Direct production of ethanol from neoagarobiose using recombinant yeast that secretes α-neoagarooligosaccharide hydrolase

An α-neoagarooligosaccharide hydrolase, AgaNash, was purified from Cellvibrio sp. OA-2007, which utilizes agarose as a substrate. The agaNash gene, which encodes AgaNash, was obtained by comparing the N-terminal amino acid sequence of AgaNash with that deduced from the nucleotide sequence of the full-length OA-2007 genome. The agaNash gene combined with the Saccharomyces cerevisiae signal peptide α-mating factor was transformed into the YPH499 strain of S. cerevisiae to generate YPH499/pTEF-MF-agaNash, and the recombinant yeast was confirmed to produce AgaNash, though it was mainly retained within the recombinant cell. To enhance AgaNash secretion from the cell, the signal peptide was replaced with a combination of the signal peptide and a threonine- and serine-rich tract (T-S region) of the S. diastaticus STA1 gene. The new recombinant yeast, YPH499/pTEF-STA1SP-agaNash, was demonstrated to secrete AgaNash and hydrolyze neoagarobiose with an efficiency of as high as 84%, thereby producing galactose, which is a fermentable sugar for the yeast, and ethanol, at concentrations of up to 1.8 g/L, directly from neoagarobiose.     

Escherichia coli signal peptidase recognizes and cleaves the signal sequence of α-amylase originating from Bacillus licheniformis

The gene encoding the α-amylase from Bacillus licheniformis was cloned, with and without the native signal sequence, and expressed in Escherichia coli, resulting in the production of the recombinant protein in the cytoplasm as insoluble but enzymatically active aggregates. Expression with a low concentration of the inducer at low temperature resulted in the production of the recombinant protein in soluble form in a significantly higher amount. The protein produced with signal sequence was exported to the extracellular medium, whereas there was no export of the protein produced from the gene without the signal sequence. Similarly, the α-amylase activity in the culture medium increased with time after induction in case of the protein produced with signal sequence. Molecular mass determinations by MALDI-TOF mass spectrometry and N-terminal amino acid sequencing of the purified recombinant α-amylase from the extracellular medium revealed that the native signal peptide was cleaved by E. coli signal peptidase between Ala28 and Ala29. It seems possible that the signal peptide of α-amylase from B. licheniformis can be used for the secretion of other recombinant proteins produced using the E. coli expression system.     

<Emphasis Type="Italic">Escherichia coli</Emphasis> signal peptidase recognizes and cleaves archaeal signal sequence

Tk1884, an open reading frame encoding α-amylase in Thermococcus kodakarensis, was cloned with the native signal sequence and expressed in Escherichia coli. Heterologous gene expression resulted in secretion of the recombinant protein to the extracellular culture medium. Extracellular α-amylase activity gradually increased after induction. Tk1884 was purified from the extracellular medium, and its molecular mass determined by electrospray ionization mass spectrometry indicated the cleavage of a few amino acids. The N-terminal amino acid sequence of the purified Tk1884 was determined, which revealed that the signal peptide was cleaved between Ala26 and Ala27 by E. coli signal peptidase. To the best of our knowledge, this is the first report describing an archaeal signal sequence recognized and cleaved by E. coli signal peptidase.     

<Emphasis Type="Italic">Escherichia coli</Emphasis> signal peptidase recognizes and cleaves the signal sequence of xylanase from a newly isolated <Emphasis Type="Italic">Bacillus subtilis</Emphasis> strain R5

A gene encoding the xylanase from Bacillus subtilis strain R5 containing the native signal sequence was cloned and expressed in Escherichia coli. The heterologous expression of the gene resulted in the production of the recombinant protein in the cytoplasm as well as its secretion into the culture medium. The xylanase activity in the culture medium increased with time after induction up to 90% of the total activity in 14 h. Molecular mass and N-terminal amino acid sequence determinations of the purified recombinant xylanase revealed that the native signal peptide was cleaved off by E. coli signal peptidases between Ala28 and Ala29.     

