Substrate modulates compound I formation in peroxide shunt pathway of Pseudomonas putida cytochrome P450(cam)

The active oxygenating intermediate, a ferryl-oxo-(II) porphyrin cation radical (compound I), in substrate-bound cytochrome P450(cam) (P450(cam)) has eluded detection and kinetic analysis for several decades. Upon rapid mixing of peroxides-H(2)O(2) and m-CPBA with substrate-bound forms of P450(cam), we observed an intermediate with spectral features characteristic of compound I. Unlike in H(2)O(2), kinetic investigation on the reaction of m-CPBA with various substrate (camphor, adamantone, and norcamphor)-bound P450(cam) and its Y96A mutant shows a preferential binding of the aromatic end group of m-CPBA to the active-site of the enzyme and modulation of compound I formation by the local environment of heme active-site. The results presented in this paper describe the importance of heme environment in modulating formation of compound I, and form the first kinetic analysis of this intermediate in the peroxide shunt pathway of substrate-bound P450(cam).     

Effect of alcohols on binding of camphor to cytochrome P450cam: spectroscopic and stopped flow transient kinetic studies

Addition of alcohols to cytochrome P450cam (CYP101) was shown to release the substrate camphor from the heme pocket of the enzyme. The release of the substrate was found to be caused both due to increased solubility of the substrate in solution in presence of alcohol and due to change in the tertiary structure of the active site of the enzyme. The far-UV CD and near-UV CD spectra reveal that addition of alcohols to cytochrome P450cam cause a small change in the secondary structural elements but a significant change in the tertiary structural organization of this enzyme. The CD spectra at the heme region at various concentrations of alcohols indicate a substantial change in the tertiary structural organization around the heme moiety too. The equilibrium constant associated with the binding of camphor to Cyt P450cam is strongly dependent on the concentration of alcohols and the corresponding free energy associated with the binding is found to scale linearly with the concentration of alcohols. Kinetic experiments on binding of camphor to Cyt P450cam show that both k(on) and k(off) rate constants are strongly affected by addition of alcohols suggesting that alcohol expel camphor out of the heme cavity of Cyt P450cam by affecting tertiary structure of Cyt P450cam as well as by modifying the solubility properties of camphor in aqueous medium.     

Rapid kinetics investigations of peracid oxidation of ferric cytochrome P450cam: nature and possible function of compound ES

Previously, we reported spectroscopic properties of cytochrome P450cam compound I, (ferryl iron plus a porphyrin π-cation radical (Fe^IV = O/Por⁺)), as well as compound ES (Fe^IV = O/Tyr) in reactions of substrate-free ferric enzyme with m-chloroperbenzoic acid [T. Spolitak, J.H. Dawson, D.P. Ballou, J. Biol. Chem. 280 (2005) 20300-9]. Compound ES arises by intramolecular electron transfer from nearby tyrosines to the porphyrin π-cation radical of Compound I, and has been characterized by rapid-freeze-quench-Mössbauer/EPR spectroscopy; the tyrosyl radical was assigned to Tyr96 for wild type or to Tyr75 for the Tyr96Phe variant [V. Schünemann, F. Lendzian, C. Jung, J. Contzen, A.L. Barra, S.G. Sligar, A.X. Trautwein, J. Biol. Chem. 279 (2004) 10919–10930]. Here we report rapid-scanning stopped-flow studies of the reactions of peracids with substrate-free ferric Y75F, Y96F, and Y96F/Y75F P450cam variants, showing how these active site changes influence electron transfer from nearby tyrosines and affect formation of intermediates. Curiously, rates of generation of Compounds I and ES for both single mutants were not very different from wild type. Contrasting with the earlier EPR results, the Y96F/Y75F variant was also shown to form an ES-like species, but more slowly. When substrate is not present, or is improperly bound, compound I rapidly converts to compound ES, which can be reduced to form H₂O and ferric P450, thus avoiding the modification of nearby protein groups or release of reactive oxygen species.     

