Nitrogen‐doped carbon dots as a fluorescent probe for the highly sensitive detection of Ag+ and cell imaging

An easy hydrothermal synthesis strategy was applied to synthesize green‐yellow emitting nitrogen‐doped carbon dots (N‐CDs) using 1,2‐diaminobenzene as the carbon source, and dicyandiamide as the dopant. The nitrogen‐doped CDs resulted in improvement in the electronic characteristics and surface chemical activities. N‐CDs exhibited bright fluorescence emission and could response to Ag⁺ selectively and sensitively. Other ions produced nearly no interference. A N‐CDs based fluorescent probe was then applied to sensitively determine Ag⁺ with a detection limit of 5 × 10^?8 mol/L. The method was applied to the determination of Ag⁺ dissolved in water. Finally, negligibly cytotoxic, excellently biocompatibile, and highly fluorescent carbon dots were applied for HepG2 cell imaging and the quenched fluorescence by adding Ag⁺, which indicated its potential applications.     

Silver nanoclusters stabilized with denatured fish sperm DNA and the application on trace mercury ions detection

In this study, fluorescent silver nanoclusters (Ag NCs) were synthesized using denatured fish sperm DNA as the template. In contrast to other methods, this method did not use artificial DNA as the template. After their reaction with denatured fish sperm DNA, Ag⁺ ions were reduced by NaBH₄ to form Ag NCs. The Ag NCs showed a strong fluorescence emission at 650 nm when excited at 585 nm. The fluorescence intensity increased fourfold at pH 3.78, controlled with Britton–Robinson buffer solution. The fluorescence of the Ag NCs was quenched in the presence of trace mercury ions (Hg²⁺) in a weakly acidic medium and nitrogen atmosphere. The extent of the fluorescence quenching of Ag NCs strongly depends on the Hg²⁺ ion concentration over a linear range from 2.0 nmol L^?1 to 3.0 μmol L^?1. The detection limit (3σ/k) for Hg²⁺ was 0.7 nmol L^?1. Thus, a sensitive and rapid method was developed for the detection of Hg²⁺ ions.     

Green synthesis of fluorescent carbon dots using chloroplast dispersions as precursors and application for Fe3+ ion sensing

Water‐soluble carbon dots (CDs) were synthesized using a one‐step hydrothermal treatment of chloroplast dispersions extracted from fresh leaves as a green carbon source. The CD solution showed an emission peak centred at 445 nm when excited at 300 nm. The synthesized CDs were uniform and monodispersed with an average size of 5.6 nm. When adding ferric(III) ions (Fe³⁺) to the solution of the original CDs, the fluorescence intensity decreased significantly. Based on the linear relationship between fluorescence intensity and concentration of Fe³⁺ ions, an effective method for rapid, sensitive and selective Fe³⁺ sensing in aqueous solution could be established. Under optimum conditions, the extent of the fluorescence quenching of prepared CDs strongly depended on the Fe³⁺ ions over a wide concentration range 1.0–100.0 μM with a detection limit (3σ/k) of 0.3 μM. Furthermore, the quantitative determination of Fe³⁺ ions in environmental water samples was realized.     

A ratiometric fluorescence sensor based on carbon quantum dots realized the quantitative and visual detection of Hg2+

In this paper, based on the fluorescence of carbon quantum dots (CQDs) quenched by mercury ions (Hg²⁺) and the nonresponse of Hg²⁺ to rhodamine B fluorescence, a dual emission ratio fluorescence sensor was constructed to realize the quantitative detection of Hg²⁺. Under excitation at 365 nm, the fluorescence spectrum showed double emission peaks at 437 nm and 590 nm, corresponding to the fluorescence emissions of CQDs and rhodamine B, respectively. This method quantitatively detected Hg²⁺ based on the linear relationship between the ratio of the intensities of the two emission peaks F₄₃₇/F₅₉₀ and the concentration of Hg²⁺. The detection range was 10–70 nM, and the limit of detection (S/N = 3) was 3.3 nM. In addition, this method could also realize the qualitative and semiquantitative detection of Hg²⁺ according to the fluorescence colour change of the probe under ultraviolet light. After various evaluations, the method could be successfully applied to the quantitative and visual detection of Hg²⁺ in tap water, and demonstrated excellent selectivity, anti-interference performance, and repeatability of the method.     

