Sequence analysis of the cryptic plasmid pMG101 from Rhodopseudomonas palustris and construction of stable cloning vectors

A 15-kb cryptic plasmid was obtained from a natural isolate of Rhodopseudomonas palustris. The plasmid, designated pMG101, was able to replicate in R. palustris and in closely related strains of Bradyrhizobium japonicum and phototrophic Bradyrhizobium species. However, it was unable to replicate in the purple nonsulfur bacterium Rhodobacter sphaeroides and in Rhizobium species. The replication region of pMG101 was localized to a 3.0-kb SalI-XhoI fragment, and this fragment was stably maintained in R. palustris for over 100 generations in the absence of selection. The complete nucleotide sequence of this fragment revealed two open reading frames (ORFs), ORF1 and ORF2. The deduced amino acid sequence of ORF1 is similar to sequences of Par proteins, which mediate plasmid stability from certain plasmids, while ORF2 was identified as a putative rep gene, coding for an initiator of plasmid replication, based on homology with the Rep proteins of several other plasmids. The function of these sequences was studied by deletion mapping and gene disruptions of ORF1 and ORF2. pMG101-based Escherichia coli-R. palustris shuttle cloning vectors pMG103 and pMG105 were constructed and were stably maintained in R. palustris growing under nonselective conditions. The ability of plasmid pMG101 to replicate in R. palustris and its close phylogenetic relatives should enable broad application of these vectors within this group of alpha-proteobacteria.     

Isolation and Molecular Characterization of pMG160, a Mobilizable Cryptic Plasmid from Rhodobacter blasticus

A 3.4-kb cryptic plasmid was obtained from a new isolate of Rhodobacter blasticus. This plasmid, designated pMG160, was mobilizable by the conjugative strain Escherichia coli S17.1 into Rhodobacter sphaeroides, Rhodobacter capsulatus, and Rhodopseudomonas palustris. It replicated in the latter strains but not in Rhodospirillum rubrum, Rhodocyclus gelatinosus, or Bradyrhizobium species. Plasmid pMG160 was stably maintained in R. sphaeroides for more than 100 generations in the absence of selection but showed segregational instability in R. palustris. Instability in R. palustris correlated with a decrease in plasmid copy number compared to the copy number in R. sphaeroides. The complete nucleotide sequence of plasmid pMG160 contained three open reading frames (ORFs). The deduced amino acid sequences encoded by ORF1 and ORF2 showed high degrees of homology to the MobS and MobL proteins that are involved in plasmid mobilization of certain plasmids. Based on homology with the Rep protein of several other plasmids, ORF3 encodes a putative rep gene initiator of plasmid replication. The functions of these sequences were demonstrated by deletion mapping, frameshift analysis, and analysis of point mutations. Two 6.1-kb pMG160-based E. coli-R. sphaeroides shuttle cloning vectors were constructed and designated pMG170 and pMG171. These two novel shuttle vectors were segregationally stable in R. sphaeroides growing under nonselective conditions.     

Isolation and molecular characterization of pMG160, a mobilizable cryptic plasmid from Rhodobacter blasticus

A 3.4-kb cryptic plasmid was obtained from a new isolate of Rhodobacter blasticus. This plasmid, designated pMG160, was mobilizable by the conjugative strain Escherichia coli S17.1 into Rhodobacter sphaeroides, Rhodobacter capsulatus, and Rhodopseudomonas palustris. It replicated in the latter strains but not in Rhodospirillum rubrum, Rhodocyclus gelatinosus, or Bradyrhizobium species. Plasmid pMG160 was stably maintained in R. sphaeroides for more than 100 generations in the absence of selection but showed segregational instability in R. palustris. Instability in R. palustris correlated with a decrease in plasmid copy number compared to the copy number in R. sphaeroides. The complete nucleotide sequence of plasmid pMG160 contained three open reading frames (ORFs). The deduced amino acid sequences encoded by ORF1 and ORF2 showed high degrees of homology to the MobS and MobL proteins that are involved in plasmid mobilization of certain plasmids. Based on homology with the Rep protein of several other plasmids, ORF3 encodes a putative rep gene initiator of plasmid replication. The functions of these sequences were demonstrated by deletion mapping, frameshift analysis, and analysis of point mutations. Two 6.1-kb pMG160-based E. coli-R. sphaeroides shuttle cloning vectors were constructed and designated pMG170 and pMG171. These two novel shuttle vectors were segregationally stable in R. sphaeroides growing under nonselective conditions.     

