Validated sensitive spectrofluorimetric method for determination of antihistaminic drug azelastine HCl in pure form and in pharmaceutical dosage forms: application to stability study

A highly sensitive, simple and rapid spectrofluorimetric method was developed for the determination of azelastine HCl (AZL) in either its pure state or pharmaceutical dosage form. The proposed method was based on measuring the native fluorescence of the studied drug in 0.2 M H₂SO₄ at λ_em = 364 nm after excitation at λ_ex = 275 nm. Different experimental parameters were studied and optimized carefully to obtain the highest fluorescence intensity. The proposed method showed a linear dependence of the fluorescence intensity on drug concentration over a concentration range of 10–250 ng/mL, with a limit of detection of 1.52 ng/mL and limit of quantitation of 4.61 ng/mL. Moreover, the method was successfully applied to pharmaceutical preparations, with percent recovery values (± SD) of 99.96 (± 0.4) and 100.1 (± 0.52) for nasal spray and eye drops, respectively. The results were in good agreement with those obtained by the comparison method, as revealed by Student's t‐test and the variance ratio F‐test. The method was extended to study the stability of AZL under stress conditions, where the drug was exposed to neutral, acidic, alkaline, oxidative and photolytic degradation according to International Conference on Harmonization (ICH) guidelines. Copyright © 2016 John Wiley & Sons, Ltd.     

Determination of doxepin hydrochloride in spiked human plasma and capsule after derivatization with eosin Y using resonance Rayleigh scattering,second-order scattering and frequency doubling scattering methods

Doxepin hydrochloride (DOX) is a tricyclic antidepressant drug. Three sensitive spectrofluorimetric methods, namely resonance Rayleigh scattering (RRS), frequency doubling scattering (FDS) and second-order scattering (SOS), were developed and validated for their estimation of doxepin in spiked human plasma and formulation using liquid–liquid extraction method through the formation of an ion pair complex with eosin Y at a pH of 4.5. Various factors affecting fluorescence intensity were optimized, and the reaction kinetics was determined using the Arrhenius equation method. Different scattering methods such as RRS, FDS and SOS were developed at maximum scattering wavelengths λ_ex/λ_em = 567/567 nm for RRS, 720/360 nm for SOS and 260/520 nm for FDS, respectively. The methods exhibited high sensitivities, and the detection limits for DOX were found to be 0.82, 1.20 and 1.03 ng/ml for RRS, FDS and SOS methods, respectively. The FDS method exhibited the highest sensitivity. The methods were validated using the International Council for Harmonisation of Technical Requirements for Pharmaceuticals for Human Use guidelines and applied to determine DOX in capsule and spiked human plasma samples.     

A novel spectrofluorimetric method for determination of imatinib in pure,pharmaceutical preparation,human plasma,and human urine

The following paper represents a simple, highly sensitive, responsive validated and developed spectrofluorimetric method for estimation of imatinib (IMB) in its pure, commercial preparation, human urine and human blood plasma. The calibration curve was in the range 4–900 ng ml^?1 for pure form and urine and 8–900 ng ml^?1 for plasma in a medium contains carboxymethyl cellulose (CMC) and acetate buffer (pH 5) with excitation wavelength (λ_ex) 230 nm and emission wavelength (λ_em) 307 nm. The limit of detection (LOD) was 0.37 ng ml^?1 for the pure form, 0.64 ng ml^?1 for human urine, and 0.70 ng ml^?1 for human plasma, while the limit of quantitation (LOQ) was 1.2 for pure form, 1.91 for urine and 2.1 for plasma. The suggested method was successfully applied for evaluation of IMB in tablets within 99% mean percentage recovery. The excipients that are usually used as additives in pharmaceutical dosage form did not interfere with the suggested method. The method was efficiently used for estimation of IMB in human urine and human plasma. The effect of some cations that might be present in urine and plasma was also studied. The method was also focused on human volunteers and in vitro drug release.     

