Characterization of IS1474, an insertion sequence of the IS21 family isolated from Pseudomonas alcaligenes NCIB 9867

A new insertion sequence (IS) designated IS1474 was isolated from Pseudomonas alcaligenes NCIB 9867 (P25X). IS1474 is a 2632 bp element which showed a characteristic IS structure with 12 bp inverted repeats (IRs) flanking a 2608 bp central region. IS1474 contained four open reading frames (ORF1–ORF4), two in each orientation. Similarities were detected between ORF1 and ORF2 and the putative transposases of the IS21 family. Sequences upstream from IS1474 were found to display up to 89% homology with IS53 from Pseudomonas syringae suggesting that IS1474 had inserted into another related IS element designated IS1475. An open reading frame, ORF5, located at the junction of IS1474 and IS1475, showed similarities with the IstB protein of IS21 and could possibly be the transposase subunit of IS1475. Transposition assays showed that IS1474 transposed at a relatively low frequency leading to cointegration with target plasmids. Hybridization studies showed that IS1474 is present in at least 13 copies in the chromosome of P25X and one copy on its endogenous plasmid.     

IS<Emphasis Type="Italic">Rm31</Emphasis>, a new insertion sequence of the IS<Emphasis Type="Italic">66</Emphasis> family in<Emphasis Type="Italic"> Sinorhizobium meliloti</Emphasis>

Sinorhizobium meliloti natural populations show a high level of genetic polymorphism possibly due to the presence of mobile genetic elements such as insertion sequences (IS), transposons, and bacterial mobile introns. The analysis of the DNA sequence polymorphism of the nod region of S. meliloti pSymA megaplasmid in an Italian isolate led to the discovery of a new insertion sequence, ISRm31. ISRm31 is 2,803 bp long and has 22-bp-long terminal inverted repeat sequences, 8-bp direct repeat sequences generated by transposition, and three ORFs (A, B, C) coding for proteins of 124, 115, and 541 amino acids, respectively. ORF A and ORF C are significantly similar to members of the transposase family. Amino acid and nucleotide sequences indicate that ISRm31 is a member of the IS66 family. ISRm31 sequences were found in 30.5% of the Italian strains analyzed, and were also present in several collection strains of the Rhizobiaceae family, including S. meliloti strain 1021. Alignment of targets sites in the genome of strains carrying ISRm31 suggested that ISRm31 inserts randomly into S. meliloti genomes. Moreover, analysis of ISRm31 insertion sites revealed DNA sequences not present in the recently sequenced S. meliloti strain 1021 genome. In fact, ISRm31 was in some cases linked to DNA fragments homologous to sequences found in other rhizobia species.     

Isolation and Characterization of IS1416fromPseudomonas glumae,a New Member of the IS3Family

Isolation and characterization of four different insertion sequence (IS) elements fromPseudomonas glumaeMAFF 302744 through transposition into the entrapment vector pSHI1063 are described. One of the elements, IS1416,was further characterized. IS1416is 1322 bp long and carries 29-bp terminal inverted repeats flanked by a 3-bp direct duplication. IS1416contains three open reading frames (ORFs), which are designated ORFA1, ORFA2, and ORFB, on one strand. Both DNA sequence of IS1416and the deduced amino acid sequences of its ORFs strongly suggest that IS1416is a member of the IS3family, and is closely related to IS401fromPseudomonas cepaciaand IS51fromPseudomonas syringae.To our knowledge, IS1416is the first IS element isolated fromP. glumae.The gene organization and possible regulation of transposition functions of IS1416are also discussed.     

Factors determining the frequency of plasmid cointegrate formation mediated by insertion sequence IS3 from Escherichia coli.

