Chemiluminescence detection of Escherichia coli in fresh produce obtained from different sources

A chemiluminescence‐based assay is developed for the rapid detection of Escherichia coli in fresh produce. The assay was based on the reaction of β‐galactosidase enzyme from E. coli with a phenylgalactosidase‐substituted dioxetane substrate. Light emitted from the reaction was measured in a luminometer and data correlated with counts of E. coli enumerated on sorbitol–MacConkey agar plates. A strain of E. coli O157:H7 was used to inoculate samples of fresh produce to differentiate the inoculum from the natural E. coli potentially present on the produce. Fresh market samples were tested for generic E. coli and E. coli O157:H7. Signi?cant differences in light emission were found in samples with high initial E. coli counts when market samples were compared to respective heat‐treated samples. The assay was able to detect E. coli in all produce tested, particularly at higher contamination or inoculation levels. The sensitivity of the assay ranged between 10²–10⁵ CFU within 30 min. The chemiluminescence assay provides a simple and rapid method for detection of viable E. coli, an important step towards enhancing food safety. Copyright © 2004 John Wiley & Sons, Ltd.     

Detection of nonopioid β‐endorphin receptor in the rat myocardium

Two selective agonists of nonopioid β‐endorphin receptor, synthetic peptides TPLVTLFK (octarphin) and SLTCLVKGFY (immunorphin), were labeled with tritium to specific activity of 29 and 25 Ci/mmol, respectively. Both labeled peptides were found to bind to high‐affinity naloxone‐insensitive binding sites on the membranes isolated from the rat myocardium (Kd = 2.0 ± 0.2 and 2.5 ± 0.3 nM, respectively). The [³H]octarphin specific binding to the myocardial membranes was inhibited by unlabeled β‐endorphin (Ki = 1.9 ± 0.2 nM) and immunorphin (Ki = 2.2 ± 0.3 nM). The [³H]immunorphin specific binding with the membranes was inhibited by unlabeled β‐endorphin (Ki = 2.3 ± 0.3 nM) and octarphin (Ki = 2.4 ± 0.3 nM). The binding specificity study revealed that these binding sites were insensitive not only to naloxone but also to α‐endorphin, γ‐endorphin, [Met⁵]enkephalin and [Leu⁵]enkephalin. Thus, β‐endorphin, immunorphin and octarphin bind to the common high‐affinity naloxone‐insensitive receptor of the rat myocardial membranes. Copyright © 2011 European Peptide Society and John Wiley & Sons, Ltd.     

Determination of Tanshinones in Danshen (Salvia miltiorrhiza) by High‐Performance Liquid Chromatography with Fluorescence Detection after pre‐Column Derivatisation

Introduction

Tanshinones are a major class of bioactive ingredients in the traditional herbal medicines, Danshen (Salvia miltiorrhiza). A sensitive and reliable determination method for tanshinones is useful to ensure the quality of Danshen.

Objective

To develop a sensitive and selective analytical method for tanshinones by high‐performance liquid chromatography (HPLC) with fluorescence detection after pre‐column derivatisation.

Methodology

The proposed method depends on derivatisation reaction of tanshinones with 4‐carbomethoxybenzaldehyde and ammonium acetate forming intensely fluorescent imidazole derivative.

Results

The proposed method provided excellent sensitivity with the detection limits of 3.3 nM (66 fmol/injection), 3.2 nM (64 fmol/injection) and 2.0 nM (40 fmol/injection) for cryptotanshinone, tanshinone I and tanshinone IIA, respectively, without the necessity of complicated instrumentations. The developed method is successfully applied to quantify the contents of tanshinones in Danshen.

Conclusion

The developed method is the first analytical method for tanshinones by fluorescence detection. Since the derivatisation reaction is selective for the o‐quinone structure of tanshinone, the developed method will become a suitable mean for the discovering of tanshinone type diterpenoids from herbal samples. Copyright © 2017 John Wiley & Sons, Ltd.     

A rhodamine‐triazole fluorescent chemodosimeter for Cu2+ detection and its application in bioimaging

A rhodamine‐based fluorescent chemodosimeter rhodamine hydrazide‐triazole (RHT) tethered with a triazole moiety was developed for Cu²⁺ detection. In aqueous medium, the RHT probe exhibited high selectivity and sensitivity toward Cu²⁺ among other metal ions. The addition of Cu²⁺ triggered a fluorescence emission of RHT by 384‐fold (Φ = 0.33) based on a ring‐opening process and a subsequent hydrolysis reaction. Moreover, RHT also showed a selective colorimetric response toward Cu²⁺ from colorless solution to pink, readily observed with the naked eye. The limit of detection of RHT for Cu²⁺ was calculated to be 1 nM (0.06 ppb). RHT was successfully demonstrated to detect Cu²⁺ in Chang liver cells by confocal fluorescence microscopy.     

