Site-specific mutations in a minimal voltage-dependent K+ channel alter ion selectivity and open-channel block

MinK is a small membrane protein of 130 amino acids with a single potential membrane-spanning alpha-helical domain. Its expression in Xenopus oocytes induces voltage-dependent, K(+)-selective channels. Using site-directed mutagenesis of a synthetic gene, we have identified residues in the hydrophobic region of minK that influence both ion selectivity and open-channel block. Single amino acid changes increase the channel's relative permeability for NH4+ and Cs+ without affecting its ability to exclude Na+ and Li+. Blockade by two common K+ channel pore blockers, tetraethylammonium and Cs+, was also modified. These results suggest that an ion selectivity region and binding sites for the pore blockers within the conduction pathway have been modified. We conclude that the gene encoding minK is a structural gene for a K+ channel protein.     

Novel Residues Lining the CFTR Chloride Channel Pore Identified by Functional Modification of Introduced Cysteines

Substituted cysteine accessibility mutagenesis (SCAM) has been used widely to identify pore-lining amino acid side chains in ion channel proteins. However, functional effects on permeation and gating can be difficult to separate, leading to uncertainty concerning the location of reactive cysteine side chains. We have combined SCAM with investigation of the charge-dependent effects of methanethiosulfonate (MTS) reagents on the functional permeation properties of cystic fibrosis transmembrane conductance regulator (CFTR) Cl^– channels. We find that cysteines substituted for seven out of 21 continuous amino acids in the eleventh and twelfth transmembrane (TM) regions can be modified by external application of positively charged [2-(trimethylammonium)ethyl] MTS bromide (MTSET) and negatively charged sodium [2-sulfonatoethyl] MTS (MTSES). Modification of these cysteines leads to changes in the open channel current–voltage relationship at both the macroscopic and single-channel current levels that reflect specific, charge-dependent effects on the rate of Cl⁻ permeation through the channel from the external solution. This approach therefore identifies amino acid side chains that lie within the permeation pathway. Cysteine mutagenesis of pore-lining residues also affects intrapore anion binding and anion selectivity, giving more information regarding the roles of these residues. Our results demonstrate a straightforward method of screening for pore-lining amino acids in ion channels. We suggest that TM11 contributes to the CFTR pore and that the extracellular loop between TMs 11 and 12 lies close to the outer mouth of the pore.     

CFTR: covalent and noncovalent modification suggests a role for fixed charges in anion conduction

The goal of the experiments described here was to explore the possible role of fixed charges in determining the conduction properties of CFTR. We focused on transmembrane segment 6 (TM6) which contains four basic residues (R334, K335, R347, and R352) that would be predicted, on the basis of their positions in the primary structure, to span TM6 from near the extracellular (R334, K335) to near the intracellular (R347, R352) end. Cysteines substituted at positions 334 and 335 were readily accessible to thiol reagents, whereas those at positions 347 and 352 were either not accessible or lacked significant functional consequences when modified. The charge at positions 334 and 335 was an important determinant of CFTR channel function. Charge changes at position 334--brought about by covalent modification of engineered cysteine residues, pH titration of cysteine and histidine residues, and amino acid substitution--produced similar effects on macroscopic conductance and the shape of the I-V plot. The effect of charge changes at position 334 on conduction properties could be described by electrodiffusion or rate-theory models in which the charge on this residue lies in an external vestibule of the pore where it functions to increase the concentration of Cl adjacent to the rate-limiting portion of the conduction path. Covalent modification of R334C CFTR increased single-channel conductance determined in detached patches, but did not alter open probability. The results are consistent with the hypothesis that in wild-type CFTR, R334 occupies a position where its charge can influence the distribution of anions near the mouth of the pore.     