Role of protein and substrate dynamics in catalysis by Pseudomonas putida cytochrome P450cam

The role of protein structural flexibility and substrate dynamics in catalysis by cytochrome P450 enzymes is an area of current interest. We have addressed these in cytochrome P450(cam) (P450(cam)) and its Y96A mutant with camphor and its related compounds using fluorescence spectroscopy. Previously [Prasad et al. (2000) FEBS Lett. 477, 157-160], we provided experimental support to dynamic fluctuations in P450(cam), and substrate access into the active site region via the channel next to the flexible F-G helix-loop-helix segment. In the investigation described here, we show that the dynamic fluctuations in the enzyme are substrate dependent as reflected by tryptophan fluorescence quenching experiments. The orientation of tryptophan relative to heme (kappa(2)) for W42 obtained from time-resolved tryptophan fluorescence measurements show variation with type of substrate bound to P450(cam) suggesting regions distant from heme-binding site are affected by physicochemical and steric characteristics/protein-substrate interactions of P450(cam) active site. We monitored substrate dynamics in the active site region of P450(cam) by time-resolved substrate anisotropy measurements. The anisotropy decay of substrates bound to P450(cam) indicate that mobility of substrates is modulated by physicochemical and steric characteristics/protein-substrate interactions of local active site structure, and provides an understanding of factors controlling observed hydroxylated products for substrate bound P450(cam) complexes. The present study shows that P450(cam) local and peripheral structural flexibility and heterogeneity along with substrate mobility play an important role in regulating substrate binding orientation during catalysis and accommodating diverse range of substrates within P450(cam) heme pocket.     

Structural evidence for a functionally relevant second camphor binding site in P450cam: model for substrate entry into a P450 active site

P450cam has long served as a prototype for the cytochrome P450 (CYP) gene family. But, little is known about how substrate enters its active site pocket, and how access is achieved in a way that minimizes exposure of the reactive heme. We hypothesize that P450cam may first bind substrate transiently near the mobile F-G helix that covers the active site pocket. Such a two-step binding process is kinetically required if P450cam rarely populates an open conformation-as suggested by previous literature and the inability to obtain a crystal structure of P450cam in an open conformation. Such a mechanism would minimize exposure of the heme by allowing P450cam to stay in a closed conformation as long as possible, since only brief flexing into an open conformation would be required to allow substrate entry. To test this model, we have attempted to dock a second camphor molecule into the crystal structure of camphor-bound P450cam. The docking identified only one potential entry site pocket, a well-defined cavity on the F-helix side of the F-G flap, 16 A from the heme iron. Location of this entry site pocket is consistent with our NMR T1 relaxation-based measurements of distances for a camphor that binds in fast exchange (active site camphor is known to bind in slow exchange). Presence of a second camphor binding site is also confirmed with [(1)H-(13)C] HSQC titrations of (13)CH3-threonine labeled P450cam. To confirm that camphor can bind outside of the active site pocket, (13)CH3-S-pyridine was bound to the heme iron to physically block the active site, and to serve as an NMR chemical shift probe. Titration of this P450cam-pyridine complex confirms that camphor can bind to a site outside the active site pocket, with an estimated Kd of 43 microM. The two-site binding model that is proposed based on these data is analogous to that recently proposed for CYP3A4, and is consistent with recent crystal structures of P450cam bound to tethered-substrates, which force a partially opened conformation.     

The effects of metal ions on the structure and stability of the DNA gyrase B protein

The effects of mono- and divalent metal ions on the DNA gyrase B subunit, on its 43 kDa and 47 kDa domains, and on two mutants in the Toprim domain (D498A and D500C) were investigated by means of circular dichroism and protein melting experiments. Both types of metal ion, with the notable exception of Mn2+, did not affect the conformational properties of the enzyme subunit at room temperature, but were able to produce selective and differential effects on protein stability. In particular, monovalent (K+) ions increased the stability of the gyrase B structure, whereas destabilising effects were most prominent using Mn2+ as the metal ion. Ca2+ and Mg2+ produced comparable changes in the gyrase B melting profile. Additionally, we found that monovalent (K+) ions were more effective in the 43 kDa N-terminal domain where ATP binding occurs, whereas divalent ions caused large modifications in the conformational stability of the 47 kDa C-terminal domain. Our results on gyrase B mutants indicate that D498 interacts with Mn2+, whereas it has little effect on the binding of the other ions tested. A D500C mutation, in contrast, effectively impairs Mg2+ affinity, suggesting effective contacts between this ion and D500 in the wild-type enzyme. Hence, the sites of metal ion complexation within the Toprim domain are modulated by the nature of the ion species. These results suggest a double role played by metal ions in the catalytic steps involving DNA gyrase B. One has to do with direct involvement of cations complexed to the Toprim domain in the DNA cutting-rejoining process, the other, until now overlooked, is connected to the dramatic changes in protein flexibility produced by ion binding, which reduces the energy required for the huge conformational changes essential for the catalytic cycle to occur.     