Direct competitive chemiluminescence immunoassays based on gold‐coated magnetic particles for detection of chloramphenicol

Direct competitive chemiluminescence immunoassays (CLIA) based on gold‐coated magnetic nanospheres (Au‐MNPs) were developed for rapid analysis of chloramphenicol (CAP). The Au‐MNPs were modified with carboxyl groups and amino groups by 11‐mercaptoundecanoic acid (MUA) and cysteamine respectively, and then were respectively conjugated with CAP base and CAP succinate via an activating reaction using 1‐ethyl‐3‐(3‐dimethylaminopropyl)carbodiimide hydrochloride (EDC) and N‐hydroxysuccinimide (NHS). NSP‐DMAE‐NHS, a new and effective luminescence reagent, was employed to label anti‐CAP antibody (mAb) as a tracer in direct CLIA for CAP detection using a ‘homemade’ luminescent measurement system that was set up with a photomultiplier tube (PMT) and a photon counting unit linked to a computer. The sensitivities and limits of detection (LODs) of the two methods were obtained and compared according to the inhibition curves. The 50% inhibition concentration (IC₅₀) values of the two methods were about 0.044 ng/mL and 0.072 ng/mL respectively and LODs were approximately 0.001 ng/mL and 0.006 ng/mL respectively. To our knowledge, they were much more sensitive than any traditional enzyme‐linked immunosorbent assay (ELISA) ever reported. Moreover, the new luminescence reagent NSP‐DMAE‐NHS is much more sensitive and stable than luminol and its derivatives, contributing to the sensitivity enhancement. Copyright © 2015 John Wiley & Sons, Ltd.     

Quantification of receptor targeting aptamer binding characteristics using single-molecule spectroscopy

This experimental design presents a single molecule approach based on fluorescence correlation spectroscopy (FCS) for the quantification of outer membrane proteins which are receptors to an aptamer specifically designed to target the surface receptors of live Salmonella typhimurium. By using correlation analysis, we also show that it is possible to determine the associated binding kinetics of these aptamers on live single cells. Aptamers are specific oligonucleotides designed to recognize conserved sequences that bind to receptors with high affinity, and therefore can be integrated into selective biosensor platforms. In our experiments, aptamers were constructed to bind to outer membrane proteins of S. typhimurium and were assessed for specificity against Escherichia coli. By fluorescently labeling aptamer probes and applying FCS, we were able to study the diffusion dynamics of bound and unbound aptamers and compare them to determine the dissociation constants and receptor densities of the bacteria for each aptamer at single molecule sensitivity. The dissociation constants for these aptamer probes calculated from autocorrelation data were 0.1285 and 0.3772 nM and the respective receptor densities were 42.27 receptors per µm² and 49.82 receptors per µm². This study provides ample evidence that the number of surface receptors is sufficient for binding and that both aptamers have a high‐binding affinity and can therefore be used in detection processes. The methods developed here are unique and can be generalized to examine surface binding kinetics and receptor quantification in live bacteria at single molecule sensitivity levels. The impact of this study is broad because our approach can provide a methodology for biosensor construction and calculation of live single cell receptor‐ligand kinetics in a variety of environmental and biological applications. Bioeng. 2011; 108:1222–1227. © 2010 Wiley Periodicals, Inc.     

A MEMS based amperometric detector for E. Coli bacteria using self-assembled monolayers

We developed a system for amperometric detection of Escherichia coli (E. coli) based on the integration of microelectromechanical systems (MEMS), self-assembled monolayers (SAMS), DNA hybridization, and enzyme amplification. Using MEMS technology, a detector array was fabricated which has multiple electrodes deposited on a Si wafer and was fully reusable. Using SAMs, a monolayer of the protein streptavidin was immobilized on the working electrode (Au) surface to capture rRNA from E. coli. Three different approaches can be used to immobilize streptavidin onto Au, direct adsorption of the protein on bare Au, binding the protein to a biotinylated thiol SAM on Au, and binding the protein to a biotinylated disulfide monolayer on Au. The biotinylated thiol approach yielded the best results. High specificity for E. coli was achieved using ssDNA–rRNA hybridization and high sensitivity was achieved using enzymatic amplification with peroxidase as the enzyme. The analysis protocol can be conducted with solution volumes on the order of a few microliters and completed in 40 min. The detection system was capable of detecting 1000 E. coli cells without polymerase chain reaction with high specificity for E. coli vs. the bacteria Bordetella bronchiseptica.     