Location of a common inhibitor binding site in the cytoplasmic vestibule of the cystic fibrosis transmembrane conductance regulator chloride channel pore

Chloride transport by the cystic fibrosis transmembrane conductance regulator (CFTR) Cl- channel is inhibited by a broad range of organic anions that enter the channel pore from its cytoplasmic end, physically occluding the Cl- permeation pathway. These open channel blocker molecules are presumed to bind within a relatively wide pore inner vestibule that shows little discrimination between different large anions. The present study uses patch clamp recording to identify a pore-lining lysine residue, Lys-95, that acts to attract large blocker molecules into this inner vestibule. Mutations that remove the fixed positive charge associated with this amino acid residue dramatically weaken the blocking effects of five structurally unrelated open channel blockers (glibenclamide, 4,4'-dinitrostilbene-2,2'-disulfonic acid, lonidamine, 5-nitro-2-(3-phenylpropylamino)benzoic acid, and taurolithocholate-3-sulfate) when applied to the cytoplasmic face of the membrane. Mutagenesis of Lys-95 also induced amino acid side chain charge-dependent rectification of the macroscopic current-voltage relationship, consistent with the fixed positive charge on this residue normally acting to attract Cl- ions from the intracellular solution into the pore. These results identify Lys-95 as playing an important role in attracting permeant anions into the channel pore inner vestibule, probably by an electrostatic mechanism. This same electrostatic attraction mechanism also acts to attract larger anionic molecules into the relatively wide inner vestibule, where these substances bind to block Cl- permeation. Thus, structurally diverse open channel blockers of CFTR appear to share a common molecular mechanism of action that involves interaction with a positively charged amino acid side chain located in the inner vestibule of the pore.     

An ion selectivity filter in the extracellular domain of Cys-loop receptors reveals determinants for ion conductance

Neurotransmitter binding to Cys-loop receptors promotes a prodigious transmembrane flux of several million ions/s, but to date, structural determinants of ion flux have been identified flanking the membrane-spanning region. Using x-ray crystallography, sequence analysis, and single-channel recording, we identified a novel determinant of ion conductance near the point of entry of permeant ions. Co-crystallization of acetylcholine-binding protein with sulfate anions revealed coordination of SO4(2-) with a ring of lysines at a position equivalent to 24 A above the lipid membrane in homologous Cys-loop receptors. Analysis of multiple sequence alignments revealed that residues equivalent to the ring of lysines are negatively charged in cation-selective receptors but are positively charged in anion-selective receptors. Charge reversal of side chains at homologous positions in the nicotinic receptor from the motor end plate decreases unitary conductance up to 80%. Selectivity filters stemming from transmembrane alpha-helices have similar pore diameters and compositions of amino acids. These findings establish that when the channel opens under a physiological electrochemical gradient, permeant ions are initially stabilized within the extracellular vestibule of Cys-loop receptors, and this stabilization is a major determinant of ion conductance.     

Outer pore topology of the ECaC-TRPV5 channel by cysteine scan mutagenesis

The substituted cysteine accessibility method (SCAM) was used to map the external vestibule and the pore region of the ECaC-TRPV5 calcium-selective channel. Cysteine residues were introduced at 44 positions from the end of S5 (Glu515) to the beginning of S6 (Ala560). Covalent modification by positively charged MTSET applied from the external medium significantly inhibited whole cell currents at 15/44 positions. Strongest inhibition was observed in the S5-linker to pore region (L520C, G521C, and E522C) with either MTSET or MTSES suggesting that these residues were accessible from the external medium. In contrast, the pattern of covalent modification by MTSET for residues between Pro527 and Ile541 was compatible with the presence of a alpha-helix. The absence of modification by the negatively charged MTSES in that region suggests that the pore region has been optimized to favor the entrance of positively charged ions. Cysteine mutants at positions -1, 0, +1, +2 around Asp542 (high Ca2+ affinity site) were non-functional. Whole cell currents of cysteine mutants at +4 and +5 positions were however covalently inhibited by external MTSET and MTSES. Altogether, the pattern of covalent modification by MTS reagents globally supports a KcsA homology-based three-dimensional model whereby the external vestibule in ECaC-TRPV5 encompasses three structural domains consisting of a coiled structure (Glu515 to Tyr526) connected to a small helical segment of 15 amino acids (527PTALFSTFELFLT539) followed by two distinct coiled structures Ile540-Pro544 (selectivity filter) and Ala545-Ile557 before the beginning of S6.     