Polymer composite fluorescent hydrogel film based on nitrogen‐doped carbon dots and their application in the detection of Hg2+ ions

A simple microwave‐assisted solvothermal method was used to prepare fluorescent nitrogen‐doped carbon dots (N‐CDs) with high fluorescence quantum yield (79.63%) using citric acid and N‐(2‐hydroxyethyl)ethylenediamine as starting materials. The PVAm‐g‐N‐CDs grafted products were synthesized by amide bond formation between the carboxylic groups of N‐CDs and amine groups of polyvinylamine (PVAm). Fluorescent hydrogel films (PVAm‐g‐N‐CDs/PAM) were synthesized by interpenetration polymer network polymerization of PVAm‐g‐N‐CDs and acrylamide (AM). When used for ion detection, we found that the fluorescence of the hydrogel films was clearly quenched by addition of Hg²⁺. Repeatability tests on using the hydrogel films for Hg²⁺ detection showed that they could be applied at least three times. The PVAm‐g‐N‐CDs/PAM could serve as an effective fluorescent sensing platform for sensitive detection of Hg²⁺ ions with a detection limit of 0.089 μmol/L. This work may offer a new approach for developing recoverable and sensitive N‐CDs‐based sensors for biological and environmental applications.     

Differential action of Hg2+ and Cd2+ on the phycobilisomes and chlorophyll a fluorescence,and photosystem II dependent electron transport in the cyanobacterium Anabaena flos-aquae

The effect of equimolar concentrations of Hg²⁺ and Cd²⁺ on the whole cell absorption spectra, absorption spectra of the extracted phycocyanin (PC) and fluorescence emission spectra of phycobilisomes (PBS) was investigated in the cells of Anabaena flos-aquae. The PC component of the PBS was found to be extremely sensitive to the Hg²⁺ rather than the Cd²⁺ ions. Further, the results showed that Hg²⁺ and Cd²⁺ induced decrease in the rate of Hill activity (H₂O - DCPIP) was partially restored by the electron donor NH₂OH, not by the diphenyl carbazide. Similarly, chlorophyll a fluorescence emission in the presence of metals showed that addition of NH₂OH could effectively reverse the metal induced alterations in the fluorescence emission intensity. These results, together, suggested that Hg²⁺ and Cd²⁺ caused damage to the photosystems (PS) II reaction center. However, a relatively higher stimulation of the chlorophyll a emission at 695 nm with a red shift of 4.0 nm in the presence of Hg²⁺, and Cd²⁺ induced preferential decrease in the emission intensity at 676 nm as compared with the peak at 695 nm were indicative of the differential action of Hg²⁺ and Cd²⁺ on the PS II.     

Carbon dots-modified paper-based chemiluminescence device for rapid determination of mercury (II) in cosmetics

Here, a simple and portable paper-based analytical device (PAD) based on the inherent capability of carbon quantum dots (CQDs) to serve as a great emitter for the bis(2,4,6-trichlorophenyl)oxalate (TCPO)–hydrogen peroxide (H₂O₂) chemiluminescence (CL) reaction is introduced for the detection of harmful mercury ions (Hg²⁺). The energy is transferred from the unstable reaction intermediate (1,2-dioxetanedione) to CQDs, as acceptors, and an intensive orange-red CL emission is generated at ~600 nm, which is equal to the fluorescence emission wavelength of CQDs. The analytical applicability of this system was examined for the determination of Hg²⁺. It was observed that Hg²⁺ could significantly quench the produced emission, which can be attributed to the formation of a stable and nonluminescent Hg²⁺–CQDs complex. Accordingly, a simple and rapid PAD was established for monitoring Hg²⁺, with a limit of detection of 0.04 μg ml⁻¹. No interfering effect on the signal was found from other examined cations, indicating the acceptable specificity of the method. The designed assay was appropriately utilized to detect Hg²⁺ ions in cosmetic samples with high efficiency. It was characterized by its low cost, ease of use, and was facile but accurate and high selective for the detection of Hg²⁺ ions. In addition, the portability of this probe makes it suitable for on-site screening purposes.     

