Antibacterial activity of quaternary ammonium chitosan containing mono or disaccharide moieties: Preparation and characterization

The 9 quaternary ammonium chitosans containing monosaccharides or disaccharides moieties were successfully synthesized by reductive N-alkylation then quaternized by N-(3-chloro-2-hydroxypropyl) trimethylammonium chloride (Quat-188). The chemical structures of quaternary ammonium chitosan derivatives were characterized by ATR-FTIR and ¹H NMR spectroscopy. The degree of N-substitution (DS) and the degree of quaternization (DQ) were determined by ¹H NMR spectroscopic method. It was found that the DS was in the range of 12–40% while the DQ was in the range of 90–97%. The results indicated that the O-alkylation was occured in this condition. Moreover, all quaternary ammonium chitosan derivatives were highly water-soluble at acidic, basic, and neutral pH. Minimum inhibitory concentration (MIC) antibacterial studies of these materials were carried out on Escherichia coli (Gram-negative) and Staphylococcus aureus (Gram-positive) bacteria compared to quaternary ammonium N-octyl and N-benzyl chitosan derivatives. The quaternary ammonium mono and disaccharide chitosan derivatives showed very high MIC values which were in the range of 32 to >256 μg/mL against both bacteria. Also it was found that the antibacterial activity decreased with increasing the DS. This was due to the increased hydrophilicity of mono and disaccharide moieties. On the other hand, the low MIC values (8–32 μg/mL) were obviously observed when the DS of quaternary ammonium N-octyl and N-benzyl chitosan derivatives was lower than 18%. The results showed that the presence of hydrophobic moiety such as the N-benzyl group enhanced the antibacterial activity compared to the hydrophilic moiety against both bacteria.     

Biosorption of nonylphenol on dead biomass of Rhizopus arrhizus encapsulated in chitosan beads

The nonylphenol (NP) biosorption and desorption potential for fungal biomass used under batch conditions was investigated using kinetics and isotherm models. Fungal biomass of Rhizopus arrhizus TISTR 3610 exhibited preferential uptake of NP, an endocrine disrupting chemicals. Sporangiospores, asexual spores, were immobilised in chitosan beads. The biosorption data of NP on the moist heat inactivated R. arrhizus–chitosan beads were analyzed using four popular adsorption isotherms and, by using non-linear least-regression with the solver add-in in Microsoft Excel, correlated in order with the Fritz–Schluender > Redlich–Peterson > Freundlich > Langmuir isotherms. The pseudo first-order kinetics was found to have the best fit with the experimental data. The diffusivity of NP in the R. arrhizus–chitosan beads was calculated using the shrinking core model, and the diffusivity values were in the ranges of 2.3736 × 10⁻⁴–1.8950 × 10⁻⁴ cm² s⁻¹. Desorption to recover the adsorbed NP from the beads was performed in methanol and was best described using a pseudo second-order kinetic model.     

In vitro evaluation of combination of Trichoderma harzianum and chitosan for the control of sapstain fungi

In vitro assays were undertaken to evaluate the control of two sapstain fungi, Leptographium procerum and Sphaeropsis sapinea by a combination of chitosan or chitosan oligomer and an albino strain of Trichoderma harzianum. Spore germination and hyphal growth of the test fungi were assessed on media amended with chitosan or chitosan oligomer with and without T. harzianum using either simultaneous inoculation with test fungus or inoculation 1, 2, or 3 days after pre-infection with test fungus.There was no mycelial growth of the test fungi regardless of chitosan concentrations used when either L. procerum or S. sapinea was simultaneously inoculated with T. harzianum. However, the dose–response of chitosan or chitosan oligomer on the test fungi was apparent when T. harzianum was not simultaneously inoculated with test fungus but introduced later. There was a greater growth reduction at higher concentrations (0.075–0.1% v/v) of chitosan, and overall chitosan oligomer was more effective than chitosan aqueous solution.Chitosan alone was able to restrict or delay the germination of spores but the combination of chitosan and T. harzianum inhibited spore germination and hence colony formation of test fungi regardless of time delay.     