Characterization of an endoglucanase belonging to a new subfamily of glycoside hydrolase family 45 of the basidiomycete Phanerochaete chrysosporium

The wood decay fungus Phanerochaete chrysosporium has served as a model system for the study of lignocellulose conversions, but aspects of its cellulolytic system remain uncertain. Here, we report identifying the gene that encodes the glycoside hydrolase (GH) family 45 endoglucanase (EG) from the fungus, cloning the cDNA, determining its heterologous expression in the methylotrophic yeast Pichia pastoris, and characterizing the recombinant protein. The cDNA consisted of 718 bp, including an open reading frame encoding a 19-amino-acid signal peptide, a 7-amino-acid presequence at the N-terminal region, and a 180-amino-acid mature protein, which has no cellulose binding domain. Analysis of the amino acid sequence revealed that the protein has a low similarity (<22%) to known fungal EGs belonging to the GH family 45 (EGVs). No conserved domain of this family was found by a BLAST search, suggesting that the protein should be classified into a new subdivision of this GH family. The recombinant protein has hydrolytic activity toward amorphous cellulose, carboxylmethyl cellulose, lichenan, barley beta-glucan, and glucomannan but not xylan. Moreover, a synergistic effect was observed with the recombinant GH family 6 cellobiohydrolase from the same fungus toward amorphous cellulose as a substrate, indicating that the enzyme may act in concert with other cellulolytic enzymes to hydrolyze cellulosic biomass in nature.     

Multidomain Structure and Cellulosomal Localization of the Clostridium thermocellum Cellobiohydrolase CbhA

The nucleotide sequence of the Clostridium thermocellum F7 cbhA gene, coding for the cellobiohydrolase CbhA, has been determined. An open reading frame encoding a protein of 1,230 amino acids was identified. Removal of a putative signal peptide yields a mature protein of 1,203 amino acids with a molecular weight of 135,139. Sequence analysis of CbhA reveals a multidomain structure of unusual complexity consisting of an N-terminal cellulose binding domain (CBD) homologous to CBD family IV, an immunoglobulin-like β-barrel domain, a catalytic domain homologous to cellulase family E1, a duplicated domain similar to fibronectin type III (Fn3) modules, a CBD homologous to family III, a highly acidic linker region, and a C-terminal dockerin domain. The cellulosomal localization of CbhA was confirmed by Western blot analysis employing polyclonal antibodies raised against a truncated enzymatically active version of CbhA. CbhA was identified as cellulosomal subunit S3 by partial amino acid sequence analysis. Comparison of the multidomain structures indicates striking similarities between CbhA and a group of cellulases from actinomycetes. Average linkage cluster analysis suggests a coevolution of the N-terminal CBD and the catalytic domain and its spread by horizontal gene transfer among gram-positive cellulolytic bacteria.     

Recombinant expression of a GH12 β-glucanase carrying its own signal peptide from <Emphasis Type="Italic">Stachybotrys atra</Emphasis> in yeast and filamentous fungi

The β-glucanase Cel12A gene from Stachybotrys atra has been cloned and heterologously expressed in Aspergillus nidulans and Saccharomyces cerevisiae. The recombinant strains constructed, contained the exonic sequence of cel12A including its own signal peptide coding sequence. SDS-PAGE and zymography revealed that recombinant Cel12A has a molecular mass of 24 kDa which agrees with that deduced from its amino acid sequence, indicating that it is expressed in the non-glycosylated active form. Recombinant A. nidulans showed about eightfold greater activity yield than S. cerevisiae recombinant strain, namely 0.71 and 0.09 β-glucanase Units/ml of culture, respectively. In both host strains most of the activity was secreted to the extracellular media, evidencing the functionality of Cel12A signal peptide in yeast and fungi. This novel signal peptide might facilitate the expression and efficient secretion of other recombinant proteins difficult to secrete.     

Expression of human alpha-fetoprotein in yeast.

Human alpha-fetoprotein (AFP) was expressed in Saccharomyces cerevisiae, with a plasmid containing the cDNA sequence for human AFP fused with the rat AFP signal peptide. The recombinant AFP was purified from the yeast lysate by DEAE-cellulose and immunoaffinity chromatography. The amino acid composition and the molecular weight of the recombinant AFP were similar to those of hepatoma AFP. N-terminal amino acids sequence analysis indicated that the signal peptide had been processed. The recombinant and hepatoma AFP reacted identically in Ouchterlony immunodiffusion and radioimmunoassay tests. These observations indicated that the yeast recombinant protein had the properties of native AFP.     

