Discovery of substrate for type I signal peptidase SpsB from Staphylococcus aureus.

Based on the kinetic model of substrate phage proteolysis, we have formulated a strategy for best manipulating the conditions in screening phage display libraries for protease substrates (Sharkov, N. A., Davis, R. M., Reidhaar-Olson, J. F., Navre, M., and Cai, D. (2001) J. Biol. Chem. 276, 10788-10793). This strategy is exploited in the present study with signal peptidase SpsB from Staphylococcus aureus. We demonstrate that highly active substrate phage clones can be isolated from a phage display library by systematically tuning the selection stringency in screening. Several of the selected clones exhibit superior reactivity over a control, the best clone, SIIIRIII-8, showing >100-fold improvement. Because no conserved sequence features were readily revealed that could allow delineation of the active and unreactive clones, the sequences identified in five of the active clones were tested as synthetic dodecamers, Ac-AGX(8)GA-NH(2). Using electrospray ionization mass spectrometry, we show that four of these peptides can be cleaved by SpsB and that Ala is the P1 residue exclusively and Ala or Leu the P3 residue, in keeping with the (-3, -1) rule for substrate recognition by signal peptidase. Our successful screening with SpsB demonstrated the general applicability of the screening strategy and allowed us to isolate the first peptide substrates for the enzyme.     

Type I signal peptidase and protein secretion in Staphylococcus aureus

Staphylococcus aureus is an important human pathogen whose virulence relies on the secretion of many different proteins. In general, the secretion of most proteins in S. aureus, as well as other bacteria, is dependent on the type I signal peptidase (SPase)-mediated cleavage of the N-terminal signal peptide that targets a protein to the general secretory pathway. The arylomycins are a class of natural product antibiotics that inhibit SPase, suggesting that they may be useful chemical biology tools for characterizing the secretome. While wild-type S. aureus (NCTC 8325) is naturally resistant to the arylomycins, sensitivity is conferred via a point mutation in its SPase. Here, we use a synthetic arylomycin along with a sensitized strain of S. aureus and multidimensional protein identification technology (MudPIT) mass spectrometry to identify 46 proteins whose extracellular accumulation requires SPase activity. Forty-four possess identifiable Sec-type signal peptides and thus are likely canonically secreted proteins, while four also appear to possess cell wall retention signals. We also identified the soluble C-terminal domains of two transmembrane proteins, lipoteichoic acid synthase, LtaS, and O-acyteltransferase, OatA, both of which appear to have noncanonical, internal SPase cleavage sites. Lastly, we identified three proteins, HtrA, PrsA, and SAOUHSC_01761, whose secretion is induced by arylomycin treatment. In addition to elucidating fundamental aspects of the physiology and pathology of S. aureus, the data suggest that an arylomycin-based therapeutic would reduce virulence while simultaneously eradicating an infection.     

Molecular cloning and expression of the spsB gene encoding an essential type I signal peptidase from Staphylococcus aureus.

The gene, spsB, encoding a type I signal peptidase has been cloned from the gram-positive eubacterium Staphylococcus aureus. The gene encodes a protein of 191 amino acid residues with a calculated molecular mass of 21,692 Da. Comparison of the protein sequence with those of known type I signal peptidases indicates conservation of amino acid residues known to be important or essential for catalytic activity. The enzyme has been expressed to high levels in Escherichia coli and has been demonstrated to possess enzymatic activity against E. coli preproteins in vivo. Experiments whereby the spsB gene was transferred to a plasmid that is temperature sensitive for replication indicate that spsB is an essential gene. We identified an open reading frame immediately upstream of the spsB gene which encodes a type I signal peptidase homolog of 174 amino acid residues with a calculated molecular mass of 20,146 Da that is predicted to be devoid of catalytic activity.     