Pharmacokinetic evaluation of daclatasvir and ledipasvir in healthy volunteers using a validated highly sensitive spectrofluorimetric method

A simple, highly sensitive and selective spectrofluorimetric method has been developed and fully validated for the determination of daclatasvir (DAC) and ledipasvir (LED) in tablets and human plasma. The method is based on measurement of the native fluorescence in methanol at λ_em 384 nm after excitation at λ_ex 318 nm for DAC and in acetonitrile at λ_em 402 nm after excitation at λ_ex 340 nm for LED. The fluorescence intensity (FI) concentration plot was rectilinear over the ranges 1.2–12, 0.1–18 ng ml^?1 and 9–90, 1–100 ng ml^?1 with a good correlation of r = 0.9994 to r = 0.9997 in standard solution and human plasma for DAC and LED, respectively. The extraction of analytes from plasma was performed using methanol and acetonitrile as a precipitating agent with lower limit of quantification (LLOQ) of 0.1 and 1.0 ng ml^?1 for DAC and LED; respectively. The proposed method was validated according to the US Food and Drug Administration (FDA) guidelines and successfully applied for estimating the pharmacokinetic parameters of DAC and LED following oral administrations of their tablets.     

First derivative synchronous spectrofluorimetric method for the simultaneous determination of propofol and cisatracurium besylate in biological fluids

Propofol and cisatracurium besylate have been simultaneously determined using a highly sensitive first derivative synchronous spectrofluorometric method. The method is based on measuring first derivative synchronous spectrofluorimetric amplitude at Δλ = 40 nm with a scanning rate of 600 nm/min. The different experimental parameters affecting the fluorescence intensity of the two drugs were carefully studied and optimized. The amplitude–concentration plots were rectilinear over the range 40.0–400.0 ng/mL and 20.0–280.0 ng/mL for propofol and cisatracurium, respectively with lower detection limits of 4.0 and 2.35 ng/mL and quantification limits of 12.1 and 7.1 ng/mL for propofol and cisatracurium, respectively. The proposed method was successfully applied for the determination of the two compounds in synthetic mixtures and in commercial ampoules. The high sensitivity attained using the proposed method allowed the simultaneous determination of both drugs in spiked plasma samples. The mean % recoveries in spiked human plasma (n = 3) were 96.53 ± 0.90 and 96.20 ± 1.64 for each of propofol and cisatracurium, respectively. The method was validated in compliance with International Council of Harmonization (ICH) Guidelines.     

A novel spectrofluorimetric method for determination of lomefloxacin adopting on zinc(II) chelation strategy: Application in human plasma

A new sensitive and instantaneous spectrofluorimetric method for efficient determination of lomefloxacin (LMX) in its pure, dosage form and human plasma was designed. The developed method depends on formation of a metal-chelation compound of LMX as a ligand with zinc(II) in a buffer of acetate (pH 5.5). The following parameters; type of metal, concentration of metal, pH, type of buffer and diluting solvent were optimized. After carefully investigation; 0.2 mM zinc, 2.0 ml acetate buffer (pH 5.5) and water as diluting solvent were set as optimum reaction conditions. Under these conditions, a large increase in the intensity of the fluorescence of LMX was attained at 450 after excitation at 284 nm. The limits of detection and quantification were 5.8 and 1.9 ng ml⁻¹, respectively, with linearity range of 10.0 to 500.0 ng ml⁻¹. The binding mode of LMX and zinc(II) ion (Zn²⁺) was found to be 2:1, respectively, and confirmed by Job's plot method. Furthermore, it extended to the analysis of LMX in the spiked plasma of humans with percentage recovery (98.70 ± 0.97 to 100.30 ± 1.69%, n = 3).     