Summary Transposition events mediated by plasmid-borne copies of the insertion sequence IS3 of Escherichia coli are difficult to detect because of a low frequency of cointegrate formation. We found that cointegration activity could be strongly enhanced by using plasmid constructions in which a second IS3 element, disabled by a large deletion, was placed adjacent to an intact IS3 copy. Attempts to construct plasmids containing two adjacent intact IS3 copies were unsuccessful, probably because of instability. Transpositional hyperactivity of tandemly duplicated IS sequences was previously described for spontaneous duplications of IS21 and IS30 and may well be a more general phenomenon. The frequency of cointegration events was also strongly increased in an E. coli strain deficient in Dam methylation, suggesting that IS3, like some other Dam site-containing IS elements, is regulated by the Dam methylation system. Insertion sites were strongly clustered within the target lambda repressor gene; however no sequence specificity determinants could be identified. All insertions analyzed carried the IS element in the same orientation; target sequence duplications were mostly 3 bp, but in some cases 4 by long. To obtain information about the roles of the open reading frames (ORFs) in IS3, we constructed plasmid-borne mutant elements in which potentially functional reading frames were inactivated by site-directed mutations; the mutants were introduced into partial tandem constructions and tested in cointegration assays. Mutations inactivating the putative initiation codons of ORF I and 11 in the intact element reduced insertion activity to less than 4% of the wild type, whereas the introduction of a termination codon into ORF IV had no effect on cointegration frequency. We conclude that translation of ORFs I and II is essential for cointegration activity and that the mutagenized ATG codons most probably serve as the normal initiation codons in the wild-type element. In contrast, ORF IV could either be non-functional or its gene product could be supplied in trans from chromosomal elements.     

Characterization of Insertions of IS476 and Two Newly Identified Insertion Sequences, IS1478 and IS1479, in Xanthomonas campestris pv. campestris

Thirty-two plasmid insertion mutants were independently isolated from two strains of Xanthomonas campestris pv. campestris in Taiwan. Of the 32 mutants, 14 (44%), 8 (25%), and 4 (12%) mutants resulted from separate insertions of an IS3 family member, IS476, and two new insertion sequences (IS), IS1478 and IS1479. While IS1478 does not have significant sequence homology with any IS elements in the EMBL/GenBank/DDBJ database, IS1479 demonstrated 73% sequence homology with IS1051 in X. campestris pv. dieffenbachiae, 62% homology with IS52 in Pseudomonas syringae pv. glycinea, and 60% homology with IS5 in Escherichia coli. Based on the predicted transposase sequences as well as the terminal nucleotide sequences, IS1478 by itself constitutes a new subfamily of the widespread IS5 family, whereas IS1479, along with IS1051, IS52, and IS5, belongs to the IS5 subfamily of the IS5 family. All but one of the IS476 insertions had duplications of 4 bp at the target sites without sequence preference and were randomly distributed. An IS476 insertion carried a duplication of 952 bp at the target site. A model for generating these long direct repeats is proposed. Insertions of IS1478 and IS1479, on the other hand, were not random, and IS1478 and IS1479 each showed conservation of PyPuNTTA and PyTAPu sequences (Py is a pyrimidine, Pu is a purine, and N is any nucleotide) for duplications at the target sites. The results of Southern blot hybridization analysis indicated that multiple copies of IS476, IS1478, and IS1479 are present in the genomes of all seven X. campestris pv. campestris strains tested and several X. campestris pathovars.     

Identification and characterisation of IS1383, a new insertion sequence isolated from Pseudomonas putida strain H

A new insertion sequence (IS1383) was identified on plasmids from Pseudomonas putida strain H and its nucleotide sequence was determined. IS1383 contains perfect terminal inverted repeats of 13-bp flanking a 1.4-kb internal sequence. A single significant open reading frame was identified that can encode a 342-amino acid polypeptide which was predicted to be highly basic and to have homology to polypeptides known from several other bacterial insertion sequences. At least six copies of IS1383 are present on the plasmids pPGH1 and pPGH2, whereas no copy could be detected on the chromosome of P. putida strain H. Target duplications did not flank the inverted repeats of any of the six IS1383 copies examined. Analysis of the integration sites of IS1383 revealed hints for a target specificity. Multiple sequence alignments of the transposases, the inverted repeats and the integration sites pointed to the assignment of IS1383 into a putative new family of insertion sequences defined as the IS1111 family.     

