hexen-1-yl caproate synthesis employing germinated rapeseed lipase acetone powder in organic solvent were investigated. Rapeseed lipase catalyzed ester formation more efficiently with non-polar compared to polar solvents despite high enzyme stability in both types of solvents. Maximum ester yield (90%) was obtained when 0.125 M (Z)-3-hexen-1-ol and caproic acid were reacted at 25 °C for 48 h in the presence of 50 g/L enzyme in heptane. Enzyme showed little sensitivity towards a_w with optimum yield at 0.45, while added water did not affect ester yield. Esterification reduced by increasing molecular sieves (>0.0125%, w/v). The highest yields of caproic acid were obtained with isoamyl alcohol (93%) followed by butanol and (Z)-3-hexen-1-o1 (88%) respectively reflecting the enzyme specificity for straight and branched chain alcohols. Secondary alcohols showed low reactivity, while tertiary alcohol had either very low reactivity or not esterified at all. A good relationship has been found between ester synthesis and the solvent polarity (log P value); while no correlation for the effect of solvents on residual enzyme activity was observed. It may be concluded that germinated rapeseed lipase is a promising biocatalyst for the synthesis of valuable green flavor note compound. The enzyme also showed a wide range of temperature stability (5–50 °C).     

Sol–gels and cross-linked aggregates of lipase PS from Burkholderia cepacia and their application in dry organic solvents

Lipase PS from Burkholderia cepacia (formerly Pseudomonas cepacia) was successfully immobilized in sol–gels under low methanol conditions using lyophilization in order to dry the gel. The enzyme was also cross-linked with glutaraldehyde to CLEAs without any additives. These immobilized enzyme preparations were employed for the highly enantioselective acylations of 1-phenylethanol (1), 1-(2-furyl)ethanol (2) and N-acylated 1-amino-2-phenylethanol (3) with vinyl acetate in organic solvents. Enzymatic hydrolysis of the obtained ester product was observed as a side reaction of the acylation of 3 in the presence of lipase PS powder. Hydrolysis was suppressed when the immobilized preparations of lipase PS were used.     

Covalent coupling method for lipase immobilization on controlled pore silica in the presence of nonenzymatic proteins

Candida rugosa lipase was covalently immobilized on silanized controlled pore silica previously activated with glutaraldehyde in the presence of nonenzymatic proteins. This strategy is suggested to protect the enzyme from aggregation effects or denaturation that occurs as a result of the presence of silane precursors used in the formation of the silica matrix. The immobilization yield was evaluated as a function of the lipase loading and the additive type (albumin and lecithin) using statistical concepts. In agreement with the mathematical model, the maximum coupling yield (32.2%) can be achieved working at high lipase loading (450 units x g(-1) support) using albumin as an additive. In these conditions, the resulting immobilized lipase exhibits high hydrolytic (153.2 U x mg(-1)) and esterification (337.6 mmol x g(-1) x min) activities. The enhanced activity of the final lipase derivative is the sum of the benefits of the immobilization (that prevents enzyme aggregation) and the lipase coating by additives that increases the accessibility of active sites to the substrate.     

Lipase of <Emphasis Type="Italic">Aspergillus niger</Emphasis> NCIM 1207: A Potential Biocatalyst for Synthesis of Isoamyl Acetate

Commercial lipase preparations and mycelium bound lipase from Aspergillus niger NCIM 1207 were used for esterification of acetic acid with isoamyl alcohol to obtain isoamyl acetate. The esterification reaction was carried out at 30°C in n-hexane with shaking at 120 rpm. Initial reaction rates, conversion efficiency and isoamyl acetate concentration obtained using Novozyme 435 were the highest. Mycelium bound lipase of A. niger NCIM 1207 produced maximal isoamyl acetate formation at an alcohol/acid ratio of 1.6. Acetic acid at higher concentrations than required for the critical alcohol/acid ratio lower than 1.3 and higher than 1.6 resulted in decreased yields of isoamyl acetate probably owing to lowering of micro-aqueous environmental pH around the enzyme leading to inhibition of enzyme activity. Mycelium bound A. niger lipase produced 80 g/l of isoamyl acetate within 96 h even though extremely less amount of enzyme activity was used for esterification. The presence of sodium sulphate during esterification reaction at higher substrate concentration resulted in increased conversion efficiency when we used mycelium bound enzyme preparations of A. niger NCIM 1207. This could be due to removal of excess water released during esterification reaction by sodium sulphate. High ester concentration (286.5 g/l) and conversion (73.5%) were obtained within 24 h using Novozyme 435 under these conditions.     

