Application of semi-industrial monolithic columns for downstream processing of clotting factor IX

It has been shown in a previous study that monolithic columns can be used for downstream processing of different concentrates of clotting factor IX [K. Branovi? et al., J. Chromatogr. A 903 (2000) 21]. This paper demonstrates that such supports are useful tools also at an early stage of the purification process of factor IX from human plasma. Starting with the eluate after solid-phase extraction with DEAE-Sephadex, the use of monolithic columns has allowed much better purification than that achieved with conventional anion-exchange supports. The period of time required for separation is also much reduced. In up-scaling experiments, separations are carried out with 8, 80 and 500 ml columns. A volume of 1830 ml of DEAE-Sephadex eluate, containing a total of 27.6 g of protein and 48500 IU of factor IX is applied to the 500 ml monolithic column. This corresponds to a separation on a pilot scale. The results of this separation after up-scaling are comparable to those obtained with the 8 ml column on a laboratory scale.     

Determination of antisense phosphorothioate oligonucleotides and catabolites in biological fluids and tissue extracts using anion-exchange high-performance liquid chromatography and capillary gel electrophoresis

Chemically modified phosphorothioate oligodeoxynucleotides (ODNs) have become critical tools for research in the fields of gene expression and experimental therapeutics. Bioanalytical assays were developed that utilized fast anion-exchange high-performance liquid chromatography (HPLC) and capillary gel electrophoresis (CGE) for the determination of 20-mer ODNs in biological fluids (plasma and urine) and tissues. A 20 mer ODN in the antisense orientation directed against DNA methyltransferase (denoted as MT-AS) was studied as the model ODN. The anion-exchange HPLC method employed a short column packed with non-porous polymer support and a ternary gradient elution with 2 M lithium bromide containing 30% formamide. Analysis of the MT-AS is accomplished within 5 min with a detection limit of approximately 3 ng on-column at 267 nm. For plasma and urine, samples were diluted with Nonidet P-40 in 0.9% NaCl and directly injected onto the column, resulting in 100% recovery. For tissue homogenates, a protein kinase K digestion and phenol–chloroform extraction were used, with an average recovery of about 50%. Since the HPLC assay cannot provide one-base separation, biological samples were also processed by an anion-exchange solid-phase extraction and a CGE method to characterize MT-AS and its catabolites of 15–20-mer, species most relevant to biological activity. One base separation, under an electric field of 400 V/cm at room temperature, was achieved for a mixture of 15–20-mer with about 50 pg injected. Assay validation studies revealed that the combined HPLC–CGE methods are accurate, reproducible and specific for the determination of MT-AS and its catabolites in biological fluids and tissue homogenates, and can be used for the pharmacokinetic characterization of MT-AS.     

Direct cocktail analysis of drug discovery compounds in pooled plasma samples using liquid chromatography-tandem mass spectrometry

Direct plasma injection technology coupled with a LC-MS/MS assay provides fast and straightforward method development and greatly reduces the time for the tedious sample preparation procedures. In this work, a simple and sensitive bioanalytical method based on direct plasma injection using a single column high-performance liquid chromatography (HPLC) and tandem mass spectrometry (MS/MS) was developed for direct cocktail analysis of double-pooled mouse plasma samples for the quantitative determination of small molecules. The overall goal was to improve the throughput of the rapid pharmacokinetic (PK) screening process for early drug discovery candidates. Each pooled plasma sample was diluted with working solution containing internal standard and then directly injected into a polymer-coated mixed-function column for sample clean-up, enrichment and chromatographic separation. The apparent on-column recovery of six drug candidates in mouse plasma samples was greater than 90%. The single HPLC column was linked to either an atmospheric pressure chemical ionization (APCI) or electrospray ionization (ESI) source as a part of MS/MS system. The total run cycle time using single column direct injection methods can be achieved within 4 min per sample. The analytical results obtained by the described direct injection methods were comparable with those obtained by semi-automated protein precipitation methods within +/- 15%. The advantages and challenges of using direct single column LC-MS/MS methods with two ionization sources in combination of sample pooling technique are discussed.     

