A Physical Map of Arabidopsis thaliana Chromosome 3 Represented by Two Contigs of CIC YAC, P1, TAC and BAC Clones

We have constructed a physical map of Arabidopsis thaliana chromosome3 by ordering the clones from CIC YAC, P1, TAC and BAC librariesusing the sequences of a variety of genetic and EST markersand terminal sequences of clones. The markers used were 112DNA markers, 145 YAC end sequences, and 156 end sequences ofP1, TAC and BAC clones. The entire genome of chromosome 3, exceptfor the centromeric and telomeric regions, was covered by twolarge contigs, 13.6 Mb and 9.2 Mb long. This physical map willfacilitate map-based cloning experiments as well as genome sequencingof chromosome 3. The map and end sequence information are availableon the KAOS (Kazusa Arabidopsis data Opening Site) web siteat http://www.kazusa.or.jp/arabi/.     

A sequence-ready contig map of the top arm of Arabidopsis thaliana chromosome 3.

A fine physical map of the top arm of Arabidopsis thaliana chromosome 3 has been constructed by ordering P1, TAC and BAC clones using the sequences of a variety of DNA markers and end-sequences of clones. The marker sequences used in this study were derived from 58 DNA markers, 93 YAC end-sequences, and 807 end-sequences of P1, TAC and BAC clones. The entire top arm of chromosome 3, except for the centromeric and telomeric regions, was covered by a single contig 13.3 Mb long. This fine physical map will facilitate gene isolation by map-based cloning experiments as well as genome sequencing of the top arm of chromosome 3. The map and end-sequence information are available on the web site KAOS (Kazusa Arabidopsis data Opening Site) at [http://www.kazusa.or.jp/arabi/].     

Physical map-based sizes of the centromeric regions of Arabidopsis thaliana chromosomes 1, 2, and 3.

The sizes of the centromeric regions of Arabidopsis thaliana chromosomes 1, 2, and 3 were determined by construction of their physical maps on the basis of restriction analysis. As the reported centromeric regions contain large gaps in the middle due to highly repetitive sequences, appropriate probes for Southern hybridization were prepared from the sequences reported for the flanking regions and from the sequences of BAC and YAC clones newly isolated in this work, and restriction analysis was performed using DNA of a hypomethylated strain (ddm1). The sizes of the genetically defined centromeric regions were deduced to be 9 megabases (Mb), 4.2 Mb and 4.1 Mb, respectively (chromosome 1, from markers T22C23-t7 to T3P8-sp6; chromosome 2, from F5J15-sp6 to T15D9; chromosome 3, from T9G9-sp6 to T15M14; G. P. Copenhaver et al. Science, 286, 2468-2479, 1999). By combining the sizes of the centromeric regions previously estimated for chromosomes 4 and 5 and the sequence data reported for the A. thaliana genome, the total genome size of A. thaliana was estimated to be approximately 146.0 Mb.     

A 3-Mb Sequence-Ready Contig Map Encompassing the Multiple Disease Gene Cluster on Chromosome 11q13.1-q13.3

Despite the presence of several human disease genes on chromosome11q13, few of them have been molecularly cloned. Here, we reportthe construction of a contig map encompassing 11q13.1–q13.3using bacteriophage P1 (P1), bacterial artificial chromosome(BAC), and P1-derived artificial chromosome (PAC). The contigmap comprises 32 P1 clones, 27 BAC clones, 6 PAC clones, and1 YAC clone and spans a 3-Mb region from D11S480 to D11S913.The map encompasses all the candidate loci of Bardet-Biedlesyndrome type I (BBS1) and spinocerebellar ataxia type 5 (SCA5),one-third of the distal region for hereditary paraganglioma2 (PGL2), and one-third of the central region for insulin-dependentdiabetes mellitus 4 (IDDM4). In the process of map construction,61 new sequence-tagged site (STS) markers were developed fromthe Not I linking clones and the termini of clone inserts. Wehave also mapped 30 ESTs on this map. This contig map will facilitatethe isolation of polymorphic markers for a more re.ned analysisof the disease gene region and identi.cation of candidate genesby direct cDNA selection, as well as prediction of gene functionfrom sequence information of these bacterial clones.     