Conservation of helical structure contributes to functional metal ion interactions in the catalytic domain of ribonuclease P RNA

Like protein enzymes, catalytic RNAs contain conserved structure motifs important for function. A universal feature of the catalytic domain of ribonuclease P RNA is a bulged-helix motif within the P1-P4 helix junction. Here, we show that changes in bulged nucleotide identity and position within helix P4 affect both catalysis and substrate binding, while a subset of the mutations resulted only in catalytic defects. We find that the proximity of the bulge to sites of metal ion coordination in P4 is important for catalysis; moving the bulge distal to these sites and deleting it had similarly large effects, while moving it proximal to these sites had only a moderate effect on catalysis. To test whether the effects of the mutations are linked to metal ion interactions, we used terbium-dependent cleavage of the phosphate backbone to probe metal ion-binding sites in the wild-type and mutant ribozymes. We detect cleavages at specific sites within the catalytic domain, including helix P4 and J3/4, which have previously been shown to participate directly in metal ion interactions. Mutations introduced into P4 cause local changes in the terbium cleavage pattern due to alternate metal ion-binding configurations with the helix. In addition, a bulge deletion mutation results in a 100-fold decrease in the single turnover cleavage rate constant at saturating magnesium levels, and a reduced affinity for magnesium ions important for catalysis. In light of the alternate terbium cleavage pattern in P4 caused by bulge deletion, this decreased ability to utilize magnesium ions for catalysis appears to be due to localized structural changes in the ribozyme's catalytic core that weaken metal ion interactions in P4 and J3/4. The information reported here, therefore, provides evidence that the universal conservation of the P4 structure is based in part on optimization of metal ion interactions important for catalysis.     

Specific and non-specific effects of potassium cations on substrate-protein interactions in cytochromes P450cam and P450lin

Substrate binding to cytochrome P450cam is generally considered to be a two-step process. The first step corresponds to the entrance of the substrate, camphor, into the heme pocket. The second step corresponds to a spin transition (low spin-->high spin) of the iron in the protein-substrate complex. This spin transition is related to the mobility of the substrate inside the active site [Biochim Biophys Acta 1338 (1997) 77]. Potassium cations (K(+)) have a specific effect on the spin equilibrium. This is generally attributed to the K(+) ion-induced conformational change of tyrosine 96, the hydroxyl group of which is hydrogen bonded to the keto group of camphor and results in optimum substrate orientation and reduced mobility of this substrate in the active site. In the present paper, we show that K(+) not only affects the substrate-Tyr 96 couple, but acts more globally since K(+) effects are also observed in the Tyr96Phe mutant as well as in complexes with camphor-analogues. Large compounds, that fit well in the heme pocket and bind with higher affinity than camphor, display high spin contents that are less dependent on the presence of K(+). In contrast, K(+) has a significant effect on the high spin content of substrate-cytochrome P450cam complexes with looser interactions. We conclude that large compounds with higher affinities than camphor have more van der Waals contacts with the active site residues. Their mobilities are then reduced and less dependent on the presence of K(+). In this study, we also explored, for comparison, the K(+) effect on the spin transition state of another member of the P450 superfamily, cytochrome P450lin. This effect is not as strong as those observed for cytochrome P450cam. Even though the spin equilibrium does not change dramatically in the presence of K(+) or Na(+), the value of the dissociation constant (K(d)) for linalool binding is significantly affected by ionic strength. Analysis of the thermodynamic parameters for the linalool binding strongly suggests that, similarly to our previous finding for cytochrome P450cam, electrostatic gates participate in the control of substrate access.     

Mechanism of O2 activation by cytochrome P450cam studied by isotope effects and transient state kinetics

The early steps in dioxygen activation by the monooxygenase cytochrome P450cam (CYP101) include binding of O2 to ferrous P450cam to yield the ferric-superoxo form (oxyP450cam) followed by an irreversible, long-range electron transfer from putidaredoxin to reduce the oxyP450cam. The steady state kinetic parameter kcat/Km(O2) has been studied by a variety of probes that indicate a small D2O solvent isotope effect (1.21 +/- 0.08), a very small solvent viscosogen effect, and a 16O/18O isotope effect of 1.0147 +/- 0.0007. This latter value, which can be compared with the 16O/18O equilibrium isotope effect of 1.0048 +/- 0.0003 measured for oxyP450cam formation, is attributed to a primarily rate-limiting outer-sphere electron transfer from the heme iron center as O2 that has prebound to protein approaches the active site cofactor. The electron transfer from putidaredoxin to oxyP450cam was investigated by rapid mixing at 25 degrees C to complement previous lower-temperature measurements. A rate of 390 +/- 23 s-1 (and a near-unity solvent isotope effect) supports the view that the long-range electron transfer from reduced putidaredoxin to oxyP450cam is rapid relative to dissociation of O2 from the enzyme. P450cam represents the first enzymatic reaction of O2 in which both equilibrium and kinetic 16O/18O isotope effects have been measured.     