Exploration of the pore structure of a peptide-gated Na+ channel

The FMRF-amide-activated sodium channel (FaNaC), a member of the ENaC/Degenerin family, is a homotetramer, each subunit containing two transmembrane segments. We changed independently every residue of the first transmembrane segment (TM1) into a cysteine and tested each position's accessibility to the cysteine covalent reagents MTSET and MTSES. Eleven mutants were accessible to the cationic MTSET, showing that TM1 faces the ion translocation pathway. This was confirmed by the accessibility of cysteines present in the acid-sensing ion channels and other mutations introduced in FaNaC TM1. Modification of accessibilities for positions 69, 71 and 72 in the open state shows that the gating mechanism consists of the opening of a constriction close to the intracellular side. The anionic MTSES did not penetrate into the channel, indicating the presence of a charge selectivity filter in the outer vestibule. Furthermore, amiloride inhibition resulted in the channel occlusion in the middle of the pore. Summarizing, the ionic pore of FaNaC includes a large aqueous cavity, with a charge selectivity filter in the outer vestibule and the gate close to the interior.     

Single-channel studies on linear gramicidins with altered amino acid side chains. Effects of altering the polarity of the side chain at position 1 in gramicidin A.

The modulation of gramicidin A single-channel characteristics by the amino acid side chains was investigated using gramicidin A analogues in which the NH2 terminal valine was chemically replaced by other amino acids. The replacements were chosen such that pairs of analogues would have essentially isosteric side chains of different polarities at position 1 (valine vs. trifluorovaline or hexafluorovaline; norvaline vs. S-methyl-cysteine; and norleucine vs. methionine). Even though the side chains are not in direct contact with the permeating ions, the single-channel conductances for Na+ and Cs+ are markedly affected by the changes in the physico-chemical characteristics of the side chains. The maximum single-channel conductance for Na+ is decreased by as much as 10-fold in channels formed by analogues with polar side chains at position 1 compared with their counterparts with nonpolar side chains, while the Na+ affinity is fairly insensitive to these changes. The relative conductance changes seen with Cs+ were less than those seen with Na+; the ion selectivity of the channels with polar side chains at position 1 was increased. Hybrid channels could form between compounds with a polar side chain at position 1 and either valine gramicidin A or their counterparts with a nonpolar side chain at position 1. The structure of channels formed by the modified gramicidins is thus essentially identical to the structure of channels formed by valine gramicidin A. The polarity of the side chain at position 1 is an important determinant of the permeability characteristics of the gramicidin A channel. We discuss the importance of having structural information when interpreting the functional consequences of site-directed amino acid modifications.     

Structure of the 5th transmembrane segment of the Na,K-ATPase alpha subunit: a cysteine-scanning mutagenesis study

To study the structure of the pathway of cations across the Na, K-ATPase, we applied the substituted cysteine accessibility method to the putative 5th transmembrane segment of the alpha subunit of the Na,K-ATPase of the toad Bufo marinus. Only the most extracellular amino acid position (A(796)) was accessible from the extracellular side in the native Na,K-pump. After treatment with palytoxin, six other positions (Y(778), L(780), S(782), P(785), E(786) and L(791)), distributed along the whole length of the segment, became readily accessible to a small-size methanethiosulfonate compound (2-aminoethyl methanethiosulfonate). The accessible residues are not located on the same side of an alpha-helical model but the pattern of reactivity would rather suggest a beta-sheet structure for the inner half of the putative transmembrane segment. These results demonstrate the contribution of the 5th transmembrane segment to the palytoxin-induced channel and indicate which amino acid positions are exposed to the pore of this channel.     

Sieving experiments and pore diameter: it’s not a simple relationship

The classic sieving experiment for estimating an ion channel’s diameter with successively larger ions is re-examined. Using a very reduced model of a calcium channel, it is shown that sieving experiments measure a combination of three mechanisms: the cross-sectional area available to the sieving ions (the classic interpretation), the exclusion of the sieving ions from a pore crowded with amino acid side chains that protrude into the permeation pathway, and competitive selectivity of the sieving ions with other ions in the bath (even if those are present only at trace concentrations). The latter two can be called sieving-by-crowding because they stem from the excluded volume of the amino acids in the permeation pathway. The model shows that—to a first-order approximation—sieving experiments measure the available volume inside a selectivity filter, rather than the available cross-sectional area. The two are only the same if the narrow part of the pore does not have flexible amino acid side chains interacting directly with the permeant ions; this may be true of potassium channels, but not calcium, sodium, and other channels with “crowded” selectivity filters.     

