Implications of emissions timing on the cost‐effectiveness of greenhouse gas mitigation strategies: application to forest bioenergy systems

Conventional cost‐effectiveness calculations ignore the implications of greenhouse gas (GHG) emissions timing and thus may not properly inform decision‐makers in the efficient allocation of resources to mitigate climate change. To begin to address this disconnect with climate change science, we modify the conventional cost‐effectiveness approach to account for emissions timing. GHG emissions flows occurring over time are translated into an ‘Equivalent Present Emission’ based on radiative forcing, enabling a comparison of system costs and emissions on a consistent present time basis. We apply this ‘Present Cost‐Effectiveness’ method to case studies of biomass‐based electricity generation (biomass co‐firing with coal, biomass cogeneration) to evaluate implications of forest carbon trade‐offs on the cost‐effectiveness of emission reductions. Bioenergy production from forest biomass can reduce forest carbon stocks, an immediate emissions source that contributes to atmospheric greenhouse gases. Forest carbon impacts thereby lessen emission reductions in the near‐term relative to the assumption of biomass ‘carbon neutrality’, resulting in higher costs of emission reductions when emissions timing is considered. In contrast, conventional cost‐effectiveness approaches implicitly evaluate strategies over an infinite analytical time horizon, underestimating nearer term emissions reduction costs and failing to identify pathways that can most efficiently contribute to climate change mitigation objectives over shorter time spans (e.g. up to 100 years). While providing only a simple representation of the climate change implications of emissions timing, the Present Cost‐Effectiveness method provides a straightforward approach to assessing the cost‐effectiveness of emission reductions associated with any climate change mitigation strategy where future GHG reductions require significant initial capital investment or increase near‐term emissions. Timing is a critical factor in determining the attractiveness of any investment; accounting for emissions timing can better inform decisions related to the merit of alternative resource uses to meet near‐, mid‐, and long‐term climate change mitigation objectives.     

Effect of improved nitrogen management on greenhouse gas emissions from intensive dairy systems in the Netherlands

Dairy systems in Europe contribute to the emissions of the greenhouse gases (GHGs) nitrous oxide (N₂O), methane (CH₄) and carbon dioxide (CO₂). In this paper, the effects of improved nitrogen (N) management on GHG emissions from Dutch dairy farms are determined. The GHG emissions are calculated using the panel on climate change (IPCC) methodology for the Netherlands, an updated and refined IPCC methodology, and a full accounting approach. The changes in dairy farming over the last 20 years, and the consequences for N management are described using detailed farm‐level data, collected in 1985, 1997 and 2002. The selected years represent distinct stages in the implementation of N policies. The changes in N management have reduced the GHG emissions. A reduction of the N surplus per kilogram milk with 1 g N reduced the GHG emissions per kilogram milk with approximately 29 g CO₂‐equivalents. The reduction of the N surpluses was mainly brought about by reduced fertilizer use and reduced grazing time. The use of updated and refined emission factors resulted in higher CH₄ emissions and lower N₂O emissions. On average, the overall emission was 36% higher with the refined method. Full accounting, including all direct and indirect emissions of CH₄, N₂O and CO₂, increased the emission with 36% compared with the refined IPCC methodology. We conclude that the N surplus at farm level is a useful indicator of GHG emissions. A full accounting system as presented in this study may effectively enable farmers to address the issue of emissions of GHGs in their operational management decisions. Both approaches serve their own specific objectives: full accounting at the farm level to explore mitigation options, and the IPCC methods to report changes in GHG emissions at the national level.     

LIFE BEEF CARBON: a common framework for quantifying grass and corn based beef farms’ carbon footprints