Bare laser‐synthesized Au‐based nanoparticles as nondisturbing surface‐enhanced Raman scattering probes for bacteria identification

The ability of noble metal‐based nanoparticles (NPs) (Au, Ag) to drastically enhance Raman scattering from molecules placed near metal surface, termed as surface‐enhanced Raman scattering (SERS), is widely used for identification of trace amounts of biological materials in biomedical, food safety and security applications. However, conventional NPs synthesized by colloidal chemistry are typically contaminated by nonbiocompatible by‐products (surfactants, anions), which can have negative impacts on many live objects under examination (cells, bacteria) and thus decrease the precision of bioidentification. In this article, we explore novel ultrapure laser‐synthesized Au‐based nanomaterials, including Au NPs and AuSi hybrid nanostructures, as mobile SERS probes in tasks of bacteria detection. We show that these Au‐based nanomaterials can efficiently enhance Raman signals from model R6G molecules, while the enhancement factor depends on the content of Au in NP composition. Profiting from the observed enhancement and purity of laser‐synthesized nanomaterials, we demonstrate successful identification of 2 types of bacteria (Listeria innocua and Escherichia coli). The obtained results promise less disturbing studies of biological systems based on good biocompatibility of contamination‐free laser‐synthesized nanomaterials.

     

Expression of genes encoding the luciferase from Photobacterium leiognathi in Escherichia coli Rosetta (DE3) and its application in NADH detection

Cloning of genes encoding the luciferase from Photobacterium leiognathi YL in Escherichia coli Rosetta (DE3) was performed successfully and the expressed forms of lux AB were purified to homogeneity. Experimental measurements revealed that luciferase from Photobacterium leiognathi YL has good thermal stability and a high residual activity at extreme pH values, which are extremely important for its various ecological, industrial and medical applications. Furthermore, we made a first attempt for quantitative detection of NADH by recombinant E. coli Rosetta (DE3) coupled enzyme system. A good linear relationship between luminescence intensity and NADH with low (1–12 nmol/L) and high (10–500 nmol/L) concentration was observed, whose standard curve was y = 772.97× + 4041.1, R² = 0.9884 and y = 1710× + 4.99 × 10⁵, R² = 0.9727, respectively. Our results demonstrate a high sensitivity of recombinant E. coli coupled enzyme system to NADH on the basis of high soluble expression of recombinant luciferase and continuous and stable expression of some NAD(P)H‐dependent flavin mononucleotide (FMN) reductases.     

Structure of an archaeal-type phosphoenolpyruvate carboxylase sensitive to inhibition by aspartate

The crystal structure of an archaeal‐type phosphoenolpyruvate carboxylase from Clostridium perfringens has been determined based on X‐ray data extending to 3 Å. The asymmetric unit of the structure includes two tetramers (each a dimer‐of‐dimers) of the enzyme. The precipitant, malonate, employed for the crystallization is itself a weak inhibitor of phosphoenolpyruvate carboxylase and a malonate molecule is seen in the active‐site in the crystal structure. The allosteric binding sites for aspartate (an inhibitor) and glucose‐6‐phosphate (an activator) observed in the Escherichia coli and Zea mays phosphoenolpyruvate carboxylase structures, respectively, are not conserved in the C. perfringens structure. Aspartate inhibits the C. perfringens enzyme competitively with respect to the substrate, Mg^++. phosphoenolpyruvate. A mechanism for inhibition is proposed based on the structure and sequence comparisons with other archaeal‐type phosphoenolpyruvate carboxylases with differing sensitivity to inhibition by aspartate. Proteins 2011; © 2011 Wiley‐Liss, Inc.     

Development of a combined immunochromatographic lateral flow assay for accurate and rapid Escherichia coli O157:H7 detection

Escherichia coli O157:H7 is an important pathogenic Bacterium that threatens human health. A convenient, sensitive and specific method for the E. coli O157:H7 detection is necessary. We developed two pairs of monoclonal antibodies through traditional hybridoma technology, one specifically against E. coli O157 antigen and the other specifically against E. coli H7 antigen. Using these two pairs of antibodies, we developed two rapid test kits to specifically detect E. coli O157 antigen and E. coli H7 antigen, respectively. The detection sensitivity for O157 positive E. coli is 1 × 10³ CFU per ml and for H7 positive E. coli is 1 × 10⁴ CFU per ml. Combining these two pairs of antibodies together, we developed a combo test strip that can specifically detect O157: H7, with a detection sensitivity of 1 × 10⁴ CFU per ml, when two detection lines are visible to the naked eye. This is currently the only rapid detection reagent that specifically detects O157: H7 by simultaneously detecting O157 antigen and H7 antigens of E. coli. Our product has advantages of simplicity and precision, and can be a very useful on-site inspection tool for accurate and rapid detection of E. coli O157:H7 infection.     