Development of sensitive spectrofluorimetric and spectrophotometric methods for the determination of duloxetine in capsule and spiked human plasma

A new, sensitive and selective spectrofluorimetric method has been developed for the determination of duloxetine (DLX) in capsule and spiked human plasma. DLX, as a secondary amine compound, reacts with 7‐chloro‐4‐nitrobenzofurazon (NBD‐Cl), a highly sensitive fluorogenic and chromogenic reagent used in many investigations. The method is based on the reaction between the drug and NBD‐Cl in borate buffer at pH 8.5 to yield a highly fluorescent derivative that is measured at 523 nm after excitation at 478 nm. The fluorescence intensity was directly proportional to the concentration over the range 50–250 ng/mL. The reaction product was also measured spectrophotometrically. The relation between the absorbance at 478 nm and the concentration is rectilinear over the range 1.0–12.0 µg/mL. The methods were successfully applied for the determination of this drug in pharmaceutical dosage form. The spectrofluorimetric method was also successfully applied to the determination of duloxetine in spiked human plasma. The suggested procedures could be used for the determination of DLX in pure form, capsules and human plasma being sensitive, simple and selective. Copyright © 2014 John Wiley & Sons, Ltd.     

Liquid chromatographic and spectrofluorimetric assays of empagliflozin: Applied to degradation kinetic study and content uniformity testing

Stability‐indicating high‐performance liquid chromatography (HPLC) and spectrofluorimetric methods were developed for determination of empagliflozin (EGF). EGF was subjected to oxidation, wet heat, photo‐degradation, acid hydrolysis and alkali hydrolysis. The alkaline degradation pathway was subjected to a kinetics study as the major product obtained after stress conditions. Arrhenius plots were constructed and the activation energies of the degradation process were calculated. HPLC was used for the kinetic study as it enabled simultaneous determination of EGF and the degradation product while the spectrofluorimetric assay was applied to content uniformity testing due to its higher sensitivity and lower limit of detection (LOD). Isocratic chromatographic elution was attained for HPLC on a Intersil® C₁₈ column (150 mm × 4 mm, 5 μm), using a mobile phase of acetonitrile–potassium dihydrogen phosphate buffer pH 4, (50:50, v/v) at a flow rate of 1 ml/min with ultraviolet (UV) detection at 225 nm. The relative fluorescence intensity was recorded by spectrofluorimeter applying synchronous mode using ?λ = 70 nm at 297.6 nm. Linearity ranges were found to be 5–50 μg/ml and 50–1000 ng/ml for HPLC and spectrofluorimetric methods, respectively.     

Simultaneous determination of amlodipine and metoprolol in their combined dosage form using a synchronous fluorescence spectrofluorimetric method

Highly sensitive, rapid, accurate and precise synchronous fluorescence spectrofluorimetric method has been developed for simultaneous analysis of a mixture of amlodipine (AMD) and metoprolol (MET). The method relies on measuring the relative synchronous fluorescence intensity of both drugs at Δλ of 90 nm in acetate buffer solution at pH 5. The experimental parameters influencing the developed method were investigated and optimized. The method was linear over the ranges 0.2–2 μg/ml and 0.5–10 μg/ml for AMD and MET, respectively. The limits of detection were 50 ng/ml for AMD and 130 ng/ml for MET while the limits of quantitation were 150 ng/ml for AMD and 390 ng/ml for MET. The developed method was applied successfully for the determination of the two drugs in their co‐formulated tablet. The mean percent recoveries were found to be 100.51 and 99.57 for AMD and MET, respectively.     

Validated spectrofluorimetric assay of two co-administered drug mixtures containing hydroxychloroquine with either moxifloxacin or ofloxacin as a drug regimen for hospital-acquired pneumonia in patients with COVID-19