Characterization of RAP,a quorum sensing activator of Staphylococcus aureus

Staphylococcus aureus are Gram-positive bacteria and cause diverse serious diseases in humans and animals through the production of toxins. The production of toxins is regulated by quorum sensing mechanisms, where proteins such as RNAIII activating protein (RAP) are secreted by the bacteria and induce virulence. Antibodies to RAP have been shown to protect mice from infection, but the molecular structure of RAP was not known and hindered vaccine development. To characterize RAP, recombinant protein was made and tested for its ability to induce genes important for pathogenesis (agr). In addition, monoclonal antibodies were produced to identify its cellular localization. Results shown here indicate that RAP is a 277-aa protein that is an ortholog of the ribosomal protein L2. Like the native molecule, recombinant RAP activates the production of RNAIII (encoded by agr). Using RAP specific monoclonal antibodies we demonstrate that RAP is continuously secreted and while RAP is expressed also in other bacteria (like Staphylococcus epidermidis, Staphylococcus xylosus and Escherichia coli), it is secreted to the culture medium only by S. aureus. Our results show that the ribosomal protein L2 has an extraribosomal function and that when secreted RAP acts as an autoinducer of virulence to regulate S. aureus pathogenesis.     

Type I signal peptidase and protein secretion in Staphylococcus epidermidis

Bacterial protein secretion is a highly orchestrated process that is essential for infection and virulence. Despite extensive efforts to predict or experimentally detect proteins that are secreted, the characterization of the bacterial secretome has remained challenging. A central event in protein secretion is the type I signal peptidase (SPase)-mediated cleavage of the N-terminal signal peptide that targets a protein for secretion via the general secretory pathway, and the arylomycins are a class of natural products that inhibit SPase, suggesting that they may be useful chemical biology tools for characterizing the secretome. Here, using an arylomycin derivative, along with two-dimensional gel electrophoresis and liquid chromatography-tandem mass spectrometry (LC-MS/MS), we identify 11 proteins whose secretion from stationary-phase Staphylococcus epidermidis is dependent on SPase activity, 9 of which are predicted to be translated with canonical N-terminal signal peptides. In addition, we find that the presence of extracellular domains of lipoteichoic acid synthase (LtaS) and the β-lactam response sensor BlaR1 in the medium is dependent on SPase activity, suggesting that they are cleaved at noncanonical sites within the protein. In all, the data define the proteins whose stationary-phase secretion depends on SPase and also suggest that the arylomycins should be valuable chemical biology tools for the study of protein secretion in a wide variety of different bacteria.     

Analysis of type I signal peptidase affinity and specificity for preprotein substrates

Type I signal peptidases (SPases) are membrane-bound endopeptidases responsible for the catalytic cleavage of signal peptides from secretory proteins. Here, we analysed the interaction between a bacterial type I SPase and preprotein substrates using surface plasmon resonance. The use of a home-made biosensor surface based on a mixed self-assembled monolayer of thiols on gold allowed qualitative and kinetic analysis. In vitro binding of purified preproteins to a covalently immobilised bacterial SPase was found to be rather efficient (apparent K(D)=10(-7)-10(-8)M). The signal peptide was shown to be a prerequisite for SPase binding and the nature of the mature part of the preprotein significantly affected SPase binding affinity. The developed biosensor containing immobilised SPase is of great importance for analysis of specificity at substrate binding level and for drug screening. In fact, this is the first report of a membrane protein that was covalently attached to a biosensor surface and that retained binding capacity.     

Substrate based peptide aldehyde inhibits bacterial type I signal peptidase

Bacterial type I signal peptidase is a potential target for the development of novel antibacterial agents. In this study we demonstrate that a substrate based peptide aldehyde inhibits signal peptidases with a lower IC₅₀ value than the lipopeptides described to date. The length of the core lipopeptide could be reduced by removing several amino acids from both termini. Conversion of this peptide to an aldehyde resulted in a molecule with an IC₅₀ value of 0.09 μM when tested against Saccharomyces aureus SPase I, SpsB.     

Not just an antibiotic target: Exploring the role of type I signal peptidase in bacterial virulence

The looming antibiotic crisis has prompted the development of new strategies towards fighting infection. Traditional antibiotics target bacterial processes essential for viability, whereas proposed antivirulence approaches rely on the inhibition of factors that are required only for the initiation and propagation of infection within a host. Although antivirulence compounds have yet to prove their efficacy in the clinic, bacterial signal peptidase I (SPase) represents an attractive target in that SPase inhibitors exhibit broad-spectrum antibiotic activity, but even at sub-MIC doses also impair the secretion of essential virulence factors. The potential consequences of SPase inhibition on bacterial virulence have not been thoroughly examined, and are explored within this review. In addition, we review growing evidence that SPase has relevant biological functions outside of mediating secretion, and discuss how the inhibition of these functions may be clinically significant.     