Nitrogen-rich silicon quantum dots: facile synthesis and application as a fluorescent ‘on–off–on’ probe for sensitive detection of Hg2+ and cyanide ions

The sensitive and reliable detection of Hg²⁺ and CN⁻ as harsh environmental contaminants are of great importance. In view of this, a novel ‘on–off–on’ fluorescent probe based on nitrogen-rich silicon quantum dots (NR-SiQDs) has been designed for sensitive detection of Hg²⁺ and CN⁻ ions in aqueous medium. NR-SiQDs were synthesized using a facile, one-step, and environment friendly procedure in the presence of 3-aminopropyl trimethoxysilane (APTMS) and ascorbic acid (AA) as precursors, with l -asparagine as a nitrogen source for surface modification. The NR-SiQDs exhibited strong fluorescence emission at 450 nm with 42.34% quantum yield, satisfactory salt tolerance, and superior photostability and pH stability. The fluorescence emission was effectively quenched using Hg²⁺ (turn-off) due to the formation of a nonfluorescent stable NR-SiQDs/Hg²⁺ complex, whereas after the addition of cyanide ions (CN⁻), Hg²⁺ ions could be leached from the surface of the NR-SiQDs and the fluorescence emission intensity of the quenched NR-SiQDs fully recovered (turn-on) due to the formation of highly stable [Hg(CN)₄]²⁻ species. After optimizing the response conditions, the obtained limits of detection were found to be 53 nM and 0.46 μM for Hg²⁺ and CN⁻, respectively. Finally, the NR-SiQD-based fluorescence probe was utilized to detect Hg²⁺ and CN⁻ ions in water samples and satisfactory results were obtained, suggesting its potential application for environmental monitoring.     

An integrated system of pyrene and rhodamine-6G for selective colorimetric and fluorometric sensing of mercury(II)

A pyrene and rhodamine-6G functionalized simple chemosensor L is studied toward sensing of metal ions in solution extensively. L shows selective color change from colorless to pink in the presence of Hg²⁺ in acetonitrile and the UV-Vis study shows peak at 525 nm with a ε value of 5.2 × 10⁴ M⁻¹ cm⁻¹ due to selective ring opening of rhodamine spirolactam moiety. The selective sensing of Hg²⁺ by L in the presence of other metal ions and reversible nature of “OFF-ON-OFF” functionality of L by Hg²⁺ and EDTA, respectively, are also established. The fluorescence study of L in the presence of Hg²⁺ shows emission at 550 nm when excited at 525 nm (ring opened rhodamine wavelength) or 340 nm (pyrene wavelength) in dry CH₃CN. Thus L acts as a selective colorimetric and fluorometric probe (dual probe) for the Hg²⁺ in solution. Metal ion sensing ability of L is also carried out in water as well as in aqueous Hepes buffer. These studies suggest that the fluorescence output of L in presence of Hg²⁺ in aqueous environment is apparently due to the generation of acid upon addition of Hg²⁺ salt in water.     

Prolonged incubation with low concentrations of mercury alters energy transfer and chlorophyll (Chl) a protein complexes in Synechococcus 6301: changes in Chl a absorption and emission characteristics and loss of the F695 emission band

Synechococcus PCC 6301 cells grown in the presence of low sublethal levels of (about 2 m) mercury induced alterations in chlorophyll (Chl) a absorption without significant alterations in phycocyanin. Chl a fluorescence emission in Hg²⁺ -raised cells showed a large (about 18 nm) blue shift in the peak emission. No major spectral changes in phycobilisome (PBsome) emission characteristic were noticed, indicating major structural alterations in Chl-protein complexes by incubation with Hg²⁺ ions. Low temperature (77 K) emission spectra of cells grown in the presence of Hg²⁺ showed a loss of the characteristic Chl a emission band at 695 nm (F695), which is known to be linked to photosystem II photochemistry and to originate from the Chl a of core antenna polypeptide CP 47 of photosystem II. The SDS-PAGE polypeptide profile of thylakoids indicates a loss of a polypeptide(s) with a molecular mass between 40 and 60 k Da by Hg²⁺ incubation of cells. Our results suggest that prolonged incubation of Synechococcus 6301 cells with low concentrations of Hg²⁺ affects the Chl a spectral properties and the structure of Chl-protein complexes.     

