Unrestrained stochastic dynamics simulations of the UUCG tetraloop using an implicit solvation model.

Three unrestrained stochastic dynamics simulations have been carried out on the RNA hairpin GGAC[UUCG] GUCC, using the AMBER94 force field (Cornell et al., 1995. J. Am. Chem. Soc. 117:5179-5197) in MacroModel 5.5 (Mohamadi et al., 1990. J. Comp. Chem. 11:440-467) and either the GB/SA continuum solvation model (Still et al., 1990. J. Am. Chem. Soc. 112:6127-6129) or a linear distance-dependent dielectric (1/R) treatment. The linear distance-dependent treatment results in severe distortion of the nucleic acid structure, restriction of all hydroxyl dihedrals, and collapse of the counterion atmosphere over the course of a 5-ns simulation. An additional vacuum simulation without counterions shows somewhat improved behavior. In contrast, the two GB/SA simulations (1.149 and 3.060 ns in length) give average structures within 1.2 A of the initial NMR structure and in excellent agreement with results of an earlier explicit solvent simulation (Miller and Kollman, 1997. J. Mol. Biol. 270:436-450). In a 3-ns GB/SA simulation starting with the incorrect UUCG tetraloop structure (Cheong et al., 1990. Nature. 346:680-682), this loop conformation converts to the correct loop geometry (Allain and Varani, 1995. J. Mol. Biol. 250:333-353), suggesting enhanced sampling relative to the previous explicit solvent simulation. Thermodynamic effects of 2'-deoxyribose substitutions of loop nucleotides were experimentally determined and are found to correlate with the fraction of time the ribose 2'-OH is hydrogen bonded and the distribution of the hydroxyl dihedral is observed in the GB/SA simulations. The GB/SA simulations thus appear to faithfully represent structural features of the RNA without the computational expense of explicit solvent.     

Identification of the Serratia endonuclease dimer: structural basis and implications for catalysis.

The Serratia endonuclease is an extracellularly secreted enzyme capable of cleaving both single- and double-stranded forms of DNA and RNA. It is the first member of a large class of related and usually dimeric endonucleases for which a structure is known. Using X-ray crystallography, the structure of monomer of this enzyme was reported by us previously (Miller MD et al., 1994, Nature Struct Biol 1:461-468). We now confirm the dimeric nature of this enzyme through light-scattering experiments and identify the physiologic dimer interface through crystal packing analysis. This dimerization occurs through an isologous twofold interaction localized to the carboxy-terminal subdomain of the enzyme. The dimer is a prolate ellipsoid with dimensions 30 A x 35 A x 90 A. The dimer interface is flat and contains four salt links, several hydrogen bonds, and nonpolar interactions. Buried water is prominent in this interface and it includes an unusual "cubic" water cluster. The position of the two active sites in the dimer suggests that they can act independently in their cleavage of DNA, but have a geometrical advantage in attacking substrate relative to the monomer.     

Engineered intermonomeric disulfide bonds in the globular domain of Newcastle disease virus hemagglutinin-neuraminidase protein: implications for the mechanism of fusion promotion

The promotion of membrane fusion by Newcastle disease virus (NDV) requires an interaction between the viral hemagglutinin-neuraminidase (HN) and fusion (F) proteins, although the mechanism by which this interaction regulates fusion is not clear. The NDV HN protein exists as a tetramer composed of a pair of dimers. Based on X-ray crystallographic studies of the NDV HN globular domain (S. Crennell et al., Nat. Struct. Biol. 7:1068-1074, 2000), it was proposed that the protein undergoes a significant conformational change from an initial structure having minimal intermonomeric contacts to a structure with a much more extensive dimer interface. This conformational change was predicted to be integral to fusion promotion with the minimal interface form required to maintain F in its prefusion state until HN binds receptors. However, no evidence for such a conformational change exists for any other paramyxovirus attachment protein. To test the NDV model, we have engineered a pair of intermonomeric disulfide bonds across the dimer interface in the globular domain of an otherwise non-disulfide-linked NDV HN protein by the introduction of cysteine substitutions for residues T216 and D230. The disulfide-linked dimer is formed both intracellularly and in the absence of receptor binding and is efficiently expressed at the cell surface. The disulfide bonds preclude formation of the minimal interface form of the protein and yet enhance both receptor-binding activity at 37 degrees C and fusion promotion. These results confirm that neither the minimal interface form of HN nor the proposed drastic conformational change in the protein is required for fusion.     