Divalent metal cofactor binding in the kinetic folding trajectory of Escherichia coli ribonuclease HI

Proteins often require cofactors to perform their biological functions and must fold in the presence of their cognate ligands. Using circular dichroism spectroscopy. we investigated the effects of divalent metal binding upon the folding pathway of Escherichia coli RNase HI. This enzyme binds divalent metal in its active site, which is proximal to the folding core of RNase HI as defined by hydrogen/deuterium exchange studies. Metal binding increases the apparent stability of native RNase HI chiefly by reducing the unfolding rate. As with the apo-form of the protein, refolding from high denaturant concentrations in the presence of Mg2+ follows three-state kinetics: formation of a rapid burst phase followed by measurable single exponential kinetics. Therefore, the overall folding pathway of RNase HI is minimally perturbed by the presence of metal ions. Our results indicate that the metal cofactor enters the active site pocket only after the enzyme reaches its native fold, and therefore, divalent metal binding stabilizes the protein by decreasing its unfolding rate. Furthermore, the binding of the cofactor is dependent upon a carboxylate critical for activity (Asp10). A mutation in this residue (D10A) alters the folding kinetics in the absence of metal ions such that they are similar to those observed for the unaltered enzyme in the presence of metal.     

The P15-loop of Escherichia coli RNase P RNA is an autonomous divalent metal ion binding domain.

We have studied the structure and divalent metal ion binding of a domain of the ribozyme RNase P RNA that is involved in base pairing with its substrate. Our data suggest that the folding of this internal loop, the P15-loop, is similar irrespective of whether it is part of the full-length ribozyme or part of a model RNA molecule. We also conclude that this element constitutes an autonomous divalent metal ion binding domain of RNase P RNA and our data suggest that certain specific chemical groups within the P15-loop participate in coordination of divalent metal ions. Substitutions of the Sp- and Rp-oxygens with sulfur at a specific position in this loop result in a 2.5-5-fold less active ribozyme, suggesting that Mg2+ binding at this position contributes to function. Our findings strengthen the concept that small RNA building blocks remain basically unchanged when removed from their structural context and thus can be used as models for studies of their potential function and structure within native RNA molecules.     

Crystal structure of substrate-free Pseudomonas putida cytochrome P-450

The crystal structure of Pseudomonas putida cytochrome P-450cam in the substrate-free form has been refined at 2.20-A resolution and compared to the substrate-bound form of the enzyme. In the absence of the substrate camphor, the P-450cam heme iron atom is hexacoordinate with the sulfur atom of Cys-357 providing one axial heme ligand and a water molecule or hydroxide ion providing the other axial ligand. A network of hydrogen-bonded solvent molecules occupies the substrate pocket in addition to the iron-linked aqua ligand. When a camphor molecule binds, the active site waters including the aqua ligand are displaced, resulting in a pentacoordinate high-spin heme iron atom. Analysis of the Fno camphor - F camphor difference Fourier and a quantitative comparison of the two refined structures reveal that no detectable conformational change results from camphor binding other than a small repositioning of a phenylalanine side chain that contacts the camphor molecule. However, large decreases in the mean temperature factors of three separate segments of the protein centered on Tyr-96, Thr-185, and Asp-251 result from camphor binding. This indicates that camphor binding decreases the flexibility in these three regions of the P-450cam molecule without altering the mean position of the atoms involved.     

Interaction of divalent metal ions with the NADP+-malic enzyme from maize leaves

The effect of several metal ions on NADP⁺-malic enzyme (EC 1.1.1.40) purified from Zea mays L. leaves was studied Mg²⁺, Mn²⁺, Co²⁺ and Cd²⁺ were all active metal cofactors. The malic enzyme from maize has a moderately high intrinsic preference for Mn²⁺ relative to Mg²⁺ at pH 7.0 and 8.0 Negative cooperativity detected in the binding of Mg²⁺ at pH 7.0 and 8.0 and in the binding of Mn²⁺ at pH 7.0 suggests the existence of at least two binding sites with different affinity. All of the activating metal ions have preference for octahedral coordination geometry and have ionic radii of 0.86–1.09 Å. The ions that act as inhibitors are outside this range and/or are incapable of octahedral coordination. Ba²⁺, Sr²⁺, Cd²⁺, Ca²⁺, Be²⁺, Ni²⁺, Cu²⁺, Zn²⁺, Co²⁺, Hg²⁺ showed mixed-type inhibition. The reciprocal of their K₁ values follow the order of their apparence in the Irving-Williams series of stability that derives in part from size effects. It is suggested that the size of the ions may play a partial role in determining the strength of the metal interaction.     

