Divalent hammerhead ribozyme targeting template region of human telomerase RNA has potent cleavage activity,but less inhibitory activity on telomerase

The template region of human telomerase RNA is a crucial area for regulating telomerase activity and would be a good target for ribozymes. In fact, potent telomerase inhibitory activity of the ribozyme targeting the GUC sequence of the 5(') end of this region (36-ribosome) has been well demonstrated. To search for a more potent ribozyme, we designed a divalent ribozyme to cleave both the phosphodiester bonds following the GUC and the 23 nucleotides downstream of GUA. An in vitro cleavage study showed that this divalent ribozyme cleaved telomerase RNA more efficiently than the 36-ribozyme or the 59-ribozyme to target the GUA. When this ribozyme was introduced into the carcinoma cells, its inhibitory effect on telomerase activity was less than that of the 36-ribozyme. The 59-ribozyme showed minimum activity on telomerase. This implies that, although the divalent ribozyme possesses a potent cleavage activity on hTR in vitro, the 36-ribozyme is most potent to suppress telomerase activity.     

抗HPV11E2核酸的计算机设计

借助计算机软件分析,设计出能特异性切割HPV11型644nt型644ntE2mNA的核酶。遵循Symons锤头状核酶结构和GUX剪切位点原则,靶序列存在32个剪切位点,通过计算机软件分析核酶的最佳剪切位点,并对底物及核酶的二级结构进行预测及进行相应基因生物学功能和基因同源性分析,筛选出2个锤头结构核酶。针对这两位点设计的核酶分别命名为RZ277和RZ3281。计算机分析显示,两核酶与底物切点两翼碱基形成锤头状结构,切点所在基因序列具有相对松驰的二级结构,位于该基因重要生物功能区内,是核酶的理想攻击区域,通过基因库检索,在已知人类基因中排除了与上述两核酶切点两翼碱基有基因同源性序列的可能性。并非所有的GUX位点（X：C、U、A）或CUX均可作为核酶的最佳剪切切割反应,为下一步将核酶用于细胞内和体内试验打下基础。     

抗HPV11 E2核酶的计算机设计

 借助计算机软件分析 ,设计出能特异性切割HPV11型 6 4 4ntE2mRNA的核酶 (ribozyme) .遵循Symon′s锤头状核酶结构和GUX剪切位点原则 ,靶序列存在 32个这样的剪切位点 .通过计算机软件分析出核酶的最佳剪切位点 ,并对底物及核酶的二级结构进行预测及进行相应基因生物学功能和基因同源性分析 ,筛选出 2个锤头结构核酶 .针对这两位点设计的核酶分别命名为RZ2 777和RZ32 81.计算机分析显示 ,两核酶与底物切点两翼碱基形成锤头状结构 ,切点所在基因序列具有相对松弛的二级结构 ,位于该基因重要生物功能区内 ,是核酶的理想攻击区域 .通过基因库检索 ,在已知人类基因排除了与上述两核酶切点两翼碱基有基因同源性序列的可能性 .将两核酶用于体外剪切实验取得了良好的实验结果 ,认为借助计算机分析可帮助尽快从多个剪切位点选择出最适核酶     

Design and specificity of hammerhead ribozymes against calretinin mRNA.

We obtained a partial sequence of mouse calretinin mRNA from cDNA clones, and designed hammerhead ribozymes to cleave positions within it. With a view to optimising hammerhead ribozymes for eliminating the mRNA in vivo, we varied the length and sequence of the three duplex 'arms' and measured the cleavage of long RNA substrates in vitro at 37 degrees C (as well as 50 degrees C). Precise cleavage occurred, but it could only go to completion with a large excess of ribozyme. The evidence suggests that the rate-limiting step with a large target is not the cleavage, but the formation of the active ribozyme: substrate complex. The efficiency varied unpredictably according to the target site, the length of the substrate RNA, and the length of the ribozyme; secondary structure in vitro may be responsible. We particularly investigated the degree of sequence-specificity. Some mismatches could be tolerated, but shortening of the total basepairing with the substrate to less than 14 bp drastically reduced activity, implying that interaction with weakly-matched RNAs is unlikely to be a serious problem in vivo. These results suggest that specific and complete cleavage of a mRNA in vivo should be possible, given high-level expression of a ribozyme against a favourable target site.     

Expression of a chimeric ribozyme gene results in endonucleolytic cleavage of target mRNA and a concomitant reduction of gene expression in vivo.