The domain-swapped dimer of cyanovirin-N contains two sets of oligosaccharide binding sites in solution

The binding of high-mannose oligosaccharides to the domain-swapped dimeric form of the potent HIV-inactivating protein cyanovirin-N (CV-N) was investigated in solution by NMR, complementing recent structural studies by X-ray crystallography on similar complexes [J. Biol. Chem. 277 (2002) 34336]. The crystal structures of CV-N dimer complexed with Man-9 and hexamannoside revealed two carbohydrate binding sites on opposite ends of the molecule. No binding was observed at site 1, previously identified on the solution monomer of CV-N [Structure 9 (2001) 931; Shenoy et al., Chem. Biol. 9 (2002) 1109]. Here, we report the presence of four sugar binding sites on the CV-N dimer in solution, identified by chemical shift mapping with hexamannoside and nonamannoside, synthetic substructures of Man-9. Our results demonstrate that in solution the domain-swapped CV-N dimer, like the CV-N monomer, contains two types of sites that are available for carbohydrate binding, suggesting that the occlusion of the primary sites in the crystal is due to specific features of the solid state.     

Structural mechanisms of constitutive activation in the C5a receptors with mutations in the extracellular loops: molecular modeling study

Previously we demonstrated by random saturation mutagenesis a set of mutations in the extracellular (EC) loops that constitutively activate the C5a receptor (C5aR) (Klco et al., Nat Struct Mol Biol 2005;12:320-326; Klco et al., J Biol Chem 2006;281:12010-12019). In this study, molecular modeling revealed possible conformations for the extracellular loops of the C5a receptors with mutations in the EC2 loop or in the EC3 loop. Comparison of low-energy conformations of the EC loops defined two distinct clusters of conformations typical either for strongly constitutively active mutants of C5aR (the CAM cluster) or for nonconstitutively active mutants (the non-CAM cluster). In the CAM cluster, the EC3 loop was turned towards the transmembrane (TM) helical bundle and more closely interacted with EC2 than in the non-CAM cluster. This suggested a structural mechanism of constitutive activity where EC3 contacts EC2 leading to EC2 interactions with helix TM3, thus triggering movement of TM7 towards TM2 and TM3. The movement initiates rearrangement of the system of hydrogen bonds between TM2, TM3 and TM7 including formation of the hydrogen bond between the side chains of D82(2.50) in TM2 and N296(7.49) in TM7, which is crucial for formation of the activated states of the C5a receptors (Nikiforovich et al., Proteins: Struct Funct Gene 2011;79:787-802). Since the relative large length of EC3 in C5aR (13 residues) is comparable with those in many other members of rhodopsin family of GPCRs (13-19 residues), our findings might reflect general mechanisms of receptor constitutive activation. The very recent X-ray structure of the agonist-induced constitutively active mutant of rhodopsin (Standfuss et al., Nature 2011;471:656-660) is discussed in view of our modeling results.     

Conformational change coupling the dimerization and activation of KSHV protease

The mechanism of herpesviral protease activation upon dimerization was studied using two independent spectroscopic assays augmented by directed mutagenesis. Spectroscopic changes, attributable to dimer interface conformational plasticity, were observed upon dimerization of Kaposi's sarcoma-associated herpesvirus protease (KSHV Pr). KSHV Pr's dissociation constant of 585 +/- 135 nM at 37 degrees C was measured by a concentration-dependent, 100-fold increase in specific activity to a value of 0.275 +/- 0.023 microM product min(-1) (microM enzyme)(-1). A 4 nm blue-shifted fluorescence emission spectrum and a 25% increase in ellipticity at 222 nm were detected by circular dichroism upon dimer association. This suggested enhanced hydrophobic packing within the dimer interface and/or core, as well as altered secondary structures. To better understand the structure-activity relationship between the monomer and the dimer, KSHV Pr molecules were engineered to remain monomeric via substitution of two separate residues within the dimer interface, L196 and M197. These mutants were proteolytically inactive while exhibiting the spectroscopic signature and thermal stability of wild type, dissociated monomers (T(M) = 75 degrees C). KSHV Pr conformational changes were found to be relevant in vivo, as the autoproteolytic inactivation of KSHV Pr at its dimer disruption site [Pray et al. (1999) J. Mol. Biol. 289, 197-203] was detected in viral particles from KSHV-infected cells. This characterization of structural plasticity suggests that the structure of the KSHV Pr monomer is stable and significantly different from its structure in the dimer. This structural uniqueness should be considered in the development of compounds targeting the dimer interface of KSHV Pr monomers.     