Production of cellulosic ethanol in Saccharomyces cerevisiae heterologous expressing Clostridium thermocellum endoglucanase and Saccharomycopsis fibuligera β-glucosidase genes

Heterologous secretory expression of endoglucanase E (Clostridium thermocellum) and β-glucosidase 1 (Saccharomycopsis fibuligera) was achieved in Saccharomyces cerevisiae fermentation cultures as an α-mating factor signal peptide fusion, based on the native enzyme coding sequence. Ethanol production depends on simultaneous saccharification of cellulose to glucose and fermentation of glucose to ethanol by a recombinant yeast strain as a microbial biocatalyst. Recombinant yeast strain expressing endoglucanase and β-glucosidase was able to produce ethanol from β-glucan, CMC and acid swollen cellulose. This indicates that the resultant yeast strain of this study acts efficiently as a whole cell biocatalyst.     

Viral Preprotoxin Signal Sequence Allows Efficient Secretion of Green Fluorescent Protein by Candida glabrata, Pichia pastoris, Saccharomyces cerevisiae, and Schizosaccharomyces pombe

Besides its importance as model organism in eukaryotic cell biology, yeast species have also developed into an attractive host for the expression, processing, and secretion of recombinant proteins. Here we investigated foreign protein secretion in four distantly related yeasts (Candida glabrata, Pichia pastoris, Saccharomyces cerevisiae, and Schizosaccharomyces pombe) by using green fluorescent protein (GFP) as a reporter and a viral secretion signal sequence derived from the K28 preprotoxin (pptox), the precursor of the yeast K28 virus toxin. In vivo expression of GFP fused to the N-terminal pptox leader sequence and/or expression of the entire pptox gene was driven either from constitutive (PGK1 and TPI1) or from inducible and/or repressible (GAL1, AOX1, and NMT1) yeast promoters. In each case, GFP entered the secretory pathway of the corresponding host cell; confocal fluorescence microscopy as well as sodium dodecyl sulfate-polyacrylamide gel electrophoresis and Western analysis of cell-free culture supernatants confirmed that GFP was efficiently secreted into the culture medium. In addition to the results seen with GFP, the full-length viral pptox was correctly processed in all four yeast genera, leading to the secretion of a biologically active virus toxin. Taken together, our data indicate that the viral K28 pptox signal sequence has the potential for being used as a unique tool in recombinant protein production to ensure efficient protein secretion in yeast.     

Cloning and High-Level Expression of α-Galactosidase cDNA from Penicillium purpurogenum

The cDNA coding for Penicillium purpurogenum α-galactosidase (αGal) was cloned and sequenced. The deduced amino acid sequence of the α-Gal cDNA showed that the mature enzyme consisted of 419 amino acid residues with a molecular mass of 46,334 Da. The derived amino acid sequence of the enzyme showed similarity to eukaryotic αGals from plants, animals, yeasts, and filamentous fungi. The highest similarity observed (57% identity) was to Trichoderma reesei AGLI. The cDNA was expressed in Saccharomyces cerevisiae under the control of the yeast GAL10 promoter. Almost all of the enzyme produced was secreted into the culture medium, and the expression level reached was approximately 0.2 g/liter. The recombinant enzyme purified to homogeneity was highly glycosylated, showed slightly higher specific activity, and exhibited properties almost identical to those of the native enzyme from P. purpurogenum in terms of the N-terminal amino acid sequence, thermoactivity, pH profile, and mode of action on galacto-oligosaccharides.     

Engineering <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis> to produce feruloyl esterase for the release of ferulic acid from switchgrass

The Aspergillus niger feruloyl esterase gene (faeA) was cloned into Saccharomyces cerevisiae via a yeast expression vector, resulting in efficient expression and secretion of the enzyme in the medium with a yield of ~2 mg/l. The recombinant enzyme was purified to homogeneity by anion-exchange and hydrophobic interaction chromatography. The specific activity was determined to be 8,200 U/μg (pH 6.5, 20°C, 3.5 mM 4-nitrophenyl ferulate). The protein had a correct N-terminal sequence of ASTQGISEDLY, indicating that the signal peptide was properly processed. The FAE exhibited an optimum pH of 6–7 and operated optimally at 50°C using ground switchgrass as the substrate. The yeast clone was demonstrated to catalyze the release of ferulic acid continuously from switchgrass in YNB medium at 30°C. This work represents the first report on engineering yeast for the breakdown of ferulic acid crosslink to facilitate consolidated bioprocessing.     