Binding and biological properties of lipopolysaccharide Proteus vulgaris O25 (48/57)–chitosan complexes

In this study the negatively charged Proteus vulgaris O25 LPS was chosen for studying interaction with polycationic chitosan. The complex formation of LPS with chitosan was demonstrated using gradient centrifugation and laser interferometry method. The presented results have shown that laser interferometry method is sensitive enough for LPS–chitosan interaction studies. The changing in the ultra structure of LPS during binding with chitosan was observed by electronic microscope. The interaction of P. vulgaris O25 LPS with chitosan was shown to modulate significantly the biological activities of LPS. The toxicity of P. vulgaris O25 LPS decreased 10-fold after forming complexes with chitosan at injection to mice in the similar concentration of endotoxin. The complex LPS–chitosan was less effective than LPS alone in Limulus amabocyte lysate assay. Induction of TNF biosynthesis by LPS–chitosan complex was found to be 65% lower than that by parent LPS at concentration of 100 ng/ml.     

Methylated N-aryl chitosan derivative/DNA complex nanoparticles for gene delivery: Synthesis and structure–activity relationships

In this study, three kinds of methylated chitosan containing different aromatic moieties were synthesized by two steps, reductive amination and methylation, respectively. The chemical structures of all methylated derivatives, methylated N-(4-N,N-dimethylaminocinnamyl) chitosan chloride (MDMCMChC), methylated N-(4-N,N-dimethylaminobenzyl) chitosan chloride (MDMBzChC), and methylated N-(4-pyridinylmethyl) chitosan chloride (MPyMeChC) were characterized by ATR–FTIR and ¹H NMR spectroscopy. The complexes between the chitosan derivatives and plasmid DNA at different N/P ratios were characterized by gel electrophoresis, dynamic light scattering, and atomic force microscopic techniques. The smallest particle sizes of these complexes were obtained at N/P ratio of 5 and ranged from 95 to 124 nm while the zeta-potentials were in the range of 18–27 mV. Transfection efficiencies of these complexes were investigated by expression of the plasmid DNA encoding green fluorescence protein (pEGFP-C2) on human hepatoma cells (Huh 7 cells) compared to N,N,N-trimethyl chitosan chloride (TMChC). The rank of transfection efficiency was MPyMeChC > MDMBzChC > TMChC > MDMCMChC, respectively. The cytotoxicity of these complexes was also studied by MTT assay where the MPyMeChC complex exhibited less toxicity than other derivatives even at high N/P ratios. Therefore, MPyMeChC demonstrated potential as its safe and efficient gene carrier.     

Kinetics and mechanisms of depolymerization of alginate and chitosan in aqueous solution

The kinetics and mechanisms of depolymerization of aqueous chitosan and alginate solutions at elevated temperatures have been investigated. Chitosan salts of different degree of acetylation (F_A), type of counterions (-glutamate, -chloride) and degree of purity were studied. One commercially available highly purified sodium alginate sample with high content of guluronic acid (G) was also studied. Furthermore, the influence of oxygen, H⁺ and OH⁻ ions on the initial depolymerization rates was investigated. Depolymerization kinetics was followed by measuring the time courses of the apparent viscosity and the intrinsic viscosity. The initial rate constants for depolymerization were determined from the intrinsic viscosity data converted to a quantity proportional to the fraction of bonds broken. The activation energies of the chitosan chloride and chitosan glutamate solutions with pH close to 5 and the same degree of acetylation, F_A = 0.14, were determined from the initial rate constants to be 76 ± 13 kJ/mol and 80 ± 11 kJ/mol, respectively.The results reported herein suggest that the stability of aqueous chitosan and alginate solutions at pH values 5–8 will be influenced by oxidative–reductive depolymerization (ORD) as the primary mechanism as long as transition metal ions are presented in the samples. Acid – and alkaline depolymerization will be the primary mechanisms for highly purified samples.     