A Physical Map of the Short Arm of Wheat Chromosome 1A

Bread wheat (Triticum aestivum) has a large and highly repetitive genome which poses major technical challenges for its study. To aid map-based cloning and future genome sequencing projects, we constructed a BAC-based physical map of the short arm of wheat chromosome 1A (1AS). From the assembly of 25,918 high information content (HICF) fingerprints from a 1AS-specific BAC library, 715 physical contigs were produced that cover almost 99% of the estimated size of the chromosome arm. The 3,414 BAC clones constituting the minimum tiling path were end-sequenced. Using a gene microarray containing ∼40 K NCBI UniGene EST clusters, PCR marker screening and BAC end sequences, we arranged 160 physical contigs (97 Mb or 35.3% of the chromosome arm) in a virtual order based on synteny with Brachypodium, rice and sorghum. BAC end sequences and information from microarray hybridisation was used to anchor 3.8 Mbp of Illumina sequences from flow-sorted chromosome 1AS to BAC contigs. Comparison of genetic and synteny-based physical maps indicated that ∼50% of all genetic recombination is confined to 14% of the physical length of the chromosome arm in the distal region. The 1AS physical map provides a framework for future genetic mapping projects as well as the basis for complete sequencing of chromosome arm 1AS.     

The size and sequence organization of the centromeric region of Arabidopsis thaliana chromosome 4.

We have determined the genome structure of the centromeric region of Arabidopsis thaliana chromosome 4 by sequence analysis of BAC clones obtained by genome walking, followed by construction of a physical map using DNA of a hypomethylated strain. The total size of the centromeric region, corresponding to the recombinant inbred (RI) markers between mi87 and mi167, was approximately 5.3 megabases (Mb). This value is over 3 Mb longer than that previously estimated by the Arabidopsis Genome Initiative (Nature, 408, 796-815, 2000). Although we could not cover the entire centromeric region by BAC clones because of the presence of highly repetitive sequences in the middle (2.7 Mb), the cloned regions spanning approximately 1 Mb at both sides of the gap were newly sequenced. These results together with the reported sequences in the adjacent regions suggest that the centromeric region is principally composed of a central domain of 2.7 Mb, consisting of mainly 180-bp repeats and Athila elements, and upper and lower flanking regions of 1.55 Mb and 1 Mb, respectively. The flanking regions were predominantly composed of various types of transposable elements, except for the upper end moiety in which a large 5S rDNA array (0.65 Mb) and central domain-like sequence are present. Such an organization is essentially identical to the centromeric region of chromosome 5 reported previously.     

Analysis of the occurrence and nature of repeated DNA in an 850 kb region of Arabidopsis thaliana chromosome 4

The occurrence and nature of repeated DNA sequences has been analysed within an 850 kb YAC contig on Arabidopsis thaliana chromosome 4. Hybridization analysis with seven RFLP markers, six cosmid contigs, 29 YAC end probes and eight YAC clones showed that a least 585 kb of the 850 kb contained only low-copy sequences. One YAC end probe, EG15C8LE, hybridized to multiple genomic fragments and contained a sequence with predicted protein homology to cytochrome P450 monooxygenases. Another one, EG11B7RE, was found to be non-contiguous with the other YAC clones and contained a dispersed repetitive sequence associated with centromeric regions     

