Development of a Prolonged-Release Pramipexole Transdermal Patch: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The current study aimed to develop a prolonged-release pramipexole (PPX) transdermal patch for the treatment of Parkinson’s disease. Permeation parameters of PPX were investigated using human cadaver skin. Pramipexole patches were prepared using DURO-TAK^® pressure-sensitive-adhesive (PSA) and evaluated for drug stability, drug loading, in vitro drug release, and in vitro permeation through mouse skin. The results indicated that blends of DURO-TAK^® 87-2852 and DURO-TAK^® 87-2510 were suitable for creating a prolonged-release PPX patch due to their advantages in drug release, drug loading, and stability. The final formulation consisted of 87-2852/87-2510 (70:30), 10% PG, and 15% PPX and showed a cumulative permeation amount of 1497.19?±?102.90 μg/cm² with a continuous flux over 6.0 μg/(cm²·h) across human cadaver skin for 7 days. In vivo studies in rats indicated that PPX patch produced a significantly longer (p?<?0.001) half-life (t _1/2, 75.16?±?17.37 h) and mean residence time (MRT, 135.89?±?24.12 h) relative to oral tablets (Sifrol^®) and had a relative bioavailability of 51.64?±?21.32%. Therefore, this study demonstrated the feasibility of developing a prolonged-release PPX patch, which proposed the potential to serve as an alternate to conventional oral tablets and may therefore improve patient compliance.     

Cardiovascular effects of transdermally delivered bupranolol in rabbits: effect of chemical penetration enhancers

Bupranolol is a promising candidate for transdermal drug delivery system (TDDS) development. The effect of permeation enhancers on the in vivo delivery and beta-blocking effect of reservoir type TDDS was studied in comparison with intravenous BPL in rabbits. The beta-blocking effect was quantified by measuring the inhibition of isoprenaline induced tachycardia in rabbits after BPL administration via transdermal and intravenous routes. The reservoir type TDDS containing a hydroxypropyl cellulose gel and polyethylene membrane was used as a control device. In comparison, the TDDS containing skin penetration enhancers, either 2-pyrrolidone or partially methylated beta cyclodextrin (PMbetaCD) were evaluated. The control device (no enhancer) produced about 52% inhibition of isoprenaline induced tachycardia at 2 h and the effect continued over 24 h application period, however, the devices with 2-pyrolidone or PMbetaCD produced about 85% inhibition of isoprenaline induced tachycardia at 3 h and the same effect continued over 24 h application period. Likewise, the AUC of these devices were significantly higher than that of control device. The intravenous bupranolol showed rapid decline in the pharmacodynamic effect with time indicating its rapid elimination. The in vivo delivery of bupranolol (as estimated by a mass balance study) from the devices made with pyrolidone or PMbetaCD was 3-fold higher than that of control. The results of this study strongly suggest that the penetration enhancers in the TDDS increased the in vivo delivery of BPL, thereby increased the beta-blocking activity of BPL by 50-60% higher than control, enabling the reduction of the TDDS patch size, accordingly.     

Control of Transdermal Permeation of Hydrocortisone Acetate from Hydrophilic and Lipophilic Formulations

The purpose of this research was the preparation of four formulations containing hydrocortisone acetate (HCA) for topical application, including two aqueous systems (hydrophilic microemulsion and aqueous gel) and two systems with dominant hydrophobicity (hydrophobic microemulsion and ointment). The formulations were tested for the release and permeation of HCA across an animal membrane. The release of HCA was found comparable for the four systems. The two microemulsions promote permeation across an ex-vivo membrane, examined by means of a Franz cell. Hydrophobic microemulsion guarantees the highest solubility (2,370 μg/ml) and flux (133 μg/cm².h) of the drug, since it contains almost 40% Transcutol, a permeation enhancer. Gel and ointment provide lower solubility and flux, being the values, related to the ointment, the lowest ones (562 μg/ml and 0.4 μg/cm².h). Experimental results allow the conclusion that gel and ointment can be suitable when it is desirable to minimize absorption of topically applied HCA as to keep the drug restricted to the diseased area and prevent side effects of the systemic presence of HCA.     

