Tensile properties of the mandibular condylar cartilage

Mandibular condylar cartilage plays a crucial role in temporomandibular joint (TMJ) function, which includes facilitating articulation with the temporomandibular joint disc and reducing loads on the underlying bone. The cartilage experiences considerable tensile forces due to direct compression and shear. However, only scarce information is available about its tensile properties. The present study aims to quantify the biomechanical characteristics of the mandibular condylar cartilage to aid future three-dimensional finite element modeling and tissue engineering studies. Porcine condylar cartilage was tested under uniaxial tension in two directions, anteroposterior and mediolateral, with three regions per direction. Stress relaxation behavior was modeled using the Kelvin model and a second-order generalized Kelvin model, and collagen fiber orientation was determined by polarized light microscopy. The stress relaxation behavior of the tissue was biexponential in nature. The tissue exhibited greater stiffness in the anteroposterior direction than in the mediolateral direction as reflected by higher Young's (2.4 times), instantaneous (1.9 times), and relaxed (1.9 times) moduli. No significant differences were observed among the regional properties in either direction. The predominantly anteroposterior macroscopic fiber orientation in the fibrous zone of condylar cartilage correlated well with the biomechanical findings. The condylar cartilage appears to be less stiff and less anisotropic under tension than the anatomically and functionally related TMJ disc. The anisotropy of the condylar cartilage, as evidenced by tensile behavior and collagen fiber orientation, suggests that the shear environment of the TMJ exposes the condylar cartilage to predominantly but not exclusively anteroposterior loading.     

Biomechanical properties of the mandibular condylar cartilage and their relevance to the TMJ disc

Mandibular condylar cartilage plays a crucial role in temporomandibular joint (TMJ) function, which includes facilitating articulation with the TMJ disc, reducing loads on the underlying bone, and contributing to bone remodeling. To improve our understanding of the TMJ function in normal and pathological situations, accurate and validated three-dimensional (3-D) finite element models (FEMs) of the human TMJ may serve as valuable diagnostic tools as well as predictors of thresholds for tissue damage resulting from parafunctional activities and trauma. In this context, development of reliable biomechanical standards for condylar cartilage is crucial. Moreover, biomechanical characteristics of the native tissue are important design parameters for creating functional tissue-engineered replacements. Towards these goals, biomechanical characteristics of the condylar cartilage have been reviewed here, highlighting the structure–function correlations. Structurally, condylar cartilage, like the TMJ disc, exhibits zonal and topographical heterogeneity. Early structural investigations of the condylar cartilage have suggested that the tissue possesses a somewhat transversely isotropic orientation of collagen fibers in the fibrous zone. However, recent tensile and shear evaluations have reported a higher stiffness of the tissue in the anteroposterior direction than in the mediolateral direction, corresponding to an anisotropic fiber orientation comparable to the TMJ disc. In a few investigations, condylar cartilage under compression was found to be stiffer anteriorly than posteriorly. As with the TMJ disc, further compressive characterization is warranted. To draw inferences for human tissue using animal models, establishing stiffness–thickness correlations and regional evaluation of proteoglycan/glycosaminoglycan content may be essential. Efforts directed from the biomechanics community for the characterization of TMJ tissues will facilitate the development of reliable and accurate 3-D FEMs of the human TMJ.     

Regional and disease-related differences in properties of the equine temporomandibular joint disc

Temporomandibular joint (TMJ) disorders affect up to 12% of the human population, and naturally occurring TMJ diseases are increasingly recognized in animals. The TMJ disc plays a major role in TMJ disorders in people, but little is known about its role in TMJ pathology in animals. This study characterizes differences in properties of equine TMJ discs associated with age, disc region, and presence of TMJ osteoarthritis (OA). Discs were dissected from both TMJ’s of sixteen horses euthanized for reasons unrelated to this study. Each joint was grossly evaluated and scored as normal, mild OA, or severe OA. Samples from the rostral, caudal, lateral, central, and medial regions of the disc were subject to compressive testing, quantitative biochemistry, and histology. Samples from the lateral, central, and medial region were tested for tensile properties in the rostrocaudal and mediolateral directions. We found that the equine TMJ disc is highly anisotropic, and its glycosaminoglycan (GAG) content and compressive stiffness vary between disc regions. The disc also exhibits increasing GAG content and compressive stiffness with increasing age. While equine TMJ disc properties are generally similar to other herbivores, greater compressive stiffness throughout the disc and greater GAG content in its rostral region suggest that mechanical demands on the TMJ disc differ between horses and other species. Importantly, a region-specific decrease in compressive stiffness was observed associated with joint disease and corresponded to cartilage erosions in the underlying condylar surface.     