Construction of YAC Contigs on Rice Chromosome 5

A physical map of rice chromosome 5 was constructed with yeastartificial chromosome (YAC) clones along a high-resolution molecularlinkage map carrying 118 DNA markers distributed over 123.7cM of genomic DNA. YAC clones have been identified by colonyand Southern hybridization for 105 restriction fragment lengthpolymorphism (RFLP) markers and by polymerase chain reaction(PCR) screening for 8 sequence-tagged site (STS) markers and5 randomly amplified polymorphic DNA (RAPD) markers. Of 458YACs, 235 individual YACs with an average insert length of 350kb were selected and ordered on chromosome 5 from the YAC library.Forty-eight contigs covering nearly 21 Mb were formed on thechromosome 5; the longest one was 6 cM and covered 1.5 Mb. Thelength covered with YAC clones corresponded to 62% of the totallength of chromosome 5. There were many multicopy sequencesof expressed genes on chromosome 5. The distribution of manycopies of these expressed gene sequences was determined by YACSouthern hybridization and is discussed. A physical map withthese characteristics provides a powerful tool for elucidationof genome structure and extraction of useful genetic informationin rice.     

Physical Mapping of Rice Chromosomes 8 and 9 with YAC Clones

First efforts for physical mapping of rice chromosomes 8 and9 were carried out by ordering YAC clones of a rice genomicDNA library covering six genome equivalents with mapped DNAmarkers. A total of 79 and 74 markers from chromosomes 8 and9, respectively, were analyzed by YAC colony and Southern hybridizationusing RFLP markers of cDNA and genomic clones, and by polymerasechain reaction (PCR) screening using PCR-derived and sequence-taggedsite (STS) markers. As a result, 252 YAC clones were confirmedto contain the mapped DNA fragments on both chromosomes. A contigmap was constructed by ordering these YAC clones and about 53%and 43% genome coverage was obtained for chromosomes 8 and 9,respectively, assuming a YAC clone size of 350 kb and overlapbetween neighboring YACs of 50%. A continuous array of YAC cloneswith minimum overlap gave a total size of 18.9 Mb for chromosome8 and 15.6 Mb for chromosome 9, which are close to previousestimates. These contig maps may provide valuable informationthat can be useful in understanding chromosome structure andisolating specific genes by map-based cloning.     

Anchoring of rice BAC clones to the rice genetic map in silico

A wealth of molecular resources have been developed for rice genomics, including dense genetic maps, expressed sequence tags (ESTs), yeast artificial chromosome maps, bacterial artificial chromosome (BAC) libraries and BAC end sequence databases. Integration of genetic and physical maps involves labor-intensive empirical experiments. To accelerate the integration of the bacterial clone resources with the genetic map for the International Rice Genome Sequencing Project, we cleaned and filtered the available EST and BAC end sequences for repetitive sequences and then searched all available rice genetic markers with our filtered databases. We identified 418 genetic markers that aligned with at least one BAC end sequence with >95% sequence identity, providing a set of large insert clones with an average separation of 1 Mb that can serve as nucleation points for the sequencing phase of the International Rice Genome Sequencing Project.     

Structural analysis and complete physical map of Arabidopsis thaliana chromosome 5 including centromeric and telomeric regions.

Previously, we have reported a fine physical map of Arabidopsis thaliana chromosome 5, except for the centromeric and telomeric regions, by ordering clones from YAC, P1, TAC, and BAC libraries of the genome consisting of the two contigs of upper arm and lower arm, 11.6 M bases and 14.2 M bases, respectively. Here, the remaining centromeric and telomeric regions of chromosome 5 are completely characterized by the ordering of clones and PCR amplifications. Chromosome 5 of Arabidopsis thaliana ecotype Columbia is about 28.4 M bases long. The centromeric region is estimated at about 2 M bases long between two 5S-rDNA clusters. The 180-bp repeat region mainly consists of blocks of 180-bp tandem family and various type retroelements dispersed over a 500-kb region. The telomeric regions of chromosome 5 are characterized by PCR cloning, sequencing and hybridization. The telomere repeats at both ends are about 2.5-kb long and interestingly, telomere-associated repeats (approximately 700 bp) are found near both ends of chromosome 5.     

