Bis (monoacylglycero) phosphate interfacial properties and lipolysis by pancreatic lipase-related protein 2, an enzyme present in THP-1 human monocytes

The interfacial physical properties of bis(monoacylglycero)phosphate (BMP) and its derivatives with three oleoyl chains (hemi-BDP) and four oleoyl chains (bis(diacylglycero)phosphate, BDP) were investigated using Langmuir monomolecular films. The mean molecular area of BMP at the collapse surface pressure (45mN m(-1)) was similar to those measured with other phospholipids bearing two acyl chains (66 and 59.6?(2) molecule(-1) at pH 5.5 and 8.0, respectively). In Hemi-BDP and BDP, the mean molecular area increased by 26 and 35?(2) molecule(-1) per additional acyl chain at pH 5.5 and 8.0, respectively. When BMP was added to a phospholipid mixture mimicking late endosome membrane composition at pH 8.0, the mean phospholipid molecular area increased by 7% regardless of the surface pressure. In contrast, the variation in molecular area was surface pressure-dependent at pH 5.5, a pH value close to that of intra-endosomal content. BMP and hemi-BDP, but not BDP, were hydrolyzed by pancreatic lipase-related protein 2 (PLRP2), which exhibits phospholipase A(1) activity. At pH 5.5, the maximum activities of PLRP2 on BMP were recorded at high surface pressures (25-35mN/m). At pH 8.0, the PLRP2 activity vs. surface pressure showed a bell-shaped curve with maximum activities at 15mN/m for both BMP and hemi-BDP. This is a new activity for this enzyme which could degrade cellular BMP since both human PLRP2 (HPLRP2) and BMP were localized in human monocytic THP-1 cells. This is the first report on the cellular localization of HPLRP2 in human monocytes.     

Interaction of cholesterol with sphingomyelins and acyl-chain-matched phosphatidylcholines: a comparative study of the effect of the chain length.

In this study we have synthesized sphingomyelins (SM) and phosphatidylcholines (PC) with amide-linked or sn-2 linked acyl chains with lengths from 14 to 24 carbons. The purpose was to examine how the chain length and degree of unsaturation affected the interaction of cholesterol with these phospholipids in model membrane systems. Monolayers of saturated SMs and PCs with acyl chain lengths above 14 carbons were condensed and displayed a high collapse pressure ( approximately 70 mN/m). Monolayers of N-14:0-SM and 1(16:0)-2(14:0)-PC had a much lower collapse pressure (58-60 mN/m) and monounsaturated SMs collapsed at approximately 50 mN/m. The relative interaction of cholesterol with these phospholipids was determined at 22 degreesC by measuring the rate of cholesterol desorption from mixed monolayers (50 mol % cholesterol; 20 mN/m) to beta-cyclodextrin in the subphase (1.7 mM). The rate of cholesterol desorption was lower from saturated SM monolayers than from chain-matched PC monolayers. In SM monolayers, the rate of cholesterol desorption was very slow for all N-linked chains, whereas for PC monolayers we could observe higher desorption rates from monolayers of longer PCs. These results show that cholesterol interacts favorably with SMs (low rate of desorption), whereas its interaction (or miscibility) with long chain PCs is weaker. Introduction of a single cis-unsaturation in the N-linked acyl chain of SMs led to faster rates of cholesterol desorption as compared with saturated SMs. The exception was monolayers of N-22:1-SM and N-24:1-SM from which cholesterol desorbed almost as slowly as from the corresponding saturated SM monolayers. The results of this study suggest that cholesterol is most likely capable of interacting with all physiologically relevant (including long-chain) SMs present in the plasma membrane of cells.     

Archaeal lipids forming a low energy-surface on air-water interface

Archaea or archaebacteria are the microorganism living in extreme environments such as hot springs and salt lakes. The membrane is featured universally by lipids which possess saturated polyisoprenoid chains in the hydrophobic moiety. This paper concerns the surface properties of Langmuir membranes made of archaeal lipid models (AL) bearing a phytanyl group or (3RS, 7R, 11R)-3,7,11,15-tetramethylhexadecyl group. All of the AL provide a Langmuir membrane on an air-water interface with an abnormally low surface tension (32-37 mN/m at 20-70 degrees C), while the conventional lipids having n-alkyl chains give membranes of 54-56 mN/m. The abnormally low energy surface of AL lipids is considered to arise from the bulky and fluid polyisoprenoid chain.     

