Conformational switching in the flagellar filament of Salmonella typhimurium.

The flagellar filament of the mutant Salmonella typhimurium strain SJW814 is straight, and has a right-handed twist like the filament of SJW1655. Three-dimensional reconstructions from electron micrographs of ice-embedded filaments reveal a flagellin subunit that has the same domain organization as that of SJW1655. Both show slight changes from the domain organization of the subunits from SJW1660, which possesses a straight, left-handed filament. This points to the possible role of changes in subunit conformation in the left-to-right-handed structural transition in filaments. Comparison of the left and right-handed filaments shows that the subunit's orientation and intersubunit bonding appear to change. The orientation of the subunit in the SJW814 filament is intermediate between that of SJW1655 and SJW1660. Its intermediate orientation may explain why the filaments of SJW1655 and SJW1660 are locked in one conformation, whereas the filament of SJW814 can be induced to switch by, for example, changes in pH and ionic strength.     

Three-dimensional structure of the frozen-hydrated flagellar filament. The left-handed filament of Salmonella typhimurium

Electron micrographs of frozen-hydrated preparations of flagellar filaments of Salmonella typhimurium were used to obtain a three-dimensional reconstruction of the structure. The filaments were obtained from the mutant SJW1660, which produces straight, left-handed filaments. The subunits in this filament are thought to be all in the L-state. The structure consists of a set of 11 longitudinal segmented rods of density that lie at a radius of 70 A. The outermost feature of the filament is a set of knobs of density that project outward from the rods. The interior of the filaments consists of arms that extend inward radially from the segmented rods. The 11 segmented rods and their interconnections are noteworthy because current theories regarding filament structure involve switching of subunits between the L and R states co-operatively along the directions of the rods.     

Sequence analysis of operator mutants of the phase-1 flagellin-encoding gene, fliC, in Salmonella typhimurium

In phase-2 cells of diphasic Salmonella strains, expression of the phase-1 flagellin-encoding gene, fliC, is repressed by the repressor encoded by the fljA gene. Nine operator-constitutive (Oc) mutants of fliC were isolated from S. typhimurium by selecting those which could express fliC in the presence of the repressor. Among them, eight mutants could express fliC both in the presence and the absence of the repressor, whereas the ninth one could express only in the presence of the repressor. Nucleotide sequence analysis revealed that the Oc mutations of the former type were all located between bp 7 and 20 upstream from the coding region of fliC, which suggests that this region may correspond to the operator for fliC. The latter mutant was found to have a tandem duplication of 28 bp which contains a part of the operator sequence, and seems to require the repressor to activate fliC expression.     

The flagellar filament of Rhodobacter sphaeroides: pH-induced polymorphic transitions and analysis of the fliC gene

Flagellar motility in Rhodobacter sphaeroides is notably different from that in other bacteria. R. sphaeroides moves in a series of runs and stops produced by the intermittent rotation of the flagellar motor. R. sphaeroides has a single, plain filament whose conformation changes according to flagellar motor activity. Conformations adopted during swimming include coiled, helical, and apparently straight forms. This range of morphological transitions is larger than that in other bacteria, where filaments alternate between left- and right-handed helical forms. The polymorphic ability of isolated R. sphaeroides filaments was tested in vitro by varying pH and ionic strength. The isolated filaments could form open-coiled, straight, normal, or curly conformations. The range of transitions made by the R. sphaeroides filament differs from that reported for Salmonella enterica serovar Typhimurium. The sequence of the R. sphaeroides fliC gene, which encodes the flagellin protein, was determined. The gene appears to be controlled by a sigma(28)-dependent promoter. It encodes a predicted peptide of 493 amino acids. Serovar Typhimurium mutants with altered polymorphic ability usually have amino acid changes at the terminal portions of flagellin or a deletion in the central region. There are no obvious major differences in the central regions to explain the difference in polymorphic ability. In serovar Typhimurium filaments, the termini of flagellin monomers have a coiled-coil conformation. The termini of R. sphaeroides flagellin are predicted to have a lower probability of coiled coils than are those of serovar Typhimurium flagellin. This may be one reason for the differences in polymorphic ability between the two filaments.     

Role of gene flaFV on flagellar hook formation in Salmonella typhimurium.

Nine temperature-sensitive nonflagellate mutants defective in flaFV were isolated from a strain of Salmonella typhimurium. Among them three mutants were found to produce flagella with abnormally shaped (either straight or irregularly curved) hooks at the permissive temperature. Two mutations that rendered hooks straight were located in one of the eight segments of flaFV defined by deletion mapping. The mutation that rendered hooks irregularly curved was located in a different segment. An flaR mutation was introduced into the latter mutant. At the permissive temperature, the resulting double mutant produced polyhooks whose wavelength and amplitude were both exceedingly reduced. These polyhook structures were more thermolabile than those of the flaFV+ strain. Hook protein of the former strain was shown to have a slightly positive electric charge compared with that of the latter. From these results and other available information, it is inferred that flaFV is the structural gene for the hook protein in Salmonella.     