A human-horse comparative map based on equine BAC end sequences

In an effort to increase the density of sequence-based markers for the horse genome we generated 9473 BAC end sequences (BESs) from the CHORI-241 BAC library with an average read length of 677 bp. BLASTN searches with the BESs revealed 4036 meaningful hits (E 相似文献   

Towards map-based cloning of the barley stem rust resistance genes Rpg1 and rpg4 using rice as an intergenomic cloning vehicle

The barley stem rust resistance genes Rpg1 and rpg4 were mapped in barley on chromosomes 1P and 7M, respectively and the syntenous rice chromosomes identified as 6P and 3P by mapping common probes in barley and rice. Rice yeast artificial chromosome (YAC), bacterial artificial chromosome (BAC) and cosmid clones were used to isolate probes mapping to the barley Rpg1 region. The rice BAC isolated with the pM13 probe was a particularly excellent source of probes. A high-resolution map of the Rpg1 region was established with 1400 gametes yielding a map density of 3.6 markers per 0.1 cM. A detailed physical map was established for the rice BAC fragment containing the Rpg1-flanking markers pM13 and B24. This fragment covers a barley genetic distance of 0.6 cM and a rice DNA physical distance of ca. 70 kb. The distribution of barley cross-overs in relation to the rice DNA physical distances was extremely uneven. The barley genetic distance between the pM13 marker and Rpg1 was 0.1 cM per ca. 55 kb, while on the proximal side it was 0.5 cm per ca. 15 kb. Three probes from the distal end of the pM13 BAC mapped 3.0 cm proximal of Rpg1 and out of synteny with rice. These experiments confirm the validity of using large insert rice clones as probe sources to saturate small barley (and other large genome cereals) genome regions with markers. They also establish a note of caution that even in regions of high microsynteny, there may be small DNA fragments that have transposed and are no longer in syntenous positions.     

Functional features of a single chromosome arm in wheat (1AL) determined from its structure

Bread wheat (Triticum aestivum L.) is one of the most important crops globally and a high priority for genetic improvement, but its large and complex genome has been seen as intractable to whole genome sequencing. Isolation of individual wheat chromosome arms has facilitated large-scale sequence analyses. However, so far there is no such survey of sequences from the A genome of wheat. Greater understanding of an A chromosome could facilitate wheat improvement and future sequencing of the entire genome. We have constructed BAC library from the long arm of T. aestivum chromosome 1A (1AL) and obtained BAC end sequences from 7,470 clones encompassing the arm. We obtained 13,445 (89.99%) useful sequences with a cumulative length of 7.57 Mb, representing 1.43% of 1AL and about 0.14% of the entire A genome. The GC content of the sequences was 44.7%, and 90% of the chromosome was estimated to comprise repeat sequences, while just over 1% encoded expressed genes. From the sequence data, we identified a large number of sites suitable for development of molecular markers (362 SSR and 6,948 ISBP) which will have utility for mapping this chromosome and for marker assisted breeding. From 44 putative ISBP markers tested 23 (52.3%) were found to be useful. The BAC end sequence data also enabled the identification of genes and syntenic blocks specific to chromosome 1AL, suggesting regions of particular functional interest and targets for future research.     

The Korea brassica genome project: a glimpse of the brassica genome based on comparative genome analysis with Arabidopsis