Mitochondrial creatine kinase interaction with heterogeneous monolayers: Effect on lipid lateral organization

Our study highlights the tight relationship between protein binding to monolayers and the phase-state of the phospholipids. Interaction of mitochondrial creatine kinase with phospholipidic membranes was analysed using a two-phase monolayer system containing anionic phospholipids under chain mismatch conditions. Monolayers were made up of mixtures of DMPC/DPPG or DPPC/DMPG containing 40% negatively charged phospholipids which is approximately the negative charge content of the mitochondrial inner membrane. Langmuir isotherms of these monolayers showed that they underwent a phase transition from a liquid expanded state to a liquid-condensed phase at about 2 mN/m and 5 mN/m respectively. Interface morphology modifications caused by injection of mtCK under these monolayers at low or high surface pressure were monitored by Brewster angle microscopy. This work provides evidence that the presence at the air/water interface of discrete domains with increased charge density, may lead to difference in partition of soluble proteins such as mtCK, interacting with the lipid monolayer. Conversely these proteins may help to organize charged phospholipid domains in a membrane.     

Adsorption of apolipoprotein A-IV to phospholipid monolayers spread at the air/water interface. A model for its labile binding to high density lipoproteins.

The mechanisms that mediate the labile binding of apolipoprotein A-IV (apoA-IV) to high density lipoproteins (HDL) are not known. We therefore used a surface balance and surface radioactivity detector to investigate the adsorption of apoA-IV to egg phosphatidylcholine monolayers spread at the air/water interface. ApoA-IV bound rapidly and reversibly to phospholipid monolayers and generated a maximum increase in surface pressure of 19 millinewtons (mN)/m at a subphase concentration of 2 x 10(-5) g/dl. Binding decreased linearly with increasing initial surface pressure; at pressures greater than 28-29 mN/m, apoA-IV could no longer penetrate the lipid monolayer. The area occupied by the amino acid residues in apoA-IV reached an unusually low limiting molecular area of 10-12 A2/residue at surface saturation. The surface pressure of native HDL3 was calculated to be 33 mN/m, and it rapidly decreased with the action of lecithin:cholesterol acyltransferase on the particle surface. We conclude that the surface activity of apoA-IV is lower than that of any other human apolipoprotein; its binding and surface conformation are particularly sensitive to pressure; and at saturation, a significant portion of the molecule is excluded from the interface. The exclusion pressure of apoA-IV may be only slightly lower than the surface pressure of HDL; in vivo, the action of lecithin:cholesterol acyltransferase and lipid transfer proteins may cause the HDL3 surface pressure to oscillate about a narrow range that spans the exclusion pressure of apoA-IV. The resultant labile association of apoA-IV and HDL may be of central importance to its role in lipoprotein metabolism.     

Calcium-mediated DNA adsorption to yeast cells and kinetics of cell transformation by electroporation.