Moxifloxacin and ofloxacin are two broad-spectrum quinolone antibiotics. They are among the most widely used antibiotics, at this time, applied to control the COVID-19 pandemic. Hydroxychloroquine is an FDA-approved drug for the treatment of COVID-19. This work describes a simple, green, selective, and sensitive spectrofluorimetric method for the assay of moxifloxacin and ofloxacin in the presence of hydroxychloroquine, two co-administered mixtures used in the treatment of hospital-acquired pneumonia in patients with COVID-19. Simultaneous assay of hydroxychloroquine and moxifloxacin was carried out in methanol using a direct spectrofluorimetric method (method I) at 375 and 550 nm, respectively, after excitation at 300 nm. The direct spectrofluorimetric assay was rectilinear over concentration ranges 50.0–400.0 and 300.0–2500.0 ng/ml for hydroxychloroquine and moxifloxacin, respectively, with limits of detection (LOD) of 6.4 and 33.64 ng/ml and limits of quantitation (LOQ) of 19.4 and 102.6 ng/ml, respectively, for the two drugs. The assay for hydroxychloroquine and ofloxacin was carried out by measuring the first derivative synchronous amplitude for hydroxychloroquine at the zero crossing point of ofloxacin and vice versa at Δλ = 140 nm (method II). Hydroxychloroquine was measured at 266 nm, while ofloxacin was measured at 340 nm over the concentration range 4–40 ng/ml for hydroxychloroquine and 200–2000 ng/ml for ofloxacin with LOD of 0.467 and 25.3 ng/ml and LOQ of 1.42 and 76.6 ng/ml, respectively, for the two drugs. The two methods were validated following International Conference on Harmonization guidelines and were applied to the analysis of the two drugs in plasma with good percentage recoveries (109.73–93.17%).     

Microenvironment improvement protocol for the sensitive spectrofluorimetric determination of an hepatitis C virus antiviral (Simeprevir): application to human plasma

Simeprevir (SPV) is a powerful antihepatitis C virus agent that was newly introduced into the pharmaceutical market. We here established and validated an easy, simple, and sensitive spectrofluorimetric method for its estimation at λ_em 427 nm (λ_ex 337 nm). The suggested procedure was based on two times enhancement in the original emission of SPV through modifying its microenvironment in buffered aqueous solution by adding Triton X‐100. The relationship between the concentration of SPV and the observed fluorescence intensity was linear in the range 0.06–1.0 μg ml^?1 with a correlation coefficient of 0.9997. The limits of detection and quantitation were 21 and 64 ng ml^?1, respectively. The present method was effectively applied to quantify SPV content in pharmaceutical tablets and human plasma spiked with the drug with no interference from tablet excipients or plasma components.     

Green spectrophotometric and spectrofluorimetric determination of biperiden hydrochloride using erythrosine B sensing probe

Erythrosine B (EB) is a food colorant antiviral xanthene dye that has many applications as a color additive in pharmaceuticals and cosmetics. Its use as a sensor for spectrofluorimetric and spectrophotometric analysis of amine-based pharmaceuticals renders many advantages because of its availability, low cost, rapid labeling, and high sensitivity. Herein, two fast and sensitive spectrofluorimetric and spectrophotometric methods were established for the estimation of the anti-Parkinson drug, biperiden (BIP) hydrochloride (HCl), in its raw material and tablet forms. The proposed methods depended on the interaction between the phenolic group of EB and the tertiary amino group of the studied analyte to form an ion-pair complex at pH 4 using the Britton Robinson buffer. The spectrofluorimetric method is based on the measurement of the quenching power of BIP HCl on the fluorescence intensity of EB at λ_ex/em = 527.0/550.9 nm. This method was rectilinear over the concentration range of 0.1–1.0 μg/mL with a limit of detection (LOD) = 0.017 μg/mL and a limit of quantification (LOQ) = 0.05 μg/mL. Meanwhile, the colorimetric method involved monitoring the absorbance of the formed ion-pair complex at 555 nm, showing a linearity range of 0.4–5.0 μg/mL with LOD = 0.106 μg/mL and LOQ = 0.322 μg/mL. The proposed methods were assessed for the greenness, indicating the greenness of the developed methods.     

Determination of marbofloxacin in plasma samples by high-performance liquid chromatography using fluorescence detection

A simple and sensitive HPLC method has been developed for the determination of marbofloxacin (MAR) in plasma. Sample preparations were carried out by adding phosphate buffer (pH 7.4, 0.1 M), followed by extraction with trichloromethane. MAR and the internal standard, enrofloxacin (ENR), were separated on a reversed-phase column and eluted with aqueous solution–acetonitrile (80:20). The fluorescence of the column effluent was monitored at λ_ex=338 and λ_em=425 nm. The retention times were 2.20 and 3.30 min for MAR and ENR, respectively. The method was shown to be linear from 15 to 1500 ng/ml (r²=0.999). The detection limit was 15 ng/ml. Mean recovery was determined as 90% by the analysis of plasma standards containing 150, 750, and 1500 ng/ml. Inter- and intra-assay precisions were 3.3% and 2.7%, respectively.     