Quantitative analysis and comparative regional investigation of the extracellular matrix of the porcine temporomandibular joint disc.

Characterization of the extracellular matrix of the temporomandibular joint (TMJ) disc is crucial to advancing efforts in tissue engineering the disc. However, the current literature is incomplete and often contradictory in its attempts to describe the nature of the TMJ disc matrix. The aim of this study was to identify the variation of key matrix components along the three axes of the porcine disc using ELISAs to quantify these matrix components, immunohistochemistry to identify their regional distribution, and SEM to examine collagen fiber diameter and orientation. The overall GAG content of the TMJ disc (including the dermatan sulfate proteoglycans) was 5.3+/-1.2% of the dry weight. Chondroitin sulfate, which comprised 74% of this total GAG content, was 4.4, 8.2, and 164 times more abundant than dermatan sulfate proteoglycan, keratan sulfate, and hyaluronic acid, respectively. In general, these GAGs were most concentrated in the intermediate zone of the TMJ disc, appearing in dense clusters, and least concentrated in the posterior band. Additionally, chondroitin sulfate was more abundant medially than laterally. Collagen II was discovered in trace amounts, with higher relative amounts in the intermediate zone. Collagen fibers were observed to run primarily in a ring-like fashion around the periphery of the disc and anteroposteriorly through the intermediate zone, with a mean fiber diameter of 18+/-9 mum. Characterization studies of the TMJ disc, including prior biomechanical and cell studies along with the current study of the extracellular matrix, collectively reveal a distinct character of the intermediate zone of the disc compared to its anterior and posterior bands.     

Variability of gait is dependent on direction of progression: implications for active control

Typical healthy walking displays greater variability in the mediolateral direction compared to the anteroposterior direction. This greater variability is thought to represent increased uncertainty in movement. As a result, it has been postulated that the mediolateral direction of gait requires more active control by the central nervous system while the anteroposterior direction is controlled through passive actions. However, this theory has only been tested on gait where progression occurs in the anteroposterior direction. Therefore, the purpose of this study was to investigate how the amount of variability is affected if progression occurs in the mediolateral direction using a lateral stepping gait. Results showed the anteroposterior direction had a significantly greater amount of variability than the mediolateral direction (p<0.001). The results do not support current models of a partition of active control to different anatomical planes. Rather, it seems that other physical entities involved in motion, such as momentum and inertia, are able to decrease the dependence on active control from the central nervous system. In a lateral stepping gait, such physical entities were no longer assisting in the anteroposterior direction but had a larger impact in the mediolateral direction as it was the direction of progression. As a result variability in the anteroposterior direction increased. Thus, it is possible to infer increased reliance on active control from the central nervous system in the direction orthogonal to progression.     

The regional contribution of glycosaminoglycans to temporomandibular joint disc compressive properties

Understanding structure-function relationships in the temporomandibular joint (TMJ) disc is a critical first step toward creating functional tissue replacements for the large population of patients suffering from TMJ disc disorders. While many of these relationships have been identified for the collagenous fraction of the disc, this same understanding is lacking for the next most abundant extracellular matrix component, sulfated glycosaminoglycans (GAGs). Though GAGs are known to play a major role in maintaining compressive integrity in GAG-rich tissues such as articular cartilage, their role in fibrocartilaginous tissues in which GAGs are much less abundant is not clearly defined. Therefore, this study investigates the contribution of GAGs to the regional viscoelastic compressive properties of the temporomandibular joint (TMJ) disc. Chondroitinase ABC (C-ABC) was used to deplete GAGs in five different disc regions, and the time course for >95% GAG removal was defined. The compressive properties of GAG depleted regional specimens were then compared to non-treated controls using an unconfined compression stress-relaxation test. Additionally, treated and non-treated specimens were assayed biochemically and histologically to confirm GAG removal. Compared to untreated controls, the only regions affected by GAG removal in terms of biomechanical properties were in the intermediate zone, the most GAG-rich portion of the disc. Without GAGs, all intermediate zone regions showed decreased tissue viscosity, and the intermediate zone lateral region also showed a 12.5% decrease in modulus of relaxation. However, in the anterior and posterior band regions, no change in compressive properties was observed following GAG depletion, though these regions showed the highest compressive properties overall. Although GAGs are not the major extracellular matrix molecule of the TMJ disc, they are responsible for some of the viscoelastic compressive properties of the tissue. Furthermore, the mechanical role of sulfated GAGs in the disc varies regionally in the tissue, and GAG abundance does not always correlate with higher compressive properties. Overall, this study found that sulfated GAGs are important to TMJ disc mechanics in the intermediate zone, an important finding for establishing design characteristics for future tissue engineering efforts.     