Formulation and Evaluation of Buccal Patches for Delivery of Atenolol

Buccal patches for the delivery of atenolol using sodium alginate with various hydrophilic polymers like carbopol 934 P, sodium carboxymethyl cellulose, and hydroxypropyl methylcellulose in various proportions and combinations were fabricated by solvent casting technique. Various physicomechanical parameters like weight variation, thickness, folding endurance, drug content, moisture content, moisture absorption, and various ex vivo mucoadhesion parameters like mucoadhesive strength, force of adhesion, and bond strength were evaluated. An in vitro drug release study was designed, and it was carried out using commercial semipermeable membrane. All these fabricated patches were sustained for 24 h and obeyed first-order release kinetics. Ex vivo drug permeation study was also performed using porcine buccal mucosa, and various drug permeation parameters like flux and lag time were determined.     

Systematic Development of Transethosomal Gel System of Piroxicam: Formulation Optimization, <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation,and <Emphasis Type="Italic">Ex Vivo</Emphasis> Assessment

Piroxicam is used in the treatment of rheumatoid arthritis, osteoarthritis, and other inflammatory diseases. Upon oral administration, it is reported to cause ulcerative colitis, gastrointestinal irritation, edema and peptic ulcer. Hence, an alternative delivery system has been designed in the form of transethosome. The present study describes the preparation, optimization, characterization, and ex vivo study of piroxicam-loaded transethosomal gel using the central composite design. On the basis of the prescreening study, the concentration of lipids and ethanol was kept in the range of 2–4% w/v and 0–40% v/v, respectively. Formulation was optimized by measuring drug retention in the skin, drug permeation, entrapment efficiency, and vesicle size. Optimized formulation was incorporated in hydrogel and compared with other analogous vesicular (liposomes, ethosomes, and transfersomes) gels for the aforementioned responses. Among the various lipids used, soya phosphatidylcholine (SPL 70) and ethanol in various percentages were found to affect drug retention in the skin, drug permeation, vesicle size, and entrapment efficiency. The optimized batch of transethosome has shown 392.730 μg cm^?2 drug retention in the skin, 44.312 μg cm^?2 h^?1 drug permeation, 68.434% entrapment efficiency, and 655.369 nm vesicle size, respectively. It was observed that the developed transethosomes were found superior in all the responses as compared to other vesicular formulations with improved stability and highest elasticity. Similar observations were noted with its gel formulation.     

Water‐compatible silica sol–gel molecularly imprinted polymer as a potential delivery system for the controlled release of salicylic acid

Molecularly imprinted polymers (MIPs) for salicylic acid were synthesized and evaluated in aqueous environments in the aim to apply them as drug delivery carriers. One organic MIP and one inorganic MIP based on the sol–gel process were synthesized. The organic MIP was prepared by radical polymerization using the stoichiometric functional monomer, 1‐(4‐vinylphenyl)‐3‐(3,5‐bis(trifluoromethyl)phenyl)urea, which can establish strong electrostatic interactions with the –COOH of salicylic acid. The sol–gel MIP was prepared with 3‐(aminopropyl)triethoxysilane and trimethoxyphenylsilane, as functional monomers and tetraethyl orthosilicate as the crosslinker. While the organic MIPs bound the target specifically in acetonitrile, they exhibited lower binding in the presence of water, although the imprinting factor increased under these conditions, due to reduced non‐specific binding. The sol–gel MIP has a high specificity and capacity for the drug in ethanol, a solvent compatible with drug formulation and biomedical applications. In vitro release profiles of the polymers in water were evaluated, and the results were modelled by Fick's law of diffusion and the power law. Analysis shows that the release mechanism was predominantly diffusion‐controlled. Copyright © 2014 John Wiley & Sons, Ltd.     