Development of a highly sensitive high-performance liquid chromatographic method for measuring an anticancer drug, UCN-01, in human plasma or urine

We have established a highly sensitive high-performance liquid chromatographic method for the determination of an anticancer drug, UCN-01, in human plasma or urine. Using a fluorescence detector set at an excitation wavelength of 310 nm and emission monitored at 410 nm, there was a good linearity for UCN-01 in human plasma (r=0.999) or urine (r=0.999) at concentrations ranging from 0.2 to 100 ng/ml or 1 to 400 ng/ml, respectively. For intra-day assay, in plasma samples, the precision and accuracy were 1.8% to 5.6% and −10.0% to 5.2%, respectively. For inter-day assay, the precision and accuracy were 2.0% to 18.2% and 2.4% to 10.0%, respectively. In urine samples, the intra- and inter-day precision and accuracy were within 3.9% and ±2.7%, respectively. The lower limit of quantification (LLOQ) was set at 0.2 ng/ml in plasma and 1 ng/ml in urine. UCN-01 in plasma samples was stable up to two weeks at −80°C and also up to four weeks in urine samples. This method could be very useful for studying the human pharmacokinetics of UCN-01.     

Utilization of erythrosine B in spectrofluorimetric quenching analysis of amlodipine and perindopril in pharmaceutical and biological matrices

A spectrofluorimetric approach that is sensitive, simple, validated, and cost-effective has been proposed for the estimation of amlodipine (AML) and perindopril (PER) in their bulk powders, pharmaceutical formulations, and spiked human plasma. The recommended approach utilized the quantitative quenching effect of the two cited drugs on the fluorescence intensity of erythrosine B, as a result of complex binary reactions among each drug with erythrosine B at pH 3.5 (Teorell and Stenhagen buffer). The quenching of erythrosine B fluorescence was recorded at 554 nm after excitation at 527 nm. The calibration curve was detected in the range 0.25–3.0 μg ml⁻¹, with a correlation coefficient of 0.9996 for AML, and 0.1–1.5 μg ml⁻¹, with a correlation coefficient of 0.9996 for PER. The established spectrofluorimetric approach was validated for the estimation of the cited drugs with high sensitivity regarding International Council on Harmonization guidelines. Therefore, the established approach could be utilized for quality control of the cited drugs in their pharmaceutical formulations.     

Utility of Von Pechman synthesis of coumarin reaction for development of spectrofluorimetric method for quantitation of salmeterol xinafoate in pharmaceutical preparations and human plasma

Simple, precise and selective spectrofluorimetric technique was evolved for quantitation of selective β₂ agonist drug namely salmeterol xinafoate (SAL). Utilizing its phenolic nature, a method was described based on the reaction of the studied drug with ethyl acetoacetate (EAA) to yield extremely fluorescent coumarin product which can be detected at 480 nm (λ_ex = 420 nm). The procedure obeys Beer's law with a correlation coefficient of r = 0.9999 in the concentration range between 500 and 5000 ng ml^?1 with and 177 ng ml^?1 for limit of detection (LOD) and limit of quantification (LOQ), respectively. Diverse reaction variables influencing the firmness and formation of the coumarin product were accurately examined and modified to ensure greatest sensitivity of the procedure. The proposed technique was performed and examined according to the US Food and Drug Administration (FDA) guidelines for bio‐analytical methods and was efficiently applied for quantitation of SAL in both pharmaceutical preparations (% recovery = 100.06 ± 1.07) and spiked human plasma (% recovery = 96.64–97.14 ± 1.01–1.52).     

