Biosynthesis and characterization of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) produced by Burkholderia cepacia D1.

Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced by Burkholderia cepacia D1 at 30°C in nitrogen-free culture solutions containing n-butyric acid and/or n-valeric acid. When n-valeric acid was used as the sole carbon source, the 3HV fraction in copolyester increased from 36 to 90 mol% as the concentration of n-valeric acid in the culture solution increased from 1 to 20 g/l. The addition of n-butyric acid to the culture solution resulted in a decrease in the 3HV fraction in copolyester. The copolymers biosynthesized by this method were mixtures of random copolymers having a wide variety of composition of the 3HV component. The melting points of the fractionated copolymers show a concave curve with the minimum at the 3HV content of ≈40 mol%. The a-parameter of lattice indices of the P(3HB) crystal for the fractionated copolymers largely increased as the 3HV composition increased. Biodegradability of the copolymer increased with the lower content of 3HV composition and/or the lower crystallinity.     

Production of copolyesters of 3-hydroxybutyrate and 3-hydroxyvalerate by Alcaligenes eutrophus from butyric and pentanoic acids

Summary Copolyesters of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) have been produced by Alcaligenes eutrophus in nitrogenfree culture solutions of butyric and pentanoic acids. When pentanoic acid was used as the sole carbon source, a copolyester with an unusually high 3HV fraction of 90 mol% was produced. Copolyesters with a wide range of compositions (0–90 mol% 3HV) were obtained by using butyric and pentanoic acids together as carbon sources. The biosynthetic pathways of poly(3-hydroxybutyrate) were investigated using [1-¹³C]acetate and [1-¹³C]butyrate. It is suggested that butyric and pentanoic acids are incorporated into the copolyester as 3HB and 3HV units respectively without decomposition of the carbon skeletons in the cell.     

Enhanced production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) copolymer with manipulated variables and its properties

Cupriavidus sp. USMAA1020, a local isolate was able to biosynthesis poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] copolymer with various 4HB precursors as the sole carbon source. Manipulation of the culture conditions such as cell concentration, phosphate ratio and culture aeration significantly affected the synthesis of P(3HB-co-4HB) copolymer and 4HB composition. P(3HB-co-4HB) copolymer with 4HB compositions ranging from 23 to 75 mol% 4HB with various mechanical and thermal properties were successfully produced by varying the medium aeration. The physical and mechanical properties of P(3HB-co-4HB) copolymers were characterized by NMR spectroscopy, gel-permeation chromatography, tensile test, and differential scanning calorimetry. The number-average molecular weights (M _n) of copolymers ranged from 260 × 10³ to 590 × 10³Da, and the polydispersities (M _w/M _n) were between 1.8 and 3.0. Increases in the 4HB composition lowered the molecular weight of these copolymers. In addition, the increase in 4HB composition affected the randomness of copolymer, melting temperature (T _m), glass transition temperature (T _g), tensile strength, and elongation to break. Enzymatic degradation of P(3HB-co-4HB) films with an extracellular depolymerase from Ochrobactrum sp. DP5 showed that the degradation rate increased proportionally with time as the 4HB fraction increased from 17 to 50 mol% but were much lower with higher 4HB fraction. Degradation of P(3HB-co-4HB) films with lipase from Chromobacterium viscosum exhibited highest degradation rate at 75 mol% 4HB. The biocompatibility of P(3HB-co-4HB) copolymers were evaluated and these copolymers have been shown to support the growth and proliferation of fibroblast cells.     

Production of poly(3-hydroxybutyrate) and poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by <Emphasis Type="Italic">Rhodopseudomonas palustris</Emphasis> SP5212

Summary Production of poly(3-hydroxybutyric acid) [P(3HB)] by Rhodopseudomonas palustris SP5212 isolated in this laboratory has been optimized under phototrophic microaerophilic conditions. Cells grown in malate medium accumulated 7.7% (w/w) P(3HB) of cellular dry weight at the early stationary phase of growth. The accumulated P(3HB) however, attained 15% (w/w) of cellular dry weight when acetate (1.0%, w/v) was used as the sole carbon source under nitrogen-limiting conditions. Synthesis and accumulation of polymer was favoured by sulphate-free conditions and at a phosphate concentration sub-optimal for growth. The polymer content of cells was increased drastically (34% of cellular dry weight) when the acetate containing medium was supplemented with n-alkanoic acids. Compositional analysis by H¹ NMR revealed that these accumulated polymers were composed of 3-hydroxybutyric acid and 3-hydroxyvaleric acid (3HV). The contents of 3HV in these copolymers ranged from 14 to 38 mol%.     