Liquid Crystalline Systems for Transdermal Delivery of Celecoxib: In Vitro Drug Release and Skin Permeation Studies

Liquid crystalline systems of monoolein/water could be a promising approach for the delivery of celecoxib (CXB) to the skin because these systems can sustain drug release, improve drug penetration into the skin layers and minimize side effects. This study evaluated the potential of these systems for the delivery of CXB into the skin based on in vitro drug release and skin permeation studies. The amount of CXB that permeated into and/or was retained in the skin was assayed using an HPLC method. Polarizing light microscopy studies showed that liquid crystalline systems of monoolein/water were formed in the presence of CXB, without any changes in the mesophases. The liquid crystalline systems decreased drug release when compared to control solution. Drug release was independent of the initial water content of the systems and CXB was released from cubic phase systems, irrespective of the initial water content. The systems released the CXB following zero-order release kinetics. In vitro drug permeation studies showed that cubic phase systems allowed drug permeation and retention in the skin layers. Cubic phase systems of monoolein/water may be promising vehicles for the delivery of CXB in/through the skin because it improved CXB skin permeation compared with the control solution.KEY WORDS: celecoxib, drug delivery systems, liquid crystalline system, monoolein, skin permeation     

Sorbitan ester niosomes for topical delivery of rofecoxib

The aim of the present investigation is to encapsulate rofecoxib in niosomes and incorporate the prepared niosomes into dermal gel base for sustained therapeutic action. Niosomes were prepared by lipid film hydration technique and were analyzed for size, entrapment efficiency and drug retention capacity. Niosomal vesicles were then incorporated into blank carbopol gel to form niosomal gel. The in vitro permeation study across pig skin was performed using Keshary-Chien glass diffusion cell. The size and entrapment efficiency of the niosomal vesicles increased with gradual increase in HLB value of nonionic surfactants used. Maximum drug entrapment was observed with Span 20 with HLB value of 8.6 and drug leakage from vesicles was less at refrigerated condition than at the room temperature. Higher proportion of cholesterol made the niosomal formulation more stable with high drug retention properties. The niosomal gel showed a prolong drug release behavior compared to plain drug gel. Differential scanning calorimetric study of drug loaded gel and pig skin after permeation study confirmed inertness of carbopol gel base toward rofecoxib and absence of drug metabolism in the skin during permeation study, respectively. The niosomal formulations were successfully prepared by lipid film hydration technique using cholesterol and Span as nonionic surfactant. Presence of cholesterol made niosomes more stable with high drug entrapment efficiency and retention properties. The lower flux value of niosomal gel as compared to plain drug gel across pig skin assured the prolong drug release behavior with sustained action.     

Development and Evaluation of Ethyl Cellulose-Based Transdermal Films of Furosemide for Improved In Vitro Skin Permeation

Transdermal films of the furosemide were developed employing ethyl cellulose and hydroxypropyl methylcellulose as film formers. The effect of binary mixture of polymers and penetration enhancers on physicochemical parameters including thickness, moisture content, moisture uptake, drug content, drug–polymer interaction, and in vitro permeation was evaluated. In vitro permeation study was conducted using human cadaver skin as penetration barrier in modified Keshary–Chein diffusion cell. In vitro skin permeation study showed that binary mixture, ethyl cellulose (EC)/hydroxypropyl methylcellulose (HPMC), at 8.5:1.5 ratio provided highest flux and also penetration enhancers further enhanced the permeation of drug, while propylene glycol showing higher enhancing effect compared to dimethyl sulfoxide and isopropyl myristate. Different kinetic models, used to interpret the release kinetics and mechanism, indicated that release from all formulations followed apparent zero-order kinetics and non-Fickian diffusion transport except formulation without HPMC which followed Fickian diffusion transport. Stability studies conducted as per International Conference on Harmonization guidelines did not show any degradation of drug. Based on the above observations, it can be reasonably concluded that blend of EC–HPMC polymers and propylene glycol are better suited for the development of transdermal delivery system of furosemide.     