The interfacial elastic packing interactions of different galactosylceramides (GalCers), sphingomyelins (SMs), and phosphatidylcholines (PC) were compared by determining their elastic area compressibility moduli (Cs-1) as a function of lateral packing pressure (pi) in a Langmuir-type film balance. To assess the relative contributions of the lipid headgroups as well as those of the ceramide and diacylglycerol hydrocarbon regions, we synthesized various GalCer and SM species with identical, homogeneous acyl residues and compared their behavior to that of PCs possessing similar hydrocarbon structures. For PCs, this meant that the sn-1 acyl chain was long and saturated (e.g., palmitate) and the sn-2 chain composition was varied to match that of GalCer or SM. When at equivalent pi and in either the chain-disordered (liquid-expanded) or chain-ordered (liquid-condensed) state, GalCer films were less elastic than either SM or PC films. When lipid headgroups were identical (SM and PC), Cs-1 values (at equivalent pi) for chain-disordered SMs, but not chain-ordered SMs, were 25-30% higher than those of PCs. Typical values for fluid phase (liquid-expanded) GalCer at 30 mN/m and 24 degrees C were 158 (+/- 7) mN/m, whereas those of SM were 135 (+/- 7) mN/m and those of PC were 123 (+/- 2) mN/m. Pressure-induced transitions to chain-ordered states (liquid-condensed) resulted in significant increases (two- to fourfold) in the "in-plane" compressibility for all three lipid types. Typical Cs-1 values for chain-ordered GalCers at 30 mN/m and 24 degrees C were between 610 and 650 mN/m, whereas those of SM and of PC were very similar and were between 265 and 300 mN/m. Under fluid phase conditions, the pi-Cs-1 behavior for each lipid type was insensitive to whether the acyl chain was saturated or monounsaturated. Measurement of the Cs-1 values also provided an effective way to evaluate the two-dimensional phase transition region of SMs, GalCers, and PCs. Modest heterogeneity in the acyl composition led to transitional broadening. Our findings provide useful information regarding the in-plane elasticity of lipids that are difficult to investigate by alternative methods, i.e., micropipette aspiration technique. The results also provide insight into the stability of sphingolipid-enriched, membrane microdomains that are thought to play a role in the sorting and trafficking of proteins containing glycosylphosphatidylinositol anchors with cells.     

Ubiquinones have surface-active properties suited to transport electrons and protons across membranes

Surface-active properties of ubiquinones and ubiquinols have been investigated by monomolecular-film techniques. Stable monolayers are formed at an air/water interface by the fully oxidized and reduced forms of the coenzyme; collapse pressures and hence stability of the films tend to increase with decreasing length of the isoprenoid side chain and films of the reduced coenzymes are more stable than those of their oxidized counterparts. Ubiquinone with a side chain of two isoprenoid units does not form stable monolayers at the air/water interface. Mixed monolayers of ubiquinol-10 or ubiquinone-10 with 1,2-dimyristoyl phosphatidylcholine, soya phosphatidylcholine and diphosphatidylglycerol do not exhibit ideal mixing characteristics. At surface pressures less than the collapse pressure of pure ubiquinone-10 monolayers (approx. 12mN.m(-1)) the isoprenoid chain is located substantially within the region occupied by the fatty acyl residues of the phospholipids. With increasing surface pressure the ubiquinones and their fully reduced equivalents are progressively squeezed out from between the phospholipid molecules until, at a pressure of about 35mN.m(-1), the film has surface properties consistent with that of the pure phospholipid monolayer. This suggests that the ubiquinone(ol) forms a separate phase overlying the phospholipid monolayer. The implications of this energetically poised situation, where the quinone(ol) is just able to penetrate the phospholipid film, are considered in terms of the function of ubiquinone(ol) as electron and proton carriers of energy-transducing membranes.     

Interaction of a substance P agonist and of substance P antagonists with lipid membranes. A thermodynamic analysis.

The molecular characteristics of the neuropeptide substance P (SP), its agonist [Sar9,Met-(O2)11]SP, and three of its antagonists [D-Arg1,D-Pro2,D-Trp7,9,Leu11]SP, [D-Arg1,D-Trp7,9,Leu11]SP, and [D-Pro2,D-Trp7,9]SP were investigated at the air/water interface and when bound to lipid monolayers and bilayers. Measurement of the Gibbs adsorption isotherm showed that the surface areas of SP and its agonist (240 +/- 5 A2 at biologically relevant concentrations) were distinctly larger than those of the antagonists (138 +/- 5 A2) [Seelig, A. (1990) Biochim. Biophys. Acta 1030, 111-118]. The surface activity of the peptides increased in the order [Sar9,Met(O2)11]SP less than SP less than [D-Pro2,D-Trp7,9]SP less than [D-Arg1,D-Trp7,9,Leu11]SP = [D-Arg1,D- Pro2,D-Trp7,9,Leu11]SP and correlated with the respective binding affinities to lipid membranes. The agonist did not insert into neutral and negatively charged bilayers or into densely packed lipid monolayers (at surface pressures greater than 31 mN/m). In contrast, the three antagonists gave rise to a strong binding both to neutral and to charged lipid monolayers and bilayers. The degree of binding was evaluated from the area increase of lipid monolayers upon peptide insertion, and the binding isotherms were analyzed in terms of the Gouy-Chapman theory. At the monolayer-bilayer equivalence pressure of approximately 32 mN/m, the binding can be described by a surface partition equilibrium with binding constants of (4.5 +/- 0.1) x 10(3) M-1 for [D-Pro2,D-Trp7,9]SP and (1.3 +/- 0.1) x 10(4) M-1 for both [D-Arg1,D-Trp7,9,Leu11]SP and [D-Arg1,D-Pro2,D-Trp7,9,Leu11]SP for pure palmitoyloleoylphosphatidylcholine (POPC) membranes.(ABSTRACT TRUNCATED AT 250 WORDS)     