Synthesis and properties of chitosan hydrogels modified with heterocycles

Preparation and properties of chitosan modified with heterocycles in absence or presence of gluteraldehyde as a cross linker is described. New modified chitosan–heterocyclic hydrogels were prepared from chitosan and heterocyclic compounds such as N,N′-biisomaleimide, N,N′-biisophthalimide, and N,N′-phthalimidomaleimide via a crosslinking reaction. The new hydrogels chemical structure was characterized by spectral analysis (IR), X-ray diffraction, thermal gravimetric analysis (TGA), solubility, and swellability in water and different organic solvents. Evaluation of the efficiency of the new hydrogels to uptake copper and cobalt ions from aqueous systems was carried out and promising results were obtained.     

Antioxidant properties of chitosan from crab shells

Crab chitosan was prepared by alkaline N-deacetylation of crab chitin for 60, 90 and 120 min and its antioxidant properties studied. Chitosan exhibited showed antioxidant activities of 58.3–70.2% at 1 mg/mL and showed reducing powers of 0.32–0.44 at 10 mg/mL. At 10 mg/mL, the scavenging ability of chitosan C60 on 1,1-diphenyl-2-picrylhydrazyl radicals was 28.4% whereas those of other chitosans were 46.4–52.3%. At 0.1 mg/mL, scavenging abilities on hydroxyl radicals were 62.3–77.6% whereas at 1 mg/mL, chelating abilities on ferrous ions were 82.9–96.5%. All EC₅₀ values of antioxidant activity were below 1.5 mg/mL. With regard to antioxidant properties assayed, the effectiveness of chitosans C60, C90 and C120 correlated with their N-deacetylation times. Overall, crab chitosan was good in antioxidant activity, scavenging ability on hydroxyl radicals and chelating abilities on ferrous ions and may be used as a source of antioxidants, as a possible food supplement or ingredient in the pharmaceutical industry.     

Biological control of Pythium aphanidermatum in cucumber with a combined application of Lysobacter enzymogenes strain 3.1T8 and chitosan

Pythium aphanidermatum (Edson) Fitzp., causing root and crown rot in cucumber, was successfully managed by Lysobacter enzymogenes strain 3.1T8. Greenhouse experiments were performed with cucumber plants grown in rockwool blocks up to 5 weeks with a recirculated nutrient solution. Application of L. enzymogenes 3.1T8 in combination with chitosan (the deacetylated derivative of chitin) reduced the number of diseased plants by 50–100% in four independent experiments relative to the Pythium control. Application of chitosan or the bacterial inoculant alone was not effective. Washed bacterial cells plus chitosan inhibited Pythium-induced disease, but the supernatant without bacterial cells combined with chitosan was not effective. The most effective and convenient type of commercially available chitosan was selected. Chitosan disappeared from the hydroponic system within 24 h after application, which we attribute to enzyme expression of L. enzymogenes 3.1T8 induced by the exposure to chitosan. Plate counts of the nutrient solution on a general bacterial medium showed the dominance of the inoculated strain, and an increased bacterial population growing on chitin and chitosan as single carbon source. The population density of L. enzymogenes 3.1T8 on the cucumber roots was investigated with a strain specific real-time TaqMan PCR. Highest chitosan concentrations applied (0.1 and 0.03 g/plant) resulted in the highest numbers of L. enzymogenes 3.1T8 present on roots; i.e. 10⁸–10⁹ cells/g root. Substantially higher numbers of bacterial cells were observed by scanning electron microscopy after application of chitosan; no morphological or other qualitative differences were found. The results indicate that addition of chitosan enhanced the biocontrol efficacy of L. enzymogenes 3.1T8; either chitosan serves as C- and N-source for the antagonist, induces antagonistic gene expression, or both.     

Induction of β-N-acetylhexosaminidase in Aspergillus oryzae

Summary Extracellular -N-acetylhexosaminidase in basic specific activity 1.5 U/mg protein was induced 15 – 35 times (up to 50 U/mg protein) by mixture of chitooligomers (crude chitin hydrolysate), 10 – 20 times (20 – 30 U/mg protein) by N-acetylglucosamine, and 10 times (14 U/mg protein) by chitosan in Aspergillus oryzae. Addition of NaCl (15 – 23 g/l) to the cultivation medium enhanced the induction in 10 – 20 %.     