Europe’s roadmap to a low-carbon economy aims to cut greenhouse gas (GHG) emissions 80% below 1990 levels by 2050. Beef production is an important source of GHG emissions and is expected to increase as the world population grows. LIFE BEEF CARBON is a voluntary European initiative that aims to reduce GHG emissions per unit of beef (carbon footprint) by 15% over a 10-year period on 2172 farms in four large beef-producing countries. Changes in farms beef carbon footprint are normally estimated via simulation modelling, but the methods current models apply differ. Thus, our initial goal was to develop a common modelling framework to estimate beef farms carbon footprint. The framework was developed for a diverse set of Western Europe farms located in Ireland, Spain, Italy and France. Whole farm and life cycle assessment (LCA) models were selected to quantify emissions for the different production contexts and harmonized. Carbon Audit was chosen for Ireland, Bovid-CO₂ for Spain and CAP’2ER for France and Italy. All models were tested using 20 case study farms, that is, 5 per country and quantified GHG emissions associated with on-farm live weight gain. The comparison showed the ranking of beef systems gross carbon footprint was consistent across the three models. Suckler to weaning or store systems generally had the highest carbon footprint followed by suckler to beef systems and fattening beef systems. When applied to the same farm, Carbon Audit’s footprint estimates were slightly lower than CAP’2ER, but marginally higher than Bovid-CO₂. These differences occurred because the models were adapted to a specific region’s production circumstances, which meant their emission factors for key sources; that is, methane from enteric fermentation and GHG emissions from concentrates were less accurate when used outside their target region. Thus, for the common modelling framework, region-specific LCA models were chosen to estimate beef carbon footprints instead of a single generic model. Additionally, the Carbon Audit and Bovid-CO₂ models were updated to include carbon removal by soil and other environmental metrics included in CAP’2ER, for example, acidification. This allows all models to assess the effect carbon mitigation strategies have on other potential pollutants. Several options were identified to reduce beef farms carbon footprint, for example, improving genetic merit. These options were assessed for beef systems, and a mitigation plan was created by each nation. The cumulative mitigation effect of the LIFE BEEF CARBON plan was estimated to exceed the projects reduction target (−15%).     

Biogenic Carbon and Temporary Storage Addressed with Dynamic Life Cycle Assessment

A growing tendency in policy making and carbon footprint estimation gives value to temporary carbon storage in biomass products or to delayed greenhouse gas (GHG) emissions. Some life cycle‐based methods, such as the British publicly available specification (PAS) 2050 or the recently published European Commission's International Reference Life Cycle Data System (ILCD) Handbook, address this issue. This article shows the importance of consistent consideration of biogenic carbon and timing of GHG emissions in life cycle assessment (LCA) and carbon footprint analysis. We use a fictitious case study assessing the life cycle of a wooden chair for four end‐of‐life scenarios to compare different approaches: traditional LCA with and without consideration of biogenic carbon, the PAS 2050 and ILCD Handbook methods, and a dynamic LCA approach. Reliable results require accounting for the timing of every GHG emission, including biogenic carbon flows, as soon as a benefit is given for temporarily storing carbon or delaying GHG emissions. The conclusions of a comparative LCA can change depending on the time horizon chosen for the analysis. The dynamic LCA approach allows for a consistent assessment of the impact, through time, of all GHG emissions (positive) and sequestration (negative). The dynamic LCA is also a valuable approach for decision makers who have to understand the sensitivity of the conclusions to the chosen time horizon.     

The Concept of City Carbon Maps: A Case Study of Melbourne,Australia

Cities are thought to be associated with most of humanity's consumption of natural resources and impacts on the environment. Cities not only constitute major centers of economic activity, knowledge, innovation, and governance—they are also said to be linked to approximately 70% to 80% of global carbon dioxide emissions. This makes cities primary agents of change in a resource‐ and carbon‐constraint world. In order to set meaningful targets, design successful policies, and implement effective mitigation strategies, it is important that greenhouse gas (GHG) emissions accounting for cities is accurate, comparable, comprehensive, and complete. Despite recent developments in the standardization of city GHG accounting, there is still a lack of consistent guidelines regarding out‐of‐boundary emissions, thus hampering efforts to identify mitigation priorities and responsibilities. We introduce a new conceptual framework—based on environmental input‐output analysis—that allows for a consistent and complete reconciliation of direct and indirect GHG emissions from a city. The “city carbon map” shows local, regional, national, and global origins and destinations of flows of embodied emissions. We test the carbon map concept by applying it to the greater metropolitan area of Melbourne, Australia. We discuss the results and limitations of the approach in the light of possible mitigation strategies and policies by different urban stakeholders.     