In vitro effect of gamma-aminobutyric acid on bovine spermatozoa capacitation

Sperm capacitation is defined as the maturational changes that render a sperm competent for fertilization and occurs in the female reproductive tract. Identification of the factor/s that regulate sperm capacitation would allow the understanding of these phenomena. Among these factors, gamma-aminobutyric acid (GABA) has recently become as a putative modulator of sperm function. The aim of this study was to explore the presence of a GABAergic regulation of bovine sperm capacitation as well as the possible intracellular mechanisms involved. GABA was detected in fresh semen by a sensitive radioreceptor assay (spermatozoa, 0.064 +/- 0.003 nmoles/10(6) cells; seminal plasma, 23.21 +/- 1.16 nmoles/ml). Scatchard analysis of [(3)H]-muscimol binding to sperm membranes yielded a linear plot consistent with a single population of binding sites (K(d) = 3.87 nM, B(max) = 417 fmol/mg prot.). [(3)H]-muscimol specific binding to sperm membranes was significantly inhibited by the GABA A receptor (GABA A-R) antagonist bicuculline and by the agonists muscimol and isoguvacine. Addition of GABA to the incubation medium resulted in a concentration-dependent increase in the percentage of capacitated spermatozoa (chlortetracycline assay). We observed a significant increment on intracellular calcium and cyclic 3',5' adenosine monophosphate (cAMP) concentrations induced by GABA, being the cation influx abolished when the cell suspensions were coincubated with the antagonists bicuculline or picrotoxin. It is concluded that GABA induces sperm capacitation through an intracellular mechanism dependent on calcium influx and cAMP accumulation mediated by a specific GABA A-R.     

Peptide binding to lipid bilayers. Binding isotherms and zeta-potential of a cyclic somatostatin analogue

The binding of the cyclic somatostatin analogue SMS 201-995, (+)-D-Phe1-Cys2-Phe3-D-Trp4-(+)-Lys5-Thr6- Cys7-Thr(ol)8, to neutral and negatively charged lipids was investigated with a centrifugation assay and with electrophoretic and monolayer methods. Monolayers and bilayers were composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), either in pure form or in a 75/25 (mol/mol) mixture. The expansion of monolayer films demonstrated the intercalation of the peptide between the lipid molecules with a surface area requirement of 135 A2 per peptide molecule, indicating a parallel alignment of the peptide long axis with the membrane surface. Above a limiting pressure of 32.5 mN/m for POPC and 38.5 mN/m for POPG, peptide penetration was no longer possible. The peptide binding isotherm could be measured for mixed POPC/POPG bilayers up to a peptide concentration of 0.5 mM. Due to electrostatic attraction, binding between the positively charged peptide and the negatively charged membrane surface was enhanced as compared to the binding to a neutral membrane. After correction for electrostatic effects by means of the Gouy-Chapman theory, the binding isotherm as well as the electrophoretic zeta-potential measurement could be described by the same partition equilibrium with a surface partition constant of Kp = 36 +/- 4 M-1 (at 0.1 M NaCl). About 60-70% of SMS 201-995 is probably embedded in the headgroup region with little penetration into the lipid core. The partition constant increases with increasing salt concentration or with decreasing lipid lateral pressure.(ABSTRACT TRUNCATED AT 250 WORDS)     

Hisactophilin-mediated binding of actin to lipid lamellae: a neutron reflectivity study of protein membrane coupling.