Improved Skin Penetration Using <Emphasis Type="Italic">In Situ</Emphasis> Nanoparticulate Diclofenac Diethylamine in Hydrogel Systems: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Studies

Delivering diclofenac diethylamine transdermally by means of a hydrogel is an approach to reduce or avoid systemic toxicity of the drug while providing local action for a prolonged period. In the present investigation, a process was developed to produce nanosize particles (about 10 nm) of diclofenac diethylamine in situ during the development of hydrogel, using simple mixing technique. Hydrogel was developed with polyvinyl alcohol (PVA) (5.8% w/w) and carbopol 71G (1.5% w/w). The formulations were evaluated on the basis of field emission scanning electron microscopy, texture analysis, and the assessment of various physiochemical properties. Viscosity (163–165 cps for hydrogel containing microsize drug particles and 171–173 cps for hydrogel containing nanosize drug particles, respectively) and swelling index (varied between 0.62 and 0.68) data favor the hydrogels for satisfactory topical applications. The measured hardness of the different hydrogels was uniform indicating a uniform spreadability. Data of in vitro skin (cadaver) permeation for 10 h showed that the enhancement ratios of the flux of the formulation containing nanosize drug (without the permeation enhancer) were 9.72 and 1.30 compared to the formulation containing microsized drug and the marketed formulations, respectively. In vivo plasma level of the drug increased predominantly for the hydrogel containing nanosize drug-clusters. The study depicts a simple technique for preparing hydrogel containing nanosize diclofenac diethylamine particles in situ, which can be commercially viable. The study also shows the advantage of the experimental transdermal hydrogel with nanosize drug particles over the hydrogel with microsize drug particles.     

Extracellular Synthesis and Characterization of Gold Nanoparticles Using <Emphasis Type="Italic">Mycobacterium</Emphasis> sp. BRS2A-AR2 Isolated from the Aerial Roots of the Ghanaian Mangrove Plant, <Emphasis Type="Italic">Rhizophora racemosa</Emphasis>

Through the use of genomes that have undergone millions of years of evolution, marine Actinobacteria are known to have adapted to rapidly changing environmental pressures. The result is a huge chemical and biological diversity among marine Actinobacteria. It is gradually becoming a known fact that, marine Actinobacteria have the capability to produce nanoparticles which have reasonable sizes and structures with possible applications in biotechnology and pharmacology. Mycobacterium sp. BRS2A-AR2 was isolated from the aerial roots of the mangrove plant Rhizophora racemosa. The Mycobacterium was demonstrated for the first time ever to produce AuNPs with sizes that range between 5 and 55 nm. The highest level absorbance of the biosynthesized AuNPs was typical for actinobacterial strains (2.881 at 545 nm). The polydispersity index was measured as 0.207 in DLS and the zeta potential was negatively charged (? 28.3 mV). Significant vibration stretches were seen at 3314, 2358, 1635 and 667 cm^?1 in FT-IR spectra. This demonstrated the possible use of small aliphatic compounds containing –COOH, –OH, –Cl and –NH₂ functional groups in the stabilization of the AuNPs. The effect of the biosynthesized AuNPs on HUVEC and HeLA cell lines was measured at 48 h. IC₅₀ values were determined at 3500 µg/ml concentration for HUVEC and HeLA cell lines at 45.25 and 53.41% respectively.     