Viscoelastic characterization of the porcine temporomandibular joint disc under unconfined compression

Pathophysiology of the temporomandibular joint (TMJ) disc is central to many orofacial disorders; however, mechanical characterization of this tissue is incomplete. In this study, we identified surface-regional mechanical variations in the porcine TMJ disc under unconfined compression. The intermediate zone, posterior, anterior, lateral, and medial regions of eight TMJ discs were sectioned into inferior and superior surface samples. Surface-regional sections were then subjected to incremental stress relaxation tests. Single strain step (SSS) and final deformation (FD) viscoelastic models were fit to experimental data. Both models represented the experimental data with a high degree of accuracy (R(2)=0.93). The instantaneous modulus and relaxation modulus for the TMJ disc sections were approximately 500 kPa and 80 kPa, respectively; the coefficient of viscosity was approximately 3.5 MPa-s. Strain dependent material properties were observed across the disc's surface-regions. Regional variations in stiffness were observed in both models. The relaxation modulus was largest in the inferior-medial parts of the disc. The instantaneous modulus was largest in the posterior and anterior regions of the disc. Surface-to-surface variations were observed in the relaxation modulus for only the FD model; the inferior surface was found to be more resistant to compression than the superior surface. The results of this study imply the stiffness of the TMJ disc may change as strain is applied. Furthermore, the lateral region exhibited a lower viscosity and stiffness compared to other disc regions. Both findings may have important implications on the TMJ disc's role in jaw motion and function.     

Histochemistry for studying structure and function of the articular disc of the human temporomandibular joint

The articular disc of the temporomandibular joint (TMJ) is composed of fibrocartilage, and the extracellular matrix of this disc is composed mainly of collagen, glycosaminoglycan and proteoglycans. Research on the changes that occur in the composition of the articular disc of the TMJ is necessary for understanding the basis of the pathological process of internal derangement (ID), and a number of reports have been published in recent years on the application of refined histochemical techniques to investigate the structure and function of the TMJ. The direction of future TMJ disc studies should be towards obtaining more evidence to support previous results, and should hopefully be of practical use in terms of prevention and cure of ID.     

Effects of intraoral splint wear on proteoglycans in the temporomandibular joint disc

Intraoral splints are a common dental treatment for dysfunctions of the temporomandibular joint (TMJ), but their effects on the structures of the joint, specifically the disc, have not been well investigated. This study examined proteoglycans (PGs) of the TMJ disc of the miniature pig and tested for alterations resulting from intraoral splint wear. Sixteen female pigs were divided into three groups: control (C), control splint (CS), and protrusive splint (PS). Splinted groups received chrome-cobalt ramp splints which were worn continuously for 2 months. PG content within various disc locations was determined by colorimeteric assay. PG synthesis and type were examined by labeling with (35)S-sulfate and SDS-PAGE analysis. Average water content of the disc was 77.1%, which places it at the high end of the normal range for collagenous biomaterials (60-80%). PGs migrating to the positions typical of aggrecan, biglycan, and decorin on SDS-PAGE were present in all locations of all groups. The highest content and synthesis of PGs were always found in the intermediate band of the disc regardless of group (P < 0.05), supporting the notion that this band encounters heavy compressive loading during function. The joints of animals from both splinted groups showed a high frequency of gross pathology. Biglycan synthesis was increased in both splinted groups (P < 0.05). Newly synthesized biglycan had a shorter migration distance in the intermediate bands of the CS group, suggesting increased hydrodynamic size. These findings suggest that intraoral splint wear may cause disc damage or remodeling.     