Metal ion-mediated carbon dot nanoprobe for fluorescent turn-on sensing of N-acetyl-l-cysteine

In this work, carbon dots (CDs) was easily synthesized from aspartic acid through a pyrolysis method. Based on their favourable fluorescence properties, CDs were utilized to design a metal ion-mediated fluorescent probe for N-acetyl-l -cysteine (NAC) detection. The fluorescence intensity of CDs was firstly quenched by manganese ions (Mn²⁺) through static quenching effect and subsequently restored by NAC via the combination with Mn²⁺ due to the coordination effect. Therefore, the fluorescent turn-on sensing of NAC was actuated based on the fluorescence quenching stimulated by Mn²⁺ and recovery induced by coordination. The fluorescence recovery efficiencies showed a proportional range to the concentration of NAC in the range 0.04–5 mmol L⁻¹ and the detection limit was 0.03 mmol L⁻¹. Furthermore, this metal ion-mediated fluorescent nanoprobe was applied to human urine sample detection and the standard recovery rates were located in the range 97.62–102.34%. This was the first time that Mn²⁺ was used to construct a fluorescent nanoprobe for NAC. Compared with other heavy metal ions, Mn²⁺ with good biosecurity prevented the risk of application, which made the nanoprobe green and biopractical. The facile synthesis of CDs and novel metal ion-mediated sensing mode made it a promising method for pharmaceutical analysis.     

Simple and cheap preparation of fluorescence paper sensor based in carbon dot for visual detection of chloramphenicol

Carbon dots (CDs) are nanometer-scale particles produced from carbon sources that exhibit fluorescence emission. The present work presents the synthesis and characterization of CDs, as well as the sensing studies for the determination of chloramphenicol (CAP). CAP is an antibiotic used in human medicine and agriculture, and its indiscriminate use and inappropriate disposal have caused damage to human health and the environment. The carbonaceous precursor used in the synthesis of CDs was 3,4-diaminobenzoic acid (3,4-DABA) through the hydrothermal method via domestic microwave irradiation. The first synthesis procedure was carried out in the presence of water/ethanol (a-CDs) and the second in the presence of 1 mol/L sodium hydroxide/ethanol (b-CDs). The CDs were initially characterized in terms of spectroscopic properties in the ultraviolet and visible region (UV-visible), Fourier-transform infrared (FTIR) spectra, Raman spectroscopy, and fluorescence emission spectroscopy. Sensing studies for the antibiotic C were performed by fluorescence suppression in the presence of a- and b-CDs, as well as the precursor 3,4-DABA. The a- and b-CDs presented similar values of linear range 0.00080–0.0050 mg/ml and limit of detection (LOD) = 0.00030 mg/ml (0.30 ppm) for CAP. Then, a- and b-CDs were embedded in Whatman and Mellita® filter paper, and CAP sensing was evaluated through UV light excitation.     

Prevention by Ce3+ of DNA destruction caused by Hg2+ in fish intestine

The interactions between Hg²⁺, Ce³⁺, and the mixuure of Ce³⁺ and Hg²⁺, and DNA from fish intestine in vitro were investigated by using absorption spectrum and fluorescence emission spectrum. The ultraviolet absorption spectra indicated that the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ to DNA generated an obviously hypochromic effect. Meanwhile, the peak of DNA at 205.2 nm blue-shifted and at 258.2 nm red-shifted. The size of the hypochromic effect and the peak shift of DNA by metal ion treatments was Hg²⁺>Hg²⁺+Ce³⁺>Ce³⁺. The fluorescence emission spectra showed that with the addition of Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ the emission peak at about 416.2 nm of DNA did not obviously change, but the intensity reduced gradually and the sequence was Hg²⁺>Hg²⁺+Ce²⁺>Ce³⁺. Hg²⁺, Ce³⁺, and the mixture of Ce³⁺ and Hg²⁺ had 1.12, 0.19, and 0.41 binding sites to DNA, respectively; the fluorescence quenching of DNA caused by the metal ions all attributed to static quenching. The binding constants (K _A ) of binding siees were 8.98×10⁴ L/mol and 1.02×10⁴ L/mol, 5.12×10⁴ L/mol and 1.10×10³ L/mol, 6.66×10⁴ L/mol and 2.36×10³ L/mol, respectively. The results showed that Ce³⁺ could relieve the destruction of Hg²⁺ on the DNA structure.     