On-line clean-up and screening of oxacillin and cloxacillin in human urine and plasma with a weak ion exchange monolithic column

A weak ion exchange monolithic column prepared by modifying the GMA-MAA-EDMA (glycidyl methacrylate-methacrylic acid-ethylene glycol dimethacrylate) monoliths with ethylenediamine was applied to remove matrix compounds in biological fluid. Using this monolithic column, on-line clean-up and screening of oxacillin and cloxacillin in human urine and plasma samples had been investigated. Chromatography was performed by reversed-phase HPLC on a C(18) column with ultraviolet detection at 225 nm. Results showed that the ion exchange monolithic column could be used for deproteinization and retaining oxacillin and cloxacillin in human urine and plasma, which provided a simple and fast method for assaying drugs in human urine and plasma.     

Quantitation of daunorubicin and its metabolites by high-performance liquid chromatography with electrochemical detection

A selective and sensitive high-performance liquid chromatographic method was developed for the separation and quantitation of daunorubicin and its metabolites in serum, plasma, and other biological fluids. Daunorubicin and metabolites in human plasma were injected directly into the high-performance liquid chromatography system via a loop-column to pre-extract the drugs from the plasma, and quantitated against a multilevel calibration curve with adriamycin as the internal standard. The column effluent was monitored with an electrochemical detector at an applied oxidative potential of 0.65 V and by fluorescence. Daunorubicin and four metabolites were separted and characterized by this method. In a blinded evaluation of accuracy and precision, the mean coefficients of variation were 3.8, 3.6 and 9.8% at concentrations of 150, 75 and 15 ng/ml, respectively, and blank samples gave negligible readings. The amperometric sensitivity was greater than achieved by fluorescence detection, and offers an alternative method for quantitation of these compounds. The new method has a limit of detection of less than 2 ng on column, allowing quantitation of < 10 ng/ml in plasma samples without organic extraction prior to chromatographic analysis.     

High-throughput liquid chromatography-tandem mass spectrometry determination of bupropion and its metabolites in human, mouse and rat plasma using a monolithic column

In the present work, a high-throughput LC/MS/MS method using a Chromolith RP-18 (50 mm x 4.6 mm) monolithic column was developed and partially validated for the determination of bupropion (BUP), an anti-depressant drug, and its metabolites, hydroxybupropion and threo-hydrobupropion (TB), in human, mouse, and rat plasma. A modern integrated liquid chromatograph and an LC/MS/MS system with a TurboIonSpray (TIS) interface were used for the positive electrospray selected reaction monitoring (SRM) LC/MS analyses. Spiked control plasma calibration standards and quality control (QC) samples were extracted by semi-automated 96-well liquid-liquid extraction (LLE) using ethyl acetate. A mobile phase consisting of 8mM ammonium acetate-acetonitrile (55:45, v/v) delivered isocratically at 5 ml/min, and split post-column to 2 ml/min directed to the TIS, provided the optimum conditions for the chromatographic separation of bupropion and its metabolites within 23s. The isotope-labeled D(6)-bupropion and D(6)-hydroxybupropion were used as internal standards. The method was linear over a concentration range of 0.25-200 ng/ml (bupropion and threo-hydrobupropion), and 1.25-1000 ng/ml (hydroxybupropion). The intra- and inter-day assay accuracy and precision were within 15% for all analytes in each of the biological matrices. The monolithic column performance as a function of column backpressure, peak asymmetry, and retention time reproducibility was adequately maintained over 864 extracted plasma injections.     