The neutron reflectivity technique is applied to determine the adsorptive interaction of the 13.5-kDa actin-binding protein hisactophilin from Dictyostelium discoideum with lipid monolayers at a lateral pressure of 21 mN/m < or = pi < or = 25 mN/m at the air-water interface. We compare binding of natural hisactophilin exhibiting a myristic acid chain membrane anchor at the N-terminus (DIC-HIS) and a fatty acid-deficient genetic product expressed in Escherichia coli (EC-HIS). It is demonstrated that only the natural hisactophilin DIC-HIS is capable of mediating the strong binding of monomeric actin to the monolayer, where it forms a layer of about 40 A thickness corresponding to the average diameter of actin monomers. Monolayers composed of pure dimyristoyl phosphatidylcholine with fully deuterated hydrocarbon tails and headgroup (DMPC-d67) and 1:1 mixtures of this lipid with chain deuterated dimyristoyl phosphatidylglycerol (DMPG-d54) are studied on subphases consisting either of fully deuterated buffer (D2O) or of a 9:1 H2O/D2O buffer that matches the scattering length density of air (CMA buffer). The reflectivity data are analyzed in terms of layer models, consisting of one to three layers, depending on the contrast of the buffer and the system. We show that both protein species bind tightly to negatively charged 1:1 DMPC-d67/DMPG-d54 monolayers, thereby forming a thin and most probably monomolecular protein layer of 12-15 A thickness. We find that the natural protein (DIC-HIS) partially penetrates into the lipid monolayer, in contrast to chain-deficient species (EC-HIS), which forms only an adsorbed layer. The coverage of the monolayer with DIC-HIS strongly depends on the presence of anionic DMPG in the monolayer. At a bulk protein concentration of 1.5 micrograms/ml, the molar ratio of bound protein to lipid is about 1:45 for the 1:1 lipid mixture but only 1:420 for the pure DMPC.     

Estimation of disk membrane lateral pressure and molecular area of rhodopsin by the measurement of its orientation at the nitrogen-water interface from an ellipsometric study

The internal lateral pressure of a bilayer has been estimated by numerous investigators. Most of these measurements were made by using the monolayer technique. In our approach, the disk membrane lateral pressure was estimated by assuming that this value is equal to the surface pressure necessary to maintain the transmembrane orientation of rhodopsin. The orientation of rhodopsin at the nitrogen-water interface was determined by using ellipsometry, which can measure the thickness of the film. By examining surface pressure and ellipsometric isotherms of intact and partially hydrolyzed rhodopsin, we have determined that a lateral pressure of 38 mN/m is necessary to give rhodopsin its natural transmembrane orientation and that surface pressures exceeding 45 mN/m lead to the formation of multilayers in the disk membrane film. At 38 mN/m, pure rhodopsin is found to have a molecular area of 2300 A2.     

Adsorption of gamma-aminobutyric acid to phosphatidylserine membranes.

The interaction of the negatively-charged phosphatidylserine (PS) and gamma-Aminobutyric acid (GABA) is examined in black lipid membranes (BLM) and inverse micelles. GABA does not permeate through PS membranes and, in concentrations of 10(-5)-10(-4) M, it reduces the negative potential at the membrane-aqueous solution interface. The effect is owing to the adsorption of the GABA cationic species and the consequent decrease of the negative surface charge density of the membrane. When the intrinsic pH of the membrane-solution interface is considered, the Gouy-Chapman-Stern theory describes the GABA screening effect and makes it possible to calculate the GABA-PS binding constant. This value is compared with that obtained measuring the partition of 14C-GABA between an organic phase containing PS and the aqueous solution. The results presented strongly suggest that the electrostatic force plays a major role in GABA-PS interaction.     