Modeling of the outer vestibule and selectivity filter of the L-type Ca2+ channel

Using the KcsA bacterial K+ channel crystal structure [Doyle, D. A., et al. (1998) Science 280, 69-74] and the model of the outer vestibule of the Na+ channel [Lipkind, G. M., and Fozzard, H. A. (2000) Biochemistry 39, 8161-8170] as structural templates, we propose a structural model of the outer vestibule and selectivity filter of the pore of the Ca2+ channel (alpha1C or Ca(v)1.2). The Ca2+ channel P loops were modeled by alpha-helix-turn-beta-strand motifs, with the glutamate residues of the EEEE motif located in the turns. P loops were docked in the extracellular part of the inverted teepee structure formed by S5 and S6 alpha-helices with backbone coordinates from the M1 and M2 helices of the KcsA crystal structure. This construction results in a conical outer vestibule that tapers to the selectivity filter at the bottom. The modeled selectivity ring forms a wide open pore ( approximately 6 A) in the absence of Ca2+. When Ca2+ is present ( approximately 1 microM), all four glutamate side chains move to the center and form a cage around the dehydrated Ca2+ ion, blocking the pore. In the millimolar concentration range, Ca2+ also interacts with two low-affinity sites located externally and internally, which were modeled by the same carboxylate groups of the selectivity filter. Calculation of the resulting electrostatic potentials show that the single Ca2+ ion is located in an electrostatic trap. Only when three Ca2+ ions are bound simultaneously in the high- and low-affinity sites of the selectivity filter is Ca2+ able to overcome electrostatic attraction, permitting Ca2+ flux.     

Methanethiosulfonate Derivatives Inhibit Current through the Ryanodine Receptor/Channel

To identify regions of the ryanodine receptor (RyR) important for ion conduction we modified the channel with sulfhydryl-reacting compounds. After addition of methanethiosulfonate (MTS) compounds channel conductance was decreased while other channel properties, including channel regulation by ATP, caffeine, or Ca, were unaffected. The site of action was accessible to the MTS compounds from the cytoplasmic, but not the luminal, side of the channel. In addition, the hydrophilic MTS compounds were only effective when the channel was open, suggesting that the compounds covalently modify the channel from within the water-filled ion conducting pathway. The decrease in channel current amplitude occurred in a step-wise fashion and was irreversible and cumulative over time, eventually leading to the complete block of channel current. However, the time required for each consecutive modification during continuous exposure to the MTS compounds increased, suggesting that successive modification by the MTS compounds is not independent. These results are consistent with the hypothesis that the channel forms a wide vestibule on the cytoplasmic side and contains a much smaller opening on the luminal side. Furthermore, our results indicate that the MTS compounds can serve as functional markers for specific residues of the RyR to be identified in molecular studies.     

Low resistance, large dimension entrance to the inner cavity of BK channels determined by changing side-chain volume

Large-conductance Ca²⁺- and voltage-activated K⁺ (BK) channels have the largest conductance (250–300 pS) of all K⁺-selective channels. Yet, the contributions of the various parts of the ion conduction pathway to the conductance are not known. Here, we examine the contribution of the entrance to the inner cavity to the large conductance. Residues at E321/E324 on each of the four α subunits encircle the entrance to the inner cavity. To determine if 321/324 is accessible from the inner conduction pathway, we measured single-channel current amplitudes before and after exposure and wash of thiol reagents to the intracellular side of E321C and E324C channels. MPA⁻ increased currents and MTSET⁺ decreased currents, with no difference between positions 321 and 324, indicating that side chains at 321/324 are accessible from the inner conduction pathway and have equivalent effects on conductance. For neutral amino acids, decreasing the size of the entrance to the inner cavity by substituting large side-chain amino acids at 321/324 decreased outward single-channel conductance, whereas increasing the size of the entrance with smaller side-chain substitutions had little effect. Reductions in outward conductance were negated by high [K⁺]_i. Substitutions had little effect on inward conductance. Fitting plots of conductance versus side-chain volume with a model consisting of one variable and one fixed resistor in series indicated an effective diameter and length of the entrance to the inner cavity for wild-type channels of 17.7 and 5.6 Å, respectively, with the resistance of the entrance ∼7% of the total resistance of the conduction pathway. The estimated dimensions are consistent with the structure of MthK, an archaeal homologue to BK channels. Our observations suggest that BK channels have a low resistance, large entrance to the inner cavity, with the entrance being as large as necessary to not limit current, but not much larger.     