Detection of heavy metal toxicity using cardiac cell-based biosensor

Biosensors incorporating mammalian cells have a distinct advantage of responding in a manner which offers insight into the physiological effect of an analyte. To investigate the potential applications of cell-based biosensors on heavy metal toxicity detection, a novel biosensor for monitoring electrophysiological activity was developed by light-addressable potentiometric sensor (LAPS). Extracellular field potentials of spontaneously beating cardiomyocytes could be recorded by LAPS in the range of 20 μV to nearly 40 μV with frequency of 0.5–3 Hz. After exposed to different heavy metal ions (Hg²⁺, Pb²⁺, Cd²⁺, Fe³⁺, Cu²⁺, Zn²⁺; in concentration of 10 μM), cardiomyocytes demonstrated characteristic changes in terms of beating frequency, amplitude and duration under the different toxic effects of ions in less than 15 min. This study suggests that, with the physiological monitoring, it is possible to use the cardiac cell-based biosensor to study acute and eventually chronic toxicities induced by heavy metal ions in a long-term and no-invasive way.     

Divalent metal ion, inorganic phosphate, and inorganic phosphate analogue binding to yeast inorganic pyrophosphatase

Four different techniques, equilibrium dialysis, protection of enzymatic activity against chemical inactivation, 31P relaxation rats, and water proton relaxation rates, are used to study divalent metal ion, inorganic phosphate, and inorganic phosphate analogue binding to yeast inorganic pyrophosphatase, EC 3.6.1.1. A major new finding is that the binding of a third divalent metal ion per subunit, which has elsewhere been implicated as being necessary for enzymatic activity [Springs, B., Welsh, K. M., & Cooperman, B. S. (1981) Biochemistry (in press)], only becomes evident in the presence of added inorganic phosphate and that, reciprocally, inorganic phosphate binding to both its high- and low-affinity sites on the enzyme is markedly enhanced in the presence of divalent metal ions, with Mn2+ causing an especially large increase in affinity. The results obtained allow evaluation of all of the relevant equilibrium constants for the binding of Mn2+ and inorganic phosphate or of Co2+ and inorganic phosphate to the enzyme and show that the high-affinity site has greater specificity for inorganic phosphate than the low-affinity site. In addition, they provide. The results obtained allow evaluation of all of the relevant equilibrium constants for the binding of Mn2+ and inorganic phosphate or of Co2+ and inorganic phosphate to the enzyme and show that the high-affinity site has greater specificity for inorganic phosphate than the low-affinity site. In addition, they provide. The results obtained allow evaluation of all of the relevant equilibrium constants for the binding of Mn2+ and inorganic phosphate or of Co2+ and inorganic phosphate to the enzyme and show that the high-affinity site has greater specificity for inorganic phosphate than the low-affinity site. In addition, they provide evidence against divalent metal ion inner sphere binding to phosphate for enzyme subunits having one or two divalent metal ions bound per subunit and evidence for a conformational change restricting active-site accessibility to solvent on the binding of a third divalent metal ion per subunit.     

Structural and functional characterization of "laboratory evolved" cytochrome P450cam mutants showing enhanced naphthalene oxygenation activity

To elucidate molecular mechanisms for the enhanced oxygenation activity in the three mutants of cytochrome P450cam screened by 'laboratory evolution' [Nature 399 (1999) 670], we purified the mutants and characterized their functional and structural properties. The electronic absorption and resonance Raman spectra revealed that the structures of heme binding site of all purified mutants were quite similar to that of the wild-type enzyme, although the fraction of the inactivated form, called "P420," was increased. In the reaction with H(2)O(2), only trace amounts of the naphthalene hydroxylation product were detected by gas chromatography. We, therefore, conclude that the three mutants do not exhibit significant changes in the structural and functional properties from those of wild-type P450cam except for the stability of the axial ligand in the reduced form. The enhanced fluorescence in the whole-cell assay would reflect enhancement in the oxygenation activity below the detectable limit of the gas chromatography and/or contributions of other reactions catalyzed by the heme iron.     