Immobilized Pseudomonas cepacia lipase for biodiesel fuel production from soybean oil

Enzymatic transesterification of soybean oil with methanol and ethanol was studied. Of the nine lipases that were tested in the initial screening, lipase PS from Pseudomonas cepacia resulted in the highest yield of alkyl esters. Lipase from Pseudomonas cepacia was further investigated in immobilized form within a chemically inert, hydrophobic sol-gel support. The gel-entrapped lipase was prepared by polycondensation of hydrolyzed tetramethoxysilane and iso-butyltrimethoxysilane. Using the immobilized lipase PS, the effects of water and alcohol concentration, enzyme loading, enzyme thermal stability, and temperature in the transesterification reaction were investigated. The optimal conditions for processing 10 g of soybean oil were: 35 degrees C, 1:7.5 oil/methanol molar ratio, 0.5 g water and 475 mg lipase for the reactions with methanol, and 35 degrees C, 1:15.2 oil/ethanol molar ratio, 0.3 g water, 475 mg lipase for the reactions with ethanol. Subject to the optimal conditions, methyl and ethyl esters formation of 67 and 65 mol% in 1h of reaction were obtained for the immobilized enzyme reactions. Upon the reaction with the immobilized lipase, the triglycerides reached negligible levels after the first 30 min of the reaction and the immobilized lipase was consistently more active than the free enzyme. The immobilized lipase also proved to be stable and lost little activity when was subjected to repeated uses.     

Green leaf volatiles and oxygenated metabolite emission bursts from mesquite branches following light–dark transitions

Green leaf volatiles (GLVs) are a diverse group of fatty acid-derived compounds emitted by all plants and are involved in a wide variety of developmental and stress-related biological functions. Recently, GLV emission bursts from leaves were reported following light–dark transitions and hypothesized to be related to the stress response while acetaldehyde bursts were hypothesized to be due to the ‘pyruvate overflow’ mechanism. In this study, branch emissions of GLVs and a group of oxygenated metabolites (acetaldehyde, ethanol, acetic acid, and acetone) derived from the pyruvate dehydrogenase (PDH) bypass pathway were quantified from mesquite plants following light–dark transitions using a coupled GC–MS, PTR-MS, and photosynthesis system. Within the first minute after darkening following a light period, large emission bursts of both C₅ and C₆ GLVs dominated by (Z)-3-hexen-1-yl acetate together with the PDH bypass metabolites are reported for the first time. We found that branches exposed to CO₂-free air lacked significant GLV and PDH bypass bursts while O₂-free atmospheres eliminated the GLV burst but stimulated the PDH bypass burst. A positive relationship was observed between photosynthetic activity prior to darkening and the magnitude of the GLV and PDH bursts. Photosynthesis under ¹³CO₂ resulted in bursts with extensive labeling of acetaldehyde, ethanol, and the acetate but not the C₆-alcohol moiety of (Z)-3-hexen-1-yl acetate. Our observations are consistent with (1) the “pyruvate overflow” mechanism with a fast turnover time (<1 h) as part of the PDH bypass pathway, which may contribute to the acetyl-CoA used for the acetate moiety of (Z)-3-hexen-1-yl acetate, and (2) a pool of fatty acids with a slow turnover time (>3 h) responsible for the C₆ alcohol moiety of (Z)-3-hexen-1-yl acetate via the 13-lipoxygenase pathway. We conclude that our non-invasive method may provide a new valuable in vivo tool for studies of acetyl-CoA and fatty acid metabolism in plants at a variety of spatial scales.     