Binding of synthetic peptide TPLVTLFK to nonopioid beta‐endorphin receptor on rat brain membranes

The synthetic peptide TPLVTLFK corresponding to the sequence 12–19 of β‐endorphin (referred to as octarphin) was found to bind to high‐affinity naloxone‐insensitive binding sites on membranes isolated from the rat brain cortex (K_d = 2.6 ± 0.2 nM ). The binding specificity study revealed that these binding sites were insensitive not only to naloxone but also to α‐endorphin, γ‐endorphin, [Met⁵]enkephalin, and [Leu⁵]enkephalin, as well. The [³H]octarphin specific binding with brain membranes was inhibited by unlabeled β‐endorphin (K_i = 2.4 ± 0.2 nM ) and a selective agonist of nonopioid β‐endorphin receptor decapeptide immunorphin SLTCLVKGFY (K_i = 2.9 ± 0.2 nM ). At the same time, unlabeled octarphin completely (by 100%) inhibited the specific binding of [³H]immunorphin with membranes (K_i = 2.8 ± 0.2 nM ). Thus, octarphin binds with a high affinity and specificity to nonopioid receptor of β‐endorphin on rat brain cortex membranes. Copyright © 2010 European Peptide Society and John Wiley & Sons, Ltd.     

Loop‐mediated isothermal amplification method for rapid detection of Vibrio alginolyticus,the causative agent of vibriosis in mariculture fish

Aims: The purpose of this study was to develop a loop‐mediated isothermal amplification (LAMP) method for the rapid, sensitive and simple detection of Vibrio alginolyticus in mariculture fish. Methods and Results: LAMP primers were designed by targeting the gyrB gene. With Bst DNA polymerase, the target DNA can be clearly amplified for 60 min at 64°C in a simple water bath. The detection sensitivity of the LAMP assay for the detection of V. alginolyticus is about 3·7 × 10² CFU ml^?1 (3·7 CFU per reaction). LAMP products could be judged with agar gel or naked eye after the addition of SYBR Green I. There were no cross‐reactions with other bacterial strains indicating a high specificity of the LAMP. The LAMP method was applied to detect V. alginolyticus‐infected fish tissues effectively. Conclusions: The LAMP established in this study is a simple, sensitive, specific, inexpensive and rapid protocol for the detection of V. alginolyticus. Significance and Impact of the Study: This LAMP method provides an important diagnostic tool for the detection of V. alginolyticus infection both in the laboratory and field.     

Characterization of [3H]LS‐3‐134, a novel arylamide phenylpiperazine D3 dopamine receptor selective radioligand

LS‐3‐134 is a substituted N‐phenylpiperazine derivative that has been reported to exhibit: (i) high‐affinity binding (K_i value 0.2 nM) at human D3 dopamine receptors, (ii) > 100‐fold D3 versus D2 dopamine receptor subtype binding selectivity, and (iii) low‐affinity binding (K_i > 5000 nM) at sigma 1 and sigma 2 receptors. Based upon a forskolin‐dependent activation of the adenylyl cyclase inhibition assay, LS‐3‐134 is a weak partial agonist at both D2 and D3 dopamine receptor subtypes (29% and 35% of full agonist activity, respectively). In this study, [³H]‐labeled LS‐3‐134 was prepared and evaluated to further characterize its use as a D3 dopamine receptor selective radioligand. Kinetic and equilibrium radioligand binding studies were performed. This radioligand rapidly reaches equilibrium (10–15 min at 37°C) and binds with high affinity to both human (K_d = 0.06 ± 0.01 nM) and rat (K_d = 0.2 ± 0.02 nM) D3 receptors expressed in HEK293 cells. Direct and competitive radioligand binding studies using rat caudate and nucleus accumbens tissue indicate that [³H]LS‐3‐134 selectively binds a homogeneous population of binding sites with a dopamine D3 receptor pharmacological profile. Based upon these studies, we propose that [³H]LS‐3‐134 represents a novel D3 dopamine receptor selective radioligand that can be used for studying the expression and regulation of the D3 dopamine receptor subtype.     