Spectrofluorimetric Method for the Determination of Doxepin Hydrochloride in Commercial Dosage Forms

A novel spectrofluorimetric method has been developed for the determination of doxepin hydrochloride in commercial dosage forms. The method is based on the fluorescent ion pair complex formation of the drug with eosin Y in the presence of sodium acetate–acetic acid buffer solution of pH 4.52 which is extractable in dichloromethane. The extracted complex showed fluorescence intensity at λ_em = 567 nm after excitation at 464 nm. The calibration curve was linear over the working range of 0.1–0.8 μg ml⁻¹. Under the optimized experimental conditions, present method is validated as per International Conference on Harmonization guidelines. The limit of detection for the developed method is 2.95 ng ml⁻¹. The method has been successfully applied to the determination of doxepin hydrochloride in commercial dosage forms. The results are compared with the reference spectrofluorimetric method.     

Automated high-performance liquid chromatographic method for the analysis of two novel ergoline compounds in human plasma

A rapid and sensitive high-performance liquid chromatographic method for the determination of the novel ergoline derivatives sergolexole (compound I), its acid metabolite (compound II) and cis-n-(2-hydroxycyclopentyl)-6-methyl-1-(1-methylethyl) ergoline-8-carboxamide (LY215840, compound III) in human plasma is reported. The compounds were extracted from plasma by automated solid-phase extraction and analysed on a reversed-phase C₈ column with fluorescence detection. The limit of quantification for all compounds was 10 ng/ml and the response was linear over the range 10–1000 ng/ml. Validation studies showed the method to be both repeatable and reproducible with no interference from human plasma. The method has been used to support pharmacokinetic studies and has proved to be robust and effective.     

A high-performance liquid chromatography assay with ultraviolet detection for olanzapine in human plasma and urine

Olanzapine is a commonly used atypical antipsychotic medication for which therapeutic drug monitoring has been proposed as clinically useful. A sensitive method was developed for the determination of olanzapine concentrations in plasma and urine by high-performance liquid chromatography with low-wavelength ultraviolet absorption detection (214 nm). A single-step liquid–liquid extraction procedure using heptane-iso-amyl alcohol (97.5:2.5 v/v) was employed to recover olanzapine and the internal standard (a 2-ethylated olanzapine derivative) from the biological matrices which were adjusted to pH 10 with 1 M carbonate buffer. Detector response was linear from 1–5000 ng (r²>0.98). The limit of detection of the assay (signal:noise=3:1) and the lower limit of quantitation were 0.75 ng and 1 ng/ml of olanzapine, respectively. Interday variation for olanzapine 50 ng/ml in plasma and urine was 5.2% and 7.1% (n=5), respectively, and 9.5 and 12.3% at 1 ng/ml (n=5). Intraday variation for olanzapine 50 ng/ml in plasma and urine was 8.1% and 9.6% (n=15), respectively, and 14.2 and 17.1% at 1 ng/ml (n=15). The recoveries of olanzapine (50 ng/ml) and the internal standard were 83±6 and 92±6% in plasma, respectively, and 79±7 and 89±7% in urine, respectively. Accuracy was 96% and 93% at 50 and 1 ng/ml, respectively. The applicability of the assay was demonstrated by determining plasma concentrations of olanzapine in a healthy male volunteer for 48 h following a single oral dose of 5 mg olanzapine. This method is suitable for studying olanzapine disposition in single or multiple-dose pharmacokinetic studies.     

Orthophthaldehyde as a fluorescent probe for the feasible and sensitive assay of heptaminol: application to dosage forms and real human plasma

The antihypotensive drug heptaminol was determined using a spectrofluorimetric method and ortho-phthaladehyde as a fluorescence probe. The drug was mixed with the reagent in the presence of 2-mercaptoethanol and the reaction was carried out in slightly alkaline aqueous solution containing 0.1 M sodium hydroxide. The resulting product exhibited high fluorescence activity that was measured at 451 nm after excitation at 334 nm. The linearity range of the method was 5–100 ng ml⁻¹ with a lower detection limit of 1.8 ng ml⁻¹. The procedure was evaluated according to the International Council of Harmonization guidelines. The proposed method was applied to analyze the drug in pharmaceutical tablets and oral drops. In addition, the present study represents the first spectrofluorimetric method for the determination of the cited drug in real human plasma. The method provided high recovery percentages without any interference from coexisting pharmaceutical excipients or the components of human plasma.