Enzymatic synthesis of isoamyl acetate using immobilized lipase from Rhizomucor miehei

The effects of important reaction parameters for enhancing isoamyl acetate formation through lipase-catalyzed esterification of isoamyl alcohol were investigated in this study. Increase in substrate (acid) concentration led to decrease in conversions. A critical enzyme concentration of 3 g l(-1) was detected for a substrate concentration of 0.06 M (each of alcohol and acid). Solvents with partition coefficient higher than 1000 (log P>3.0) supported enzyme activity to give high conversions. Acetic acid at higher concentrations could not be esterified easily probably owing to its role in lowering the microaqueous pH of the enzyme. Extraneous water/buffer addition decreased the isoamyl acetate yields slightly ( approximately 10%) at 0.005-0.01% v/v of the reaction mixture and drastically (>40%) at above 0.01% v/v. Buffer saturation of the organic solvent employed improved esterification (upto two-fold), particularly at moderately higher substrate concentrations (>0.18 M). Employing acetic anhydride instead of acetic acid resulted in a two-fold increase in the yields (at 0.25 M substrate). Use of excess nucleophile (alcohol) concentration by increasing the alcohol/acid molar ratio resulted in higher conversions in shorter duration (upto eight-fold even at 1.5 M acetic acid). Yields above 80% were achieved with substrate concentrations as high as 1.5 M and more than 150 g l(-1) isoamyl acetate concentrations were obtained employing a relatively low enzyme concentration of 10 g l(-1). The operational stability of lipase was also observed to be reasonably high enabling ten reuses of the biocatalyst.     

Enhanced attraction of Plutella xylostella (Lepidoptera: Plutellidae) to pheromone-baited traps with the addition of green leaf volatiles

Diamondback moth, Plutella xylostella (L.) (Lepidoptera: Plutellidae), is one of the most serious pests of Brassicaceae crops worldwide. Electrophysiological and behavioral responses of P. xylostella to green leaf volatiles (GLVs) alone or together with its female sex pheromone were investigated in laboratory and field. GLVs 1-hexanol and (Z)-3-hexen-1-ol elicited strong electroantennographic responses from unmated male and female P. xylostella, whereas (Z)-3-hexenyl acetate only produced a relatively weak response. The behavioral responses of unmated moths to GLVs were further tested in Y-tube olfactometer experiments. (E)-2-Hexenal, (Z)-3-hexen-1-ol, and (Z)-3-hexenyl acetate induced attraction of males, reaching up to 50%, significantly higher than the response to the unbaited control arm. In field experiments conducted in 2008 and 2009, significantly more moths were captured in traps baited with synthetic sex pheromone with either (Z)-3-hexenyl acetate alone or a blend of (Z)-3-hexenyl acetate, (Z)-3-hexen-1-ol, and (E)-2-hexenal compared with sex pheromone alone and other blend mixtures. These results demonstrated that GLVs could be used to enhance the attraction of P. xylostella males to sex pheromone-baited traps.     

Enhanced activity and enantioselectivity of Candida rugosa lipase immobilized on macroporous adsorptive resins for ibuprofen resolution

The lipase from Candida rugosa was immobilized on three commercially available macroporous adsorptive resins for kinetic resolution of ibuprofen. One resin, CRB02, increased the enzyme activity by 50% to 0.027 g g(-1) min(-1). The deactivation constant (0.19 h(-1)) of the immobilized enzyme was half of that of the native enzyme and the enantioselectivity (E = 29.2) of the immobilized lipase was 2.2 times as much as that of the native lipase for the kinetic resolution of ibuprofen with 1-propanol in isooctane at 30 degrees C.     