Production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) with high molar fractions of 3-hydroxyvalerate by a threonine-overproducing mutant of Alcaligenes sp. SH-69

A threonine overproducing mutant of Alcaligenes sp. SH-69 was isolated and its ability to produce poly(3-hydroxybutyrate-co-3-hydroxyvalerate), poly(3HB-co-3HV), was investigated. The 3HV fraction in poly(3HB-co-3HV) produced from glucose as the sole carbon source exceeded 22 mol%, which is approximately six times higher than that achieved by the wild type under the same culture conditions. Furthermore, the addition of a relatively low concentration (10 mM) of propionic acid, valeric acid or levulinic acid to the glucose medium greatly increased the molar fraction of 3HV in the copolyester, to 38–77 mol%. The results suggest that metabolic engineering of the biosynthetic pathways supplying polyhydroxyalkanoate monomers, such as the threonine biosynthetic pathway, can lead to new poly(3HB-co-3HV)-producing strains.     

Biosynthesis and characterization of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) in Alcaligenes eutrophus

Copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus at 30 degrees C in nitrogen-free culture solutions containing gamma-butyrolactone alone or with fructose or butyric acid as the carbon sources. When gamma-butyrolactone was used as the sole carbon source, the 4HB fraction in copolyester increased from 9 to 21 mol% as the concentration of gamma-butyrolactone in the culture solution increased from 10 to 25 g/l. The addition of fructose to the culture solution of gamma-butyrolactone resulted in a decrease in the 4HB fraction in copolyester. The copolyesters produced from gamma-butyrolactone and fructose by A. eutrophus were shown to have random sequence distribution of 3HB and 4HB units by analysis of the 125 MHz 13C n.m.r. spectra. In contrast, a mixture of random copolyesters with two different 4HB fractions was produced by A. eutrophus when gamma-butyrolactone and butyric acid were used as the carbon sources. These results are discussed on the basis of a proposed biosynthetic pathway of P(3HB-co-4HB). The copolyester films became soft with an increase in the 4HB fraction, and the elongation to break at 23 degrees C increased from 5 to 444% as the 4HB fraction increased from 0 to 16 mol%. The P(3HB-co-10% 4HB) film was shown to be biodegradable in an activated sludge.     

Synthesis of Poly(3-Hydroxybutyrate-Co-3-Hydroxyvalerate) from Methanol and n-Amyl Alcohol by the Methylotrophic Bacteria Paracoccus denitrificans and Methylobacterium extorquens

Strains of two types of methylotrophic bacteria, Paracoccus denitrificans and Methylobacterium extorquens, synthesized the copolyester poly(3-hydroxybutyrate-co-3-hydroxyvalerate) when methanol and n-amyl alcohol were added together to nitrogen-limited medium. The composition of the copolyester differed considerably between the two strains: the copolyester from P. denitrificans was comparatively rich in 3-hydroxyvalerate (3HV). The 3HV content of the copolyester synthesized by this strain increased with increasing concentrations of n-amyl alcohol. Its maximum content was 91.5 mol% under the conditions used. In M. extorquens, the maximum 3HV content was limited to 38.2 mol%. Since n-amyl alcohol served as a substrate for a standard methanol dehydrogenase, the enzyme was proposed to oxidize both methanol and n-amyl alcohol in the first step of copolyester synthesis from these substrates by methanol-grown cells.     