Fast and reliable determination of the antifungal drug voriconazole in plasma using monolithic silica rod liquid chromatography

In the present study, we developed a fast and reliable HPLC assay for the determination of the new triazole antifungal agent voriconazole in plasma, using a Chromolith RP 18e (100 mm x 4.6 mm) monolithic silica rod HPLC column. After liquid-liquid extraction, plasma samples were separated with a mobile phase consisting of ammoniumdihydrogencarbonate buffer (pH 5.8)-acetonitrile-tetrahydrofuran (72:25:3) at a flow-rate of 3.5 mL/min and UV detection at 255 nm. The retention times for voriconazole and internal standard (UK-115794) were 2.3 and 2.7 min, respectively, and total run time was 4 min. The calibration curves were linear between 0.05 and 10 microg/mL, and within-assay and between-assay coefficients of variation were <4%. The proposed assay for voriconazole in plasma is fast, sensitive and reliable, and, thus, well suited for routine therapeutic monitoring of patients and for pharmacokinetic studies. It can be predicted that the use of monolithic silica rod chromatography will substantially shorten the turn-around time in the therapeutic drug monitoring laboratory.     

A new fast method for nanoLC-MALDI-TOF/TOF-MS analysis using monolithic columns for peptide preconcentration and separation in proteomic studies

A new fast method for identification and characterization of proteolytic digests of proteins by monolithic liquid chromatography coupled with mass spectrometry has been developed. The advantages of the monolithic columns are a high-pressure stability and low back pressure resulting in higher flow rates for capillary or nanosize columns simplifying the system handling. As was shown in several publications, such monolithic stationary phases are highly qualified for the analysis of peptides and proteins, but so far, only small volumes could be injected into the system, which might hamper the sample preparation leading to protein precipitation and partial loss of sample. To overcome the problem of small injection volumes, we established a system including a short monolithic trap column to allow preconcentration of the peptides. The injected sample is flushed at higher flow rates onto the trap column, bound to the stationary phase, and in this way concentrated in a few nanoliters before starting the separation. The expanded system was optimized and tested using different reference protein samples. Eluting peptides were detected by MALDI-TOF/TOF-MS and identified by database searching. The system is now a permanent part for proteome analysis in our lab, and as such, it was successfully applied for the detection of post-translational modifications and the analysis of membrane proteins. One example for these analyses is also included in this paper.     

Quantitation of efletirizine in human plasma and urine using automated solid-phase extraction and column-switching high-performance liquid chromatography

A heart-cut column-switching, ion-pair, reversed-phase HPLC system was used for the quantitation of efletirizine (EFZ) in biological fluids. The analyte and an internal standard (I.S.) were extracted from human EDTA plasma by C₁₈ solid-phase extraction (SPE) using a RapidTrace^® workstation. The eluent from the SPE was evaporated, reconstituted and injected onto the HPLC column. Urine samples were diluted and injected directly without the need of extraction. The compounds of interest were separated from most of the extraneous matrix materials by the first C₁₈ column, and switched onto a second C₁₈ column for further separation using a mobile phase of stronger eluting capability. Linearity range was 10–2000 ng ml⁻¹ for plasma and 0.05–10 μg ml⁻¹ for urine. The lower limit of quantitation (LOQ) was 10 ng from 1 ml of plasma, with a signal-to-noise ratio of 15:1. Inter-day precision and bias of quality control samples (QCs) were <5% for plasma and <7% for urine. Selectivity was established against six other antihistamines, three analogs of efletirizine, and on 12 control plasma lots and nine control urine lots. Recovery was 90.0% for EFZ and 89.5% for I.S. from plasma. One hundred samples can be processed in every 2.75 h on a 10-module RapidTrace^® workstation with minimal human attention. Method ruggedness were tested on three brands of SPE and six different lots of one SPE brand. Performance ruggedness was demonstrated by different analysts on multiple HPLC systems. Analyte stability through sample storage, extraction process (benchtop, freeze–thaw, refrigeration after extraction) and chromatography (on-system, reinjection) was established.     