Characterization of a region of plasmid pBL1 of Brevibacterium lactofermentum involved in replication via the rolling circle model.

The minimal region for autonomous replication of pBL1, a 4.5-kb cryptic plasmid of Brevibacterium lactofermentum ATCC 13869 that has been used to construct a variety of corynebacterium vectors, was shown to be contained on a 1.8-kb HindII-SphI DNA fragment. This region contains two open reading frames (ORFs) (ORF1 and ORF5) which are essential for pBL1 replication in B. lactofermentum. Accumulation of single-strand intermediates in some of the constructions indicates that plasmid pBL1 replicates via the rolling circle replication model; its plus strand and minus strand were identified by hybridization with two synthetic oligonucleotide probes complementary to each pBL1 strand. ORF1 seems to encode the Rep protein and showed partial homology with sequences for Rep proteins from Streptomyces plasmids which replicate via rolling circle replication such as pIJ101, pSB24, and pJV1.     

Characterization and properties of a novel plasmid vector for Bacillus thuringiensis displaying compatibility with host plasmids.

A novel plasmid vector, composed of a 1.7-kb Bacillus thuringiensis (B.t.) replicon, a multiple cloning site, and an erythromycin-resistance marker gene from Bacillus subtilis, was constructed for use in B.t. Unlike other vectors which have been reported to be acceptable for B.t., this new B.t. vector was stably maintained in the absence of Er and did not displace host plasmids, some of which carry crystal protein-encoding genes (cry genes). The compatibility of this B.t. vector with native plasmids is highly desirable when introducing new cry genes into a wild-type B.t. strain. When a cryIIIA gene of B.t. tenebrionis was cloned in this vector and introduced into B.t. kurstaki (kur) HD119, cryIIIA was highly expressed without affecting the level of expression of native cry genes. The stability of this vector and its compatibility with native B.t. plasmids were achieved by subcloning only nucleotide sequences required for the vector to replicate in B.t. The origin of replication was first cloned on a 9.6-kb Bg/II fragment from a 75-kb plasmid of B.t. kur HD73 and then localized to a 2.4-kb region within the 9.6-kb fragment. Sequencing of the 2.4-kb region revealed the presence of an open reading frame (ORF), encoding a putative 312-amino acid (aa) protein. The deduced aa sequence of the ORF showed no homology to any published aa sequences. Deletion analysis indicated that the B.t. vector required at least the ORF and up to 300 bp surrounding the ORF, in order to replicate.     

Construction of hybrid plasmid vectors for cloning inEscherichia coli,Bacillus subtilis,and the cyanobacteriumAnacystis nidulans

Two hybrid plasmids capable of acting as shuttle cloning vectors inAnacystis nidulans andBacillus subtilis were constructed by in vitro ligation. One construct, pMG202, consists of theB. subtilis vector pNN101 and the endogenous cyanobacterial plasmid pUH24. This 14.6 kb plasmid confers chloramphenicol resistance in both hosts and tetracycline resistance inB. subtilis. A second vector, pMG101, consists of pNN101 linked to theA. nidulans-Escherichia coli chimeric plasmid pCB4 and is 12.9 kb in size. The pCB4 portion of the vector enables pMG101 to replicate in the third host,E. coli, and confers ampicillin resistance in this bacterium as well as inA. nidulans. Both plasmids possess identical uniqueStu I sites which permit insertional inactivation of the chloramphenicol resistance gene; and, in addition, identical uniqueXho I sites are present on both vectors. Each vector also has a third unique site:Sma I on pMG101 andXba I on pMG202.     

The Arcanobacterium (Actinomyces) pyogenes Plasmid pAP1 Is a Member of the pIJ101/pJV1 Family of Rolling Circle Replication Plasmids

The 2.4-kb plasmid pAP1 from Arcanobacterium (Actinomyces) pyogenes had sequence similarity within the putative replication protein and double-stranded origin with the pIJ101/pJV1 family of plasmids. pJGS84, a derivative of pAP1 containing a kanamycin resistance gene, was able to replicate in Escherichia coli and Corynebacterium pseudotuberculosis, as well as in A. pyogenes. Detection of single-stranded DNA intermediates of pJGS84 replication suggested that this plasmid replicates by the rolling circle mechanism.     