A New Insertion Variant, IS231I, Isolated from a Mosquito-Specific Strain of Bacillus thuringiensis

A new insertion variant belonging to the family IS231, designated IS231I, was isolated from a mosquito larvicidal strain of the Bacillus thuringiensis serovar sotto (H4ab). IS231I was 1653 bp long and delimited by two 20 bp inverted repeats with one mismatch, flanked by two perfect 11 bp direct repeats. The element contained a single open reading frame (ORF) encoding 478 amino acids and five conserved domains: N1, N2, N3, C1, and C2. The 5′ noncoding region upstream of the ORF, presumed to form a stable stem-and-loop structure, was highly conserved in IS231I. The secondary structure conformation had a deduced free energy (ΔG = 25°C) of −17.2 kcal/mol. Comparison of the IS231I amino acid sequence with those of the 10 existing IS variants revealed that the new variant shares 89% identity with IS231A and IS231B, 65–66% with IS231M and IS231N, and 38% with IS231W.     

Characterization of IS1389, a new member of the IS3 family of insertion sequences isolated from Xanthomonas campestris pv. amaranthicola

IS1389, a new insertion sequence belonging to the IS3 family, has been identified in Xanthomonas campestris pv. amaranthicola. The genome of this bacterium contains at least 11 copies of the element, whereas no hybridizing sequences were detected in other Xanthomonas species [X. axonopodis, X. fragaridae, X. phaseoli, and X. (Stenotrophomonas) maltophila]. Two nearly identical copies of the element (IS1389-A and IS1389-B) were characterized. According to analysis of sequence alignments and similar structural features, IS1389 belongs to the IS407 subgroup of the IS3 family, which duplicates 4 bp of target DNA upon insertion. IS1389-A was found in the proximity of the modification gene of the XamI restriction-modification system. Received: 17 November 1998 / Accepted: 22 April 1999     

Cloning and Nucleotide Sequence of a New Insertion Sequence, IS231N, from a Non-Serotypable Strain of Bacillus thuringiensis

A new IS231 variant, IS231N, has been isolated from an autoagglutinable, non-serotypable strain of B. thuringiensis. IS231N is 1654 bp in length and is delimited by two incomplete 20-bp inverted repeats (IR_L and IR_R) with two mismatches. No direct repeats (DRs) were found at the right and left borders of IS231N. Surprisingly, IS231N contains three open reading frames (ORFs) that could code for polypeptides of 329 (ORF1), 118 (ORF2), and 17 (ORF3) amino acids, respectively. IS231N lacks the 5th conserved amino acid domain, called C2, owing to the addition of an adenine residue at nucleotide 1319. IS231N shows the highest nucleotide identity (99%) with IS231M, another insertion sequence previously isolated from the same bacterial strain. IS231N, however, shares only 83% amino acid identity with IS231M because of nucleotide substitutions and additions. The ORF1 of IS231N has five fewer amino acids than ORF1 of IS231M. Furthermore, the ORF2-3 putative fusion product in IS231N contains eight fewer amino acids than ORF2 in IS231M. The dendrogram showing the evolutionary relationship between members of the IS231 family and IS231N indicates that IS231N is phylogenetically more closely related to IS231M (83%), followed by IS231F(74%), and is more distant from IS231V and W(46%). Received: 4 January 2001/Accepted: 6 February 2001     

Inactivation of the Serratia marcescens gene for the lipoprotein in Escherichia coli by insertion sequences, IS1 and IS5; sequence analysis of junction points

Summary A pBR322-derived plasmid pKEN221 carrying a Serratia marcescens lpp gene overproduces the outer membrane lipoprotein in an Escherichia coli lpp ^–cell. However, when this strain was continuously cultured in a rich medium for about thirty generations, many Lpp^– mutants were accumulated. Out of six mutants analyzed, three were found to carry insertion mutation in the lpp gene in pKEN221. From restriction enzyme mapping and hybridization analysis of the mutant plasmid DNA, it was found that two mutants were caused by insertion sequence IS1 and one by IS5. Nucleotide sequence analysis of these mutant DNAs revealed that both IS1 and IS5 insertions occured in the A-T rich 5 untranslated region of the lpp gene. While the IS1 insertion resulted in a direct duplication of a nine-base-pair sequence in the original pKEN221 DNA at the junction with IS1, the IS5 insertion resulted in a direct duplication of a four-base-pair sequence. IS5 was found to contain inverted-repeat sequences of twelve nucleotides at its exact ends. This is the first example of the nucleotide sequence analysis of an IS5 insertion mutation. By Southern blot hybridization, the E. coli chromosomal DNA was found to contain about ten copies of IS5.     