Amino acids analysis using a monolithic silica column after derivatization with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F)

A fast HPLC method using a monolithic silica column was developed for the measurement of amino acids. The amino acids were pre-column derivatized with 4-fluoro-7-nitro-2,1,3-benzoxadiazole (NBD-F) and separated on a monolithic silica column (MonoClad C18-HS, 250 mm × 3 mm I.D.). The separation of 19 NBD-amino acids was achieved within 18 min, which was only one-fifth of the time taken by the methods using a conventional particle-packed column, with the gradient elution of a mobile phase at the flow rate of 1.4 mL/min. The sensitivity was good with a limit of detection for the individual amino acids ranging from 2.94 to 53.4 fmol. The calibration curves for all the amino acids were found to be linear in the range of 200 fmol to 20 pmol with correlation coefficients of 0.997 or better. The analytical method was successfully applied to determine the amino acids in a mouse plasma sample.     

A high-throughput monolithic HPLC method for rapid vitamin C phenotyping of berry fruit

A rapid method for the quantification of L-ascorbic acid (1) in berry fruit by HPLC with photodiode array detection is presented. L-Ascorbic acid was resolved on a C18 monolithic column with aqueous buffer, after which the column was washed with acetonitrile to remove lipophilic compounds prior to re-equilibration for analysis of the next sample. Using the monolithic column format with high mobile phase flow rates, the entire separation, wash and re-equilibration were achieved in 3 min. With the exception of gooseberry (Ribes uva-crispa), for which an interfering compound co-eluted, concentrations of 1 could be determined in a wide range of berry fruits after extraction in metaphosphoric acid without further sample preparation. Using this extraction method, recoveries of 1 in excess of 85% were achieved. Fruit or juice extracts were stable in 5% metaphosphoric acid for at least 4 h and stability could be extended to longer than 150 h by the addition of the reducing agent tris(2-carboxethyl)phosphine hydrochloride. Following validation, the method was utilised for the phenotyping of fruit in a Scottish Crop Research Institute (SCRI) Ribes nigrum L. breeding population of 300 individuals. An improved extraction method allowed extraction, quantification of 1 and data analysis to be undertaken in less than one working week.     

Chromatographic analysis of griseofulvin and metabolites in biological fluids

A simple and accurate assay for the determination of griseofulvin and its metabolites in biological fluids using high-performance liquid chromatography is described. Using a reversed phase column and a mobile phase solvent of 45% acetonitrile in 0.1 M acetic acid, baseline separation of griseofulvin and several analogues was obtained. The described method allows one to quantitatively determine griseofulvin, 6-demethylgriseofulvin, and griseofulvic acid, a newly identified metabolite in man, in urine and plasma samples. Treatment of plasma samples prior to the analysis is simply made by deproteinizing the samples with an equal volume of acetonitrile. For urine samples, the procedure involves diethyl ether extraction with subsequent evaporation to dryness and reconstitution with the mobile phase solvent.     

Sensitive high-performance liquid chromatography method for the determination of low levels of perchlorate in biological samples

A rapid and sensitive high-performance liquid chromatography (HPLC) method was developed to detect perchlorate in tissues of male and female rats, both pregnant and lactating (including milk) after administration of perchlorate. Supernatants of ethanol precipitated rat fluids and tissues were evaporated to dryness under nitrogen and reconstituted in deionized water. Reconstituted samples were injected into HPLC system coupled with conductivity detection. Isocratic separation of perchlorate was achieved using an anion-exchange column with sodium hydroxide as mobile phase and a conductivity detector. In this method, perchlorate showed a linear response range from 5 to 100 ng/ml. The lower detection limits for perchlorate in fluids and tissues of rats were 3-6 ng/ml and 0.007-0.7 mg/kg, respectively. The described method has the unique advantage over the existing methods of determining low traces of perchlorate in different biological matrices without complex sample preparation.     