Natural terpenes: self-assembly and membrane partitioning

Monoterpenes (MTs) are highly hydrophobic substances present in essential oils. They cover a wide spectrum of biological effects with a membrane interaction as a common point. Here we studied the surface activity of camphor, cineole, thymol, menthol and geraniol, and their ability to reach and incorporate into model membranes affecting some features of their dynamic organization. All the MTs studied self-aggregated in water with critical micellar concentrations (CMC) between 3 and 8 microM. Their octanol-water and membrane-water partition coefficients were correlated with one another. They all penetrated in monomolecular layers of dipalmitoyl-phosphatildylcholine at the air-water interface, even at surface pressures (pi) above the equilibrium lateral pressure of bilayers; thymol exhibited the highest (61.3 mN/m) and camphor the lowest (37 mN/m) pi(cut-off) value. They affected the self-aggregation of Triton X-100, increasing its CMC from 0.16 mM in the absence of MTs up to 0.68 mM (e.g. for geraniol), and the topology of sPC vesicles, increasing its surface curvature, suggesting their location at the polar head group region of the membrane. The latter was supported by their ability to increase differentially the polarity of the membrane environment sensed by two electrochromic dyes. Dipole moment values (between 1.224 and 2.523 D) and solvation areas (between 80 and 97 A(2)) were calculated from their energy-minimized structures. The relative contribution of each experimental, theoretical and structural property to determine MTs' effects on membrane dynamics were evaluated by a principal component analysis.     

Persistence of phase coexistence in disaturated phosphatidylcholine monolayers at high surface pressures

Prior reports that the coexistence of the liquid-expanded (LE) and liquid-condensed (LC) phases in phospholipid monolayers terminates in a critical point have been compromised by experimental difficulties with Langmuir troughs at high surface pressures and temperatures. The studies reported here used the continuous interface of a captive bubble to minimize these problems during measurements of the phase behavior for monolayers containing the phosphatidylcholines with the four different possible combinations of palmitoyl and/or myristoyl acyl residues. Isothermal compression produced surface pressure-area curves for dipalmitoyl phosphatidylcholine (DPPC) that were indistinguishable from previously published data obtained with Langmuir troughs. During isobaric heating, a steep increase in molecular area corresponding to the main LC-LE phase transition persisted for all four compounds to 45 mN/m, at which collapse of the LE phase first occurred. No other discontinuities to suggest other phase transitions were apparent. Isobars for DPPC at higher pressures were complicated by collapse of the monolayer, but continued to show evidence up to 65 mN/m for at least the onset of the LC-LE transition. The persistence of the main phase transition to high surface pressures suggests that a critical point for these monolayers of disaturated phospholipids is either nonexistent or inaccessible at an air-water interface.     

Interaction of amyloid beta-(1-40) peptide with model membranes

The amyloid beta (1-40) peptide (A beta) is the main component of amyloid deposits found in the brain of patients afflicted with Alzheimer's disease. After treatment with hexafluoroisopropanol, commercial A beta is readily soluble in water and buffers at pH 7.4 and has an irregular secondary structure. The adsorption of A beta to the water-air interface and to the surface of the dipalmitoylphosphatidylethanolamine monolayer at a surface pressure pi close to zero leads to an increase in pressure up to 17 mN/m. When being adsorbed, the molecules of the peptide occupy a part of the monolayer surface, which leads to the compression of lipid molecules forming the monolayer. Further compression of the monolayer composed of the molecules of the lipid and peptide leads to the extrusion of the peptide from the monolayer. If the lipid monolayer is preliminarily (prior to the addition of the peptide to the liquid phase) compressed to pi = 30 mN/m, no adsorption of the peptide to the monolayer occurs. No changes in the structure of the dipalmitoylphosphatidylethanolamine monolayer were detected by the sliding X-ray diffraction method, indicating the absence of specific interactions. The method of reflection and absorption infrared spectroscopy makes it possible to determine the conformation of the adsorbed peptide and its orientation in the lipid monolayer. It was found that A beta has the conformation of a beta-fold oriented parallel to the interface, as it is the case with the adsorption of peptide molecules to the lipid monolayer at pi < 30 mN/m and upon adsorption to the interface that is not occupied by the lipid.     

Polarization-modulated infrared spectroscopy and x-ray reflectivity of photosystem II core complex at the gas-water interface.