Synthesis of 2-ethyl hexanol fatty acid esters in a packed bed bioreactor using a lipase immobilized on a textile membrane

An enzymatic process using a packed bed bioreactor with recirculation was developed for the scale-up synthesis of 2-ethylhexyl palmitate with a lipase from Candida sp. 99–125 immobilized on a fabric membrane by natural attachment to the membrane surface. Esterification was effectively performed by circulating the reaction mixture between a packed bed column and a substrate container. A maximum esterification yield of 98% was obtained. Adding molecular sieves and drying the immobilized lipase both decreased the water content at the reactor outlet and around the enzyme, which led to an increase in the rate of esterification. The long-term stability of the reactor was tested by continuing the reaction for 30 batches (over 300 h) with an average esterification yield of about 95%. This immobilized lipase bioreactor is scalable and is thus suitable for industrial production of 2-ethylhexyl palmitate.     

Immobilization of lipases for non-aqueous synthesis

Immobilization of lipases involves many levels of complications relating to the structure of the active site and its interactions with the immobilization support. Interaction of the so called hydrophobic ‘lid’ with the support has been reported to affect synthetic activity of an immobilized lipase. In this work we evaluate and compare the synthetic activity of lipases from different sources immobilized on different kinds of supports with varying hydrophobicity. Humicola lanuginosa lipase, Candida antarctica lipase B and Rhizomucor miehei lipase were physically adsorbed onto two types of hydrophobic carriers, namely hydrophilic carriers with conjugated hydrophobic ligands, and supports with base matrix hydrophobicity. The prepared immobilized enzymes were used for acylation of n-butanol with oleic acid as acyl donor in iso-octane with variable water content (0–2.8%, v/v) as reaction medium. Enzyme activity and effect of water on the activity of the immobilized derivatives were compared with those of respective soluble lipases and a commercial immobilized lipase Novozyme 435. Both R. miehei and H. lanuginosa immobilized lipases showed maximum activity at 1.39% (v/v) added water concentration. Sepabeads, a methacrylate based hydrophilic support with conjugated octadecyl chain showed highest immobilized esterification (synthetic) activity for all three enzymes, and of the three R. miehei lipase displayed maximum esterification activity comparable to the commercial enzyme.     

Synthesis of 4-nitrophenyl acetate using molecular sieve-immobilized lipase from <Emphasis Type="Italic">Bacillus coagulans</Emphasis>

Extracellular lipase from Bacillus coagulans BTS-3 was immobilized on (3 Å × 1.5 mm) molecular sieve. The molecular sieve showed approximately 68.48% binding efficiency for lipase (specific activity 55 IU mg^?1). The immobilized enzyme achieved approx 90% conversion of acetic acid and 4-nitrophenol (100 mM each) into 4-nitrophenyl acetate in n-heptane at 65°C in 3 h. When alkane of C-chain length other than n-heptane was used as the organic solvent, the conversion of 4-nitrophenol and acetic acid was found to decrease. About 88.6% conversion of the reactants into ester was achieved when reactants were used at molar ratio of 1:1. The immobilized lipase brought about conversion of approximately 58% for esterification of 4-nitrophenol and acetic acid into 4-nitrophenyl acetate at a temperature of 65°C after reuse for 5 cycles.     

Response of female Cydia molesta (Lepidoptera: Tortricidae) to plant derived volatiles

Peach shoot volatiles were attractive to mated female oriental fruit moth, Cydia molesta (Busck), in a dual choice arena. No preference was observed between leaf odours from the principle host plant, peach, and the secondary host plant, apple. Twenty-two compounds were identified in headspace volatiles of peach shoots using gas chromatography-mass spectrometry. Green leaf volatiles accounted for more than 50% of the total emitted volatiles. A bioassay-assisted fractionation using different sorbent polymers indicated an attractant effect of compounds with a chain length of 6-8 carbon atoms. The major compounds of this fraction were tested either singly or in combinations for behavioural response of females. Significant bioactivity was found for a three-component mixture of (Z)-3-hexen-1-yl acetate, (Z)-3-hexen-1-ol and benzaldehyde in a 4:1:1 ratio. This synthetic mixture elicited a similar attractant effect as the full natural blend from peach shoots as well as the bioactive fraction.     