Combining poly (methacrylic acid-co-ethylene glycol dimethacrylate) monolith microextraction and on-line pre-concentration-capillary electrophoresis for analysis of ephedrine and pseudoephedrine in human plasma and urine

A method based on poly (methacrylic acid-co-ethylene glycol dimethacrylate) (MAA-EGDMA) monolith microextraction (PMME) and field-enhanced sample injection (FESI) pre-concentration technique was proposed for sensitive capillary electrophoresis-ultraviolet (CE-UV) analysis of ephedrine (E) and pseudoephedrine (PE) in human plasma and urine. The PMME device consisted of a regular plastic syringe (1 mL), a poly (MAA-EGDMA) monolithic capillary (2 cm x 530 microm I.D.) and a plastic pinhead connecting the former two components seamlessly. The extraction was achieved by driving the sample solution through the monolithic capillary tube using a syringe pump, for the desorption step, an aliquot of organic solvent, which normally provided an excellent medium to ensure direct compatibility for FESI in CE, was injected via the monolithic capillary and collected into a vial for subsequent analysis by CZE. The best separation was achieved using a buffer composed of 0.1M phosphate electrolyte (pH 2.5) and 10% acetonitrile (v/v). The combination of both pre-concentration procedures allowed the detection limits of the analytes down to 5.3 ng/mL and 8.0 ng/mL in human plasma and urine, respectively. Excellent method of reproducibility was found over a linear range 50-5000 ng/mL in plasma and urine sample. Plasma and urine samples from volunteers receiving pseudoephedrine have also been successfully analysed.     

Restricted access materials and large particle supports for on-line sample preparation: an attractive approach for biological fluids analysis

An analytical process generally involves four main steps: (1) sample preparation; (2) analytical separation; (3) detection; and (4) data handling. In the bioanalytical field, sample preparation is often considered as the time-limiting step. Indeed, the extraction techniques commonly used for biological matrices such as liquid-liquid extraction (LLE) and solid-phase extraction (SPE) are achieved in the off-line mode. In order to perform a high throughput analysis, efforts have been engaged in developing a faster sample purification process. Among different strategies, the introduction of special extraction sorbents, such as the restricted access media (RAM) and large particle supports (LPS), allowing the direct and repetitive injection of complex biological matrices, represents a very attractive approach. Integrated in a liquid chromatography (LC) system, these extraction supports lead to the automation, simplification and speeding up of the sample preparation process. In this paper, RAM and LPS are reviewed and particular attention is given to commercially available supports. Applications of these extraction supports, are presented in single column and column-switching configurations, for the direct analysis of compounds in various biological fluids.     

Molecularly imprinted polymer cartridges coupled on-line with high performance liquid chromatography for simple and rapid analysis of dextromethorphan in human plasma samples

In this paper, a novel method is described for automated determination of dextromethorphan in biological fluids using molecularly imprinted solid-phase extraction (MISPE) as a sample clean-up technique combined with high performance liquid chromatography (HPLC). The water-compatible molecularly imprinted polymers (MIPs) were prepared using methacrylic acid as functional monomer, ethylene glycol dimethacrylate as cross-linker, chloroform as porogen and dextromethorphan as template molecule. These imprinted polymers were used as solid-phase extraction sorbent for the extraction of dextromethorphan from human plasma samples. Various parameters affecting the extraction efficiency of the MIP cartridges were evaluated. The high selectivity of the sorbent coupled to the high performance liquid chromatographic system permitted a simple and rapid analysis of this drug in plasma samples with limits of detection (LOD) and quantification (LOQ) of 0.12 ng/mL and 0.35 ng/mL, respectively. The MIP selectivity was evaluated by analyzing of the dextromethorphan in presence of several substances with similar molecular structures and properties. Results from the HPLC analyses showed that the recoveries of dextromethorphan using MIP cartridges from human plasma samples in the range of 1-50 ng/mL were higher than 87%.     

Determination of grepafloxacin in plasma and urine by a simple and rapid high-performance liquid chromatographic method

A rapid, specific, sensitive and economical method has been developed and validated for the determination of grepafloxacin in human plasma and urine. The assay consisted of reversed-phase HPLC with UV detection. Plasma proteins were removed by a fast and efficient procedure that has eliminated the need for costly extraction and evaporation. For the urine samples, the only required sample preparation was dilution. Separation was achieved on a reversed-phase TSK gel column with an isocratic mobile system. The method had a quantification limit of 0.05 μg/ml in plasma and 0.5 μg/ml in urine. The coefficients of variation (C.V.) were less than 4% for within- and between-day analyses. The method was successfully applied to a pharmacokinetic study, and was proved to be simple, fast and reproducible.     