Life Cycle Assessment of Greenhouse Gas Emissions from Marine Fuels: A Case Study of Saudi Crude Oil versus Natural Gas in Different Global Regions

The understanding of the greenhouse gas (GHG) emissions dimension in discussing the future of marine fuels makes it important to advance the current life cycle assessment (LCA) practice in this context. Previous LCA studies of marine fuels rely on general LCA models such as GREET and JEC well‐to‐wheels study. These models do not fully capture the various methane losses in the fuel supply chain. The primary goal of this LCA study is to compare the GHG emissions of heavy fuel oil and marine gas oil produced from Saudi crude oil to liquefied natural gas (LNG) in different global regions. A sensitivity analysis was performed to show how results may vary with non‐Saudi crudes. A secondary goal was to advance LCA of marine fuels by utilizing, for the first time, a set of bottom‐up engineering models that enable detailed analysis of specific oil and gas projects worldwide. The results show particular cases where LNG use in marine applications has a significant countereffect in terms of climate change compared to conventional marine fuels produced from a low‐carbon‐intensity crude oil. When the results are calculated based on a 20‐ versus 100‐year methane global warming potential, LNG appears noncompetitive for climate impact in marine applications.     

Contribution of Urban Water Supply to Greenhouse Gas Emissions in China

Greenhouse gas (GHG) emissions from energy use in the water sector in China have not received the same attention as emissions from other sectors, but interest in this area is growing. This study uses 2011 data to investigate GHG emissions from electricity use for urban water supply in China. The objective is to measure the climate cobenefit of water conservation, compare China with other areas on a number of emissions indicators, and assist in development of policy that promotes low‐emission water supply. Per capita and per unit GHG emissions for water supplied to urban areas in China in 2011 were 24.5 kilograms carbon dioxide equivalent (kg CO₂‐eq) per capita per year and 0.213 kg CO₂‐eq per cubic meter, respectively. Comparison of provinces within China revealed that GHG emissions for urban water supply as a percentage of total province‐wide emissions from electricity use correlate directly with the rate of leakage and water loss within the water distribution system. This highlights controlling leakage as a possible means of reducing the contribution of urban water supply to GHG emissions. An inverse correlation was established between GHG emissions per unit water and average per capita daily water use, which implies that water demand tends to be higher when per unit emissions are lower. China's high emission factor for electricity generation inflates emissions for urban water supply. Shifting from emissions‐intensive electricity sources is crucial to reducing emissions in the water supply sector.     

Implementing a Dynamic Life Cycle Assessment Methodology with a Case Study on Domestic Hot Water Production

This work contributes to the development of a dynamic life cycle assessment (DLCA) methodology by providing a methodological framework to link a dynamic system modeling method with a time‐dependent impact assessment method. This three‐step methodology starts by modeling systems where flows are described by temporal distributions. Then, a temporally differentiated life cycle inventory (TDLCI) is calculated to present the environmental exchanges through time. Finally, time‐dependent characterization factors are applied to the TDLCI to evaluate climate‐change impacts through time. The implementation of this new framework is illustrated by comparing systems producing domestic hot water (DHW) over an 80‐year period. Electricity is used to heat water in the first system, whereas the second system uses a combination of solar energy and gas to heat an equivalent amount of DHW at the same temperature. This comparison shows that using a different temporal precision (i.e., monthly vs. annual) to describe process flows can reverse conclusions regarding which case has the best environmental performance. Results also show that considering the timing of greenhouse gas (GHG) emissions reduces the absolute values of carbon footprint in the short‐term when compared with results from the static life cycle assessment. This pragmatic framework for the implementation of time in DLCA studies is proposed to help in the development of the methodology. It is not yet a fully operational scheme, and efforts are still required before DLCA can become state of practice.     