The state of photosystem II core complex (PS II CC) in monolayer at the gas-water interface was investigated using in situ polarization-modulated infrared reflection absorption spectroscopy and x-ray reflectivity techniques. Two approaches for preparing and manipulating the monolayers were examined and compared. In the first, PS II CC was compressed immediately after spreading at an initial surface pressure of 5.7 mN/m, whereas in the second, the monolayer was incubated for 30 min at an initial surface pressure of 0.6 mN/m before compression. In the first approach, the protein complex maintained its native alpha-helical conformation upon compression, and the secondary structure of PS II CC was found to be stable for 2 h. The second approach resulted in films showing stable surface pressure below 30 mN/m and the presence of large amounts of beta-sheets, which indicated denaturation of PS II CC. Above 30 mN/m, those films suffered surface pressure instability, which had to be compensated by continuous compression. This instability was correlated with the formation of new alpha-helices in the film. Measurements at 4 degreesC strongly reduced denaturation of PS II CC. The x-ray reflectivity studies indicated that the spread film consists of a single protein layer at the gas-water interface. Altogether, this study provides direct structural and molecular information on membrane proteins when spread in monolayers at the gas-water interface.     

The mycocidal, membrane-active complex of Cryptococcus humicola is a new type of cellobiose lipid with detergent features.

The chemical composition of the mycocidal complex (formerly known as microcin) secreted by Cryptococcus humicola was investigated by chemical, mass spectrometric and nuclear magnetic resonance methods. The results indicate that the mycocidal complex is composed of glycolipids with a highly acetylated (up to five acetyl groups) cellobiose backbone [beta-D-Glcp-(1'-->4)-beta-D-Glcp] linked to the omega-hydroxyl group of alpha,omega-dihydroxy palmitate [16:0-alpha,omega-di-OH] with an unsubstituted carboxyl group. The acyl chain forming aglycon can be replaced by [18:0-(alpha,omega-di-OH)], [18:0-(alpha,omega-1,omega-tri-OH)], and [18:0-(alpha,omega-2,omega-tri-OH)]. The complex has a comparatively high surface activity; 0.5 mg/ml of it reduced the surface tension of 0.1 M NaHCO(3) from 71 mN/m to 37 mN/m and interfacial tension against n-hexadecane from 39 mN/m to 10 mN/m. The critical micelle concentration of the complex at pH 4.0, determined by the fluorometric method with N-phenyl-1-naphthylamine as fluorescent probe and by the De Nouy ring method, was 2 x 10(-5) M (taking the average molecular mass of the complex to be 750); it did not depend on the presence of 100 mM KCl and was an order of magnitude higher at pH 7.0. By fluorescence resonance energy transfer spectroscopy with N-(7-nitro-2,1,3-benzoxadiazol-4-yl)-phosphatidylethanolamine as energy donor and N-(rhodamine B sulfonyl)-phosphatidylethanolamine as energy acceptor the complex was shown to intercalate into the liposomal lipid matrix. Primary lesions caused by the complex in planar lipid bilayers were revealed as short-living current fluctuations of a broad spectrum of amplitudes. The mycocidal effect of the complex is suggested to be associated with its detergent-like properties.     

Local anesthetics and pressure: a comparison of dibucaine binding to lipid monolayers and bilayers