Control of Plasmid R1 Replication: Functions Involved in Replication, Copy Number Control, Incompatibility, and Switch-off of Replication

A small derivative of plasmid R1 was used to integratively suppress a chromosomal dnaA(Ts) mutation. The strain obtained grew normally at 42°C. The integratively suppressed strain was used as recipient for various plasmid R1 derivatives. Plasmid R1 and miniplasmid derivatives of R1 could be established in the strain that carried an integrated R1 replicon, but they were rapidly lost during growth. However, plasmids also carrying ColE1 replication functions were almost completely stably inherited. The integratively suppressed strain therefore allows the establishment of bacteria diploid with respect to plasmid R1 and forms a useful and sensitive system for studies of interaction between plasmid R1 replication functions. Several of the chimeric plasmids caused inhibition of growth at high temperatures. All plasmids that inhibited growth carried one particular PstI fragment from plasmid R1 (the PstI F fragment), and in all cases the growth inhibition could be ascribed to repression of initiation of chromosome replication at 42°C, i.e., they carry a trans-acting switch-off function. Furthermore, the analogous PstI fragments from different copy mutants of plasmid R1 were analyzed similarly, and one mutant was found to lack the switch-off function. The different chimeric plasmids were also tested for their incompatibility properties. All plasmids that carried the switch-off function (and no other plasmids) also carried R1 incompatibility gene(s). Since the PstI F fragment, which is present on all these plasmids, is very small (0.35 × 10⁶), it is suggested that the switch-off regulation of replication (by an inhibitor), incompatibility, and copy number control are governed by the same gene.     

Isolation and Characterization of a Rolling-Circle-Type Plasmid from Rhodococcus erythropolis and Application of the Plasmid to Multiple-Recombinant-Protein Expression

We isolated, sequenced, and characterized the cryptic plasmid pRE8424 from Rhodococcus erythropolis DSM8424. Plasmid pRE8424 is a 5,987-bp circular plasmid; it carries six open reading frames and also contains cis-acting elements, specifically a single-stranded origin and a double-stranded origin, which are characteristic of rolling-circle-replication plasmids. Experiments with pRE8424 derivatives carrying a mutated single-stranded origin sequence showed that single-stranded DNA intermediates accumulated in the cells because of inefficient conversion from single-stranded DNA to double-stranded DNA. This result indicates that pRE8424 belongs to the pIJ101/pJV1 family of rolling-circle-replication plasmids. Expression vectors that are functional in several Rhodococcus species were constructed by use of the replication origin from pRE8424. We previously reported a cryptic plasmid, pRE2895, from R. erythropolis, which may replicate by a θ-type mechanism, like ColE2 plasmids. The new expression vectors originating from pRE8424 were compatible with those derived from pRE2895. Coexpression experiments with these compatible expression vectors indicated that the plasmids are suitable for the simultaneous expression of multiple recombinant proteins.     

Functional Analysis of Three Plasmids from Lactobacillus plantarum

Lactobacillus plantarum WCFS1 harbors three plasmids, pWCFS101, pWCFS102, and pWCFS103, with sizes of 1,917, 2,365, and 36,069 bp, respectively. The two smaller plasmids are of unknown function and contain replication genes that are likely to function via the rolling-circle replication mechanism. The host range of the pWCFS101 replicon includes Lactobacillus species and Lactococcus lactis, while that of the pWCFS102 replicon also includes Carnobacterium maltaromaticum and Bacillus subtilis. The larger plasmid is predicted to replicate via the theta-type mechanism. The host range of its replicon seems restricted to L. plantarum. Cloning vectors were constructed based on the replicons of all three plasmids. Plasmid pWCFS103 was demonstrated to be a conjugative plasmid, as it could be transferred to L. plantarum NC8. It confers arsenate and arsenite resistance, which can be used as selective markers.     

Identification and characterization of an active plasmid partition mechanism for the novel Lactococcus lactis plasmid pCI2000

The replication region of the lactococcal plasmid pCI2000 was subcloned and analyzed. The nucleotide sequence of one 5.6-kb EcoRI fragment which was capable of supporting replication when cloned on a replication probe vector revealed the presence of seven putative open reading frames (ORFs). One ORF exhibited significant homology to several replication proteins from plasmids considered to replicate via a theta mode. Deletion analysis showed that this ORF, designated repA, is indeed required for replication. The results also suggest that the origin of replication is located outside repA. Upstream and divergently transcribed from repA, an ORF that showed significant (48 to 64%) homology to a number of proteins that are required for faithful segregation of chromosomal or plasmid DNA of gram-negative bacteria was identified. Gene interruption and transcomplementation experiments showed that this ORF, designated parA, is required for stable inheritance of pCI2000 and is active in trans. This is the first example of such a partitioning mechanism for plasmids in gram-positive bacteria.     