Determination of amoxicillin in body fluids by reversed-phase liquid chromatography coupled with a post-column derivatization procedure

Quantitative methods for determination of amoxicillin in body fluids are described. They comprise separation by reversed-phase chromatography (LiChrosorb RP-8, 5 μm) of the aqueous supernatants obtained from plasma or urine after purification steps involving protein precipitation followed by extraction in the case of plasma, or a double extraction procedure in the case of urine, post-column derivatization with air segmentation, and finally measurement of the UV absorbance at 310 nm. The derivatization involves formation of the mercuric mercaptide of penicillenic acid and is specific for compounds with an intact penicillanic acid ring system.Detection limits achieved on injecting 200 μl of plasma and 20 μl of urine are about 25 ng/ml and 200 ng/ml, respectively, but it is possible to improve the sensitivity further by injecting larger volumes. Precisions (s_rel) obtained for determination of 0.10 and 0.45 μg/ml in plasma were 3.72 and 1.40%, respectively.Some problems regarding column stability originating from the injection of biological samples are discussed.     

Chiral Assay of Atenolol Present in Microdialysis and Plasma Samples of Rats Using Chiral CBH as Stationary Phase

Two different enantioselective chiral chromatographic methods were developed and validated to investigate the disposition of the β₁-receptor antagonist atenolol in blood and in brain extracellular fluid of rats (tissue dialysates). System A for the plasma samples was a one-column chromatographic system with a Chiral CBH column with an aqueous buffer as mobile phase into which cellobiose was added for selective regulation of the retention of the internal standard, (S)-metoprolol. The plasma samples were analysed after a simple extraction procedure. The limit of quantitation was 0.2 μg/ml for the atenolol enantiomers. The repeatability of the medium concentration quality control plasma sample (6.0 μg rac-atenolol/ml) was 11–18% for the enantiomers. The dynamic linear range of the plasma samples was 0.5–20 μg/ml. For system B, since atenolol is an extremely hydrophilic drug, the tissue dialysate sample required a much more sensitive system as compared to the plasma samples. A coupled column system was used for peak compression of the enantiomers in the eluate after the separation on the Chiral CBH column, hence increasing the detection sensitivity. The limit of quantification was 0.045 μg/ml for the atenolol enantiomers in artificial CSF. The repeatability of the medium concentration quality control samples (0.1 and 4.0 μg rac-atenolol/ml in artificial CSF and Hepes Ringer, respectively) was 2.8–9.3% for the two enantiomers. The dynamic linear range of the brain samples was 0.05–1.0 and 0.5–20 μg/ml in artificial CSF and Hepes Ringer, respectively. Chirality 9:329–334, 1997. © 1997 Wiley-Liss, Inc.     

Determination of methylguanidine in plasma and urine by high-performance liquid chromatography with fluorescence detection following postcolumn derivatization

A high-performance liquid chromatographic method was developed for the determination of methylguanidine in biological fluids. Methylguanidine and the internal standard were isolated from plasma by cation-exchange solid-phase extraction prior to chromatographic analysis. Urine samples were diluted and injected directly onto the analytical column. Chromatographic separation was carried out on an Ultrasil cation-exchange column using a mixture of methanol and monochloroacetate (15/85, v/v) as the mobile phase. Postcolumn derivatization of methylguanidine was carried out using alkaline ninhydrin reagent and the resulting fluorescent product was detected on-line. The method was specific, sensitive, reproducible, and linear over a wide a range of concentrations. The lower limit of detection for methylguanidine in plasma and urine was 1 and 100 ng/ml, respectively. The method was successfully employed for quantification of the levels of methylguanidine in normal and uremic human subjects, normal dogs, and dogs with ischemic-induced acute or spontaneous chronic renal failure.