Detection of metronidazole in honey and metronidazole tablets using carbon dots‐based sensor via the inner filter effect

In this work, carbon dots (CDs) with a high quantum yield (22.3%) were easily prepared by hydrothermal pyrolysis of acid fuchsin 6B and hydrogen peroxide at 180°C for 10 h. The resultant CDs possess a narrow size distribution in the range of 2.6 to 3.2 nm and emit blue fluorescence. Interestingly, the absorption band of metronidazole (MTZ) centered at 318 nm can complementary overlap with the excitation band of the as‐prepared CDs centered at 320 nm, resulting in an inner filter effect (IFE) in high efficiency. In fact, the fluorescence quenching of the CDs depends on the concentration of MTZ. Therefore, a simple method for the detection of MTZ can be established using the CDs‐based sensor via the IFE. The linear range of the proposed method was 0–10 μg mL^?1 with the limit of detection as low as 0.257 μg mL^?1. This CDs‐based sensor had been applied for the detection of MTZ in honey and MTZ tablets with the recoveries in the range of 98.0% to 105.1% and 95.7% to 106.5%, respectively. Therefore, the as‐prepared CDs have a potential to be developed as a MTZ sensor with high selectivity, sensitivity and accuracy.     

The effect of faba bean extrusion on the growth performance,nutrient utilization,metabolizable energy,excretion of sialic acids and meat quality of broiler chickens

Soybean meal in broiler chicken diets can partly be replaced by faba bean seeds. Unfortunately, high levels of antinutritional factors and resistant starch found in these seeds can have a detrimental impact on both broiler chickens’ performance and nutrient digestibility. It is, however, possible to increase the usefulness of faba bean for broiler nutrition by a technological process known as extrusion. In this study, the authors made and attempt to investigate the effect of different forms of faba bean seeds (raw or extruded) on broiler chicken performance, nitrogen-corrected apparent metabolizable energy values (AME_N), nutrient utilization and meat quality, as well as on the excretion of total and free sialic acids. In the trial, the total of 160 1-day-old male broiler chicks of the Ross 308 strain were used. Experimental birds were randomly assigned to two dietary treatments, each containing 10 replication (floor pens); one replication included nine birds. The first group contained 300 g/kg diet of raw faba bean seeds, whereas the second group – 300 g/kg diet of extruded faba bean seeds. The applied extrusion process was found to exert a positive impact and led to a decrease in phytic phosphorus, H, NDF, ADF and resistant starch content in studied faba bean seeds. Experimental birds fed diets containing extruded faba bean seeds were characterized by a lower feed intake (2299 g) and feed conversion ratios (FCRs) (1.52 g/g) in comparison with the other group (feed intake 2466 g; FCR 1.61 g/g). Extrusion of faba bean seeds improved dry matter retention, dietary AME_N value, apparent ileal digestibility of dry matter and starch, as well as most amino acids. In addition, the above-mentioned process resulted in a decrease in the excretion of total and free sialic acids. Extruded faba bean seeds failed to have a significant impact on broiler meat quality. It was concluded that application of extrusion can increase the use of faba bean seeds in broiler chicken nutrition.     

Highly fluorescent carbon dots from wheat bran as a novel drug delivery system for bacterial inhibition

In this study, we prepared carbon dots (CDs) from wheat bran via hydrothermal treatment at 180°C for 3 h. The prepared CDs showed blue‐green fluorescence under UV light. The fluorescence emission study of the CDs revealed that they showed maximum fluorescence emission at 500 nm. The prepared CDs showed a high quantum yield of 33.23%. Solvent‐dependent fluorescence emission analysis of the CDs was performed to study the variation in fluorescence emission characteristics with solvent polarity. The prepared CDs were conjugated with amoxicillin (AMX) to explore its potential for use as a drug delivery agent for AMX. The drug release profile of the CD–AMX conjugates was analyzed at different pH (5.0, 6.8 and 7.2) to study drug release kinetics. CD–AMX conjugates showed notable bacterial inhibition against Gram‐positive (S. aureus) and Gram‐negative (E. coli) strains with minimal cytotoxic effects, indicating its potential as a promising antibacterial drug delivery system.     