Production of fungal chitosan by solid substrate fermentation followed by enzymatic extraction

An improved method is described for the production of chitosan from mycelia of the fungus Gongronella butleri, grown by solid substrate fermentation on sweet potato. The chitosan was extracted subsequently by 11 M NaOH at 45 °C, and 0.35 M acetic acid at 95 °C. The resulting extract was clarified using a heat-stable, commercial -amylase. The yield (4–6 g/100 g mycelia) and relative number average molecular weight (44–54 kDa) of the chitosan increased with increasing duration of fungal growth up to the sixth day.     

Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Synthesis and characterization of a novel MPEG–chitosan diblock copolymer and self-assembly of nanoparticles

In this paper, a simple and novel method based on free-radical polymerization initiated by potassium persulfate (KPS) was developed to synthesize the MPEG–chitosan diblock copolymer (MPEG–CS). The obtained MPEG–CS diblock copolymer was characterized by Fourier transform infrared (FTIR), ¹H nuclear magnetic resonance (¹H NMR), X-ray diffraction (XRD) and differential scanning calorimetry (DSC), respectively. The MPEG–CS copolymer could self-assemble into nanoparticles in aqueous solution. A typical TEM photography indicated that the well-spherical nanoparticles with diameter at about 200 nm were obtained. In vitro cell culture assay indicated that MPEG–CS nanoparticles are non-toxic and cell-compatible as the polymer concentration was smaller than 0.6 mg/ml. In conclusion, the obtained MPEG–CS nanoparticles might have great potential application in drug-delivery system.     

Novel chitosan membranes as support for lipases immobilization: Characterization aspects

Membranes of chitosan (QS), chitosan treated with glutaraldehyde (QGA) and chitosan crown ether (QCE) were utilized as carriers for immobilization of Candida antarctica and Candida rugosa lipases. Membrane supports were characterized by several techniques (Raman spectroscopy, elemental analysis by CHN determination and Energy Dispersive X-ray (EDX), water sorption isotherms, and surface area from nitrogen sorption data). To verify the presence of enzymes, some of these techniques were also used for lipase on chitosan biocatalytic systems. Measurements of protein load from Biuret assays and catalytic activity in esterification in nonaqueous media were also made for the immobilized enzymes. Sorption isotherms at 20, 30, 40 and 50 °C for QS, QGA and QCE supports were fitted to the Guggenheim, Anderson and Böer model. GAB monolayer moisture parameter, Xm, varied between 0.029 and 0.051 for QS, 0.039 and 0.058 for QGA and 0.039–0.075 g of water g⁻¹ s.s. for QCE membranes. Elemental analysis and Raman spectra measurements of the lipase, supports and immobilized lipase systems gave evidence of the presence of enzymes on supports. Chitosan supports with internal surface area (m2 g⁻¹) among 3.31 and 1.26 were obtained. Regardless of these low values, acceptable protein load (0.61 to 3.21%) and esterification initial rates were achieved (0.88–2.75 mmol min⁻¹ g of protein⁻¹).     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Macromolecular conformation of chitosan in dilute solution: A new global hydrodynamic approach

Chitosans of different molar masses were prepared by storing freshly prepared samples for up to 6 months at either 4, 25 or 40 °C. The weight-average molar masses, M_w and intrinsic viscosities, [η] were then measured using size exclusion chromatography coupled to multi-angle laser light scattering (SEC-MALLS) and a “rolling ball” viscometer, respectively.The solution conformation of chitosan was then estimated from:

(a) the Mark–Houwink–Kuhn–Sakurada (MHKS) power law relationship [η] = kM_w^a and

(b) the persistence length, L_p calculated from a new approach based on equivalent radii [Ortega, A., & Garcia de la Torre, J. (2007). Equivalent radii and ratios of radii from solution properties as indicators of macromolecular conformation, shape, and flexibility. Biomacromolecules, 8, 2464–2475].