Influence of Different Functional Elements of Plasmid pGT232 on Maintenance of Recombinant Plasmids in Lactobacillus reuteri Populations In Vitro and In Vivo

Plasmid pGT232 (5.1 kb), an indigenous plasmid of Lactobacillus reuteri 100-23, was determined, on the basis of nucleotide and deduced protein sequence data, to belong to the pC194-pUB110 family of plasmids that replicate via the rolling-circle mechanism. The minimal replicon of pGT232 was located on a 1.7-kb sequence consisting of a double-strand origin of replication and a gene encoding the replication initiation protein, repA. An erythromycin-selectable recombinant plasmid containing this minimal replicon was stably maintained (>97% erythromycin-resistant cells) without antibiotic selection in an L. reuteri population under laboratory growth conditions but was poorly maintained (<33% resistant cells) in the L. reuteri population inhabiting the murine gastrointestinal tract. Stable maintenance (>90% resistant cells) of pGT232-derived plasmids in the lactobacillus population in vivo required an additional 1.0-kb sequence which contained a putative single-strand replication origin (SSO). The SSO of pGT232 is believed to be novel and functions in an orientation-specific manner.     

Dual-origin plasmids containing an amplifiable ColE1 ori; temperature-controlled expression of cloned genes

Dual-origin plasmids comprising an inducible ColE1-derived origin of replication controlled by the λ p_R promoter, the c1857 temperature-sensitive represser gene and the pSC101 origin of replication and its associated par sequence, were constructed. Such plasmids carrying cloned genes were stably maintained at four copies per chromosome, and were readily amplifiable by thermal induction. Cloned gene expression increased with copy number, and accumulation values of > 20% total cellular protein were detected. These vectors should prove useful for the production of foreign protein on a large scale, since they provide for stable plasmid maintenance during the growth phase, and high-level gene expression without plasmid loss during the production phase.     

Minireplicon from pBtoxis of Bacillus thuringiensis subsp. israelensis

A 2.2-kb fragment containing a replicon from pBtoxis, the large plasmid that encodes the insecticidal endotoxins of Bacillus thuringiensis subsp. israelensis, was identified, cloned, and sequenced. This fragment contains cis elements, including iterons, found in replication origins of other large plasmids and suggests that pBtoxis replicates by a type A theta mechanism. Two genes, pBt156 and pBt157, encoding proteins of 54.4 kDa and 11.8 kDa, respectively, were present in an operon within this minireplicon, and each was shown by deletion analysis to be essential for replication. The deduced amino acid sequences of the 54.4-kDa and 11.8-kDa proteins showed no substantial homology with known replication (Rep) proteins. However, the 54.4-kDa protein contained a conserved FtsZ domain, and the 11.8 kDa protein contained a helix-turn-helix motif. As FtsZ proteins have known functions in bacterial cell division and the helix-turn-helix motif is present in Rep proteins, it is likely that these proteins function in plasmid replication and partitioning. The minireplicon had a copy number of two or three per chromosome equivalent in B. thuringiensis subsp. israelensis but did not replicate in B. cereus, B. megaterium, or B. subtilis. A plasmid constructed to synthesize large quantities of the Cry11A and Cyt1A endotoxins demonstrated that this minireplicon can be used to engineer vectors for cry and cyt gene expression.     

Application of the resident plasmid integration technique to construct a strain of Streptococcus godronii able to express the Bacillus circulans cycloisomaltooligosaccharide glucanotransferase gene,and secrete its active gene product