草原畜牧业温室气体排放现状、问题及展望

草原畜牧业生产系统是一个涉及环境、经济、社会多层面、且系统内部气候-土壤-草地-家畜-管理之间相互作用的复杂的社会生态系统。草原不仅为人类提供所需要的肉奶,也提供了多种生态系统服务。然而,草原畜牧业也是主要的温室气体排放源之一。减缓畜牧业温室气体排放的研究已成为当前气候变化科学研究关注的焦点。综述了国内外草原畜牧业温室气体排放研究现状,指出现有研究的不足主要集中在以下3个方面：（1）虽然生命周期评价方法广泛应用于草原畜牧业温室气体排放研究,但是存在诸多问题,导致目前的研究框架体系尚不完善,特别体现在以下几方面：是否考虑外部输入、是否考虑土壤有机碳、畜牧业温室气体排放强度指标的选择等;（2）缺乏单一环节减缓措施对草原畜牧业整体温室气体减排效果的研究;（3）目前对影响草原畜牧业温室气体排放强度的因素主要集中在生态系统层面的分析,忽略了社会系统的作用,无法反映社会系统与生态系统的相互反馈机制,导致机制阐释不完善。综上所述,未来仍需从以下三方面开展研究：（1）完善草原畜牧业研究框架体系及提升研究方法;（2）加强对单一环节减缓措施对草原畜牧业温室气体整体减排效果的综合评价;（3）基于社会生态系统的角度深入研究影响草原畜牧业温室气体排放强度差异的机制。一方面,这有助于深入理解草原畜牧业温室气体排放强度情况,也为低碳型草原畜牧业发展政策的制定提供思路借鉴;另一方面对于科学合理的可持续利用草场和恢复草地生态环境均具有重要意义。     

Balancing conservation and climate change – a methodology using existing data demonstrated for twelve UK priority habitats

Mitigation of climate change (CC) is a regulating ecosystem service provided by priority habitats that is often co-delivered alongside their conservation of biodiversity. Carefully planned conservation management is thought necessary to support biodiversity adaptation to CC, but could also contribute to CC mitigation. This paper presents a methodology for assessing direct emissions of greenhouse gases (GHG: CO₂, CH₄ and N₂O) from 12 UK priority habitats in 26 Special Areas of Conservation (SAC) using readily available data. Background emissions are estimated on the basis of published field research. The contribution of conservation management to GHG emission reduction is estimated using the IPCC GHG accounting methodology and other methods. Management Data Acquisition surveys carried out at selected SACs provided data on management practises for Scotland and Wales. Climate change mitigation actions identified in this study for priority habitats included livestock removal or change in stocking density, with GHG reduction potential of up to 3 tCO₂e/animal/year, afforestation of acid grasslands—up to 19.4 tCO₂e/ha/year, wetland restoration—0.3–0.8 tCO₂e/ha/year and cessation of moorland burning—6.9 tCO₂e/ha/year. Estimated GHG emissions from priority habitats can be used to identify win:win management options that co-deliver GHG mitigation, climate adaptation and conservation benefits for consideration by policy makers and conservation managers.     

Consensus,uncertainties and challenges for perennial bioenergy crops and land use

Perennial bioenergy crops have significant potential to reduce greenhouse gas (GHG) emissions and contribute to climate change mitigation by substituting for fossil fuels; yet delivering significant GHG savings will require substantial land‐use change, globally. Over the last decade, research has delivered improved understanding of the environmental benefits and risks of this transition to perennial bioenergy crops, addressing concerns that the impacts of land conversion to perennial bioenergy crops could result in increased rather than decreased GHG emissions. For policymakers to assess the most cost‐effective and sustainable options for deployment and climate change mitigation, synthesis of these studies is needed to support evidence‐based decision making. In 2015, a workshop was convened with researchers, policymakers and industry/business representatives from the UK, EU and internationally. Outcomes from global research on bioenergy land‐use change were compared to identify areas of consensus, key uncertainties, and research priorities. Here, we discuss the strength of evidence for and against six consensus statements summarising the effects of land‐use change to perennial bioenergy crops on the cycling of carbon, nitrogen and water, in the context of the whole life‐cycle of bioenergy production. Our analysis suggests that the direct impacts of dedicated perennial bioenergy crops on soil carbon and nitrous oxide are increasingly well understood and are often consistent with significant life cycle GHG mitigation from bioenergy relative to conventional energy sources. We conclude that the GHG balance of perennial bioenergy crop cultivation will often be favourable, with maximum GHG savings achieved where crops are grown on soils with low carbon stocks and conservative nutrient application, accruing additional environmental benefits such as improved water quality. The analysis reported here demonstrates there is a mature and increasingly comprehensive evidence base on the environmental benefits and risks of bioenergy cultivation which can support the development of a sustainable bioenergy industry.     

