Role of the rom protein in copy number control of plasmid pBR322 at different growth rates in Escherichia coli K-12

The copy number per cell mass of plasmid pBR322 and a rom- derivative was measured as a function of generation time. In fast growing cells the copy number per cell mass was virtually identical for rom+ and rom- derivatives. However, the copy number of pBR322 only increased 3- to 4-fold from a 20- to 80-min generation time, whereas the copy number of the rom- derivative increased 7- to 10-fold. The copy number stayed constant for the rom+ and rom- plasmids at generation times longer than 80-100 min. Thus, the presence of the rom gene decreased the copy number of plasmid pBR322 in slowly growing cells at least 2-fold when compared with the rom- plasmid. To study the effect of the rom gene in trans we cloned the gene into the compatible P15A-derived rom- plasmid pACYC184. In cells carrying both pACYC184 rom+ and pBR322 rom- the presence of the rom gene in trans had little effect on the copy number of pBR322 rom- at fast growth, but it decreased its copy number at slow growth to the same level as found for pBR322, i.e., complemented the pBR322 rom- plasmid. The pACYC184 plasmid and its rom+ derivatives showed copy numbers similar to those of pBR322 rom- and pBR322 itself, respectively, at fast and slow growth. We conclude that the rom gene product-the Rom protein-is an important element in copy number control of ColE1-type plasmids especially in slowly growing cells.     

Construction and characterization of new cloning vehicles. III. Derivatives of plasmid pBR322 carrying unique Eco RI sites for selection of Eco RI generated recombinant DNA molecules.

In vitro recombinant DNA techniques were used to construct two new cloning vehicles, pBR324 and pBR235. These vectors, derived from plasmid pBR322, are relaxed replicating elements. Plasmid pBR324 carries the genes from pBR322 coding for resistance to the antibiotics ampicillin (Apr) and tetracycline (Tcr) and the colicin E1 structural and immunity genes derived from plasmid pMBI. Plasmid pBR325 carries the Apr and Tcr genes from pBR322 and the cloramphenicol resistance gene (Cmr) from phage P1Cm. In these plasmids the unique EcoRI restriction site present in the DNA molecule is located either in the colicin E1 structural gene (pBR324) or in the Cmr gene (pBR325). These vectors were constructed in order to have a single EcoRI site located in the middle of a structural gene which when inactivated would allow, for the easy selection of plasmid recombinant DNA molecules. These plasmids permit the molecular cloning and easy selection of EcoRI, BamHI, HindIII, PstI, HincII, SalI, (XamI), Smal, (XmaI), BglII and DpnII restriction generated DNA molecules.     

A vector that replicates as a plasmid and can be efficiently selected in B-lymphoblasts transformed by Epstein-Barr virus.

Epstein-Barr virus (EBV) transforms human B-lymphocytes into proliferating blasts which are efficiently established into cell lines. The viral DNA in these cell lines is usually present as complete, unintegrated plasmid molecules. A cis-acting element of EBV, oriP, permits plasmid maintenance in adherent cells that carry EBV DNA. We constructed a vector, pHEBo, that carries oriP and showed that it is also efficiently maintained as a plasmid when introduced into EBV-transformed B-lymphoblasts. The pHEBo vector carries the coding sequences for the hph gene from Escherichia coli such that it can be expressed in mammalian cells and confers resistance to the antibiotic hygromycin B. Hygromycin B kills EBV-transformed lymphoblasts at concentrations of 50 to 300 micrograms/ml. The combination of oriP plus the expressed hph gene makes pHEBo useful for the stable introduction of genes on plasmids into EBV-transformed lymphoblasts. Because pHEBo is derived from the plasmid pBR322 it can be easily isolated from lymphoblasts by reintroduction into E. coli.     

Context-dependent gene expression: cis-acting negative effects of specific procaryotic plasmid sequences on eucaryotic genes.