Structural characterization of the interaction of the delta and alpha subunits of the Escherichia coli F1F0-ATP synthase by NMR spectroscopy

A critical point of interaction between F(1) and F(0) in the bacterial F(1)F(0)-ATP synthase is formed by the alpha and delta subunits. Previous work has shown that the N-terminal domain (residues 3-105) of the delta subunit forms a 6 alpha-helix bundle [Wilkens, S., Dunn, S. D., Chandler, J., Dahlquist, F. W., and Capaldi, R. A. (1997) Nat. Struct. Biol. 4, 198-201] and that the majority of the binding energy between delta and F(1) is provided by the interaction between the N-terminal 22 residues of the alpha- and N-terminal domain of the delta subunit [Weber, J., Muharemagic, A., Wilke-Mounts, S., and Senior, A. E. (2003) J. Biol. Chem. 278, 13623-13626]. We have now analyzed a 1:1 complex of the delta-subunit N-terminal domain and a peptide comprising the N-terminal 22 residues of the alpha subunit by heteronuclear protein NMR spectroscopy. A comparison of the chemical-shift values of delta-subunit residues with and without alpha N-terminal peptide bound indicates that the binding interface on the N-terminal domain of the delta subunit is formed by alpha helices I and V. NOE cross-peak patterns in 2D (12)C/(12)C-filtered NOESY spectra of the (13)C-labeled delta-subunit N-terminal domain in complex with unlabeled peptide verify that residues 8-18 in the alpha-subunit N-terminal peptide are folded as an alpha helix when bound to delta N-terminal domain. On the basis of intermolecular contacts observed in (12)C/(13)C-filtered NOESY experiments, we describe structural details of the interaction of the delta-subunit N-terminal domain with the alpha-subunit N-terminal alpha helix.     

Thermodynamic and kinetic characterization of a beta-hairpin peptide in solution: an extended phase space sampling by molecular dynamics simulations in explicit water

The folding of the amyloidogenic H1 peptide MKHMAGAAAAGAVV taken from the syrian hamster prion protein is explored in explicit aqueous solution at 300 K using long time scale all-atom molecular dynamics simulations for a total simulation time of 1.1 mus. The system, initially modeled as an alpha-helix, preferentially adopts a beta-hairpin structure and several unfolding/refolding events are observed, yielding a very short average beta-hairpin folding time of approximately 200 ns. The long time scale accessed by our simulations and the reversibility of the folding allow to properly explore the configurational space of the peptide in solution. The free energy profile, as a function of the principal components (essential eigenvectors) of motion, describing the main conformational transitions, shows the characteristic features of a funneled landscape, with a downhill surface toward the beta-hairpin folded basin. However, the analysis of the peptide thermodynamic stability, reveals that the beta-hairpin in solution is rather unstable. These results are in good agreement with several experimental evidences, according to which the isolated H1 peptide adopts very rapidly in water beta-sheet structure, leading to amyloid fibril precipitates [Nguyen et al., Biochemistry 1995;34:4186-4192; Inouye et al., J Struct Biol 1998;122:247-255]. Moreover, in this article we also characterize the diffusion behavior in conformational space, investigating its relations with folding/unfolding conditions.     

Double mutation at the subunit interface of glutathione transferase rGSTM1-1 results in a stable, folded monomer