Biosynthesis of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) copolymer by Cupriavidus sp. USMAA1020 isolated from Lake Kulim, Malaysia

Cupriavidus sp. USMAA1020 was isolated from Malaysian environment and able to synthesize poly(3-hydroxybutyrate-co-4-hydroxybutyrate), [P(3HB-co-4HB)] when grown on gamma-butyrolactone as the sole carbon source. The polyester was purified from freeze-dried cells and analyzed by nuclear magnetic resonance (NMR) spectroscopy. 1H and 13C NMR results confirmed the presence of 3HB and 4HB monomers. In a one-step cultivation process, P(3HB-co-4HB) accumulation by Cupriavidus sp. USMAA1020 was affected by carbon to nitrogen ratio (C/N). A two-step cultivation process accumulated P(3HB-co-4HB) copolyester with a higher 4HB fraction (53 mol%) in nitrogen-free mineral medium containing gamma-butyrolactone. The biosynthesis of P(3HB-co-4HB) was also achieved by using 4-hydroxybutyric acid and alkanediol as 1,4-butanediol. The composition of copolyesters varied from 32 to 51 mol% 4HB, depending on the carbon sources supplied. The copolyester produced by Cupriavidus sp. USMAA1020 has a random sequence distribution of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) units when analyzed by nuclear magnetic resonance (NMR) spectroscopy. When gamma-butyrolactone was used as the sole carbon source, the 4HB fraction in copolyester increased from 25 to 60 mol% as the concentration of gamma-butyrolactone in the culture medium increased from 2.5 g/L to 20.0 g/L.     

Biosynthesis of Poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate-<Emphasis Type="Italic">co</Emphasis>-4-hydroxybutyrate) terpolymer by <Emphasis Type="Italic">Cupriavidus</Emphasis> sp. USMAA2-4 through two-step cultivation process

A locally isolated Gram-negative bacterium, Cupriavidus sp. USMAA2-4 was found capable of producing terpolymer poly(3-hydroxybutyrate-co-3-hydroxyvalerate-co-4-hydroxybutyrate) [P(3HB-co-3HV-co-4HB)] using γ-butyrolactone or 1,4-butanediol with either valeric acid or 1-pentanol as the carbon source. The present of 3HB, 3HV and 4HB monomers were confirmed by gas chromatography (GC) and nuclear magnetic resonance (NMR) analysis. PHA concentration of 1.9 g/l was the highest value obtained using the combination of 1,4-butanediol and 1-pentanol through one-step cultivation process. PHA concentration obtained through two-step cultivation process was higher for all the combinations and the highest value achieved was 2.5 g/l using γ-butyrolactone and 1-pentanol as carbon source. Various molar fractions of 4HB and 3HV ranging from 6 to 14 mol% and 39 to 87 mol%, respectively were produced through two-step cultivation process by manipulating the concentration of γ-butyrolactone. As the culture aeration was reduced, the molar fraction of 3HV and 4HB increased from 40 to 67 mol% and 10 to 24 mol%, respectively while the dry cell weight and PHA content decreased. The terpolymer produced was characterized using gel permeation chromatography (GPC) and differential scanning calorimetry (DSC). The number-average molecular weight (M _n) and the melting temperature (T _m)) of the terpolymer were in the range of 177–484 kDa and 160–164°C, respectively.     

Continuous production of poly(3-hydroxybutyrate-co-3-hyhroxyvalerate) byAlcaligenes eutrophus

Summary Copolymers of 3-hydroxybutyrate (3HB) and 3-hydroxyvalerate (3HV) were produced in a continuous culture ofAlcaligenes eutrophus with 17.5 gl ^–1 of fructose and 2.5gl ^–1 of pentanoic acid in the feed. The P(3HB-co-3HV) productivity was maximal at a dilution rate of 0.17h^–1 and yielded 0.31gl ^–1h^–1 under an ammonium-limited condition. The 3HV content in copolymers increased from 11 to 79 mol% as the dilution rate of cells was increased from 0.06 to 0.32h^–1.     