Design and In Vitro Evaluation of Finasteride-Loaded Liquid Crystalline Nanoparticles for Topical Delivery

In this study, liquid crystalline nanoparticles (LCN) have been proposed as new carrier for topical delivery of finasteride (FNS) in the treatment of androgenetic alopecia. To evaluate the potential of this nanocarrier, FNS-loaded LCN was prepared by ultrasonication method and characterized for size, shape, in vitro release, and skin permeation–retention properties. The particle size ranged from 153.8 to 170.2 nm with a cubical shape and exhibited controlled release profile with less than 20% of the drug released in the first 24 h. The release profile was significantly altered with addition of different additives. Formulation with lower monoolein exhibited higher skin permeation with a flux rate of 0.061 ± 0.005 μg cm⁻² h⁻¹ in 24 h. The permeation however, significantly increased with glycerol, propylene glycol, and polyethylene glycol 400, while it declined for the addition of oleic acid. A similar trend was observed with skin retention study. In conclusion, FNS-loaded LCN could be advocated as a viable alternative for oral administration of the drug.Key words: androgenetic alopecia, finasteride, liquid crystalline nanoparticles, release, skin permeation–retention     

Evaluation of alternative strategies to optimize ketorolac transdermal delivery

In the present study, 2 alternative strategies to optimize ketorolac transdermal delivery, namely, prodrugs (polyoxyethylene glycol ester derivatives, I–IV) and nanostructured lipid carriers (NLC) were investigated. The synthesized prodrugs were chemically stable and easily degraded to the parent drug in human plasma. Ketorolac-loaded NLC with high drug content could be successfully prepared. The obtained products formulated into gels showed a different trend of drug permeation through human stratum corneum and epidermis. Particularly, skin permeation of ester prodrugs was significantly enhanced, apart from ester IV, compared with ketorolac, while the results of drug release from NLC outlined that these carriers were ineffective in increasing ketorolac percutaneous absorption owing to a higher degree of mutual interaction between the drug and carrier lipid matrix. Polyoxyethylene glycol esterification confirmed to be a suitable approach to enhance ketorolac transdermal delivery, while NLC seemed more appropriate for sustained release owing to the possible formation of a drug reservoir into the skin. Published: August 4, 2006     

The Sensitivity of <Emphasis Type="Italic">In Vitro</Emphasis> Permeation Tests to Chemical Penetration Enhancer Concentration Changes in Fentanyl Transdermal Delivery Systems

Chemical penetration enhancers (CPEs) are frequently incorporated into transdermal delivery systems (TDSs) to improve drug delivery and to reduce the required drug load in formulations. However, the minimum detectable effect of formulation changes to CPE-containing TDSs using in vitro permeation tests (IVPT), a widely used method to characterize permeation of topically applied drug products, remains unclear. The objective of the current exploratory study was to investigate the sensitivity of IVPT in assessing permeation changes with CPE concentration modifications and subsequently the feasibility of IVPT’s use for support of quality control related to relative CPE concentration variation in a given formulation. A series of drug-in-adhesive (DIA) fentanyl TDSs with different amounts of CPEs were prepared, and IVPT studies utilizing porcine and human skin were performed. Although IVPT could discern TDSs with different amounts of CPE by significant differences in flux profiles, maximum flux (J_max) values, and total permeation amounts, the magnitudes of the CPE increment needed to see such significant differences were very high (43–300%) indicating that IVPT may have limitations in detecting small changes in CPE amounts in some TDSs. Possible reasons for such limitations include formulation polymer and/or other excipients, type of CPE, variability associated with IVPT, skin type used, and disrupted stratum corneum (SC) barrier effects caused by CPEs.     

Formulation of Polyherbal Patches Based on Polyvinyl Alcohol and Hydroxypropylmethyl Cellulose: Characterization and <Emphasis Type="Italic">In Vitro</Emphasis> Evaluation

