Plasmid transformation of Mycoplasma mycoides subspecies mycoides is promoted by high concentrations of polyethylene glycol.

The recent isolation and characterization of two plasmids from Mycoplasma mycoides subspecies mycoides has opened up new possibilities for studying mycoplasmal genetics. In order to facilitate the development of a genetic system in M. mycoides subsp. mycoides, parameters of polyethylene glycol (PEG)-mediated transformation were examined, as existing protocols prove very inefficient in this organism. The effects of PEG concentration, DNA concentration, presence of Ca2+ ions, and choice of buffers on the transformation of the Tn916-containing plasmid pAM120 into M. mycoides subsp. mycoides were examined. The stability of Tn916 in the M. mycoides subsp. mycoides chromosome was also evaluated. The optimal PEG concentration (53-62% (w/v)) in the transformation mixture was substantially higher than the PEG concentration reported to be optimal for transformation of other mycoplasmas (36% (w/v)). The PEG concentrations used here were also higher than the concentration used to promote transformation or fusion of gram-positive bacterial protoplasts. A necessity for the presence of Ca2+ ions for optimal transformation was shown, as was the possible involvement of cell culture growth stage. Our results demonstrate the need for expanding current transformation techniques for mycoplasmas. Studies also indicate that once Tn916 inserts into the M. mycoides subsp. mycoides chromosome, it can transpose to other sites at a relatively high frequency.     

Alpha-amylase assay with dyed-starch in polyethylene glycol and dextran solutions

Summary The -amylase assay method with RBB-starch was shown to work well in the presence of polyethylene glycol and dextran, polymers commonly used in aqueous two-phase systems. Neither the polymer type, polymer concentration, nor molecular weight affected the -amylase activity measurement. On the other hand, the same polymers significantly interfered with the Nelson copper method, the DNS method, and the iodine-starch method.     

Stimulation of intermolecular ligation with E. coli DNA ligase by high concentrations of monovalent cations in polyethylene glycol solutions.

In the presence of high concentrations of the nonspecific polymer polyethylene glycol (PEG), intermolecular cohesive-end ligation with the DNA ligase from Escherichia coli was stimulated by high salt concentrations: 200 mM NaCl or 300 mM KCl in 10% (w/v) PEG 6000 solutions, and 100-200 mM NaCl or 150-300 mM KCl in 15% PEG 6000 solutions. Intermolecular blunt-end ligation with this ligase was also stimulated at 100-150 mM NaCl or 150-250 mM KCl in 15% PEG 6000 solutions. The extent of such intermolecular ligation increased and the salt concentrations at which ligation was stimulated extended to lower concentrations when we raised the temperature from 10 to 37 degrees C.     

Purification and characterization of polyethylene glycol dehydrogenase involved in the bacterial metabolism of polyethylene glycol.

Polyethylene glycol (PEG) dehydrogenase in crude extracts of a PEG 20,000-utilizing mixed culture was purified 24 times by precipitation with ammonium sulfate, solubilization with laurylbetaine, and chromatography with diethylamino-ethyl-cellulose, hydroxylapatite, and Sephadex G-200. The purified enzyme was confirmed to be homogeneous by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The molecular weight of the enzyme, which appeared to consist of four identical subunits, was 2.4 X 10(5). The enzyme was stable below 35 degrees C and in the pH range of 7.5 to 9.0. The optimum pH and temperature of the activity were around 8.0 and 60 degrees C, respectively. The enzyme did not require any metal ions for activity and oxidized various kinds of PEGs, among which PEG 6,000 was the most active substrate. The apparent Km values for tetraethylene glycol and PEG 6,000 were about 10.0 and 3.0 mM, respectively.     

Arginine-specific modification of proteins with polyethylene glycol

In this study, the residue-selective modification of proteins with polymers at arginine residues is reported. The difficulty in modifying arginine residues lies in the fact that they are less reactive than lysine residues. Consequently, typical chemo-selective reactions which employ "kinetic" selectivity (active esters, Michael addition, etc.) cannot be used to target these residues. The chemistry exploited herein relies on "thermodynamic" selectivity to achieve selective modification of arginine residues. ω-Methoxy poly(ethylene glycol) bearing an α-oxo-aldehyde group was synthesized and used to demonstrate the selective modification of lysozyme at arginine residues. In addition, the optimization of reaction conditions for coupling as well as the stability of the formed adduct toward dilution, toward a nucleophilic buffer, and toward acidification are reported. It was concluded that this approach is a convenient, mild, selective, and catalyst-free method for protein modification.     

Precipitation of proteins with polyethylene glycol: characterization of albumin.

Phosphomannose isomerase (d-mannose 6-phosphate ketol-isomerase) (EC 5.3.1.8) has been shown to use the predicted β-d-fructose 6-phosphate as substrate. The fate of α-d-fructose 6-phosphate is not determined by these experiments. β-d-Mannose 6-phosphate is not anomerized to α-d-mannose 6-phosphate by this enzyme.     

A new dimension in suspension fusion techniques with polyethylene glycol.

Polyethylene glycol (PEG) induces the hybridization of mammalian cells at a much higher frequency when the cells are attached to a substrate during treatment than when the cells are treated in suspension. Since many cell types, e.g., lymphocytes, cannot attach to a substrate, a new technique for the PEG-induced fusion of cells in suspension was developed. This technique, referred to as "pancake fusion," is based on the centrifugation of suspended cells onto a coverslip and the PEG treatment of the cells on the coverslip as if they were attached to a substrate. With this technique, the frequency of hybridization of human white blood cells, which are incapable of attaching to a substrate, can be greatly increased.     