Plastidic type I signal peptidase 1 is a redox‐dependent thylakoidal processing peptidase

Thylakoids are the photosynthetic membranes in chloroplasts and cyanobacteria. The aqueous phase inside the thylakoid known as the thylakoid lumen plays an essential role in the photosynthetic electron transport. The presence and significance of thiol‐disulfide exchange in this compartment have been recognized but remain poorly understood. All proteins found free in the thylakoid lumen and some proteins associated to the thylakoid membrane require an N‐terminal targeting signal, which is removed in the lumen by a membrane‐bound serine protease called thylakoidal processing peptidase (TPP). TPP is homologous to Escherichia coli type I signal peptidase (SPI) called LepB. Genetic data indicate that plastidic SPI 1 (Plsp1) is the main TPP in Arabidopsis thaliana (Arabidopsis) although biochemical evidence had been lacking. Here we demonstrate catalytic activity of bacterially produced Arabidopsis Plsp1. Recombinant Plsp1 showed processing activity against various TPP substrates at a level comparable to that of LepB. Plsp1 and LepB were also similar in the pH optima, sensitivity to arylomycin variants and a preference for the residue at ?3 to the cleavage site within a substrate. Plsp1 orthologs found in angiosperms contain two unique Cys residues located in the lumen. Results of processing assays suggested that these residues were redox active and formation of a disulfide bond between them was necessary for the activity of recombinant Arabidopsis Plsp1. Furthermore, Plsp1 in Arabidopsis and pea thylakoids migrated faster under non‐reducing conditions than under reducing conditions on SDS‐PAGE. These results underpin the notion that Plsp1 is a redox‐dependent signal peptidase in the thylakoid lumen.     

Information processing and signal integration in bacterial quorum sensing

Bacteria communicate using secreted chemical signaling molecules called autoinducers in a process known as quorum sensing. The quorum‐sensing network of the marine bacterium Vibrio harveyi uses three autoinducers, each known to encode distinct ecological information. Yet how cells integrate and interpret the information contained within these three autoinducer signals remains a mystery. Here, we develop a new framework for analyzing signal integration on the basis of information theory and use it to analyze quorum sensing in V. harveyi. We quantify how much the cells can learn about individual autoinducers and explain the experimentally observed input–output relation of the V. harveyi quorum‐sensing circuit. Our results suggest that the need to limit interference between input signals places strong constraints on the architecture of bacterial signal‐integration networks, and that bacteria probably have evolved active strategies for minimizing this interference. Here, we analyze two such strategies: manipulation of autoinducer production and feedback on receptor number ratios.     

Bacitracin sensing and resistance in Staphylococcus aureus

Bacterial two-component systems (TCSs) have been demonstrated to be associated with not only the expression of virulence factors, but also the susceptibility to antibacterial agents. In Staphylococcus aureus, 16 types of TCSs have been identified. We previously found that the inactivation of one uncharacterized TCS (designated as BceRS, MW gene ID: MW2545-2544) resulted in an increase in susceptibility to bacitracin. In this study, we focused on this TCS and tried to identify the TCS-controlled factors affecting the susceptibility to bacitracin. We found that two ABC transporters were associated with the susceptibility to bacitracin. One transporter designated as BceAB (MW2543-2542) is downstream of this TCS, while another (formerly designated as VraDE: MW2620-2621) is separate from this TCS. Both transporters showed homology with several bacitracin-resistance factors in Gram-positive bacteria. Inactivation of each of these two transporters increased the susceptibility to bacitracin. Expressions of these transporters were significantly increased by the addition of bacitracin, while this induction was not observed in the TCS-inactivated mutant. These results indicate that this TCS senses bacitracin, and also positively regulates the expression of two ABC transporters.     

The role of small RNAs in quorum sensing

Quorum sensing is a form of cell-cell signaling in bacteria that provides information regarding population density, species composition, and environmental and metabolic signals. It enables community-wide coordination of gene expression, and presumably benefits group behaviors. Multiple regulatory small RNAs (sRNAs) act centrally in quorum sensing, integrating signals with other environmental stimuli, to produce an appropriate output.     