The purpose of this research was to prepare and characterize polyherbal patches made from polyvinyl alcohol (PVA) and hydroxypropylmethyl cellulose (HPMC) with glycerine as a plasticizer. Polyherbal extracts were Luk-Pra-Kob recipes extracted with 95% ethanol. They were prepared by mixing the polymer solutions and glycerine in a beaker; subsequently, the polyherbal extracts were homogeneously mixed. Then, they were transferred into a Petri dish and dried in a hot-air oven at 70?±?2°C for 5 h. The dry polyherbal patches were evaluated for physicochemical properties by Fourier transform infrared spectroscopy, differential scanning calorimetry, X-ray diffraction, and a scanning electron microscope. They were studied for in vitro release and skin permeation of the marker active compound (E)-4-(3′,4′-dimethoxyphenyl)but-3-en-l-ol (compound D) using a modified Franz-type diffusion cell. The polyherbal patches made from PVA as a matrix layer were homogeneous, smooth, and compact relative to HPMC-containing polyherbal patches. The selected polyherbal patches made from PVA produced a release profile with an initial burst effect in which compound D release was 74.21?±?6.13% within 8 h, but compound D could permeate the pig skin only 37.28?±?5.52% and was highly accumulated in newborn pig skin at 35.90?±?6.72%. The in vitro release and skin permeation kinetics of compound D were fitted to the Higuchi model. The polyherbal patches made from PVA could be suitably used for herbal medicine application.     

Evaluation of polymerized rosin for the formulation and development of transdermal drug delivery system: A technical note

Conclusions  Results from the present study conclude that PR in combination with PVP and with incorporation of dibutyl phthalate (30% wt/wt) produces smooth flexible films with improved tensile strength and percentage elongation. The release rate of drug from films and permeation across skin increases with increase in drug and PVP loading but is independent of film thickness. Patches containing PR:PVP (7:3) show promise for pharmacokinetic and pharmacodynamic performance evaluation in a suitable animal model. In view of the overall results reported in the present study, it may be proposed that PR can be used in the design of a matrix type transdermal drug delivery system to prolong the drug release. Published: December 27, 2005     

Enhancement of Skin Permeation and Skin Immunization of Ovalbumin Antigen <Emphasis Type="Italic">via</Emphasis> Microneedles

The purpose of this study was to evaluate the use of different types of microneedles and doses of ovalbumin antigen for in vitro skin permeation and in vivo immunization. In vitro skin permeation experiments and confocal laser scanning microscopy revealed that hollow microneedles had a superior enhancing effect on skin permeation compared with a solid microneedle patch and untreated skin by efficiently delivering ovalbumin-fluorescein conjugate into the deep skin layers. The flux and cumulative amount of ovalbumin-fluorescein conjugate at 8 h after administering with various conditions could be ranked as follows: hollow MN; high dose?>?medium dose?>?low dose?>?MN patch; high dose?>?medium dose?>?low dose?>?untreated skin; high dose?>?medium dose?>?low dose?>?without ovalbumin-fluorescein conjugate. As the dose of ovalbumin-fluorescein conjugate was increased to 500 μg, the antigen accumulated in the skin to a greater extent, as evidenced by the increasing green fluorescence intensity. When the hollow microneedle was used for the delivery of ovalbumin into the skin of mice, it was capable of inducing a stronger immunoglobulin G immune response than conventional subcutaneous injection at the same antigen dose. Immunoglobulin G levels in the hollow MN group were 5.7, 11.6, and 13.3 times higher than those of the subcutaneous injection group for low, medium, and high doses, respectively. Furthermore, the mice immunized using the hollow microneedle showed no signs of skin infection or pinpoint bleeding. The results suggest that the hollow MN is an efficient device for delivering the optimal dose of antigen via the skin for successful immunization.     