Canonical glutathione (GSH) transferases are dimeric proteins with subunits composed of an N-terminal GSH binding region (domain 1) and a C-terminal helical region (domain 2). The stabilities of several GSH transferase dimers are dependent upon two groups of interactions between domains 1 and 2 of opposing subunits: a hydrophobic ball-and-socket motif and a buried charge cluster motif. In rGSTM1-1, these motifs involve residues F56 and R81, respectively. The structural basis for the effects of mutating F56 to different residues on dimer stability and function has been reported (Codreanu et al. (2005) Biochemistry 44, 10605-10612). Here, we show that the simultaneous disruption of both motifs in the F56S/R81A mutant causes complete dissociation of the dimer to a monomeric protein on the basis of gel filtration chromatography and multiple-angle laser light scattering. The fluorescence and far-UV CD properties of the double mutant as well as the kinetics of amide H/D exchange along the polypeptide backbone suggest that the monomer has a globular structure that is similar to a single subunit in the native protein. However, the mutant monomer has severely impaired catalytic activity, suggesting that the dimer interface is vital for efficient catalysis. Backbone amide H/D exchange kinetics in the F56S and F56S/R81A mutants indicate that a reorganization of the loop structure between helix alpha2 and strand beta3 near the active site is responsible for the decreased catalytic activity of the monomer. In addition, the junction between the alpha4 and alpha5 helices in F56S/R81R shows decreased H/D exchange, indicating another structural change that may affect catalysis. Although the native subunit interface is important for dimer stability, urea-induced unfolding of the F56S/R81A mutant suggests that the interface is not essential for the thermodynamic stability of individual subunits. The H/D exchange data reveal a possible molecular basis for the folding cooperativity observed between domains 1 and 2.     

Differential scanning calorimetric studies of E. coli aspartate transcarbamylase. III. The denaturational thermodynamics of the holoenzyme with single-site mutations in the catalytic chain

Aspartate transcarbamylase (EC 2.1.3.2) from E. coli is a multimeric enzyme consisting of two catalytic subunits and three regulatory subunits whose activity is regulated by subunit interactions. Differential scanning calorimetric (DSC) scans of the wild-type enzyme consist of two peaks, each comprised of at least two components, corresponding to denaturation of the catalytic and regulatory subunits within the intact holoenzyme (Vickers et al., J. Biol. Chem. 253 (1978) 8493; Edge et al., Biochemistry 27 (1988) 8081). We have examined the effects of nine single-site mutations in the catalytic chains. Three of the mutations (Asp-100-Gly, Glu-86-Gln, and Arg-269-Gly) are at sites at the C1: C2 interface between c chains within the catalytic subunit. These mutations disrupt salt linkages present in both the T and R states of the molecule (Honzatko et al., J. Mol. Biol. 160 (1982) 219; Krause et al., J. Mol. Biol. 193 (1987) 527). The remainder (Lys-164-Ile, Tyr-165-Phe, Glu-239-Gln, Glu-239-Ala, Tyr-240-Phe and Asp-271-Ser) are at the C1: C4 interface between catalytic subunits and are involved in interactions which stabilize either the T or R state. DSC scans of all of the mutants except Asp-100-Gly and Arg-269-Gly consisted of two peaks. At intermediate concentrations, Asp-100-Gly and Arg-269-Gly had only a single peak near the Tm of the regulatory subunit transition in the holoenzyme, although their denaturational profiles were more complex at high and low protein concentrations. The catalytic subunits of Glu-86-Gln, Lys-164-Ile and Asp-271-Ser appear to be significantly destabilized relative to wild-type protein while Tyr-165-Phe and Tyr-240-Phe appear to be stabilized. Values of delta delta G degree cr, the difference between the subunit interaction energy of wild-type and mutant proteins, evaluated as suggested by Brandts et al. (Biochemistry 28 (1989) 8588) range from -3.7 kcal mol-1 for Glu-86-Gln to 2.4 kcal mol-1 for Tyr-165-Phe.     

Structure and function of mutationally generated monomers of dimeric phosphoribosylanthranilate isomerase from Thermotoga maritima

BACKGROUND: Oligomeric proteins may have been selected for in hyperthermophiles because subunit association provides extra stabilization. Phosphoribosylanthranilate isomerase (PRAI) is monomeric and labile in most mesophilic microorganisms, but dimeric and stable in the hyperthermophile Thermotoga maritima (tPRAI). The two subunits of tPRAI are associated back-to-back and are locked together by a hydrophobic loop. The hypothesis that dimerization is important for thermostability has been tested by rationally designing monomeric variants of tPRAI. RESULTS: The comparison of tPRAI and PRAI from Escherichia coli (ePRAI) suggested that levelling the nonplanar dimer interface would weaken the association. The deletion of two residues in the loop loosened the dimer. Subsequent filling of the adjacent pocket and the exchange of polar for apolar residues yielded a weakly associating and a nonassociating monomeric variant. Both variants are as active as the parental dimer but far more thermolabile. The thermostability of the weakly associating monomer increased significantly with increasing protein concentration. The X-ray structure of the nonassociating monomer differed from that of the parental subunit only in the restructured interface. The orientation of the original subunits was maintained in a crystal contact between two monomers. CONCLUSIONS: tPRAI is dimeric for reasons of stability. The clearly separated responsibilities of the betaalpha loops, which are involved in activity, and the alphabeta loops, which are involved in protein stability, has permitted the evolution of dimers without compromising their activity. The preserved interaction in the crystal contacts suggests the most likely model for dimer evolution.     