The signal Peptide of a vacuolar protein is necessary and sufficient for the efficient secretion of a cytosolic protein

A cytosolic pea (Pisum sativum) seed albumin (ALB) and a chimeric protein (PHALB) consisting of the signal peptide and first three amino acids of phytohemagglutinin (PHA) and the amino acid sequence of ALB were expressed in parallel suspension cultures of tobacco (Nicotiana tabacum) cells and their intracellular fates examined. PHALB was efficiently secreted by the cells whereas ALB remained intracellular. These experiments show that the information contained in the signal peptide of a vacuolar protein is both necessary and sufficient for efficient secretion, and define secretion as a default or bulk-flow pathway. Entry into the secretory pathway was accompanied by glycosylation and the efficient conversion of the high mannose glycans into complex glycans indicating that transported glycoproteins do not need specific recognition domains for the modifying enzymes in the Golgi. Tunicamycin depressed the accumulation of the unglycosylated polypeptide in the culture medium much less than the accumulation of other glycoproteins. We interpret this as evidence that glycans on proteins that are not normally glycosylated do not have the same function of stabilizing and protecting the polypeptide as on natural glycoproteins.     

The effect of α-mating factor secretion signal mutations on recombinant protein expression in Pichia pastoris

The methylotrophic yeast, Pichia pastoris, has been genetically engineered to produce many heterologous proteins for industrial and research purposes. In order to secrete proteins for easier purification from the extracellular medium, the coding sequence of recombinant proteins is initially fused to the Saccharomyces cerevisiae α-mating factor secretion signal leader. Extensive site-directed mutagenesis of the prepro-region of the α-mating factor secretion signal sequence was performed in order to determine the effects of various deletions and substitutions on expression. Though some mutations clearly dampened protein expression, deletion of amino acids 57–70, corresponding to the predicted 3rd alpha helix of α-mating factor secretion signal, increased secretion of reporter proteins horseradish peroxidase and lipase at least 50% in small-scale cultures. These findings raise the possibility that the secretory efficiency of the leader can be further enhanced in the future.     

Engineering Signal Peptides for Enhanced Protein Secretion from Lactococcus lactis

Lactococcus lactis is an attractive vehicle for biotechnological production of proteins and clinical delivery of therapeutics. In many such applications using this host, it is desirable to maximize secretion of recombinant proteins into the extracellular space, which is typically achieved by using the native signal peptide from a major secreted lactococcal protein, Usp45. In order to further increase protein secretion from L. lactis, inherent limitations of the Usp45 signal peptide (Usp45sp) must be elucidated. Here, we performed extensive mutagenesis on Usp45sp to probe the effects of both the mRNA sequence (silent mutations) and the peptide sequence (amino acid substitutions) on secretion. We screened signal peptides based on their resulting secretion levels of Staphylococcus aureus nuclease and further evaluated them for secretion of Bacillus subtilis α-amylase. Silent mutations alone gave an increase of up to 16% in the secretion of α-amylase through a mechanism consistent with relaxed mRNA folding around the ribosome binding site and enhanced translation. Targeted amino acid mutagenesis in Usp45sp, combined with additional silent mutations from the best clone in the initial screen, yielded an increase of up to 51% in maximum secretion of α-amylase while maintaining secretion at lower induction levels. The best sequence from our screen preserves the tripartite structure of the native signal peptide but increases the positive charge of the n-region. Our study presents the first example of an engineered L. lactis signal peptide with a higher secretion yield than Usp45sp and, more generally, provides strategies for further enhancing protein secretion in bacterial hosts.     

Gateway cloning is compatible with protein secretion from Pichia pastoris

Secretion of a recombinant protein from the yeast Pichia pastoris requires the presence of a signal peptide at the amino terminus. Maintaining the full amino acid sequence of the signal peptide is thought to be important for proper signal processing and protein secretion. We show that at least for one protein, a synthetic human interferon, the presence of a Gateway recombination site within the signal peptide is fully compatible with high levels of protein secretion. The amino termini of the secreted interferon proteins cloned with Gateway and cloned with restriction enzymes and ligase are identical, and the proteins were highly active in biological assays. Compatibility with Gateway cloning simplifies construction of plasmids directing secretion of recombinant proteins from P. pastoris.     