Topical Delivery of Fenoprofen Calcium <Emphasis Type="Italic">via</Emphasis> Elastic Nano-vesicular Spanlastics: Optimization Using Experimental Design and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The aim of this study was to investigate the potential of surfactant-based nanovesicular system (spanlastics) for topical delivery of fenoprofen calcium (FPCa) to eliminate its oral gastrointestinal adverse effects. FPCa-loaded spanlastics were prepared by thin film hydration (TFH) technique according to a full factorial design to investigate the influence of formulation variables on the drug entrapment efficiency (%EE), particle size (PS), deformability index (DI), and the % drug released after 24 h through the cellulose membrane (Q24h) using Design-Expert® software. The optimized formula (composed of Span 60 and Tween 60 as an edge activator at weight ratio of 8: 2 in presence of Transcutol P as a cosolvent in the hydration media) exhibited the highest %EE (49.91 ± 2.60%), PS of 536.1 ± 17.14 nm, DI of 5.07 ± 0.06 g, and Q24h of 61.11 ± 2.70%; it was also characterized for morphology and physical stability. In vitro release study of FPCa-loaded spanlastic gel and conventional FPCa gel through a synthetic membrane and hairless rat skin were evaluated. The skin permeation study revealed that spanlastic gel exhibited both consistent and prolonged action. Finally, the % inhibition of carrageenan-induced rat paw edema of spanlastic gel was three times higher than the conventional FPCa gel after 24 h. In conclusion, spanlastic-based gel could be a great approach for improving topical delivery of fenoprofen calcium, providing both prolonged and enhanced anti-inflammatory activity in the treatment of arthritis.     

Sustained Anti-inflammatory Effect of Resveratrol-Phospholipid Complex Embedded Polymeric Patch

Resveratrol-phospholipid complex (Phytosome®) (RSVP) was found better aqueous soluble and permeable than free resveratrol (RSV). RSVPs were incorporated in polymeric patch prepared by solvent casting method using Eudragit RL 100, PVP K30, and PEG 400 for application on dermal sites for sustained treating of inflammation. Prepared patches were evaluated for various physicochemical properties, surface morphology by SEM, TEM, and compatibility of patch components by FT-IR and DSC studies. Optimized formulation (F9) gave 95.79?±?3.02% drug release and 51.36% (4.28?±?0.48 mg/cm²) skin permeation after 24 h. Skin extract when examined for drug accumulation showed 38.31?±?2.42% drug content. FE-SEM images of the patch taken after drug release and skin permeation studies showed that RSVPs in polymeric patch are stable and retain their structure after 24 h long exposure to physiologic environment. Sustained anti-inflammatory effect was established in carrageenan-induced paw edema model in which test formulation gave 84.10% inhibition of inflammation at 24 h as compared to 39.58% for standard diclofenac sodium gel. The CLSM study confirmed the localization of RSVPs for a longer period, thus enabling drug targeting to the dermis for sustained effect. Skin irritation test on rabbit revealed that the patches are safe for skin application. Histological observations suggested that after exposure to the permeants, the SC integrity had not altered and no evidence of presence of inflammatory cells found. RSVP (Phytosome®) containing patches abled to give sustained therapeutic effect that may be useful in treating acute and chronic inflammation.     

Clobetasol propionate solid lipid nanoparticles cream for effective treatment of eczema: formulation and clinical implications

In the present study clobetasol propionate (Cp) was loaded as solid lipid nanoparticles (SLN), incorporated it in suitable cream base and evaluated in vitro and its performance clinically against equivalent marketed formulation. Cp was incorporated into SLN by high-pressure homogenization technique and characterized for mean particle size, surface morphology and per cent drug entrapment. Drug permeation and skin uptake studies from Cp creams were carried out in a validated Franz static diffusion cell across human cadaver skin (HCS). Sixteen chronic eczema patients were enrolled in a controlled double blind clinical trial. Optimized Cp-SLN was smooth and spherical under scanning electron microscopy; with average particle size of 177 nm and per cent drug entrapment of 92.05%. In vitro permeation studies revealed lower mean flux value and higher skin uptake of Cp from Cp-SLN cream compared to marketed drug cream. Both formulations were found to be responsive to manifestations of chronic eczema, while Cp-SLN cream prepared in this investigation registered significant improvement in therapeutic response (1.9 fold; inflammation, 1.2 fold; itching) in terms of per cent reduction in degree of inflammation and itching against marketed cream. Further clinical trials are required to ascertain the efficiency of the present formulation.