Correlation between MRI evidence of degenerative condylar surface changes, induction of articular disc displacement and pathological joint sounds in the temporomandibular joint

Objectives: The relationship of bony changes in the condylar surfaces in articular disc displacement without reduction in temporomandibular joint (TMJ) was investigated using diagnostic imaging. The study also evaluated whether the bony changes in the condylar surfaces limit disc and condyle motion, and produce pathological joint sounds. Materials and methods: Thirty‐seven joints in 28 patients diagnosed with degenerative bony changes in the condylar surfaces radiographically and anterior disc displacement without reduction using magnetic resonance imaging (MRI) were studied. The bony changes were assessed by radiographic examination and classified into two types: pathological bone changes (PBCs) including erosion, osteophyte formation and deformity, and adaptive bone changes (ABCs) including flattening and concavity. MRI was performed on the TMJ to examine the configuration and position of the discs. Joint sounds in the TMJ were determined using electrovibratograghy with a joint vibration analysis. Results: The articular disc motion to the condyle in the PBC group was smaller than in the ABC group irrespective of the configuration of the disc, even though there were no significant differences between the two types of bony changes in the disc position during jaw closing. The joint vibration analysis of the TMJ showed that joint sounds with a higher frequency were observed in the PBC group than in the ABC group. High energy levels needed to produce the higher frequencies (over 300 Hz) were observed only in the PBC group.     

The region-dependent biphasic viscoelastic properties of human temporomandibular joint discs under confined compression

The objective of this study was to determine the biphasic viscoelastic properties of human temporomandibular joint (TMJ) discs, correlate these properties with disc biochemical composition, and examine the relationship between these properties and disc dynamic behavior in confined compression. The equilibrium aggregate modulus (H_A), hydraulic permeability (k), and dynamic modulus were examined between five disc regions. Biochemical assays were conducted to quantify the amount of water, collagen, and glycosaminoglycan (GAG) content in each region. The creep tests showed that the average equilibrium moduli of the intermediate, lateral, and medial regions were significantly higher than for the anterior and posterior regions (69.75±11.47 kPa compared to 22.0±5.15 kPa). Permeability showed the inverse trend with the largest values in the anterior and posterior regions (8.51±1.36×10^?15 m⁴/Ns compared with 3.75±0.72×10^?15 m⁴/Ns). Discs were 74.5% water by wet weight, 62% collagen, and 3.2% GAG by dry weight. Regional variations were only observed for water content which likely results in the regional variation in biphasic mechanical properties. The dynamic modulus of samples during confined compression is related to the aggregate modulus and hydraulic permeability of the tissue. The anterior and posterior regions displayed lower complex moduli over all frequencies (0.01–3 Hz) with average moduli of 171.8–609.3 kPa compared with 454.6–1613.0 kPa for the 3 central regions. The region of the TMJ disc with higher aggregate modulus and lower permeability had higher dynamic modulus. Our results suggested that fluid pressurization plays a significant role in the load support of the TMJ disc under dynamic loading conditions.     

Biomechanical properties of murine TMJ articular disc and condyle cartilage via AFM-nanoindentation

This study aims to quantify the biomechanical properties of murine temporomandibular joint (TMJ) articular disc and condyle cartilage using AFM-nanoindentation. For skeletally mature, 3-month old mice, the surface of condyle cartilage was found to be significantly stiffer (306 ± 84 kPa, mean ± 95% CI) than those of the superior (85 ± 23 kPa) and inferior (45 ± 12 kPa) sides of the articular disc. On the disc surface, significant heterogeneity was also detected across multiple anatomical sites, with the posterior end being the stiffest and central region being the softest. Using SEM, this study also found that the surfaces of disc are composed of anteroposteriorly oriented collagen fibers, which are sporadically covered by thinner random fibrils. Such fibrous nature results in both an F-D^3/2 indentation response, which is a typical Hertzian response for soft continuum tissue under a spherical tip, and a linear F-D response, which is typical for fibrous tissues, further signifying the high degree of tissue heterogeneity. In comparison, the surface of condyle cartilage is dominated by thinner, randomly oriented collagen fibrils, leading to Hertzian-dominated indentation responses. As the first biomechanical study of murine TMJ, this work will provide a basis for future investigations of TMJ tissue development and osteoarthritis in various murine TMJ models.     

Muscle contributions to mediolateral and anteroposterior foot placement during walking

Foot placement is critical to balance control during walking and is primarily controlled by muscle force generation. Although gluteus medius activity has been associated with mediolateral foot placement, how other muscles contribute to foot placement is not clear. Furthermore, although dynamic walking models have suggested that anteroposterior foot placement can be passively controlled, the extent to which muscles actively contribute to anteroposterior foot placement has not been determined. The objective of this study was to identify individual muscle contributions to mediolateral and anteroposterior foot placement during walking in healthy adults. Dynamic simulations of walking were developed for six older adults and a segmental power analysis was performed to determine the individual muscle contributions to the mediolateral and anteroposterior power delivered to the foot segment. The simulations revealed the ipsilateral swing limb gluteus medius, iliopsoas, rectus femoris and hamstrings and the contralateral stance limb gluteus medius and ankle plantarflexors were primary contributors to both mediolateral and anteroposterior foot placement. Muscle contributions to foot placement were found to be highly influenced by their contributions to pelvis power, which was dominated by those muscles crossing the hip joint. Thus, impaired balance control may be improved by focusing rehabilitation interventions on optimizing the coordination of those muscles crossing the hip joint and the ankle plantarflexors.     