Cointegrate formation by IS50 requires multiple donor molecules

Summary The insertion sequence, IS50R, promotes cointegrate formation between a lambda::IS50R phage and the chromosome of Escherichia coli strain C. We show that formation of cointegrates mediated by IS50R between the non-replicating phage genome and the bacterial chromosome requires multiple donor molecules and depends on homologous recombination functions. We conclude that the two copies of IS50 present in the cointegrate originate in two different molecules. Thus, the existence of the cointegrate structure cannot be used as evidence for replication of IS50 sequences during IS50 transposition.     

IS231A insertion specificity: consensus sequence and DNA bending at the target site

In its natural host, Bacillus thuringiensis, the insertion sequence IS231A is preferentially inserted into the terminal inverted repeats of the transposon Tn4430. Using a novel transposition assay, we demonstrate that the Tn4430 ends behave as insertion hot spots for IS231A in Escherichia coli. Sequence analysis reveals that IS231A insertion sites match the 5′-GGG(N)₅CCC-3′consensus. However, this consensus is not the only determinant of IS231A insertion specificity. Although both Tn4430 ends have identical sequences, one is strongly preferred to the other and the orientation of insertion into this end is not random. We demonstrate that this preference is determined by the flanking regions of the site. These regions display a conserved periodic organization of their sequence which, by conferring anisotropic flexibility, would induce the DNA to bend in a roughly ‘S’ -shaped structure centred on the target consensus. DNA conformation analysis by polyacrylamide gel electrophoresis indeed shows that the preferred target site of IS231A is flanked by DNA segments curved in opposite directions. We present a model in which DNA bendability and curvature would contribute to the positioning of IS231A transposase on the target DNA.     

Role of IS1 in the conversion of virulence (Vi) antigen expression in Enterobacteriaceae

Summary When Escherichia coli HB101 harbors pWR127, a plasmid comprising the viaB gene from Citrobacter freundii WR7004 and the ColEl-derived pACKC1, the strain produces the virulence (Vi) antigen. Vi antigen expression is abolished (Vi^– phenotype), however, when an IS1 or IS1-like DNA element inserts into the viaB region. To determine the sites of IS1 insertion, pWR127 DNAs extracted from 95 independently isolated Vi^– strains were analyzed by digestion with the restriction endonuclease PstI and agarose gel electrophoresis. Ten insertion sites were found distributed nonrandomly in an area of about 1.3 kb. Nine Vi⁺ strains (two Citrobacter, two E. coli, and five Salmonella strains), four of which contain pWR127, were then tested for the presence of IS1 by DNA-DNA hybridization. Of the nine strains, five were stable Vi⁺ and did not contain IS1. The other four which generated Vi^– strains, contained IS1. When pRR134, a plasmid that contains IS1 was transferred into a stable Vi⁺ Salmonella typhimurium strain carrying pWR127 (OU5140), Vi^– strains were produced from which pWR127 derivatives carrying IS1 inserts could be isolated. It appears, therefore, that the presence of an IS1I or IS1-like element in a strain is required for conversion of the Vi⁺ expression state to the Vi^– expression state.     

IS1549 from Mycobacterium smegmatis Forms Long Direct Repeats upon Insertion

A new insertion element, IS1549, was identified serendipitously from Mycobacterium smegmatis LR222 during experiments using a vector designed to detect the excision of IS6110 from between the promoter region and open reading frame (ORF) of an aminoglycoside phosphotransferase gene. Six of the kanamycin-resistant isolates had a previously unidentified insertion element upstream of the ORF of the aph gene. The 1,634-bp sequence contained a single ORF of 504 amino acids with 85% G+C content in the third codon position. The putative protein sequence showed a distant relationship to the transposase of IS231, which is a member of the IS4 family of insertion elements. IS1549 contains 11-bp terminal inverted repeats and is characterized by the formation of unusually long and variable-length (71- to 246-bp) direct repeats of the target DNA during transposition. Southern blot analysis revealed that five copies of IS1549 are present in LR222, but not all M. smegmatis strains carry this element. Only strains with a 65-kDa antigen gene with a PCR-restriction fragment length polymorphism type identical to that of M. smegmatis 607 contain IS1549. None of 13 other species of Mycobacterium tested by PCR with two sets of primers specific for IS1549 were positive for the expected amplified product.     