Both the MHKS power law exponent (a = 0.95 ± 0.01) and the persistence length (L_p = 16 ± 2 nm) are consistent with a semi-flexible rod type (or stiff coil) conformation for all 33 chitosans studied. A semi-flexible rod conformation was further supported by the Wales–van Holde ratio, the translational frictional ratio and sedimentation conformation zoning.     

Effect of Foliar Application of Chitin and Chitosan Oligosaccharides on Photosynthesis of Maize and Soybean

On the first day after foliar application, chitosan pentamer (CH5) and chitin pentamer (CHIT5) decreased net photosynthetic rate (P _N) of soybean and maize, however, on subsequent days there was an increase in P _N in some treatments. CH5 caused an increase in maize P _N on day 3 at 10^–5 and 10^–7 M; the increases were 18 and 10 % over the control plants. This increase was correlated with increases in stomatal conductance (g _s) and transpiration rate (E), while the intercellular CO₂ concentration (C _i) was not different from the control plants. P _N of soybean plants did not differ from the control plants except for treatment CH5 (10^–7 M) which caused an 8 % increase on day 2, along with increased g _s, E, and C _i. On days 5 and 6 the CHIT5 treatment caused a 6–8 % increase in P _N of maize, which was accompanied by increases in g _s, E, and C _i. However, there was no such increase for soybean plants treated with CHIT5. In general, foliar application of high molecular mass chitin (CHH) resulted in decreased P _N, particularly for 0.010 % treated plants, both in maize and soybean. Foliar applications of chitosan and chitin oligomers did not affect (p > 0.05) maize or soybean height, root length, leaf area, shoot or root or total dry mass.     

Removal of inorganic ions from wastewaters by immobilized microalgae

Anabaena doliolum and Chlorella vulgaris immobilized on chitosan were more efficient at removing NO₃ ^–, NO₂ ^p–, PO₄ ^3– and CR₂O₇ ^2– from wastewaters than cells immobilized on agar, alginate, carrageenan or even free cells. Carrageenan-immobilized cells, however, were better at removing NH₄ ⁺ and Ni²⁺. The PO₄ ^3– uptake capacity was significantly increased in cells starved of PO₄ ^3– for 24 h. Agar-immobilized cells, though having good metal and nutrient uptake efficiency, had only a slow growth rate. Chitosan is recommended as an algal support for wastewater detoxification.The authors are with the Laboratory of Algal Biology, Department of Botany, Banaras Hindu University, Varanasi-221005, India     

Colorimetric assay of chitosan in presence of proteins and polyelectrolytes by using o-phthalaldehyde

A novel approach of colorimetric quantification of chitosan based on the derivatization reaction of its primary amino groups with o-phthalaldehyde and a thiol – N-acetyl-l-cysteine has been developed. The reaction of equal volumes of sample solution and the reagent solution was allowed to proceed for 1 h, and then the absorbance values were measured at 340 nm against the reference solution. The procedure conditions have been optimized for chitosan assay in the presence of polyanionic electrolyte dextran sulphate (pH 8.9, the reagent solution: 4.0 mM o-phthalaldehyde, 2.6 mM N-acetyl-l-cysteine, 0.25 M NaCl). The method has proven to be convenient and reliable for quantitative determination of either the concentrations of chitosans of various molecular weights or their degree of deacetylation. The different reactivity of chitosans and proteins can be used in order to determine chitosan in presence of the protein. This approach ensured accurate assay within the chitosan concentrations ranging from 0.01 to 0.15 mg/ml and could be applied for quantitative analysis of chitosan in protein-loaded microparticles.     

Enhanced paclitaxel production induced by the combination of elicitors in cell suspension cultures of Taxus chinensis

Taxus chinensis suspension cells were cultured in the modified Gamborg's B5 medium. Addition of 50 mg chitosan l^–1, 60 M methyl jasmonate and 30 M Ag⁺ resulted in the greatest paclitaxel production, at 25 mg l^–1 in the cultures, being almost 40 times higher than that of the control culture, 10 times higher than that of the culture exposed to Ag⁺, 6 times higher than that of the culture elicited by chitosan and almost double that of the culture elicited by methyl jasmonate.