A novel transformation technique, resident plasmid integration, for the cloning of foreign DNA in oral streptococci was described recently (T. Shiroza and H. K. Kuramitsu, Plasmid, 1995, 34, 85–95). This technique is based on the integration of linearized foreign genes by recombination-proficient bacteria onto a resident plasmid, if an appropriate selection marker is flanked by the same anchor sites present in the resident plasmid. Since the transforming vehicles for this system included a pUC-derived replication origin, the high level expression in Escherichia coli cells hindered the cloning of certain genes. In the present study, new plasmids were constructed, two resident plasmids, four integration plasmids, and four cloning plasmids, all of which possess the medium-copy number replication origin, p15A ori, isolated from pACYC177. The resident plasmids consisted of the following three components: the p15A ori (0.65-kb BglII fragment), the pVA380-1 basic replicon functional in mutans streptococci (2.5-kb BamHI fragment), and either an erythromycin resistance or a spectinomycin resistance gene (0.9- or 1.1-kb BamHI fragment, respectively). Most of the basic replicon of pVA380-1, except for the 3′-portion of the 0.2-kb region, in the resident plasmid was replaced with a kanamycin resistance gene to construct the four integration plasmids. Therefore, the upstream and downstream anchor sites for the double cross-over event in this new system were 0.65-kb p15A ori and the 0.2-kb portion of the 3′-end of pVA380-1 replicon, respectively. This system was used to clone the gene coding for cycloisomaltooligosaccharide glucanotransferase which produces cycloisomaltooligosaccharide, a potent inhibitor of oral streptococcal glucosyltransferase, isolated from Bacillus circulans chromosome, into Streptococcus gordonii, and its gene product was successfully secreted into the culture media. Plasmids described here should be useful tools for introducing heterologous DNA into resident plasmids following integration in oral streptococci.     

Identification of the minimal replication region of the multicopy Streptomyces plasmid pSL1

The 1.52-kb minimal replication origin of the 3.9-kb Streptomyces plasmid pSL1 was determined using a bifunctional derivative, pMCP44, of pSL1. Plasmids with linker insertions into the pSL1 part of pMCP44 were isolated from Escherichia coli. The sites of insertion were determined by restriction enzyme analysis and the ability of the mutant plasmids to replicate in S. lividans 66 was determined. All except one of the inserts in the 1.52-kb essential region inactivated replication. A 104-bp segment from this region could function as a replication origin in the presence of a helper plasmid containing a nonoverlapping pSL1 fragment. The sequence of this 104-bp fragment shows similarities to those of known plasmid replication origins.     

Sequence analysis and characterization of two cryptic plasmids derived from Lactobacillus buchneri CD034

Lactobacillus buchneri is probably the most beneficial microorganism for efficient preservation of animal feed silages made from grass, maize and other plant material against aerobic spoilage. Its obligatory heterofermentative nature, acid resistance and robustness have drawn attention to this species for applications as silage starter culture as well as for genetic engineering. For the first time, two cryptic plasmids present in the same L. buchneri strain, L. buchneri CD034, were isolated, sequenced and characterized. The larger plasmid, designated pCD034-1 was found to be 3424 bp in length with a G + C content of 38.36%. The smaller plasmid, designated pCD034-2 was found to be 2707 bp in length with a G + C content of 38.60%. On both plasmids we predicted three open reading frames. On pCD034-1, ORF 1 encodes a putative replication protein which shares 99% identity with the RepA protein of a Lactobacillus plantarum derived pC194/pUB110-family plasmid. ORF 2 encodes a putative protein of unknown function. ORF 1 and ORF 2 of pCD034-2 correspond to RepA and RepB proteins similar to those of plasmid pLB4 from L. plantarum. ORF 3 of both plasmids encodes a putative mobilization protein similar to that of the pediococcal plasmid pF8801. Double strand origins, putative single strand origins and typical mobilization start signals were identified. Both plasmids were shown to be maintained at relatively high plasmid copy numbers. Two shuttle vectors carrying the origins of replication of pCD034-1 and pCD034-2 were constructed and used to successfully transform two other species isolated from the same environment. Hence, we consider the two novel L. buchneri plasmids a valuable resource for the generation of shuttle and expression vectors for LAB.     

A host-vector system for gene cloning in the cyanobacterium Anacystis nidulans R2

We describe the construction of a series of vectors suitable for gene cloning in the Cyanobacterium Anacystis nidulans R2. From the indigenous plasmid pUH24, derivatives were constructed with streptomycin as the selective marker; one of these plasmids was used to construct pUC303, a shuttle vector capable of replication in A. nidulans R2 as well as in Escherichia coli K12. It has two markers, streptomycin and chloramphenicol resistance, and three unique restriction sites. Instability of recombinant plasmids was overcome by using a derivative of A. nidulans R2 cured of the indigenous plasmid pUH24. This strain, R2-SPc, can be transformed stably and at high frequency by the plasmids described in this paper. The combination of the cured strain R2-SPc and the new plasmid pUC303 serves as a suitable host-vector system for gene cloning in cyanobacteria.     

Replication Mechanism and Sequence Analysis of the Replicon of pAW63, a Conjugative Plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.