Viscoelastic properties of the central region of porcine temporomandibular joint disc in shear stress-relaxation

In this study, shear relaxation properties of the porcine temporomandibular joint (TMJ) disc are investigated. Previous studies have shown that, in fatigue failure and damage of cartilage and fibrocartilage, shear loads could be one of the biggest contributors to the failure. The aim of the present study is to develop an evaluation method to study shear properties of the disc and to do a mathematical characterization of it. For the experiments, twelve porcine discs were used. Each disc was dissected from the TMJ and, then, static strain control tests were carried out to obtain the shear relaxation modulus for the central region of the discs. From the results, it was found that the disc presents a viscoelastic behavior under shear loads. Relaxation modulus decreased with time. Shear relaxation was 10% of the instantaneous stress, which implies that the viscous properties of the disc cannot be neglected. The present results lead to a better understanding of the discs mechanical behavior under realistic TMJ working conditions.     

The temporomandibular joint disc of Asian elephant (Elephas maximus) and African elephant (Loxodonta africana)

The temporomandibular joint (TMJ) is a synovial articulation between the mandibular head of the condylar process of the mandible and the mandibular fossa of the squamous temporal bone. Extensions of the fibrous capsule into the joint space form a biconcave disc that functions as an articulating surface and divides the joint into dorsal and ventral compartments. The TMJ disc plays a crucial role in normal functioning of the joint, and differences in cranial morphology, mastication patterns, and diet are reflected in the material and biochemical properties of the disc. The purpose of the present case study was to compare the regional histologic differences between two elephant genera and quantify the biochemical and biomechanical properties of the African elephant disc. This study provides a unique insight into the elephant TMJ disc and also provides a comparison between the African and the Asian elephant genera. The results demonstrate several remarkable findings. First, structure–function relationships exist within the elephant TMJ disc. Second, regional variations exist in the elephant TMJ disc, and these are likely to correlate with its functional requirement. Additionally, it is apparent that some properties of the disc vary with the specific anatomy, diet requirement, and jaw motion. Finally, in comparison with the TMJ disc of other species, it is clear that, although the elephant disc is unique, it has properties that transcend and are preserved among the species.     

Postural performance at different breathing strategies with and without restriction of body mobility

The present work investigated the effect of different breathing strategies performed with and without body immobilization on postural performance. Sway amplitude and mean velocity of center of pressure displacement in the anteroposterior and mediolateral planes were assessed by the force platform in 48 healthy volunteers. Balance was estimated during quiet breath, inspiratory, expiratory breath holding and hyperventilation with and without immobilization of the neck, trunk, hip, and knee joints. In general, restriction of body mobility caused a reduction of the postural stability in anteroposterior plane, while mediolateral body sway decreased. Our results imply that body immobilization reduced the ability to compensate respiratory disturbances in the anteroposterior direction and, on the contrary, facilitated mamtaining balance in the mediolateral plane.     

Stress relaxation behaviors of articular cartilages in porcine temporomandibular joint

In this study, we tested the compressive stress relaxation behaviors of the mandibular condylar and temporal cartilages in the porcine temporomandibular joint (TMJ). The aim was to determine the quantitative and qualitative similarities and differences of compressive stress relaxation behaviors between the two cartilages. Ten porcine TMJs were used; the articular surface was divided into 5 regions: anterior, central, posterior, lateral and medial. Compressive relaxation test was carried out at a strain level of 5% in each region of the two cartilages. The stress relaxation was monitored over a period of 5 min. In all the regions of the two cartilages, the time-dependent stress relaxation curves showed a marked drop in stress within the initial 10 s, which can be fitted by a standard linear viscoelastic model. The instantaneous moduli in the temporal cartilage were dominantly larger than those in the condylar cartilage, while the condylar cartilage had slightly larger relaxation moduli than the temporal cartilage except for the medial region. The both cartilages showed the regional differences in the compressive stress relaxation behavior, and in the temporal cartilage the lateral and medial regions revealed the largest values for the instantaneous and relaxation moduli. The present results demonstrate that the viscoelastic properties of compressive stress relaxation in both cartilages are region-specific, which might have an important implication for stress distribution and transmission along with the TMJ disc.     