Characterization of the Cryptic Plasmids of thePseudomonas alcaligenesType Strain

The species type strain ofPseudomonas alcaligenescontains three small cryptic plasmids (designated pECB1, 2, and 3) of 7740, 4480, and 2700 bp, respectively. Partial restriction enzyme maps have been constructed for pECB1 and 2 which on this basis do not appear to be related. pECB3 proved refractile to cutting with commonly used restriction enzymes, though it was completely rendered by those enzymes which recognize 4-bp sequences containing only G + C. This suggested that pECB3 is especially rich in these bases. Hybridization studies using labeled pECB2 as probe revealed homology with pECB3 and with regions of the bacterial chromosome, but not with pECB1. A 1214-bp region of pECB2 showed great sequence similarity to the basic replicon of pPS10, a 10-kbPseudomonas-specific plasmid isolated fromPseudomonas syringaepv.savastonoi.The putative replicon (including the gene for a replication protein) was subcloned and both DNA strands were sequenced. Introduction of the putative replicon into theEscherichia coliplasmid pUC19 created a recombinant vector able to replicate in bothE. coliandPseudomonasspp. Minicell analyses did not reveal any peptides which could be attributed to the remaining region of pECB2 or to pECB1—a finding supported by sequencing studies. Attempts at plasmid curing were unsuccessful. A phenotypic comparison with a non-plasmid-harboring strain ofP. alcaligenes,based on nutritional versatility and antibiotic susceptibility, revealed a single difference of note: the type strain alone was able to utilize benzoate for growth. Transformation of the non-harboring strain with pECB1–3, followed by selection on a minimal medium containing benzoate, gave no colonies. The advantages gained by possession of pECB1–3, if any, are at present unknown.     

Genetic organization and transposition properties of IS 511

IS511 is an endogenous insertion sequence (IS) of the bacterium Caulobactercrescentus strain CB15 and it is the first Caulobacter IS to be characterized at the molecular level. We determined the 1266-bp nucleotide sequence of IS511 and investigated its genetic organization, relationship to other ISs, and transposition properties. IS511 belongs to a distinct branch of the IS3 family that includes ISRI, IS476, and IS1222, based on nucleotide sequence similarity. The nucleotide sequence of IS511 encodes open reading frames (orfs) designated here as orfA and orfB, and their relative organization and amino acid sequences of the predicted protein products are very similar to those of orfAs and orfBs of other IS3 family members. Nuclease S1 protection assays identified an IS511 RNA, and its 5′ end maps approximately 16 nucleotides upstream of orfA and about six nucleotides downstream of a sequence that is similar to the consensus sequence of C. crescentus housekeeping promoters. Evidence is presented that IS511 is capable of precise excision from the chromosome, and transposition from the chromosome to a plasmid. Transpositional insertions of IS511 occurred within sequences with a relatively high G + C content, and they were usually, but not always, flanked by a 4-bp direct repeat that matches a sequence at the site of insertion. We also determined the nucleotide sequence flanking the four endogenous IS511 elements that reside in the chromosome of C. crescentus. Our findings demonstrate that IS511 is a transposable IS that belongs to a branch of the IS3 family. Received: 18 August 1996 / Accepted: 17 September 1996     

Cointegrates between bacteriophage P1 DNA and plasmid pBR322 derivatives suggest molecular mechanisms for P1-mediated transduction of small plasmids