Approaches for inclusion of forest carbon cycle in life cycle assessment – a review

Forests are a significant pool of terrestrial carbon. A key feature related to forest biomass harvesting and use is the typical time difference between carbon release into and sequestration from the atmosphere. Traditionally, the use of sustainably grown biomass has been considered as carbon neutral in life cycle assessment (LCA) studies. However, various approaches to account for greenhouse gas (GHG) emissions and sinks of forest biomass acquisition and use have also been developed and applied, resulting in different conclusions on climate impacts of forest products. The aim of this study is to summarize, clarify, and assess the suitability of these approaches for LCA. A literature review is carried out, and the results are analyzed through an assessment framework. The different approaches are reviewed through their approach to the definition of reference land‐use situation, consideration of time frame and timing of carbon emissions and sequestration, substitution credits, and indicators applied to measure climate impacts. On the basis of the review, it is concluded that, to account for GHG emissions and the related climate impacts objectively, biomass carbon stored in the products and the timing of sinks and emissions should be taken into account in LCA. The reference situation for forest land use has to be defined appropriately, describing the development in the absence of the studied system. We suggest the use of some climate impact indicator that takes the timing of the emissions and sinks into consideration and enables the use of different time frames. If substitution credits are considered, they need to be transparently presented in the results. Instead of carbon stock values taken from the literature, the use of dynamic forest models is recommended.     

Implementing Carbon‐Footprint‐Based Calculation Tools in Municipal Greenhouse Gas Inventories

Policy makers and practitioners working on local climate action continuously strive for improved greenhouse gas (GHG) inventories to support their mitigation strategies. The provision of such inventories, with the sufficient detail and quality needed, has proven to be challenging. This article describes the application of a carbon‐footprint–based (CF‐based) calculation tool to Norwegian municipalities. The aim is to improve the local GHG inventory, with a particular focus on the emissions resulting from the provision of services by local governments. Through selective CF analysis, we aim to illustrate the knowledge gained from implementing these tools in local climate action plans and to further contrast CF‐based calculations with more traditional production‐based accounting. Municipalities report they have revised their understanding of the most important GHG mitigation strategies after implementing this tool.     

Which cropland greenhouse gas mitigation options give the greatest benefits in different world regions? Climate and soil‐specific predictions from integrated empirical models

Major sources of greenhouse gas (GHG) emissions from agricultural crop production are nitrous oxide (N₂O) emissions resulting from the application of mineral and organic fertilizer, and carbon dioxide (CO₂) emissions from soil carbon losses. Consequently, choice of fertilizer type, optimizing fertilizer application rates and timing, reducing microbial denitrification and improving soil carbon management are focus areas for mitigation. We have integrated separate models derived from global data on fertilizer‐induced soil N₂O emissions, soil nitrification inhibitors, and the effects of tillage and soil inputs of soil C stocks into a single model to determine optimal mitigation options as a function of soil type, climate, and fertilization rates. After Monte Carlo sampling of input variables, we aggregated the outputs according to climate, soil and fertilizer factors to consider the benefits of several possible emissions mitigation strategies, and identified the most beneficial option for each factor class on a per‐hectare basis. The optimal mitigation for each soil‐climate‐region was then mapped to propose geographically specific optimal GHG mitigation strategies for crops with varying N requirements. The use of empirical models reduces the requirements for validation (as they are calibrated on globally or continentally observed phenomena). However, as they are relatively simple in structure, they may not be applicable for accurate site‐specific prediction of GHG emissions. The value of this modelling approach is for initial screening and ranking of potential agricultural mitigation options and to explore the potential impact of regional agricultural GHG abatement policies. Given the clear association between management practice and crop productivity, it is essential to incorporate characterization of the yield effect on a given crop before recommending any mitigation practice.     