Production of a copolyester of 3-hydroxybutyric acid and 3-hydroxyvaleric acid from single unrelated carbon sources by a mutant of Alcaligenes eutrophus

Summary Alcaligenes eutrophus mutant strain R3, which is a spontaneous revertant to prototrophy of an isoleucine-auxotrophic mutant of the wild-type strain H16, accumulated a copolyester consisting of 3-hydroxybutyric acid (3HB) as main constituent and of 3-hydroxyvaleric acid (3HV), i.e. poly(3HB-co-3HV), as the only other constituent from various single unrelated substrates, which were provided in excess, after a nutrient essential for growth was depleted in the medium. Poly(SHB-co-3HV) was produced from fructose, gluconate, succinate, acetate or lactate during cell starvation of the nitrogen, sulphur or magnesium source. Although 3HV amounted to only 8 mol% of the constituents of the polyester, this study provides a general rationale for construction and utilization of mutants of poly(3HB)-accumulating bacteria that are altered in the metabolism of branched-chain amino acids for the production of poly(3HB-co-3HV) from single unrelated substrates. Offprint requests to: A. Steinbüchel     

Production of a novel copolyester of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids by Pseudomonas sp. 61-3 from sugars

 Pseudomonas sp. 61-3 (isolated from soil) produced a polyester consisting of 3-hydroxybutyric acid (3HB) and of medium-chain-length 3-hydroxyalkanoic acids (3HA) of C₆, C₈, C₁₀ and C₁₂, when sugars of glucose, fructose and mannose were fed as the sole carbon source. The polyester produced was a blend of homopolymer and copolymer, which could be fractionated with boiling acetone. The acetone-insoluble fraction of the polyester was a homopolymer of 3-hydroxybutyrate units [poly (3HB)], while the acetone-soluble fraction was a copolymer [poly(3HB-co-3HA)] containing both short- and medium-chain-length 3-hydroxyalkanoate units ranging from C₄ to C₁₂:44 mol% 3-hydroxybutyrate, 5 mol% 3-hydroxyhexanoate, 21 mol% 3-hydroxyoctanoate, 25 mol% 3-hydroxydecanoate, 2 mol% 3-hydroxydodecanoate and 3 mol% 3-hydroxy-5-cis-dodecenoate. The copolyester was shown to be a random copolymer of 3-hydroxybutyrate and medium-chain-length 3-hydroxyalkanoate units by analysis of the ¹³C-NMR spectrum. The poly(3HB) homopolymer and poly (3HB-co-3HA) copolymer were produced simultaneously within cells from glucose in the absence of any nitrogen source, which suggests that Pseudomonas sp. 61-3 has two types of polyhydroxy-alkanoate syntheses with different substrate specificities. Received: 9 June 1995/Received last revision: 30 October 1995/Accepted: 6 November 1995     

Biosynthesis of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate) copolyesters with a high molar fraction of 3-hydroxyvalerate by an insect-symbiotic <Emphasis Type="Italic">Burkholderia</Emphasis> sp. IS-01

Burkholderia sp. IS-01 capable of biosynthesizing poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [poly(3HB-co-3HV)] copolyesters with a high molar fraction of 3HV was isolated from the gut of the adult longicorn beetle, Moechotypa diphysis. The strain IS-01 was relatively tolerant to high concentrations of levulinic acid and accumulated a poly(13.5 mol% 3HB-co-86.5 mol% 3HV) copolyester when cultivated on a mixture of gluconate (20 g/L) and levulinic acid (12.5 g/L). In this case, the content of the copolyester in the cells was approximately 60.0%. The compositions of the copolyesters were easily regulated by altering the molar ratio of gluconate and levulinic acid in the medium. The organism was found to possess a class I PHA synthase (PhaC) gene (1,881 bp) that encodes a protein with a deduced molecular mass of 68,538 Da that consists of 626 amino acids. The PhaC of this organism was most similar to that of B. cenocepacia PC184 (92% similarity).     