Summary We characterized cointegrates formed in an Escherichia coli rec ^– strain between bacteriophage P1 genomes and small plasmids related to pBR322. The partners were, on the one hand, either phage P1 DNA, which carries one copy of IS1, or phage P1-15 DNA, a derivative which lacks the IS1, and, on the other hand, plasmids containing either a split IS1 or no IS1. In the presence of IS1 sequences on both partners, cointegrates were usually formed by reciprocal recombination between IS1 sequences. Cointegrates between P1 and a plasmid carrying no IS1 sequence were formed by transpositional cointegration mediated by IS1 of P1. Cointegrates between P1-15 and small plasmids containing a split IS1 were formed by one of three ways: (a) acquisition of an IS1 by P1-15 followed by reciprocal recombination between IS1 sequences, (b) transpositional cointegration mediated by the split IS1 element, Tn2657, or (c) involvement of the invertible segment carried on P1-15 DNA. Most cointegrates segregated into the small plasmids and phage P1 derivatives. A comparison of the phenomena studied and of their frequencies allowed us to conclude that cointegrate formation is a molecular mechanism involved in the transduction of plasmids smaller than those packageable into P1 virions, although it does not seem to be the only process used.     

MiniUIB,a Novel Minitransposon-Based System for Stable Insertion of Foreign DNA into the Genomes of Gram-Negative and Gram-Positive Bacteria

Transposition of the insertion sequence (IS) ISPpu12 is actively induced after conjugative interaction. The transposase of this IS can act in trans on structures flanked by inverted repeats similar to those of the transposon. Based on that fact, an ISPpu12-based minitransposon, miniUIB, has been constructed in order to biotechnologically exploit the self-regulation of ISPpu12 and its increased activity after conjugative interaction. Mobilization of the miniUIB structure into the genome of Pseudomonas stutzeri AN10 after conjugative interaction was demonstrated. A single gene, i.e., the kanamycin resistance determinant, or large genetic structures of >12 kb, i.e., alkBFGHJKL and alkST operons of Pseudomonas putida TF4-1L (GPo1), have been easily integrated in P. stutzeri AN10 by an RP4-based delivery system. Therefore, the integration of the alk determinants by use of the miniUIB system has extended the biodegradation capabilities of this strain. Plasmid pJOC100, containing the transposase and regulator genes of ISPpu12 adjacent to the miniUIB structure, was constructed in order to extend the host range of this biotechnologically useful genetic tool to other model and real-world bacteria. The effectiveness of the system for random mutagenesis in a phylogenetic wide range of bacteria and for the insertion of novel functions has been demonstrated, even in successive steps.     

Isolation, characterization and transposition of an (IS2)2 intermediate

We have isolated and characterized a dimer derivative of the extensively studiedEscherichia coli insertion sequence IS2. The dimer structure — called (IS2)₂ — consists of two IS2 elements arranged as a direct repeat, separated by 1 bp. The junction between the (IS2)₂ dimer and target sequences is located at various positions in independent isolates; however, one position was preferred. The transposition of (IS2)₂ into a target plasmid resulted in cointegrate-type structures. The transposition frequency of the (IS2)₂ dimer itself was significantly higher than that of the isogenic monomer IS2 insertion. The poor stability and high activity of (IS2)₂ indicates that this is an active transposition intermediate. The mode of transposition of (IS2)₂ is analogous to the joined dimer model described in the case of (IS21)₂ and (IS30)₂.     

Conjugative Interaction Induces Transposition of ISPst9 in Pseudomonas stutzeri AN10

ISPst9 is an ISL3-like insertion sequence (IS) that was recently described in the naphthalene-degrading organism Pseudomonas stutzeri strain AN10. In this paper we describe a novel strong IS regulation stimulus; transposition of ISPst9 is induced in all P. stutzeri AN10 cells after conjugative interaction with Escherichia coli. Thus, we observed that in all P. stutzeri AN10 cells that received genetic material by conjugation the ISPst9 genomic dose and/or distribution was changed. Furthermore, ISPst9 transposition was also observed when P. stutzeri AN10 cells were put in contact with the plasmidless conjugative strain E. coli S17-1λ_pir, but not when they were put in contact with E. coli DH5α (a nonconjugative strain). The mechanism of ISPst9 transposition was analyzed, and transposition was shown to proceed by excision from the donor DNA using a conservative mechanism, which generated 3- to 10-bp deletions of the flanking DNA. Our results indicate that ISPst9 transposes, forming double-stranded DNA circular intermediates consisting of the IS and a 5-bp intervening DNA sequence probably derived from the ISPst9 flanking regions. The kinetics of IS circle formation are also described.