ATP-mediated changes in cross-subunit interactions in the RecA protein

RecA protein undergoes ATP- and DNA-induced conformational changes that result in different helical parameters for free protein filaments versus RecA/ATP/DNA nucleoprotein filaments. Previous mutational studies of a particular region of the RecA oligomeric interface suggested that cross-subunit contacts made by residues K6 and R28 were more important for stabilization of free protein oligomers than nucleoprotein filaments [Eldin, S., et al. (2000) J. Mol. Biol. 299, 91-101]. Using mutant proteins with specifically engineered Cys substitutions, we show here that the efficiency of cross-subunit disulfide bond formation at certain positions in this region changes in the presence of ATP or ATP/DNA. Our results support the idea that specific cross-subunit interactions that occur within this region of the subunit interface are different in free RecA protein versus RecA/ATP/DNA nucleoprotein filaments.     

Intersubunit proximity of residues in the RecA protein as shown by engineered disulfide cross-links.

Mutational studies of regions that make up the oligomeric interface within the RecA protein filament structure have shown that F217 is an important determinant of RecA function and oligomer stability. All substitutions, other than Tyr and Cys, completely inhibit RecA activities and exhibit a substantial decrease in protein filament stability [Skiba, M. C., and Knight, K. L. (1994) J. Biol. Chem. 269, 3823-3828; Logan, K. M., et al. (1997) J. Mol. Biol. 266, 306-316]. Although the RecA crystal structure exhibits no obvious constraints that explain this mutational stringency, the structure does reveal a hydrophobic pocket in the neighboring monomer that may accommodate the F217 side chain. Together with the F217C mutation, we have introduced a series of Cys substitutions within the interacting surface on the neighboring monomer and have tested for disulfide formation under various conditions, e.g., with or without ATP and ssDNA. We show that the location of F217 in the crystal structure is in general agreement with its position in the catalytically active RecA-ATP-DNA complex. Functional studies with the mutant proteins support the idea that ATP-induced movement of the wild-type F217 side chain toward this hydrophobic pocket is important in mediating allosteric changes in the RecA protein structure.     

NMR analysis of the monomeric form of a mutant unliganded bovine neurophysin: comparison with the crystal structure of a neurophysin dimer

Determination of the structure of the unliganded monomeric state of neurophysin is central to an understanding of the allosteric relationship between neurophysin peptide-binding and dimerization. We examined this state by NMR, using the weakly dimerizing H80E mutant of bovine neurophysin-I. The derived structure, to which more than one conformer appeared to contribute, was compared with the crystal structure of the unliganded des 1-6 bovine neurophysin-II dimer. Significant conformational differences between the two proteins were evident in the orientation of the 3,10 helix, in the 50-58 loop, in beta-turns, and in specific intrachain contacts between amino- and carboxyl domains. However, both had similar secondary structures, in independent confirmation of earlier circular dichroism studies. Previously suggested interactions between the amino terminus and the 50-58 loop in the monomer were also confirmed. Comparison of the observed differences between the two proteins with demonstrated effects of dimerization on the NMR spectrum of bovine neurophysin-I, and preliminary investigation of the effects of dimerization on H80E spectra, allowed tentative distinction between the contributions of sequence and self-association differences to the difference in conformation. Regions altered by dimerization encompass most binding site residues, providing a potential explanation of differences in binding affinity between the unliganded monomeric and dimeric states. Differences between monomer and dimer states in turns, interdomain contacts, and within the interdomain segment of the 50-58 loop suggest that the effects of dimerization on intrasubunit conformation reflect the need to adjust the relative positions of the interface segments of the two domains for optimal interaction with the adjacent subunit and/or reflect the dual role of some residues as participants both at the interface and in interdomain contacts.     