Expression of lumican related to CD34 and VEGF in the articular disc of the human temporomandibular joint

Lumican belongs to the small leucine-rich repeat proteoglycan (SLRP) gene family and has been reported to exist in the cornea, intervertebral disc and tendon. Lumican plays a significant role in the assembly and regulation of collagen fibres. The human temporomandibular joint (TMJ) disc is made up of fibrocartilage with an extracellular matrix (ECM) composed of collagen and proteoglycans. The existence and behaviour of lumican have not been studied in the human TMJ disc. Therefore, we used immunohistochemical methods to detect lumican, CD34 and vascular endothelial growth factor (VEGF) and histochemical staining with toluidine blue in 13 human TMJ specimens (10 surgically removed and 3 obtained from autopsy). In both normal and deformed discs we observed staining with toluidine blue. We found that the area of metachromasia inside the deformed disc was uneven and expression of lumican was strong in the areas negative for metachromasia. Staining of VEGF and CD34 inside the deformed disc was seen. We confirmed the expression of lumican in the human TMJ disc and showed that a large number of fibroblast-like cells existed in the area of strong lumican expression. These new findings about the behaviour of lumican suggest that it may play a key role in the generation of a new collagen network by fibroblast-like cells.Key words: TMJ disc, lumican, CD34, VEGF, immunohistochemistry, metachromasia.     

A model of temporomandibular joint function in anthropoid primates based on condylar movements during mastication

The hypothesis that the shape of the bony temporomandibular joint (TMJ) is functionally related to sagittal sliding of the condyle during mastication is tested, and a model of the relation of sagittal sliding to mandibular size, TMJ shape, and diet is developed. Sagittal sliding is defined as fore-aft motion of the condyle during mandibular translation and/or angular rotation. Ascending ramus height is used as a structural correlate of the distance between the condyle and the mandibular axis of rotation (CR). Cineradiographic data on sagittal sliding and gape during mastication in Ateles spp., Macaca fascicularis, Papio anubis, and Pan troglodytes in conjunction with comparative data on mandibular size and TMJ shape are used to evaluate the hypothesis. The results show that 1) linear and angular gape are highly positively correlated with sagittal sliding, 2) pure mandibular translation is rare during mastication, 3) the CR is rarely if ever located at the condyle during mastication, 4) angular gape should be standardized in interindividual comparisons of sagittal sliding, and 5) the height of the ascending ramus (and by inference the CR-to-condyle distance) is highly positively correlated with absolute sagittal sliding. Sagittal sliding relative to the length of the articular eminence was the variable used to explore the relation between TMJ shape and sliding. This variable standardized absolute sagittal sliding relative to joint size. The relative depth and orientation of the articular eminence were not correlated with relative sagittal sliding. The anteroposterior curvature of the condyle was highly negatively correlated with relative sagittal sliding. Flat condyles are associated with large amounts of relative sagittal sliding. A flat condyle increases joint contact area, which reduces joint stress. A flat condyle also increases joint congruence, and this may facilitate the combined sliding and rolling motion of the condyle when the sliding motion is relatively large. The shape of the entoglenoid process was also positively correlated with relative sagittal sliding. A relatively large entoglenoid process may help to guide sagittal sliding and prevent excessive mediolateral sliding of the condyle. The functional model makes a number of predictions about the correlations between food consistency and food object size, mandibular size, TMJ shape, and sagittal sliding of the condyle during mastication and incision. Am J Phys Anthropol 109:67–88, 1999. © 1999 Wiley-Liss, Inc.     

Relationships between geometry and kinematic characteristics in the temporomandibular joint

Motions of the temporomandibular joint (TMJ) involve both translation and rotation; however, there may be substantial variations from one human to another, and these variations present significant difficulties when designing TMJ prostheses. The disc–condyle glides along the temporal bone and the condyle centre describe a curve that depends on the individual morphology.

This study analyses disc–condyle rotatory and translatory displacements moving all along the temporal bone facets which are mainly composed of two areas: the articular tubercle slope (ATS) and the preglenoid plane separated by the articular tubercle crest. Displacements were quantified using 3D video analysis, and this technique was computer-assisted.

From a population of 32 volunteers, we were able to establish a correlation between the kinematic characteristics of the joint and the disc–condyle trajectories. This study quantifies the geometrical characteristics of the ATS and their inter-individual variations, which are useful in TMJ prosthesis design.