Trapping single ions inside single ion channels.

Single Ca++-activated K+ channels from rat muscle plasma membranes are inhibited by Ba++. A single Ba++ entering the channel's conduction pore induces a long-lived blocked state. This study employs Ba++ as a probe of the channel's conduction pathway to show that the channel can be forced to close with a single Ba++ ion inside the pore. A Ba++ ion inside the closed channel is trapped and cannot escape until the channel opens. The results demonstrate that in the channel's closed state, the cytoplasmic side of the conduction pore is obstructed to the passage of ions.     

Q/R site interactions with the M3 helix in GluK2 kainate receptor channels revealed by thermodynamic mutant cycles

RNA editing at the Q/R site near the apex of the pore loop of AMPA and kainate receptors controls a diverse array of channel properties, including ion selectivity and unitary conductance and susceptibility to inhibition by polyamines and cis-unsaturated fatty acids, as well as subunit assembly into tetramers and regulation by auxiliary subunits. How these different aspects of channel function are all determined by a single amino acid substitution remains poorly understood; however, several lines of evidence suggest that interaction between the pore helix (M2) and adjacent segments of the transmembrane inner (M3) and outer (M1) helices may be involved. In the present study, we have used double mutant cycle analysis to test for energetic coupling between the Q/R site residue and amino acid side chains along the M3 helix. Our results demonstrate interaction with several M3 locations and particularly strong coupling to substitution for L614 at the level of the central cavity. In this location, replacement with smaller side chains completely and selectively reverses the effect of fatty acids on gating of edited channels, converting strong inhibition of wild-type GluK2(R) to nearly 10-fold potentiation of GluK2(R) L614A.     

Pore size and negative charge as structural determinants of permeability in the Torpedo nicotinic acetylcholine receptor channel.

To gain an insight into the molecular basis of ion permeation mechanism through the nicotinic acetylcholine receptor (AChR) channel, we have determined permeability ratios of organic cations relative to Na+ of specifically mutated Torpedo californica AChR channels expressed in Xenopus oocytes. The mutations involved mainly the side chains of the amino acid residues in the intermediate ring, where mutations have been found to exert strong effects on single-channel conductance and ion selectivity among alkali metal cations. The results obtained reveal that both the size and the net charge of the side chains of the intermediate ring are involved in determining the permeability, and provide experimental evidence that the pore size at the intermediate ring is a critical determinant of permeability. Our findings further suggest that changes in net charge exert effects on permeability by affecting the pore size of the channel.     

How do calcium channels transport calcium ions?

Calcium channel activity is crucial for many fundamental physiological processes ranging from the heart beat to synaptic transmission. The channel-forming protein, of about 2000 amino acids, comprises four domains internally homologous to each other. Voltage-dependent Ca2+ channels are the most selective ion channels known. Under physiological conditions, they prefer Ca2+ over Na+ by a ratio of about 1000:1. To explain at the same time the exquisite ion selectivity and the large Ca2+ ion turnover rate of Ca2+ channels (approximately 3 x 10(6) ions/s), two kind models have been proposed. In one, the conduction pathway possesses two high-affinity binding sites. When two Ca2+ ions are bound to each site, the mutual repulsion between them speeds the exit rate for the ions, causing greater ion permeation through the pore. The second model hypothesizes the existence of a single site having a charged structure able to attract multiple, interacting ions, simultaneously. Recent studies that combine mutagenesis and electrophysiology show that the high-affinity binding site is formed by a ring of glutamate residues located in the pore forming region of the Ca2+ channel. As proposed in the second class of models, the results suggest that four glutamate residues, one glutamate donated by each repeat, combine to form a single high-affinity site. In this review the different conduction models for Ca2+ channels are discussed and confronted with structural data.     