Immobilization of lipase B from Candida antarctica on porous styrene-divinylbenzene beads improves butyl acetate synthesis

A new biocatalyst of lipase B from Candida antarctica (MCI-CALB) immobilized on styrene-divinylbenzene beads (MCI GEL CHP20P) was compared with the commercial Novozym 435 (immobilized lipase) in terms of their performances as biocatalysts for the esterification of acetic acid and n-butanol. The effects of experimental conditions on reaction rates differed for each biocatalyst, showing different optimal values for water content, temperature, and substrate molar ratio. MCI-CALB could be used at higher acid concentrations, up to 0.5 M, while Novozym 435 became inactivated at these acid concentrations. Although Novozym 435 exhibited 30% higher initial activity than MCI-CALB for the butyl acetate synthesis, the reaction course was much more linear using the new preparation, meaning that the MCI-CALB allows for higher productivities per cycle. Both preparations produced around 90% of yield conversions after only 2 h of reaction, using 10% (mass fraction) of enzyme. However, the main advantage of the new biocatalyst was the superior performance during reuse. While Novozym 435 was fully inactivated after only two batches, MCI-CALB could be reused for six consecutive cycles without any washings and keeping around 70% of its initial activity. It is proposed that this effect is due to the higher hydrophobicity of the new support, which does not retain water or acid in the enzyme environment. MCI-CALB has shown to be a very promising biocatalyst for the esterification of small-molecule acids and alcohols.     

Stereoselective enzymatic esterification of 3-benzoylthio-2-methylpropanoic acid

Summary A key intermediate, S-(–)-3-benzoylthio-2-methylpropanoic acid (1) was made in high optical purity by the lipase-catalyzed stereoselective esterification of racemic 1 with methanol in an organic solvent system. Among various lipases evaluated, Amano P-30 lipase from Pseudomonas sp. efficiently catalyzed the esterification of 1 to yield R-(+) methyl ester and unreacted S-(–) 1. A reaction yield of 40 mol% and an optical purity of 97.2% were obtained for compound 1 at a substrate concentration of 0.1 m (22 mg/ml). Lipase P-30 was immobilized on Accurel polypropylene (PP) and the immobilized enzyme was reused (23 cycles) in the esterification reaction without loss of enzyme acitivity, productivity or optical purity. Among various solvents evaluated, toluene was found to be the most suitable organic solvent and methanol was the best alcohol for the esterification of racemic 1 by immobilized lipase. Substrate concentrations as high as 1.0 m were used in the esterification reaction. When the temperature was increased from 28° C to 60° C, the reaction time required for the esterification of 0.1 m substrate decreased from 16 h to 2 h. On increasing the methanol to substrate molar ratio from 1:1 to 4:1, the rate of esterification decreased. A lipase fermentation using Pseudomonas sp. ATCC 21 808 was developed. In the batch-fermentation process, 56 units/ml of extracellular lipase activity was obtained. A fed-batch process using soybean oil gave a significant increase in the lipase activity (126 units/ml). Crude lipase recovered from the filtrate by ethanol precipitation and immobilized on Accurel PP was also effective: S-(–) compound 1 was obtained in 35 mol% yield and 95% optical purity. Offsprint requests to: R. N. Patel     

Enhanced activity and stability of immobilized lipases by treatment with polar solvents prior to lyophilization

Lipases from Candida rugosa, Mucor javanicus and Rhizopus oryzae were respectively adsorbed on Amberlite XAD-7 followed by incubation in 2-propanol and then lyophilization. The activities of the immobilized enzymes were 1.6–3.4 times higher than those of the immobilized enzymes without incubation in the organic solvent before lyophilization for esterification of lauric acid (0.1 M) and 1-propanol (0.1 M) in isooctane at 37 °C. The immobilized C. rugosa lipase (Sigma) without the incubation did not show any activity but displayed considerable activity (19.8 μmol h⁻¹ mg⁻¹) after the incubation before lyophilization. Besides 2-propanol, acetone, 1-propanol and ethyl acetate were also found to be good solvents for treating M. javanicus lipase immobilized on Amberlite XAD-7 and acetone was the best among them. When incubated in isooctane at 25 °C for 120 h, the immobilized M. javanicus lipase prepared by incubation in acetone for 1 h before lyophilization retained 70% of its initial activity while the immobilized enzyme without the solvent treatment kept only 50% of its initial activity.     