Life Cycle Greenhouse Gas Emissions Reduction From Rigid Thermal Insulation Use in Buildings

Thermal insulation is a strategic product for reducing energy consumption and related greenhouse gas (GHG) emissions from the building sector. This study examines from a life cycle perspective the changes in GHG emissions resulting from the use of two rigid thermal insulation products manufactured and installed from 1971 to 2025. GHG emissions related to insulation production and fugitive releases of blowing agents are modeled and compared with GHG savings from reduced heating loads in North America, Europe, and Asia. Implementation of alternative blowing agents has greatly improved the carbon dioxide 100‐year equivalent (CO₂‐eq) emission performance of thermal insulation. The net average CO₂‐eq savings to emissions ratio for current extruded polystyrene (XPS) and polyisocyanurate (PIR) insulation studied was 48:1, with a broad range from 3 to 1,800. Older insulation products manufactured with chlorofluorocarbons (CFCs) can result in net cumulative GHG emissions. Reduction of CO₂‐eq emissions from buildings is governed by complex interactions between insulation thickness and placement, climate, fuel type, and heating system efficiencies. A series of charts mapping both emissions payback and net savings demonstrate the interactions between these factors and provide a basis for specific policy recommendations to guide effective insulation investments and placement.     

Including albedo in time‐dependent LCA of bioenergy

Albedo change during feedstock production can substantially alter the life cycle climate impact of bioenergy. Life cycle assessment (LCA) studies have compared the effects of albedo and greenhouse gases (GHGs) based on global warming potential (GWP). However, using GWP leads to unequal weighting of climate forcers that act on different timescales. In this study, albedo was included in the time‐dependent LCA, which accounts for the timing of emissions and their impacts. We employed field‐measured albedo and life cycle emissions data along with time‐dependent models of radiative transfer, biogenic carbon fluxes and nitrous oxide emissions from soil. Climate impacts were expressed as global mean surface temperature change over time (?T) and as GWP. The bioenergy system analysed was heat and power production from short‐rotation willow grown on former fallow land in Sweden. We found a net cooling effect in terms of ?T per hectare (?3.8 × 10^–11 K in year 100) and GWP₁₀₀ per MJ fuel (?12.2 g CO₂e), as a result of soil carbon sequestration via high inputs of carbon from willow roots and litter. Albedo was higher under willow than fallow, contributing to the cooling effect and accounting for 34% of GWP₁₀₀, 36% of ?T in year 50 and 6% of ?T in year 100. Albedo dominated the short‐term temperature response (10–20 years) but became, in relative terms, less important over time, owing to accumulation of soil carbon under sustained production and the longer perturbation lifetime of GHGs. The timing of impacts was explicit with ?T, which improves the relevance of LCA results to climate targets. Our method can be used to quantify the first‐order radiative effect of albedo change on the global climate and relate it to the climate impact of GHG emissions in LCA of bioenergy, alternative energy sources or land uses.     

Evaluation of a Regional Approach to Standards for Plug‐in Battery Electric Vehicles in Future Light‐Duty Vehicle Greenhouse Gas Regulations

Representing the greenhouse gas (GHG) emissions attributable to plug‐in electric vehicles (PEV) in vehicle GHG emissions regulations is complex because of spatial and temporal variation in fueling sources and vehicle use. Previous work has shown that the environmental performance of PEVs significantly varies depending on the characteristics of the electricity grid and how the vehicle is driven. This article evaluates the U.S. Environmental Protection Agency's (EPA's) GHG emissions accounting methodology in current and future standards for new electrified vehicles. The current approach employed by the EPA in their 2017–2025 model year light‐duty vehicle GHG regulation is compared with an accounting mechanism where the actual regional sales of PEVs, and the regional electricity emission factor in the year sold, are used to determine vehicle compliance value. Changes to the electricity grid over time and regional vehicle sales are included in the modeling efforts. A projection of a future GHG regulation past the 2017–2025 rule is used to observe the effect of such a regional regulation. The results showed that the complexity involved in tracking and accounting for regional PEV sales will not dramatically increase the effectiveness of the regulations to capture PEV electricity‐related GHG emissions in the absence of a major policy shift. A discussion of the feasibility and effectiveness of a regional standard for PEVs, and notable examples of region‐specific regulations instated in past energy policies, is also addressed.     