A sequence element within pBR322 DNA mediates a cis-acting negative effect on expression from eucaryotic genes in transient expression assays. The negative element overlaps with sequences that inhibit DNA replication, but its effect is observed in the absence of detectable replication of transfected DNA.     

Polyomavirus-plasmid recombinants capable of replicating have an enhanced transforming potential.

The frequency of transformation of rodent fibroblasts by polyomavirus is enhanced by a viral gene product, large T-antigen. However, this effect of large T-antigen cannot be demonstrated with pBR322-cloned viral DNA. Recently, it was discovered that pBR322 contains cis-acting sequences inhibitory to DNA replication in mammalian cells. Because polyomavirus large T-antigen is required for viral DNA replication, we examined the possibility that our inability to demonstrate a requirement for large T-antigen in transformation with pBR322-cloned viral DNA was due to the failure of the chimeric DNA to replicate in the transfected cells. To this end we constructed polyomavirus recombinant molecules with a plasmid (pML-2) that lacks these "poison" sequences and measured their capacity to transform cells. Here we report that recombinant plasmids capable of replicating in the transfected cells transform these cells at frequencies approximately sixfold greater than their replication-defective counterparts.     

Boundaries of the Origin of Replication: Creation of a pET-28a-Derived Vector with p15A Copy Control Allowing Compatible Coexistence with pET Vectors

During our studies involving protein-DNA interactions, we constructed plasmid pSAM to fulfill two requirements: 1) to facilitate transfer of cloned sequences from widely used expression vector pET-28a(+), and 2) to provide a vector compatible with pBR322-derived plasmids for use in cells harboring two different plasmids. Vector pSAM is a pET-28a(+)-derived plasmid with the p15A origin of replication (ori); pET-28a(+) contains the pBR322 replicon that is incompatible with other pBR322-derived plasmids. By replacing the original pET-28a(+) replicon–comprising the ori, RNAI, RNAII, and Rom–with the p15A replicon, we generated pSAM, which contains the pET-28a(+) multiple cloning site and is now compatible with pBR322-derived vectors. Plasmid copy number was assessed using quantitative PCR: pSAM copy number was maintained at 18±4 copies per cell, consistent with that of other p15A-type vectors. Compatibility with pBR322-derived vectors was tested with pGEX-6p-1 and pSAM, which maintained their copy numbers of 49±10 and 14±4, respectively, when both were present within the same cell. Swapping of the ori is a common practice; however, it is vital that all regions of the original replicon be removed. Additional vector pSAMRNAI illustrated that incompatibility remains when portions of the replicon, such as RNAI and/or Rom, are retained; pSAMRNAI, which contains the intact RNAI but not ROM, lowered the copy number of pGEX-6p-1 to 18±2 in doubly transformed cells due to retention of the pET-28a(+)-derived RNAI. Thus, pSAMRNAI is incompatible with vectors controlled by the pBR322 replicon and further demonstrates the need to remove all portions of the original replicon and to quantitatively assess copy number, both individually and in combination, to ensure vector compatibility. To our knowledge, this is the first instance where the nascent vector has been quantitatively assessed for both plasmid copy number and compatibility. New vector pSAM provides ease of transferring sequences from commonly used pET-28a(+) into a vector compatible with the pBR322 family of plasmids. This essential need is currently not filled.     

Absolute and relative QPCR quantification of plasmid copy number in Escherichia coli

Real-time QPCR based methods for determination of plasmid copy number in recombinant Escherichia coli cultures are presented. Two compatible methods based on absolute and relative analyses were tested with recombinant E. coli DH5alpha harboring pBR322, which is a common bacterial cloning vector. The separate detection of the plasmid and the host chromosomal DNA was achieved using two separate primer sets, specific for the plasmid beta-lactamase gene (bla) and for the chromosomal d-1-deoxyxylulose 5-phosphate synthase gene (dxs), respectively. Since both bla and dxs are single-copy genes of pBR322 and E. coli chromosomal DNA, respectively, the plasmid copy number can be determined as the copy ratio of bla to dxs. These methods were successfully applied to determine the plasmid copy number of pBR322 of E. coli host cells. The results of the absolute and relative analyses were identical and highly reproducible with coefficient of variation (CV) values of 2.8-3.9% and 4.7-5.4%, respectively. The results corresponded to the previously reported values of pBR322 copy number within E. coli host cells, 15-20. The methods introduced in this study are convenient to perform and cost-effective compared to the traditionally used Southern blot method. The primer sets designed in this study can be used to determine plasmid copy number of any recombinant E. coli with a plasmid vector having bla gene.     