月桂酸生物印迹对脂肪酶酯化活力的影响

生物印迹是改良酶学特性,扩大脂肪酶工业应用领域的新兴技术。本研究结合溶胶-凝胶脂肪酶固定化工艺,以甲基三甲氧基硅烷（MTMS）和四甲氧基硅烷（TMOS）为前驱体,月桂酸为印迹分子,考察了月桂酸生物印迹对脂肪酶PS酯化活力的影响。脂肪酶酯化活力测定及扫描电镜观察表明生物印迹能显著提高脂肪酶的活性及稳定性。印迹体系经正交试验优化获得的最优条件为：水和硅烷摩尔比（R）为12,聚乙二醇（PEG）加入量为120μl,月桂酸加入量为0.15mmol。在最优反应条件下,印迹酶相对于游离酶比活力提高了44.3倍,相对于未印迹固定化酶提高了2.4倍;印迹酶具有较好的热稳定性,在80℃下处理0.5h后,残余酶活分别为58%,而游离酶未检测到活性。     

Green synthesis of isoamyl acetate via silica immobilized novel thermophilic lipase from <Emphasis Type="Italic">Bacillus aerius</Emphasis>

Isoamyl acetate, a pear or banana flavor, is widely used in food, beverage, cosmetic, and pharmaceutical industries. In the present work, lipase from Bacillus aerius was immobilized on silica gel matrix in the presence of a cross-linking agent, glutaraldehyde, and its efficiency in synthesizing isoamyl acetate using esterification reaction was studied. The esterification of acetic acid and isoamyl alcohol by silica-bound lipase was studied as a function of time and temperatures. The incubation time of 10 h, temperature of 55°C, substrate molar ratio 1: 1, and the amount of lipase as 1% were found to be optimal for the esterification reaction. The bound lipase catalyzed the esterification of acetic acid by isoamyl alcohol with the yield of about 68% under the optimized reaction conditions. The product was identified as isoamyl acetate using gas-liquid chromatography, nuclear magnetic resonance, and Fourier transform IR spectroscopy analysis by the presence of an ester group at the wavenumber of 1720.5 cm^–1.     

Amino silicones finished fabrics for lipase immobilization: Fabrics finishing and catalytic performance of immobilized lipase

Finishing of silk fabric was achieved by using amino-functional polydimethylsiloxane (PDMS) and lipase from Candida sp. 99-125 was immobilized on the treated silk fabrics. Hydrophobic fabrics were obtained by dipping the native fabric in 0.125–0.25% (w/v) PDMS solution and dried at 70 °C. The direct adsorption on PDMS-treated fabric was verified to be a better strategy for lipase immobilization than that by covalent binding. Compared to unfinished fabrics, the hydrolytic activity of immobilized enzyme on the finished fabric was improved by 1.6 times. Moreover, the activity of immobilized enzymes on hydrophobic fabrics was significantly improved in different concentrations of strong polar solvents such as methanol and ethanol, and in common organic solvents with different octanol–water partition coefficients (Log P). Enzymatic activity and stability in 15% water content system (added water accounted for the total reaction mixtures, v/v) showed more than 30% improvement in each batch. The amino–silicone finished fabric surface was investigated by scanning electron microscopy and X-ray photoelectron spectroscopy. The hydrophobic fabric immobilized enzyme could be recycled for more than 80 times with no significant decrease in esterification activity. PDMS-treated woven silk fabrics could be a potential support for lipase immobilization in catalytic esterification processes.