The binding of the local anesthetic dibucaine to monolayers composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine was studied with a Langmuir trough at pH 5.5 (22 degrees C, 0.1 M NaCl). At this pH value only the charged form of the local anesthetic exists in solution. Charged dibucaine was found to be surface active and to penetrate into the lipid monolayer, with the hydrophobic part of the molecule being accommodated between the fatty acyl chains of the lipid. The dibucaine intercalation could be quantitated by measuring the expansion of the film area, delta A, at constant surface pressure, pi. At a given surface pressure, delta A increased with increasing dibucaine in the buffer phase. On the other hand, keeping the dibucaine concentration constant, the area increase, delta A, was strongly dependent on the surface pressure. The area increase, delta A, was large at low surface pressure and decreased with increasing surface pressure. A plot of the relative change in surface area, delta A/A, versus the surface pressure yielded straight lines in the pressure range of 25-36 mN/m for five different concentrations. The delta A/A vs. pi isotherms intersected at pi = 39.5 +/- 1 mN/m with delta A = O, indicating that charged dibucaine apparently can no longer penetrate into the monolayer film. By making judicial assumptions about the area requirement of dibucaine the monolayer expansion curves could be transformed into true binding isotherms. Dibucaine binding isotherms were constructed for different monolayer pressures and were compared to a bilayer binding isotherm measured under similar conditions with ultraviolet spectroscopy. The best agreement between monolayer and bilayer binding data was obtained for a monolayer held at a pressure of 30.7 to 32.5 mN/m, which can thus be considered as the bilayer-monolayer equivalence pressure. It is further suggested from this analogy that the binding of dibucaine does not change the internal pressure in the bilayer phase, at least not in the concentration range of physiological interest (0-2 mM dibucaine) but induces a lateral expansion. At higher molar ratios of cationic dibucaine to lipid, chi b, in the monolayer (chi b greater than 0.20) the area increase is larger than would be expected from the molecular dimensions of dibucaine. This is probably due to charge repulsion effects, which at still higher molar ratios (chi b greater than 0.6) lead to a micellisation. The pressure dependence of the intercalation of cationic dibucaine into lipid membranes may also be of relevance for the phenomenon of pressure reversal in anesthesia.     

Octyl-beta-D-glucopyranoside partitioning into lipid bilayers: thermodynamics of binding and structural changes of the bilayer.

The interaction of the nonionic detergent octyl-beta-D-glucopyranoside (OG) with lipid bilayers was studied with high-sensitivity isothermal titration calorimetry (ITC) and solid-state 2H-NMR spectroscopy. The transfer of OG from the aqueous phase to lipid bilayers composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) can be investigated by employing detergent at concentrations below the critical micellar concentration; it can be defined by a surface partition equilibrium with a partition coefficient of K = 120 +/- 10 M-1, a molar binding enthalpy of delta H degrees D = 1.3 +/- 0.15 kcal/mol, and a free energy of binding of delta G degrees D = -5.2 kcal/mol. The heat of transfer is temperature dependent, with a molar heat capacity of delta CP = -75 cal K-1 mol-1. The large heat capacity and the near-zero delta H are typical for a hydrophobic binding equilibrium. The partition constant K decreased to approximately 100 M-1 for POPC membranes mixed with either negatively charged lipids or cholesterol, but was independent of membrane curvature. In contrast, a much larger variation was observed in the partition enthalpy. delta H degrees D increased by about 50% for large vesicles and by 75% for membranes containing 50 mol% cholesterol. Structural changes in the lipid bilayer were investigated with solid-state 2H-NMR. POPC was selectively deuterated at the headgroup segments and at different positions of the fatty acyl chains, and the measurement of the quadrupolar splittings provided information on the conformation and the order of the bilayer membrane. Addition of OG had almost no influence on the lipid headgroup region, even at concentrations close to bilayer disruption. In contrast, the fluctuations of fatty acyl chain segments located in the inner part of the bilayer increased strongly with increasing OG concentration. The 2H-NMR results demonstrate that the headgroup region is the most stable structural element of the lipid membrane, remaining intact until the disordering of the chains reaches a critical limit. The perturbing effect of OG is thus different from that of another nonionic detergent, octaethyleneglycol mono-n-dodecylether (C12E8), which produces a general disordering at all levels of the lipid bilayer. The OG-POPC interaction was also investigated with POPC monolayers, using a Langmuir trough. In the absence of lipid, the measurement of the Gibbs adsorption isotherm for pure OG solutions yielded an OG surface area of AS = 51 +/- 3 A2. On the other hand, the insertion area AI of OG in a POPC monolayer was determined by a monolayer expansion technique as AI = 58 +/- 10 A2. The similar area requirements with AS approximately AI indicate an almost complete insertion of OG into the lipid monolayer. The OG partition constant for a POPC monolayer at 32 mN/m was Kp approximately 320 M-1 and thus was larger than that for a POPC bilayer.