A gating mutation in the internal pore of ASIC1a

Using a substituted cysteine accessibility scan, we have investigated the structures that form the internal pore of the acid-sensing ion channel 1a. We have identified the amino acid residues Ala-22, Ile-33, and Phe-34 in the amino terminus and Arg-43 in the first transmembrane helix, which when mutated into cysteine, were modified by intracellular application of MTSET, resulting in channel inhibition. The inhibition of the R43C mutant by internal MTSET requires opening of the channel. In addition, binding of Cd2+ ions to R43C slows the channel inactivation. This indicates that the first transmembrane helix undergoes conformational changes during channel inactivation. The effect of Cd2+ on R43C can be obtained with Cd2+ applied at either the extracellular or the intracellular side, indicating that R43C is located in the channel pore. The block of the A22C, I33C, and F34C mutants by MTSET suggests that these residues in the amino terminus of the channel also participate to the internal pore.     

Electrostatic and steric contributions to block of the skeletal muscle sodium channel by mu-conotoxin.

Pore-blocking toxins are valuable probes of ion channels that underlie electrical signaling. To be effective inhibitors, they must show high affinity and specificity and prevent ion conduction. The 22-residue sea snail peptide, mu-conotoxin GIIIA, blocks the skeletal muscle sodium channel completely. Partially blocking peptides, derived by making single or paired amino acid substitutions in mu-conotoxin GIIIA, allow a novel analysis of blocking mechanisms. Replacement of one critical residue (Arg-13) yielded peptides that only partially blocked single-channel current. These derivatives, and others with simultaneous substitution of a second residue, were used to elucidate the structural basis of the toxin's blocking action. The charge at residue-13 was the most striking determinant. A positive charge was necessary, though not sufficient, for complete block. Blocking efficacy increased with increasing residue-13 side chain size, regardless of charge, suggesting a steric contribution to inhibition. Charges grouped on one side of the toxin molecule at positions 2, 12, and 14 had a weaker influence, whereas residue-16, on the opposite face of the toxin, was more influential. Most directly interpreted, the data suggest that one side of the toxin is masked by close apposition to a binding surface on the pore, whereas the other side, bearing Lys-16, is exposed to an aqueous cavity accessible to entering ions. Strong charge-dependent effects emanate from this toxin surface. In the native toxin, Arg-13 probably presents a strategically placed electrostatic barrier rather than effecting a complete steric occlusion of the pore. This differs from other well-described channel inhibitors such as the charybdotoxin family of potassium channel blockers and the sodium channel-blocking guanidinium toxins (tetrodotoxin and saxitoxin), which appear to occlude the narrow part of the pore.     

Conduction properties of KcsA measured using brownian dynamics with flexible carbonyl groups in the selectivity filter

In the narrow segment of an ion conducting pathway, it is likely that a permeating ion influences the positions of the nearby atoms that carry partial or full electronic charges. Here we introduce a method of incorporating the motion of charged atoms lining the pore into Brownian dynamics simulations of ion conduction. The movements of the carbonyl groups in the selectivity filter of the KcsA channel are calculated explicitly, allowing their bond lengths, bond angles, and dihedral angels to change in response to the forces acting upon them. By systematically changing the coefficients of bond stretching and of angle bending, the carbon and oxygen atoms can be made to fluctuate from their fixed positions by varying mean distances. We show that incorporating carbonyl motion in this way does not alter the mechanism of ion conduction and only has a small influence on the computed current. The slope conductance of the channel increases by approximately 25% when the root mean-square fluctuations of the carbonyl groups are increased from 0.01 to 0.61 A. The energy profiles and the number of resident ions in the channel remain unchanged. The method we utilized here can be extended to allow the movement of glutamate or aspartate side chains lining the selectivity filters of other ionic channels.