Control of nitric oxide synthase dimer assembly by a heme-NO-dependent mechanism

Homodimer formation is a key step that follows heme incorporation during assembly of an active inducible nitric oxide synthase (iNOS). In cells, heme incorporation into iNOS becomes limited due to interaction between self-generated NO and cellular heme [Albakri, Q., and Stuehr, D. J. (1996) J. Biol. Chem. 271, 5414-5421]. Here we investigated if NO can regulate at points downstream in the process by inhibiting dimerization of heme-containing iNOS monomer. Heme-containing monomers were generated by treating iNOS dimer or iNOS oxygenase domain dimer (iNOSoxy) with urea. Both monomers dimerized when incubated with Arg and 6R-tetrahydrobiopterin (H4B), as shown previously [Abu-Soud, H. M., Loftus, M., and Stuehr, D. J. (1995) Biochemistry 34, 11167-11175]. The NO-releasing drug S-nitrosyl-N-acetyl-D,L-penicillamine (SNAP; 0-0.5 mM) inhibited dimerization of iNOS monomer in a dose- and time-dependent manner, without causing heme release. SNAP-pretreated monomer also did not dimerize in response to H4B plus Arg. SNAP converted Arg- and H4B-free iNOS dimer into monomer that could not redimerize, but had no effect on iNOS dimer preincubated with Arg and H4B. Anaerobic spectral analysis showed that NO from SNAP bound to the ferric heme of iNOSoxy monomer or dimer. Adding imidazole as an alternative heme ligand prevented SNAP from inhibiting iNOS monomer dimerization. We conclude that NO and related species can block iNOS dimerization at points downstream from heme incorporation. The damage to heme-containing monomer results from a reaction with the protein and appears irreversible. Although dimeric structure alone does not protect, it does enable Arg and H4B to bind and protect. Inhibition appears mediated by NO coordinating to the ferric heme iron of the monomer.     

X-interface is not the explanation for the slow disassembly of N-cadherin dimers in the apo state

In spite of structural similarities Epithelial- (E-) and Neural- (N-) cadherins are expressed at two types of synapses and differ significantly in dimer disassembly kinetics. Recent studies suggested that the formation of an X-dimer intermediate in E-cadherin is the key requirement for rapid disassembly of the adhesive dimer (Harrison et al., Nat Struct Mol Biol 2010;17:348-357 and Hong et al., J Cell Biol 2011;192:1073-1083). The X-interface in E-cadherin involves three noncovalent interactions, none of which is conserved in N-cadherin. Dimer disassembly is slow at low calcium concentration in N-cadherin, which may be due to the differences in the X-interface residues. To investigate the origin of the slow disassembly kinetics we introduced three point mutations into N-cadherin to provide the opportunity for the formation of X-interface interactions. Spectroscopic studies showed that the triple mutation did not affect the stability or the calcium-binding affinity of the X-enabled N-cadherin mutant. Analytical size exclusion chromatography was used to assay for the effect of the mutation on the rate of dimer disassembly. Contrary to our expectation, the disassembly of dimers of the X-enabled N-cadherin mutant was as slow as seen for wild-type N-cadherin in the apo-state. Thus, the differences in the X-interface residues are not the origin of slow disassembly kinetics of N-cadherin in the apo-state.     

Comparison of backbone dynamics of monomeric and domain-swapped stefin A

Three-dimensional domain swapping has been observed in increasing number of proteins and has been implicated in the initial stages of protein aggregation, including that of the cystatins. Stefin A folds as a monomer under native conditions, while under some denaturing conditions domain-swapped dimer is formed. We have determined the backbone dynamics of the monomeric and domain-swapped dimeric forms of stefin A by (15)N relaxation using a model-free approach. The overall correlation times of the molecules were determined to be 4.6 +/- 0.1 ns and 9.2 +/- 0.2 ns for the monomer and the dimer, respectively. In the monomer, decreased order parameters indicate an increased mobility for the N-terminal trunk, the first and the second binding loops. At the opposite side of the molecule, the loop connecting the alpha-helix with strand B, the beginning of strand B and the loop connecting strands C and D show increased localized mobility. In the domain-swapped dimer, a distinctive feature of the structure is the concatenation of strands B and C into a single long beta-strand. The newly formed linker region between strands B and C, which substitutes for the first binding loop in the monomer, has order parameters typical for the remainder of the beta-strands. Thus, the interaction between subunits that occurs on domain-swapping has consequences for the dynamics of the protein at long-range from the site of conformational change, where an increased rigidity in the newly formed linker region is accompanied by an increased mobility of loops remote from that site.