Effects of genes exerting growth inhibition and plasmid stability on plasmid maintenance.

Plasmid stabilization mediated by the parA+ and parB+ genes of the R1 plasmid and the ccd+ and sop+ genes of the F plasmid was tested on a mini-R1 plasmid and a pBR322 plasmid derivative. The mini-R1 plasmid is thought to be unstably inherited owing to a low copy number and to random segregation of the plasmid at cell division, whereas cells harboring the pBR322 derivative used in this work are lost through competition with plasmid-free cells, mainly as a result of the shorter generation time of cells without plasmids. The pBR322 derivative carries a fusion between part of the atp operon of Escherichia coli and the bacteriophage lambda pR promoter, and the cI857 repressor gene. The insertion of sop+ from the F plasmid or parB+ from the R1 plasmid reduced the loss frequency by a factor of 10(3) for the pBR322 derivative and by at least a factor of 10(2) for the mini-R1 plasmid. Insertion of parA+ from the R1 plasmid decreased the loss frequency of the pBR322 derivative by a factor of 10 and that of the mini-R1 plasmid by a factor of 50. When ccd+ from the F plasmid was inserted, the loss frequency of the pBR322 derivative was decreased by a factor of 10, but it had only a marginal effect on the stability of the mini-R1 plasmid. In no case was any significant structural instability of the plasmids observed.     

The site-specific deletion in plasmid pBR322

The formation of a deletion derivative of plasmid pBR322, designated pBR322 delta 1, was observed during cloning of various eukaryotic DNAs, when the BamHI site of the plasmid vector was used for construction of the recombinant molecules. The restriction analysis of six independently isolated pBR322 delta 1 plasmids allowed establishment of their complete identity. Similar deletion derivatives were also formed as a result of transformation of Escherichia coli cells by the linear form of vector pBR322 produced by BamHI cleavage, but not by SalI or HindIII. The endpoints of the deletion in one of the pBR322 delta 1 plasmids occurred at positions 375 and 16666 bp from the EcoRI site, as determined by sequence analysis. Formation of pBR322 delta 1 is most probably due to site-specific recombination between the sequence in the 1666-1670 bp region and the BamHI end of the linear pBR322 molecule. THe deletion was not controlled by the recA system of the host bacteria.     

Heat shock inactivates a supernatant factor(s) specifically required for efficient expression of the amp gene in Escherichia coli

A 160,000 x g supernatant of E. coli extract prepared from cells grown at 30 degrees C stimulated specifically the expression of the amp gene on pBR322 and pBR328 in an in vitro gene expression system from E. coli. This activity of the supernatant was markedly reduced when the cells were exposed to 42 degrees C for 30 min prior to preparing the supernatant. These results are consistent with the view that heat shock-induced repression of the amp gene expression is due to inactivation of a supernatant factor(s) required for effective expression of the amp gene.     