A role for TonB1 in biofilm formation and quorum sensing in Pseudomonas aeruginosa

This study revealed that a Pseudomonas aeruginosa tonB1 mutant was unable to produce a mature biofilm and showed reduced swarming and twitching motilities compared with the parent strain. The tonB1 mutant was also found to produce significantly lower cell-free and cell-associated levels of the quorum sensing (QS) signal molecule 3-oxo-C12-AHL. Altered biofilm and motility phenotypes were restored to wildtype with the addition of exogenous N-acylhomoserine lactones. These functions were independent of the role of TonB1 in iron uptake. This is the first time that a link has been established between TonB1 activity and QS.     

Detection of quorum sensing signal molecules in the family Vibrionaceae

Aims: The aim of this study was to detect the production of three kinds of quorum sensing (QS) signal molecules, i.e. the N‐acyl‐homoserine lactone (AHL), the autoinducer‐2 (AI‐2) and the cholerae autoinducer‐1‐like (CAI‐1‐like) molecules in 25 Vibrionaceae strains. Methods and Results: The QS signal molecules in 25 Vibrionaceae strains were detected with different biosensors. Except Salinivibrio costicola VIB288 and Vibrio natriegens VIB299, all the other 23 Vibrionaceae strains could produce one or more kinds of detectable QS signal molecules. Twenty‐one of the 25 strains were found to produce AHL signal molecules by using Vibrio harveyi JMH612 and Agrobacterium tumefaciens KYC55 (pJZ372; pJZ384; pJZ410) as biosensors. The AHL fingerprints of eight strains were detected by thin‐layer chromatography with Ag. tumefaciens KYC55, and two of them, i.e. V. mediterranei VIB296 and Aliivibrio logei VIB414 had a high diversity of AHLs. Twenty of the 25 strains were found to have the AI‐2 activity, and the luxS gene sequences in 18 strains were proved to be conserved by PCR amplification and sequencing. Only six (five Vibrio strains and A. logei VIB414) of the 25 strains possessed the CAI‐1‐like activity. A. logei VIB414, V. campbellii VIB285, V. furnissii VIB293, V. pomeroyi LMG20537 and two V. harveyi strains VIB571 and VIB645 were found to produce all the three kinds of QS signal molecules. Conclusions: The results indicated that the QS signal molecules, especially AHL and AI‐2 molecules, were widespread in the family Vibrionaceae. Significance and Impact of the Study: In response to a variety of environmental conditions and selection forces, the family Vibrionaceae produced QS signal molecules with great diversity and complexity. The knowledge we obtained from this study will be useful for further research on the roles of different QS signal molecules in this family.     

A multitask biosensor for micro-volumetric detection of N-3-oxo-dodecanoyl-homoserine lactone quorum sensing signal

N-3-oxo-dodecanoyl-homoserine lactone (3OC(12)-HSL) is the main quorum sensing (QS) signal produced by the human pathogen Pseudomonas aeruginosa, a major cause of hard-to-treat nosocomial infections and years-lasting chronic biofilm infections in the lungs of cystic fibrosis (CF) patients. 3OC(12)-HSL-dependent QS is considered a promising target for novel anti-pseudomonads drugs. However, the screening systems employed to date for the identification of QS inhibitors (QSI) were aimed at the identification of inhibitors of 3OC(12)-HSL signaling rather than of the synthesis or the export of this molecule. Moreover, the low concentration of 3OC(12)-HSL in CF sputum has hampered large scale studies aimed at addressing the role of this molecule in the CF lung infection. Here we describe the construction and characterization of PA14-R3, a new whole-cell biosensor for the quantitative detection of 3OC(12)-HSL. PA14-R3 provides fast and direct quantification of 3OC(12)-HSL over a wide range of concentrations (from pM to μM), and proved to be an easy-to-handle, cost-effective and reliable biosensor for high-throughput screening of 3OC(12)-HSL levels in samples of different origin, including CF sputum. Moreover, the specific features of PA14-R3 made it possible to develop and validate a novel high-throughput screening system for QSI based on the co-cultivation of PA14-R3 with the PA14 wild-type strain. With respect to previous screening systems for QSI, this approach has the advantage of being cost-effective and allowing the identification of compounds targeting, besides 3OC(12)-HSL signaling, any cellular process critical for QS response, including 3OC(12)-HSL synthesis and secretion.