Production of poly(3-hydroxybutyrate-<Emphasis Type="Italic">co</Emphasis>-3-hydroxyvalerate) P(3HB-<Emphasis Type="Italic">co</Emphasis>-3HV) with a broad range of 3HV content at high yields by <Emphasis Type="Italic">Burkholderia sacchari</Emphasis> IPT 189

The biosynthesis of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) from sucrose and propionic acid by Burkholderia sacchari IPT 189 was studied using a two-stage bioreactor process. In the first stage, this bacterium was cultivated in a balanced culture medium until sucrose exhaustion. In the second stage, a solution containing sucrose and propionic acid as carbon source was fed to the bioreactor at various sucrose/propionic acid (s/p) ratios at a constant specific flow rate. Copolymers with 3HV content ranging from 40 down to 6.5 (mol%) were obtained with 3HV yield from propionic acid (Y _3HV/prop) increasing from 1.10 to 1.34 g g⁻¹. Copolymer productivity of 1 g l⁻¹ h⁻¹ was obtained with polymer biomass content rising up to 60% by increasing a specific flow rate at a constant s/p ratio. Increasing values of 3HV content were obtained by varying the s/p ratios. A simulation of production costs considering Y _3HV/prop obtained in the present work indicated that a reduction of up to 73% can be reached, approximating US$ 1.00 per kg which is closer to the value to produce P3HB from sucrose (US$ 0.75 per kg).     

Viscoelastic relaxations and thermal properties of bacterial poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and poly(3-hydroxybutyrate-co-4-hydroxybutyrate)

3-Hydroxybutyrate-3-hydroxyvalerate (3HB-3HV) as well as 3-hydroxybutyrate-4-hydroxybutyrate (3HB-4HB) copolyesters have been investigated by differential scanning calorimetry, thermogravimetric analysis and dynamic mechanical spectroscopy, over a wide range of compositions (0-95 mol% 3HV; 0-82 mol% 4HB). Both series of isolated copolyesters are partially crystalline at all compositions. Quenched samples show a glass transition that decreases linearly with increasing co-monomer molar fraction, more markedly when the co-monomer is 4HB. Above Tg, all copolyesters, rich in 3HB units, show a cold crystallization phenomenon followed by melting, while at the other end crystallization on heating is observed only in 3HB-3HV copolymers. The viscoelastic spectrum, strongly affected by thermal history, shows two relaxation regions: the glass transition, whose location depends on copolymer type and composition, and a secondary dispersion region at low temperatures (-130/-80 degrees C). The latter results from a water-related relaxation analogous to that of P(3HB) and, in 3HB-4HB copolymers, from another overlapping absorption peak centered at -130 degrees C, attributed to local motion of the methylene groups in the linear 4HB units.     

Regulating the molar fraction of 4-hydroxybutyrate in Poly(3-hydroxybutyrate-co-4-hydroxybutyrate) by biological fermentation and enzymatic degradation

The regulation of 4-hydroxybutyrate (4HB) molar fraction in the poly(3-hydroxybutyrate-co-4-hydroxybutyrate) [P(3HB-co-4HB)] of a local isolate Cupriavidus sp. USMAA1020 was attempted by employing a feeding strategy through fed-batch fermentation in 100-L fermenter. The growth of Cupriavidus sp. USMAA1020 was enhanced by frequently feeding carbon and nitrogen at a ratio of 5 (C/N 5) using a DO-stat with cascade mode at 20% (v/v) dissolved oxygen (DO). The feeding of C/N 5 and the use of the DO-stat mode were able to regulate the 4HB composition from 0–67 mol% by sequential feeding of γ-butyrolactone and supplementing oleic acid. A high 4HB molar fraction of 67 mol% with a PHA concentration of 5.2 g/L was successfully obtained by employing this feeding strategy. Notably, enzymatic degradation carried out enhanced the 4HB composition of the copolymer synthesized. PHB depolymerase enzyme from Acidovorax sp. was used to degrade this P(3HB-co-70-mol%4HB) copolymer and the 4HB composition could be increased up to 83 mol%. The degradation process was observed by monitoring the time-dependent change in the weight loss of copolymer films. The percentage of weight loss of solvent-cast film increased proportionally up to 19% within 3 h, whereas salt-leached films showed 90% of weight loss within 3 h of incubation and were completely degraded by 4 h. The molecular weight (M _n ) of the films treated with enzyme demonstrated a slight decrease. SEM observation exhibited a rough surface morphology of the copolymer degraded with depolymerase enzyme.     