Self-assembly of the binuclear metal center of phosphotriesterase

The active site of the bacterial phosphotriesterase (PTE) from Pseudomonas diminuta contains two divalent metal ions and a carboxylated lysine residue. The native enzyme contains two Zn(2+) ions, which can be replaced with Co(2+), Cd(2+), Ni(2+), or Mn(2+) without loss of catalytic activity. Carbon dioxide reacts with the side chain of lysine-169 to form a carbamate functional group within the active site, which then serves as a bridging ligand to the two metal ions. The activation of apo-PTE using variable concentrations of divalent metal ions and bicarbonate was measured in order to establish the mechanism by which the active site of PTE is self-assembled. The time courses for the activation of apo-PTE are pseudo-first-order, and the observed rate constants are directly proportional to the concentration of bicarbonate. In contrast, the apparent rate constants for the activation of apo-PTE decrease as the concentrations of the divalent cations are increased and then become constant at higher concentrations of the divalent metal ions. These results are consistent with a largely ordered kinetic mechanism for the assembly of the binuclear metal center where CO(2)/bicarbonate reacts with the apo-PTE prior to the binding of the two metal ions. When apo-PTE is titrated with 0-8 equiv of Co(2+), Cd(2+), or Zn(2+), the concentration of activated enzyme increases linearly until 2 equiv of metal ion is added and then remains constant at elevated levels of the divalent cations. These results are consistent with the synergistic binding of the two metal ions to the active site, and thus the second metal ion binds more tightly to the protein than does the first metal ion. Measurement of the mean dissociation constant indicates that metal binding to the binuclear metal center is strong [(K(alpha)K(beta))(1/2) = 6.0 x 10(-)(11) M and k(off) = 1.5 x 10(-)(3) min(-)(1) for Zn(2+)]. The removal of the carbamate bridge through the mutagenesis of Lys-169 demonstrates that the carbamate bridge is required for both efficient catalysis and overall stability of the metal center.     

Effect of calcium and other metal ions on pectic activities from autolysed cultures of Alternaria alternata

Abstract The effect of increasing concentrations of Ca²⁺, Mg²⁺, Cu²⁺, Zn²⁺, Na⁺ and EDTA on the pectic enzymic activities (polymethylgalacturonase, endopectinase and pectin-lyase) present in the autolytic complex from Alternaria alternata has been studied. In all cases the divalent metal ions and EDTA produced an increased inhibition correlated with increasing concentration of each ion. An opposite effect was shown by the Na⁺ ion, which produced an increase in pectic enzymic activities, principally at low concentrations.     

Protection and Potentiation of 1-Methyl-4-Phenylpyridinium-Induced Toxicity by Cytochrome P450 Inhibitors and Inducer May Be Due to the Altered Uptake of the Toxin

Abstract: Earlier studies from our laboratory have demonstrated that 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP) toxicity could be modulated by inhibitors and inducer of cytochrome P450 (P450) in an in vitro model consisting of sagittal slices of mouse brain. To understand the molecular mechanisms underlying the role of P450 on MPTP toxicity, it was undertaken to study the effect of the modulators of P450 on the toxicity of the metabolite of MPTP, namely, 1-methyl-4-phenylpyridinium ion (MPP⁺). Incubation of mouse brain slices with various concentrations of MPP⁺ (1–100 µ M ) resulted in dose-dependent inhibition of mitochondrial enzyme NADH-dehydrogenase (NADH-DH) and leakage of the cytosolic enzyme lactate dehydrogenase from the slice into the medium. MPP⁺-induced toxicity was abolished by pretreatment of the slices with inhibitors of monoamine oxidase (MAO; pargyline and deprenyl) or inhibitors of P450 (piperonyl butoxide or SKF-525A) or dopamine uptake blocker (GBR-12909), as measured by the activity of NADH-DH in slices and leakage of lactate dehydrogenase from the slice into the medium. Slices prepared from mice pretreated with phenobarbital (an inducer of P450) potentiated the toxic effects of MPP⁺. Pretreatment of slices with MAO-inhibitor, P450 inhibitors, or dopamine uptake blocker attenuated the uptake of MPP⁺ into the slices. In contrast, MPP⁺ uptake was significantly increased in slices prepared from phenobarbital-pretreated mice. Thus, both MAO and P450 inhibitors abolish the toxicity of MPP⁺ in the sagittal slices of mouse brain by altering the uptake of the toxin into the slices.