Effect of plasmid copy number and lac operator sequence on antibiotic-free plasmid selection by operator-repressor titration in Escherichia coli

The Escherichia coli strain DH1lacdapD enables plasmid selection and maintenance that is free from antibiotics and selectable marker genes. This is achieved by using only the lac operator sequence as a selectable element. This strain is currently used to generate high copy number plasmids with no antibiotic resistance genes for use as DNA vaccines and for expression of recombinant proteins. Until now these have been limited to pUC-based plasmids containing a high copy number pMB1-derived origin of replication, and the principle lacO(1) and auxiliary lacO(3) operators. In this study we have shown that this system can also be used to select and maintain pBR322-based plasmids with the lower copy number pMB1 origin of replication, and that lacO(1) alone or a palindromic version of lacO(1) can provide a sufficient level of repressor titration for plasmid selection. This is advantageous for recombinant protein production, where low copy number plasmids are often used and plasmid maintenance is important. The degree of repressor titration due to these plasmids was measured using the natural lactose operon in E. coli DH1 as a model.     

n' Protein activator sites of plasmid pBR322 are not essential for its DNA replication

The lagging strand DNA synthesis of the Escherichia coli bacterial chromosome and plasmids is thought to be initiated by the mobile promotor, the primosome. This primosome is assembled at a specific site on single-stranded DNA. This process is initiated by the interaction of one of the at least seven components, the n' protein, with this site. Indeed n' protein activator sites are found in the plasmids Col E1 and pBR322. To investigate the in vivo function of these n' protein sites, deletion derivates of pBR322 were constructed in which the n' protein sites are removed. The deletion plasmids show no change in stability and only threefold reduction in copy number compared to pBR322. Using a transduction system for single-stranded plasmid DNA it was shown that no other specific initiation signals for lagging strand DNA synthesis were present in the deletion plasmids. It was concluded that the n' protein activator sites in pBR322 are not essential for its DNA replication in vivo.     

A family of arabinose-inducible Escherichia coli expression vectors having pBR322 copy control

The pBAD series of expression vectors have been widely used in Escherichia coli, Salmonella enterica, and related bacteria. However, a complication with pBAD24, the most popular of these plasmids, is that it does not contain the complete functional replication origin of pBR322 as was depicted in the original paper. Instead, pBAD24 has a pBR322-derived origin that lacks the rop gene that negatively regulates copy number and thus pBAD24 has an appreciably higher copy number than that of pBR322, particularly at elevated growth temperatures. A rop-containing derivative of pBAD24 (called pBAD322) having the copy number of pBR322 is reported together with derivatives of pBAD322 that encode resistance to chloramphenicol, kanamycin, tetracycline, spectinomycin/streptomycin, gentamycin, or trimethoprim in place of ampicillin.     

Intergeneric transfer and exchange recombination of restriction fragments cloned in pBR322: a novel strategy for the reversed genetics of the Ti plasmids of Agrobacterium tumefaciens

Transmission of ColE1/pMB1-derived plasmids, such as pBR322, from Escherichia coli donor strains was shown to be an efficient way to introduce these plasmids into Agrobacterium. This was accomplished by using E. coli carrying the helper plasmids pGJ28 and R64drd11 which provide the ColE1 mob functions and tra functions, respectively. For example, the broad host-range replication plasmid, pGV1150, a co-integrate plasmid between pBR322 and the W-type mini-Sa plasmid, pGV1106, was transmitted from E. coli to A. tumefaciens with a transfer frequency of 4.5 x 10(-3). As pBR322 clones containing pTiC58 fragments were unable to replicate in Agrobacterium, these clones were found in Agrobacterium only if the acceptor carried a Ti plasmid, thus allowing a co-integration of the pBR322 clones with the Ti plasmid by homology recombination. These observations were used to develop an efficient method for site-specific mutagenesis of the Ti plasmids. pTiC58 fragnents, cloned in pBR322, were mutagenized in vitro and transformed into E. coli. The mutant clones were transmitted from an E. coli donor strain containing pGJ28 and R64drd11 to an Agrobacterium containing a target Ti plasmid. Selecting for stable transfer of the mutant clone utilizing its antibiotic resistance marker(s) gave exconjugants that already contained a co-integrate plasmid between the mutant clone and the Ti plasmid. A second recombination can dissociate the co-integrate plasmid into the desired mutant Ti plasmid and a non-replicating plasmid formed by the vector plasmid pBR322 and the target Ti fragment. These second recombinants lose the second plasmid and they are identified by screening for the appropriate marker combination.