Production of poly(3-hydroxybutyrate-co-4-hydroxybutyrate) byPseudomonas acidovorans

Summary Terpolyesters of 3-hydroxybutyrate (3HB), 4-hydroxybutyrate (4HB) and 3-hydroxyvarelate (3HV) were produced byPseudomonas acidovorans in nitrogen-free culture solutions of 1,4-butanediol and pentanol. When 1,4-butanediol was used as the sole carbon source, a polyester with an unusually high 4HB fraction of 99 mol% was produced.     

Production of biodegradable copolyesters of 3-hydroxybutyrate and 4-hydroxybutyrate by Alcaligenes eutrophus

Summary New copolyesters of 3-hydroxybutyrate (3HB) and 4-hydroxybutyrate (4HB) were produced by Alcaligenes eutrophus from various carbon sources of 4-hydroxybutyric acid, 4-chlorobutyric acid, 1,4-butanediol, and -butyrolactone. The composition of copolyesters varied from 0 to 37 mol% 4HB, depending on the carbon sources supplied. The biosynthetic pathway of copolyesters has been discussed. The copolyester film was biodegradable in soil and activated sludge. The rate of biodegradation was enhanced by the presence of 4HB units.     

Economic considerations in the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) by bacterial fermentation

The process for the production of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) [P(3HB/V)] by bacterial fermentation and its recovery was analysed. The effects of various factors such as P(3HB/V) content, P(3HB/V) productivity, P(3HB/V) yield and 3-hydroxyvalerate (3HV) fraction in P(3HB/V) on the production cost of P(3HB/V) were examined. The increase in the 3HV yield on a carbon source did not significantly decrease the production cost when the 3HV fraction was 10 mol%, because the cost of the carbon substrate for 3HV was relatively small in terms of the total cost. However, at a 3HV fraction of 30 mol%, the 3HV yield on a carbon source had a significant effect on the total P(3HB/V) production cost. The production cost of P(3HB/V) increased linearly with the increase in the 3HV fraction in P(3HB/V). Received: 8 September 1999 / Received revision: 2 December 1999 / Accepted: 3 December 1999     

Biosynthesis of copolyesters consisting of 3-hydroxybutyric acid and medium-chain-length 3-hydroxyalkanoic acids from 1,3-butanediol or from 3-hydroxybutyrate by Pseudomonas sp. A33

Pseudomonas sp. A33 and other isolates of aerobic bacteria accumulated a complex copolyester containing 3-hydroxybutyric acid (3HB) and various medium-chain-length 3-hydroxyalkanoic acids (3HA_MCL) from 3-hydroxybutyric acid or from 1,3-butanediol under nitrogen-limitated culture conditions. 3HB contributed to 15.1 mol/100 mol of the constituents of the polyester depending on the strain and on the cultivation conditions. The accumulated polymer was a copolyester of 3HB and 3HA_MCL rather than a blend of poly(3HB) and poly(3HA_MCL) on the basis of multiple evidence. 3-Hydroxyhexadecenoic acid and 3-hydroxyhexadecanoic acid were detected as constituents of polyhydroxyalkanoates, which have hitherto not been described, by¹³C nuclear magnetic resonance or by gas chromatography/mass spectrometric analysis. In total, ten different constituents were detected in the polymer synthesized from 1,3-butanediol by Pseudomonas sp. A33:besides seven saturated (3HB, 3-hydroxyhexanoate, 3-hydroxyoctanoate, 3-hydroxydecanoate, and 3-hydrohexadecanoate) three unsaturated (3-hydroxydodecenoate, 3-hydroxytetradecenoate and 3-hydrohexadecanoate) hydroxyalkanoic acid constituents occured. The polyhydroxyalkanoate synthase of Pseudomonas sp. A33 was cloned, and its substrate specificity was evaluated by heterologous expression in various strains of P. putida, P. oleovorans and Alcaligenes eutrophus.