能源活动CO2排放不同核算方法比较和减排策略选择

能源活动CO₂排放是温室气体排放的最重要部分,这部分CO₂排放量的核算是温室气体清单编制和减排方案制定的关键和基础。采用直接法、电热终端法和隐含终端法核算了2009年中国能源消费的CO₂排放量,对不同核算法的CO₂排放部门分布、部门排放强度进行了比较,明确不同核算方法的差异和适用范围。采用电热终端法的核算结果定量分析了各产业部门和工业行业的经济增长和排放强度变化对中国能源活动CO₂排放增长的影响。结果表明,中国2009年隐含终端CO₂排放量为65.6亿t,略高于直接和电热终端CO₂排放量62.2亿t。3种核算方法的CO₂排放部门分布和排放强度有明显的差异:电、热力生产与供应业的直接排放占比为45.2%,而电热终端CO₂排放仅占4.5%;制造业的直接法、电热终端法和隐含终端法核算的CO₂排放占比分别为35.3% 、61.1%和65.5%,是终端能源消费CO₂排放最主要的部门;制造业、电热力生产与供应业和交通运输业的电热终端CO₂排放强度分别为2.166、1.72和1.622 t CO₂/万元GDP,是排放强度较高的部门。在产业部门中,制造业的色金属冶炼及压延加工业、非金属矿物制品业等5个行业以9.8%的经济增长贡献,排放了52.4%的CO₂,是产业结构调整、技术和工程减排的重点;服务业以7.2%的CO₂排放,贡献了38.4%的经济增长,应作为中国低碳经济优先发展的产业。     

Economic and ecological views on climate change mitigation with bioenergy and negative emissions

Climate stabilization scenarios emphasize the importance of land‐based mitigation to achieve ambitious mitigation goals. The stabilization scenarios informing the recent IPCC's Fifth Assessment Report suggest that bioenergy could contribute anywhere between 10 and 245 EJ to climate change mitigation in 2100. High deployment of bioenergy with low life cycle GHG emissions would enable ambitious climate stabilization futures and reduce demands on other sectors and options. Bioenergy with carbon capture and storage (BECCS) would even enable so‐called negative emissions, possibly in the order of magnitude of 50% of today's annual gross emissions. Here, I discuss key assumptions that differ between economic and ecological perspectives. I find that high future yield assumptions, plausible in stabilization scenarios, look less realistic when evaluated in biophysical metrics. Yield assumptions also determine the magnitude of counterfactual land carbon stock development and partially determine the potential of BECCS. High fertilizer input required for high yields would likely hasten ecosystem degradation. I conclude that land‐based mitigation strategies remain highly speculative; a constant iteration between synoptic integrated assessment models and more particularistic and fine‐grained approaches is a crucial precondition for capturing complex dynamics and biophysical constraints that are essential for comprehensive assessments.     

Decoupling of greenhouse gas emissions from global agricultural production: 1970–2050

Since 1970 global agricultural production has more than doubled; contributing ~1/4 of total anthropogenic greenhouse gas (GHG) burden in 2010. Food production must increase to feed our growing demands, but to address climate change, GHG emissions must decrease. Using an identity approach, we estimate and analyse past trends in GHG emission intensities from global agricultural production and land‐use change and project potential future emissions. The novel Kaya–Porter identity framework deconstructs the entity of emissions from a mix of multiple sources of GHGs into attributable elements allowing not only a combined analysis of the total level of all emissions jointly with emissions per unit area and emissions per unit product. It also allows us to examine how a change in emissions from a given source contributes to the change in total emissions over time. We show that agricultural production and GHGs have been steadily decoupled over recent decades. Emissions peaked in 1991 at ~12 Pg CO₂‐eq. yr^?1 and have not exceeded this since. Since 1970 GHG emissions per unit product have declined by 39% and 44% for crop‐ and livestock‐production, respectively. Except for the energy‐use component of farming, emissions from all sources have increased less than agricultural production. Our projected business‐as‐usual range suggests that emissions may be further decoupled by 20–55% giving absolute agricultural emissions of 8.2–14.5 Pg CO₂‐eq. yr^?1 by 2050, significantly lower than many previous estimates that do not allow for decoupling. Beyond this, several additional costcompetitive mitigation measures could reduce emissions further. However, agricultural GHG emissions can only be reduced to a certain level and a simultaneous focus on other parts of the food‐system is necessary to increase food security whilst reducing emissions. The identity approach presented here could be used as a methodological framework for more holistic food systems analysis.