Conversion of the Salmonella phase 1 flagellin gene fliC to the phase 2 gene fljB on the Escherichia coli K-12 chromosome.

The Escherichia coli-Salmonella typhimurium-Salmonella abortus-equi hybrid strain EJ1420 has the two Salmonella flagellin genes fliC (antigenic determinant i) and fljB (determinant e,n,x) at the same loci as in the Salmonella strains and constitutively expresses the fliC gene because of mutations in the genes mediating phase variation. Selection for motility in semisolid medium containing anti-i flagellum serum yielded 11 motile mutants, which had the active fliC(e,n,x) and silent fljB(e,n,x) genes. Genetic analysis and Southern hybridization indicated that they had mutations only in the fliC gene, not in the fljB gene or the control elements for phase variation. Nucleotide sequence analysis of the fliC(e,n,x) genes from four representative mutants showed that the minimum 38% (565 bp) and maximum 68% (1,013 bp) sequences of the fliC(i) gene are replaced with the corresponding sequences of the fljB(e,n,x) gene. One of the conversion endpoints between the two genes lies somewhere in the 204-bp homologous sequence in the 5' constant region, and the other lies in the short homologous sequence of 6, 8, or 38 bp in the 3' constant region. The conversions include the whole central variable region of the fljB gene, resulting in fliC(e,n,x) genes with the same number of nucleotides (1,503 bp) as the fljB gene. We discuss the mechanisms for gene conversion between the two genes and also some intriguing aspects of flagellar antigenic specificities in various Salmonella serovars from the viewpoint of gene conversion.     

Sequence of the phosphomannose isomerase-encoding gene of Salmonella typhimurium

The pmi gene, encoding phosphomannose isomerase, of Salmonella typhimurium, was cloned in Escherichia coli K-12, and the protein product visualised in minicells. The cloned gene was sequenced; there was 77.4% nucleotide homology between the cloned pmi gene and the analogous manA gene of E. coli K-12, and 86.2% amino acid sequence homology between their presumptive gene products.     

Translation inhibition of the Salmonella fliC gene by the fliC 5' untranslated region, fliC coding sequences, and FlgM

The 5'-untranslated region (5'UTR) of the fliC flagellin gene of Salmonella contains sequences critical for efficient fliC mRNA translation coupled to assembly. In a previous study we used targeted mutagenesis of the 5' end of the fliC gene to isolate single base changes defective in fliC gene translation. This identified a predicted stem-loop structure, SL2, as an effector of normal fliC mRNA translation. A single base change (-38C:U) in the fliC 5'UTR resulted in a mutant that is defective in fliC mRNA translation and was chosen for this study. Motile (Mot+) revertants of the -38C:T mutant were isolated and characterized, yielding several unexpected results. Second-site suppressors that restored fliC translation and motility included mutations that disrupt a RNA duplex stem formed between RNA sequences in the fliC 5'UTR SL2 region (including a precise deletion of SL2) and bases early within the fliC-coding region. A stop codon mutation at position 80 of flgM also suppressed the -38C:T motility defect, while flgM mutants defective in anti-sigma28 activity had no effect on fliC translation. One remarkable mutation in the fliC 5'UTR (-15G:A) results in a translation defect by itself but, in combination with the -38C:U mutation, restores normal translation. These results suggests signals intrinsic to the fliC mRNA that have both positive and negative effects on fliC translation involving both RNA structure and interacting proteins.     

The covalent structure of the phase-1 flagellar filament protein of Salmonella typhimurium and its comparison with other flagellins

In order to circumvent problems associated with direct chemical analysis of the phase-1 flagellar filament protein (flagellin) of Salmonella typhimurium, the covalent structure was determined by recombinant DNA procedures. The corresponding structural gene (H-1i) was cloned into plasmid pBR322 in a 4.3-kilobase fragment produced by EcoRI digestion of chromosomal DNA, and the nucleotide sequence of the region specifying the flagellar protein was determined. Comparison of the data obtained with the limited information available for other salmonellar flagellins supported the concept that both ends of the molecule are conserved in this genus. Additionally, a conservation of base sequence in the region of H-1 genes coding for the N-terminal end of flagellins was apparent, suggesting that this area may have an additional regulatory role. The i flagellin was found to be unrelated to proteins in the NBRF data base with the exception of other flagellins. The three flagellins which have been sequenced to date (those produced by Bacillus subtilis, Caulobacter crescentis, and phase-1 S. typhimurium) show homologies in amino acid sequence at both the N-terminal and C-terminal ends despite large differences in their total molecular weight, and comparison suggests that B. subtilis and Salmonella are more closely related to each other than either is to Caulobacter.     