The subclass of catalytic RNAs termed ribozymes cleave specific target RNA sequences in vitro. Only circumstantial evidence supports the idea that ribozymes may also act in vivo. In this study, ribozymes with a hammerhead motif directed against a target sequence within the mRNA of the neomycin phosphotransferase gene (npt) were embedded into a functional chimeric gene. Two genes, one containing the ribozyme and the other producing the target, were cotransfected into plant protoplasts. Following in vivo expression, a predefined cleavage product of the target mRNA was detected by ribonuclease protection. Expression of both the ribozyme gene and the target gene was driven by the CaMV 35S promoter. Concomitant with the endonucleolytic cleavage of the target mRNA, a complete reduction of NPT activity was observed. An A to G substitution within the ribozyme domain completely inactivates ribozyme-mediated hydrolysis but still shows a reduction in NPT activity, albeit less pronounced. Therefore, the reduction of NPT activity produced by the active ribozyme is best explained by both hydrolytic cleavage and an antisense effect. However, the mutant ribozyme--target complex was more stable than the wildtype ribozyme--target complex. This may result in an overestimation of the antisense effect contributing to the overall reduction of gene expression.     

Facilitation of hammerhead ribozyme catalysis by the nucleocapsid protein of HIV-1 and the heterogeneous nuclear ribonucleoprotein A1.

In order to improve the activity of hammerhead ribozymes in vivo, we have analyzed the effect of several prototypical RNA binding proteins on the ribozyme cleavage reaction: bacteriophage T4 gene 32 protein (gp32), hnRNP A1 (A1) and the nucleocapsid protein of HIV-1 (NCp7). We show that, while gp32 has no effect on the cleavage reaction, A1 and NCp7 affect different steps of the reaction. Moreover, some of these effects depend upon the ribozyme-substrate hybrid length. A1 and NCp7 inhibit the reaction of the least stable ribozyme-substrate complexes, which have 12 bp of duplex. NCp7, but not A1, inhibits the cleavage of substrates that have long ribozyme-substrate duplexes (17 or 20 bp), while cleavage of complexes having shorter duplexes (13 or 14 bp) is not affected. NCp7 and A1 enhance the turnover of ribozymes by increasing the rate of product dissociation, but only when both cleavage products are bound with < or = 7 bp. A1 and NCp7 enhance ribozyme binding to long substrates, such as mRNAs, the structure of which otherwise limits ribozyme binding. Therefore, the effects of A1 or NCp7 on the different steps of the cleavage reaction define a length of the ribozyme-substrate duplex which allows enhancement of the rate of binding and product release without inhibiting the cleavage step. Interestingly, this duplex length (14 bases, or 7 on each side of the cleavage site) is identical for A1 and NCp7. Since A1 is thought to interact with most, if not all mRNAs in vivo, it may enhance the intracellular activity of ribozymes targeted against any mRNA.(ABSTRACT TRUNCATED AT 250 WORDS)     

The effect of structure in a long target RNA on ribozyme cleavage efficiency.

Inhibition of gene expression by catalytic RNA (ribozymes) requires that ribozymes efficiently cleave specific sites within large target RNAs. However, the cleavage of long target RNAs by ribozymes is much less efficient than cleavage of short oligonucleotide substrates because of higher order structure in the long target RNA. To further study the effects of long target RNA structure on ribozyme cleavage efficiency, we determined the accessibility of seven hammerhead ribozyme cleavage sites in a target RNA that contained human immunodeficiency virus type 1 (HIV-1) vif - vpr . The base pairing-availability of individual nucleotides at each cleavage site was then assessed by chemical modification mapping. The ability of hammerhead ribozymes to cleave the long target RNA was most strongly correlated with the availability of nucleotides near the cleavage site for base pairing with the ribozyme. Moreover, the accessibility of the seven hammerhead ribozyme cleavage sites in the long target RNA varied by up to 400-fold but was directly determined by the availability of cleavage sites for base pairing with the ribozyme. It is therefore unlikely that steric interference affected hammerhead ribozyme cleavage. Chemical modification mapping of cleavage site structure may therefore provide a means to identify efficient hammerhead ribozyme cleavage sites in long target RNAs.     

Selective cleavage of bcr-abl chimeric RNAs by a ribozyme targeted to non-contiguous sequences.

Conventionally designed ribozymes may be unable to cleave RNA at sites which are inaccessible due to secondary structure. In addition, it may also be difficult to specifically target a conventionally designed ribozyme to some chimeric RNA molecules. Novel approaches for ribozyme targeting were developed by using the L6 bcr-abl fusion RNA as a model. Using one approach, we successfully directed ribozyme nucleation to a site on the bcr-abl RNA that is distant from the GUA cleavage site. These ribozymes bound to the L6 substrate RNA via an anchor sequence that was complementary to bcr sequences. The anchor was necessary for efficient cleavage as the anchor minus ribozyme, a conventionally designed ribozyme, was inefficient at catalyzing cleavage at this same site. The effect of anchor sequences on catalytic rates was determined for two of these ribozymes. Ribozymes generated by a second approach were designed to cleave at a CUU site in proximity to the bcr-abl junction. Both approaches have led to the development of a series of ribozymes specific for both the L6 and K28 bcr-abl chimeric RNAs, but not normal abl or bcr RNAs. The specificity of the ribozyme correlated in part with the ability of the ribozyme to bind substrate as demonstrated by gel shift analyses. Secondary structure predictions for the RNA substrate support the experimental results and may prove useful as a theoretical basis for the design of ribozymes.     