False‐negative β‐d‐glucuronidase reactions in membrane lactose glucuronide agar medium used for the simultaneous detection of coliforms and Escherichia coli from water

Aims: Testing for β‐d ‐glucuronidase activity has become the basis of many methods for the detection of Escherichia coli in both food and water. Used in combination with tests for the presence of β‐d ‐glucuronidase, these tests offer a simple method for simultaneously detecting coliforms and E. coli. The purpose of this study was to determine the effectiveness of several different procedures in detecting β‐d ‐glucuronidase activity and hence in detecting E. coli. Methods and Results: The ability of membrane lactose glucuronide agar (MLGA), Colilert‐18^®, MI agar, Colitag^® and Chromocult agar to detect β‐d ‐glucuronidase activity was tested with over 1000 isolates of E. coli recovered from naturally contaminated water samples. Four of the media gave very similar results but MLGA failed to detect glucuronidase activity in 15·6% of the cultures tested. Conclusions: MLGA had very poor sensitivity for the detection of β‐d ‐glucuronidase activity in strains of E. coli isolated from naturally contaminated water. This is probably because of the fact that β‐d ‐glucuronidase activity is pH‐sensitive and that acid is formed by E. coli during fermentation of lactose in MLGA. Significance and Impact of the Study: The detection of E. coli in drinking water is the primary test used to establish faecal contamination. The poor sensitivity of MLGA in detecting β‐d ‐glucuronidase activity suggests that this medium and others containing high concentrations of fermentable carbohydrate should not be used for the detection of E. coli.     

Highly fluorescent au nanoclusters: Electrostatically induced phase transfer synthesis for Cu2+ sensing

This paper reports a convenient method for the synthesis of highly fluorescent Au nanoclusters (NCs) via electrostatically induced phase transfer. Furthermore, on the basis of an aggregation‐induced fluorescence quenching mechanism, the potential application for Cu²⁺ sensing on the fluorescence emission of the Au NCs is discussed. These prepared fluorescent Au NCs offer acceptable sensitivity, high selectivity, and a limit of quantitation of 0.02 μM for the measurement of Cu²⁺, which is lower than the maximum level (1 ppm, equals to 15.6 μM) of Cu²⁺ permitted in drinking water in China. This study contributes to the further development of practical applications with fluorescent NCs.     

Interaction of glucose‐derived carbon quantum dots with silver and gold nanoparticles and its application for the fluorescence detection of 6‐thioguanine

The interaction of glucose‐derived carbon quantum dots (CQDs) with silver (Ag) and gold (Au) nanoparticles (NPs) was explored by fluorescence spectroscopy. Both metal NPs cause an efficient quenching of CQD fluorescence, which is likely due to the energy transfer process between CQDs as donors and metal NPs as acceptors. The Stern–Volmer plots were evaluated and corresponding quenching constants were found to be 1.9 × 10¹⁰ and 2.2 × 10⁸ M^?1 for AgNPs and AuNPs, respectively. The analytical applicability of these systems was demonstrated for turn‐on fluorescence detection of the anti‐cancer drug, 6‐thioguanine. Because the CQD–AgNP system had much higher sensitivity than the CQD–AuNP system, we used it as a selective fluorescence probe in a turn‐on assay of 6‐thioguanine. Under optimum conditions, the calibration graph was linear from 0.03 to 1.0 μM with a detection limit of 0.01 μM. The developed method was applied to the analysis of human plasma samples with satisfactory results.     

Revealing interaction between sulfobutylether‐β‐cyclodextrin and reserpine by chemiluminescence and site‐directed molecular docking

The host–guest interaction between sulfobutylether‐β‐cyclodextrin (SBE‐β‐CD) and reserpine (RSP) is described using flow injection‐chemiluminescence (FI‐CL) and site‐directed molecular docking methods. It was found that RSP could inhibit the CL intensity produced by a luminol/SBE‐β‐CD system. The decrease in CL intensity was logarithmic over an RSP concentration range of 0.03 to 700.0 nM, giving a regression equation of ?I = 107.1lgC_RES + 186.1 with a detection limit of 10 pM (3σ). The CL assay was successfully applied in the determination of RSP in injection, saliva and urine samples with recoveries in the range 93.5–106.1%. Using the proposed CL model, the binding constant (K_CD‐R) and the stoichiometric ratio of SBE‐β‐CD/RSP were calculated to be 7.4 × 10⁶ M^‐1 and 1 : 1, respectively. Using molecular docking, it was confirmed that luminol binds to the small cavity of SBE‐β‐CD with a nonpolar interaction, while RSP targeted the larger cavity of SBE‐β‐CD and formed a 1 : 1 complex with hydrogen bonds. The proposed new CL method has the potential to become a powerful tool for revealing the host–guest interaction between CDs and drugs, as well as monitoring drugs with high sensitivity. Copyright © 2013 John Wiley & Sons, Ltd.