Stoichiometric analysis of the flagellar hook-(basal-body) complex of Salmonella typhimurium

The stoichiometries of components within the flagellar hook-(basal-body) complex of Salmonella typhimurium have been determined. The hook protein (FlgE), the most abundant protein in the complex, is present at approximately 130 subunits. Hook-associated protein 1 (FlgK) is present at approximately 12 subunits. The distal rod protein (FlgG) is present at approximately 26 subunits, while the proximal rod proteins (FlgB, FlgC and FlgF) are present at only approximately six subunits each. The stoichiometries of the proximal rod proteins and hook-associated protein 1 are, within experimental error, consistent with values of 5 or 6, and 11, respectively. Such values would correspond to either one or two turns of a helical structure with a basic helix of approximately 5.5 subunits per turn, which is the geometry of both the hook and the filament and, one supposes, the rod and hook-associated proteins. These stoichiometries may derive from rules for the heterologous interactions that occur when a helical structure consists of successive segments constructed from different proteins; the stoichiometries within the hook and the distal portion of the rod must, however, be set by different mechanisms. The stoichiometries for the ring proteins are approximately 26 subunits each for the M-ring protein (FliF), the P-ring protein (FlgI), and the L-ring protein (FlgH); the protein responsible for the S-ring feature is not known. The rings presumably have rotational rather than helical symmetry, in which case the stoichiometries would be directly constrained by the intersubunit bonding angle. The ring stoichiometries are discussed in light of other information concerning flagellar structure and function.     

Substructure of the flagellar basal body of Salmonella typhimurium.

The Salmonella typhimurium basal body, a part of the flagellar rotary motor, consists of four rings (denoted M, S, P and L) and a coaxial rod. Using low-dose electron microscopy and image averaging methods on negatively stained and frozen-hydrated preparations, we examined whole basal body complexes and subcomplexes obtained by dissociation in acid. Dissociation occurs in steps, allowing us to obtain images of substructures lacking the M ring, lacking the M and S rings, and lacking the M and S rings and the proximal portion of the rod. We obtained images of the L and P ring subcomplex. The existence of a subcomplex missing only the M ring suggests either that the S and M rings derive from two different proteins, or that the M ring is a labile domain of a single protein, which makes up both rings. At the 25 to 30 A resolution of our averaged images, the L, P and S rings appear cylindrically symmetric. Images of the M ring show variability that may be due to differences in angular orientation of the grid, but equally could be due to structural variations. Three-dimensional reconstructions of these structures from the averaged images reveal the internal structure and spatial organization of these components.     

Identification and characterization of the products of six region III flagellar genes (flaAII.3 through flaQII) of Salmonella typhimurium.

A portion of flagellar region III of the Salmonella typhimurium genome has been cloned and shown to contain six genes: flaAII.3, flaAIII, flaS, flaR, flaQI, and flaQII. Of these, all but flaQI were known to exist from mutant studies; the former flaQ has been renamed flaQII. The genes were shown by minicell analysis to encode proteins with apparent molecular masses of 28, 48, 15, 46, 17, and 37 kilodaltons, respectively. The presence of a flagellar-gene-specific promoter in the vicinity of flaQI was established by testing expression of the plasmid-encoded tetracycline resistance gene in artificial constructions. In minicell preparations, the flaAII.3 and flaR products were found principally in the cytoplasmic fraction; the rest were found principally in the membrane fraction. A comparison between the homologous genes of S. typhimurium and Escherichia coli confirmed that their genomic organizations were similar and that their products had similar molecular masses and isoelectric points.     

Subdivision of flagellar region III of the Escherichia coli and Salmonella typhimurium chromosomes and identification of two additional flagellar genes.

The many genes involved in flagellar structure and function in Escherichia coli and Salmonella typhimurium are located in three major clusters on the chromosome: flagellar regions I, II and III. We have found that region III does not consist of a contiguous set of flagellar genes, as was thought, but that in E. coli there is almost 7 kb of DNA between the filament cap gene, fliD, and the next known flagellar gene, fliE; a similar situation occurs in S. typhimurium. Most of this DNA is unrelated to flagellar function, since a mutant in which 5.4 kb of it had been deleted remained fully motile and chemotactic as judged by swarming on semi-solid agar. We have therefore subdivided flagellar region III into two regions, IIIa and IIIb. The known genes in region IIIa are fliABCD, all of which are involved in filament structure and assembly, while region IIIb contains genes fliEFGHIJKLMNOPQR, all of which are related to formation of the hook (basal-body)-complex or to even earlier assembly events. We have found that fliD, the last known gene in region IIIa, is immediately followed by two additional genes, both necessary for flagellation, which we have designated fliS and fliT. They encode small proteins with deduced molecular masses of about 15 kDa and 14 kDa, respectively. The functions of FliS and FliT remain to be determined, but they do not appear to be members of the axial family of structural proteins to which FliD belongs.     

Characterization of the fliL gene in the flagellar regulon of Escherichia coli and Salmonella typhimurium.

filL is a small gene of unknown function that lies within the beginning of a large flagellar operon of Salmonella typhimurium and Escherichia coli. A spontaneous fliL mutant of S. typhimurium, containing a frameshift mutation about 40% from the 3' end of the gene, was moderately motile but swarmed poorly, suggesting that FliL might be a component of the flagellar motor or switch. However, in-frame deletions of the E. coli gene, including an essentially total deletion, had little or no effect on motility or chemotaxis. Thus, FliL does not appear to have a major role in flagellar structure or function and is therefore unlikely to be a component of the motor or switch; the effect on motility caused by truncation of the gene is probably an indirect one.