Activity identification of chimeric anti-caspase-3 mRNA hammerhead ribozyme in vitro and in vivo

To study the expression activity of various vectors containing anti-caspase-3 ribozyme cassettes in vivo, and to further study the role of caspas-3 in the apoptotic pathway, we constructed anti-caspase-3 hammerhead ribozyme embedded into the human snRNA U6, and detected the activity of the ribozyme in vitro and in vivo. Meanwhile we compared it with the self-cleaving hammerhead ribozymes that we previously studied, and with the general ribozyme, cloned into RNA polymerase II expression systems. The results showed that the three ribozymes, p1.5RZ107, pRZ107 and pU6RZ107 had the correct structure, and that they could cleave cas-pase-3 mRNA exactly to produce two fragments: 143nt/553nt. p1.5RZ107 has the highest cleavage efficiency in vitro, almost 80%. However, the U6 chimeric ribozyme, pU6RZ107, has the highest cleavage activity in vivo, almost to 65%, though it has lower cleavage activity in vitro. The cleavage results demonstrated that the pU6RZ107, the U6 chimeric ribozyme, could more efficiently expre     

In vitro evolution of the hammerhead ribozyme to a purine-specific ribozyme using mutagenic PCR with two nucleotide analogues

The conventional hammerhead ribozyme cleaves RNA 3' to nucleotide triplets with the general formula NUH, where N is any nucleotide, U is uridine and H is any nucleotide except guanosine. In order to isolate hammerhead ribozyme sequences capable of cleaving 3' to the GUG triplet, we performed a mutagenic selection protocol starting with the conventional sequence of an NUH-cleaving ribozyme. The 22 nucleotides in the core and the stem-loop II region were subjected to mutagenic PCR using the two nucleotide analogues 6-(2-deoxy-beta-d-ribofuranosyl)-3,4-dihydro-8H-pyrimido-[4,5-C)][1, 2] oxazin-7-one and of 8-oxo-2'-deoxyguanosine. After five repetitions of the selection cycle, several clones showed cleavage activity. One sequence, having one deletion, showed at least a 90 times higher in trans cleavage rate than the starting ribozyme. It cleaved 3' to GUG and GUA. The sequence of this ribozyme is essentially identical with that obtained previously by selection for AUG cleavage starting with a randomised core and stem-loop II region. This identical result of two independent selection procedures supports the notion that sequences for NUR cleavage, where R is a purine nucleotide, are not compatible with the classical hammerhead structure, and that the sequence space for this cleavage specificity is very limited. The cleavage of NUR triplets is not restricted to the sequence of the substrate that was used for selection but is sequence-independent for in trans cleavage, although the sequence context influences the value for the cleavage rate somewhat. Analysis of cleavage activities indicates the importance of A at position L2.5 in loop II.     

锤头状核酶对转化生长因子β1 RNA的体外剪切作用

为研究转化生长因子β1（TGFβ1）在造血调控中的关键作用, 构建针对抗转化生长因子β1的锤头状核酶, 并对它的体外剪切活性进行探讨. TGFβ1 cDNA部分基因片段其克隆入T载体中, ３２Ｐ标记TGFβ1体外转录物, 变性的聚丙烯酰胺凝胶电泳纯化获得靶RNA.计算机设计抗TGFβ1的锤头状核酶, 并把合成的核酶基因片段克隆入pGEM-9Zf(-)中T7启动子的下游, 凝胶电泳纯化回收３２Ｐ标记核酶的体外转录物.在不同条件下进行核酶的剪切反应, 变性PAGE, 放射自显影.活性的Rz445在37℃时具有良好活性, Km为29.55 nmol/L, Kcat为0.1533 min－1, 突变型核酶Rz445m没有剪切活性.制备的Rz445在体外具有良好的特异催化剪切活性, 并有望胞内抑制TGFβ1表达, 从而在干细胞移植中应用.     

针对点突变癌基因转录物的核酶细胞内性质的研究

前文［１］已证实在体外（ｉｎｖｉｔｒｏ）实验接近生理环境的条件下,本室设计、合成并克隆到的核酶能够高效选择性的定点切割Ｔ２４－ｒａｓ活化癌基因转录物。在此基础上,为阐明该核酶在体内（ｉｎｖｉｖｏ）的生理活性,本文又进一步把核酶基因片段克隆在真核表达质粒ｐＳＭＧ上,并将重组质粒以磷酸钙沉淀法转染由Ｔ２４－ｒａｓ基因诱导的转化细胞系。在细胞和分子水平上检测了核酶在真核细胞内的生物学活性：表现为各恶性转化细胞系的形态特征逆转,生长速度减慢,并呈现出重叠生长减弱恢复接触抑制的趋势,细胞凝集行为接近正常、软琼脂集落形成能力下降;同时,引物延伸实验结果也表明：在体内实验条件下,核酶能够特异性切割点突变Ｔ２４－ｒａｓ癌基因转录物,抑制癌变细胞的恶性行为,使其得到一定程度的逆转。