Production of a recombinant chitin oligosaccharide deacetylase from Vibrio parahaemolyticus in the culture medium of Escherichia coli cells

An open reading frame (ORF) encoding chitin oligosaccharide deacetylase (Pa-COD) gene and its signal sequence was cloned from the Vibrio parahaemolyticus KN1699 genome and its sequence was analyzed. The ORF encoded a 427 amino acid protein, including the 22 amino acid signal sequence. The deduced amino acid sequence was highly similar to several bacterial chitin oligosaccharide deacetylases in carbohydrate esterase family 4. An expression plasmid containing the gene was constructed and inserted into Escherichia coli cells and the recombinant enzyme was secreted into the culture medium with the aid of the signal peptide. The concentration of the recombinant enzyme in the E. coli culture medium was 150 times larger than that of wild-type enzyme produced in the culture medium by V. parahaemolyticus KN1699. The recombinant enzyme was purified to homogeneity from culture supernatant in an overall yield of 16%. Substrate specificities of the wild-type and the recombinant enzymes were comparable.     

Expression of the human salivary alpha-amylase gene in yeast and characterization of the secreted protein

Recombinant plasmids were constructed in which the human salivary alpha-amylase gene, with or without the N-terminal signal sequence for secretion, was placed under control of the APase (PHO5) promoter of Saccharomyces cerevisiae. In yeast cells transformed with the alpha-amylase gene having the human signal sequence for secretion, the gene was expressed and the enzyme was secreted into the medium in three different glycosylated forms. The amylase gene without the signal sequence was also expressed in yeast, but the products were neither secreted nor glycosylated. Determination of the N-terminal amino acid (aa) sequence revealed that the 15-aa signal sequence had been cleaved from the secreted enzyme, and that the N-terminal residue, glutamine, had been modified into pyroglutamate, as is commonly observed with the mammalian salivary alpha-amylase. Thus, the human salivary alpha-amylase signal sequence for secretion was correctly recognized and processed by the yeast secretory pathway. The C-terminal residue was identified as leucine, which is predicted from the nucleotide sequence data to be located at position 511 in front of the termination codon. Therefore, there is no post-translational processing in formation of the C terminus.     

Continuous production of α-peptide using immobilized recombinant yeast cells: A model for continuous production of foreign peptide by recombinant yeast

α-Peptide, a portion of Escherichia coli β-galactosidase, was cloned downstream of the yeast α-factor promoter and the signal peptide by one of the authors. In this study, we utilized recombinant yeast cells, transformed the α-peptide secretion vector and attempted continuous production of α-peptide as a model of foreign peptide production. The continuous production of α-peptide was performed by using immobilized recombinant yeast cells on a column reactor, after characterizing the secretion, using minimal and complex medium. Utilizing minimal medium, with a productivity of 100 000 U h⁻¹ l⁻¹, α-peptide was continuously produced for more than 200 h. We then attempted to improve the productivity of α-peptide by alternating minimal and complex medium. Utilizing this medium changing method, 1.4 times higher α-peptide was produced during 150 h of operation compared with that achieved only by feeding minimal medium.     

Cloning and sequencing of the cellulose synthase catalytic subunit gene of Acetobacter xylinum

The gene for the catalytic subunit of cellulose synthase from Acetobacter xylinum has been cloned by using an oligonucleotide probe designed from the N-terminal amino acid sequence of the catalytic subunit (an 83 kDa polypeptide) of the cellulose synthase purified from trypsin-treated membranes of A. xylinum. The gene was located on a 9.5 kb HindIII fragment of A. xylinum DNA that was cloned in the plasmid pUC18. DNA sequencing of approximately 3 kb of the HindIII fragment led to the identification of an open reading frame of 2169 base pairs coding for a polypeptide of 80 kDa. Fifteen amino acids in the N-terminal region (positions 6 to 20) of the amino acid sequence, deduced from the DNA sequence, match with the N-terminal amino acid sequence obtained for the 83 kDa polypeptide, confirming that the DNA sequence cloned codes for the catalytic subunit of cellulose synthase which transfers glucose from UDP-glucose to the growing glucan chain. Trypsin treatment of membranes during purification of the 83 kDa polypeptide cleaved the first 5 amino acids at the N-terminal end of this polypeptide as observed from the deduced amino acid sequence, and also from sequencing of the 83 kDa polypeptide purified from membranes that were not treated with trypsin. Sequence analysis suggests that the cellulose synthase catalytic subunit is an integral membrane protein with 6 transmembrane segments. There is no signal sequence and it is postulated that the protein is anchored in the membrane at the N-terminal end by a single hydrophobic helix. Two potential N-glycosylation sites are predicted from the sequence analysis, and this is in agreement with the earlier observations that the 83 kDa polypeptide is a glycoprotein [13]. The cloned gene is conserved among a number of A. xylinum strains, as determined by Southern hybridization.