Study of fluorescence quenching of mercaptosuccinic acid‐capped CdS quantum dots in the presence of some heavy metal ions and its application to Hg(II) ion determination

In this study, CdS quantum dots (QDs) capped with mercaptosuccinic acid (MSA) were prepared in one step. The size, shape, component and spectral properties of MSA‐capped CdS QDs were characterized by transmission electron microscopy (TEM), photoluminescence (PL) and infrared (IR) spectrometry. The results showed that the prepared QDs with an average diameter of 6 nm have favorable fluorescence, which is greatly influenced by the pH of the environment. The interaction of some heavy metal ions including Ag⁺, Hg²⁺, Cu²⁺, Ni²⁺ and Co²⁺ with MSA‐capped CdS QDs was investigated in different buffering pH media. Based on the fluorescence quenching of the QDs in the presence of each of the metal ions, the feasibility of their determinations was examined according to the Stern–Volmer equation. The investigations showed that Hg(II) ions can be determined in the presence of many co‐existing metal ions at a buffering pH of 5. This method was satisfactorily applied to the measurement of Hg(II) ions in some environmental samples. Copyright © 2014 John Wiley & Sons, Ltd.     

A new fluorescent chemosensor for Hg2+ in aqueous solution

We prepared an aminothiourea‐derived Schiff base (DA) as a fluorescent chemosensor for Hg²⁺ ions. Addition of 1 equiv of Hg²⁺ ions to the aqueous solution of DA gave rise to an obvious fluorescence enhancement and the subsequent addition of more Hg²⁺ induced gradual fluorescence quenching. Other competing ions, including Pb²⁺, Cd²⁺, Cr³⁺, Zn²⁺, Fe²⁺, Co³⁺, Ni²⁺, Ca²⁺, Mg²⁺, K⁺ and Na⁺, did not induce any distinct fluorescence changes, indicating that DA can selectively detect Hg²⁺ ions in aqueous solution. Copyright © 2012 John Wiley & Sons, Ltd.     

A red fluorescent carbon dots with good water solubility for rapid detection of Al3+ in actual samples

We developed a facile strategy for the fabrication of red fluorescent carbon nanodots (R-CDs) and demonstrated their applications for Al³⁺ sensing. Red-emission carbon dots (CDs) were synthesized using a simple hydrothermal treatment with citric acid and urea as precursors, manifesting intriguing red-emission behaviour at 610 nm. With increasing Al³⁺ concentration, the fluorescence band at 610 nm decreased gradually. Monitoring the intrinsic fluorescence variation (I_610nm), as-prepared CDs were developed as an effective platform for fluorescent Al³⁺ sensing, with a linear range of 0.5–60.0 μM and a detection limit of 3.0 nM. More importantly, R-CDs have been applied successfully to the analysis of Al³⁺ in actual samples with satisfactory recoveries in the range 97.12–102.05%, which indicated that obtained CDs could be implemented as an effective tool for the identification and detection of Al³⁺ in actual samples.     

Carbamodithioate‐based fluorescent chemosensor for Hg(II): a staged response approach and investigation into the sensing mechanism

Carbamodithioate‐based compound C1 was designed and synthesized as a new fluorescent probe for Hg²⁺ ions. Upon the addition of Hg²⁺ ions, it displayed a rare staged response: the emission spectra of C1 first showed an apparent red‐shift, followed by a dramatic decrease. To investigate the sensing mechanism, control compounds C2 with the same phenanthroimidazole unit and C3 with the same carbamodithioate functionality were synthesized. On comparison, the first step sensing process was ascribed to decreasing photoinduced electron transfer on the coordination of Hg²⁺ with the lone pair electrons of the nitrogen atom on the phenanthroimidazole ring. The affinity of Hg²⁺ and the carbamodithioate unit with four sulfur atoms then induced changes in intramolecular charge transfer efficiency and the second step fluorescent response.