Radioprotective effect of polyethylene glycol

Polyethylene glycol of molecular weight 400 (PEG-400) had a radioprotective effect of about 20% against lethality when given ip 20 min prior to single or fractionated X-ray doses to the head and neck. Dose modification factors (DMF) based on LD50/15 values ranged from 1.14 to 1.24. A similar DMF of 1.12 based on LD50/30 values was obtained using single doses of whole-body X irradiation. Mice given head and neck irradiation had significantly reduced rectal temperatures (31.3 +/- 3.0 degrees C) 9 days post irradiation compared with unirradiated controls (35.4 +/- 0.6 degrees C). No such reduction was observed when PEG-400 was given with radiation (36.3 +/- 0.9 degrees C). PEG-400 also lessened, but not significantly, the frequency of shivering in irradiated animals. Histopathologic examination of the oral structures demonstrated only marginal protection by PEG-400. Estimation of the alpha/beta ratio from LD50 data on head and neck-irradiated mice yielded values of 4.4 +/- 1.9 (95% confidence limits) Gy without PEG-400 and 7.9 +/- 1.4 Gy with PEG-400. Since it is a non-thiol radioprotector, PEG-400 may be more useful when combined with more conventional thiol-containing radioprotectors.     

Antifungal activities of recombinant antifungal protein by conjugation with polyethylene glycol.

Tenecin 3, an antifungal protein isolated from coleopteran insect Tenebrio molitor larvae, inhibited growth of the fungus Candida albicans. We have previously reported that tenecin 3 has a propensity of random structure with very loose turn-like elements by circular dichroism (CD) analysis and 2D nuclear overhauser effect spectroscopy [Lee et al. (1999)]. However, the antifungal mechanism of tenecin-3 has not yet been studied due to its very low availability from natural sources. As an initial step to study the antifungal mechanism of tenecin 3, recombinant tenecin 3 (RT-3) obtained from an expression system in Escherichia coli showed antifungal activity against C. albicans as did natural tenecin 3. To elucidate the antifungal mechanism of RT-3 and to explore the possibility of preparing polyethylene glycol (PEG) conjugated derivative, we synthesized PEG conjugated RT-3 (RT-3-PEG) and examined its antifungal activity against C. albicans in vitro. RT-3-PEG showed greater antifungal activity against C. albicans than RT-3 alone at the same dose. When C. albicans was treated with RT-3-PEG in vitro, K+ in the C. albicans cell was leaked out rapidly compared to the C. albicans treated with RT-3 alone. When the morphological change of RT-3-PEG treated C. albicans was examined by scanning electron microscopy, string-like substances, which may have been derived from the fungus, were stacked around the cell whose wall was damaged. Also, no appreciable hemolysis of mouse erythrocytes was detected under conditions in which 1% melittin caused 100% hemolysis. These results suggested that the RT-3-PEG derivative probably does not interact with mammalian cell appreciably, although it has antifungal activity.     

Purification and characterization of polyethylene glycol dehydrogenase involved in the bacterial metabolism of polyethylene glycol

Polyethylene glycol (PEG) dehydrogenase in crude extracts of a PEG 20,000-utilizing mixed culture was purified 24 times by precipitation with ammonium sulfate, solubilization with laurylbetaine, and chromatography with diethylamino-ethyl-cellulose, hydroxylapatite, and Sephadex G-200. The purified enzyme was confirmed to be homogeneous by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The molecular weight of the enzyme, which appeared to consist of four identical subunits, was 2.4 X 10(5). The enzyme was stable below 35 degrees C and in the pH range of 7.5 to 9.0. The optimum pH and temperature of the activity were around 8.0 and 60 degrees C, respectively. The enzyme did not require any metal ions for activity and oxidized various kinds of PEGs, among which PEG 6,000 was the most active substrate. The apparent Km values for tetraethylene glycol and PEG 6,000 were about 10.0 and 3.0 mM, respectively.     

Water potential of aqueous polyethylene glycol

Water potential (Ψω) values were determined for aqueous colloids of four molecular sizes of polyethylene glycol (PEG) using freezing-point depression and vapor-pressure deficit methods. A significant third-order interaction exists between the method used to determine Ψω, PEG molecular size, and concentration. At low PEG concentrations, freezing-point depression measurements result in higher (less negative) values for Ψω than do vapor-pressure deficit measurements. The reverse is true at high concentrations. PEG in water does not behave according to van't Hoff's law. Ψω is related to molality for a given PEG but not linearly. Moreover, Ψω varies with the molecular size of the PEG. It is suggested that the Ψω of PEG in water may be controlled primarily by the matric forces of ethylene oxide subunits of the PEG polymer. The term matricum is proposed for PEG in soil-plant-water relation studies.     

A theory for the displacement of proteins and viruses with polyethylene glycol.

The displacement action of polyethylene glycol of different molecular weights may be linked to the ability of the polymers to form coiled particles in solution. From conclusions drawn from their sedimentating properties in centrifugal fields the polyethylene glycols of low molecular weights, as expected, are less randomly coiled than those of higher molecular weight. It is suggested that protein molecules have the ability to diffuse into the coils of the polyethylene glycol from which they are excluded when the random coiling increases with increasing polymer concentration. From considerations based on the interaction of the polymer filament with the displaced particle the distribution of the substance between the coils and the intermolecular spaces may be predicted semi-quantitatively.