A complete genome sequence provides unlimited information in the sequenced organism as well as in related taxa. According to the guidance of the Multinational Brassica Genome Project (MBGP), the Korea Brassica Genome Project (KBGP) is sequencing chromosome 1 (cytogenetically oriented chromosome #1) of Brassica rapa. We have selected 48 seed BACs on chromosome 1 using EST genetic markers and FISH analyses. Among them, 30 BAC clones have been sequenced and 18 are on the way. Comparative genome analyses of the EST sequences and sequenced BAC clones from Brassica chromosome 1 revealed their homeologous partner regions on the Arabidopsis genome and a syntenic comparative map between Brassica chromosome 1 and Arabidopsis chromosomes. In silico chromosome walking and clone validation have been successfully applied to extending sequence contigs based on the comparative map and BAC end sequences. In addition, we have defined the (peri)centromeric heterochromatin blocks with centromeric tandem repeats, rDNA and centromeric retrotransposons. In-depth sequence analyses of five homeologous BAC clones and an Arabidopsis chromosomal region reveal overall co-linearity, with 82% sequence similarity. The data indicate that the Brassica genome has undergone triplication and subsequent gene losses after the divergence of Arabidopsis and Brassica. Based on in-depth comparative genome analyses, we propose a comparative genomics approach for conquering the Brassica genome. In 2005 we intend to construct an integrated physical map, including sequence information from 500 BAC clones and integration of fingerprinting data and end sequence data of more than 100 000 BAC clones. The sequences have been submitted to GenBank with accession numbers: 10 204 BAC ends of the KBrH library (CW978640-CW988843); KBrH138P04, AC155338; KBrH117N09, AC155337; KBrH097M21, AC155348; KBrH093K03, AC155347; KBrH081N08, AC155346; KBrH080L24, AC155345; KBrH077A05, AC155343; KBrH020D15, AC155340; KBrH015H17, AC155339; KBrH001H24, AC155335; KBrH080A08, AC155344; KBrH004D11, AC155341; KBrH117M18, AC146875; KBrH052O08, AC155342.     

A fine physical map of the rice chromosome 5

A fine physical map of the rice (Oryza sativa spp. Japonica var. Nipponbare) chromosome 5 with bacterial artificial chromosome (BAC) and PI-derived artificial chromosome (PAC) clones was constructed through integration of 280 sequenced BAC/PAC clones and 232 sequence tagged site/expressed sequence tag markers with the use of fingerprinted contig data of the Nipponbare genome. This map consists of five contigs covering 99% of the estimated chromosome size (30.08 Mb). The four physical gaps were estimated at 30 and 20 kb for gaps 1–3 and gap 4, respectively. We have submitted 42.2-Mb sequences with 29.8 Mb of nonoverlapping sequences to public databases. BAC clones corresponding to telomere and centromere regions were confirmed by BAC-fluorescence in situ hybridization (FISH) on a pachytene chromosome. The genetically centromeric region at 54.6 cM was covered by a minimum tiling path spanning 2.1 Mb with no physical gaps. The precise position of the centromere was revealed by using three overlapping BAC/PACs for ~150 kb. In addition, FISH results revealed uneven chromatin condensation around the centromeric region at the pachytene stage. This map is of use for positional cloning and further characterization of the rice functional genomics. Electronic supplementary material Supplementary material is available in the online version of this article at and is accessible for authorized users. Chia-Hsiung Cheng and Mei-Chu Chung have equal contributions.     

Mapping of quantitative trait locus related to submergence tolerance in rice with aid of chromosome walking.

The major QTL for submergence tolerance was locate in the 5.9 cM interval between flanking RFLP markers. To narrow down this region, a physical map was constructed using YAC and BAC clones. A 400-kb YAC was identified in this region and later its end fragments were used to screen a rice BAC library. Through chromosome walking, 24 positive BAC clones formed two contigs around linked-RFLP markers, R1164 and RZ698. Using one YAC end, six BAC ends and three RFLP markers, a fine-scale map was constructed of the 6.8-cM interval of S10709-RZ698 on rice chromosome 9. The submergence tolerance and related trait were located in a small, well-defined region around BAC-end marker 180D1R and RFLP marker R1164. The physical-to-map distance ratio in this region is as small as 172.5 kb/cM, showing that this region is a hot spot for recombination in the rice genome.     

Fine physical mapping of the rice stripe resistance gene locus, Stvb-i

The Stvb-i gene confers stripe disease resistance to rice. For positional cloning, we constructed a physical map spanning 1.8-cM distance between flanking markers, consisting of 18 bacterial artificial chromosome (BAC) clones, around the Stvb-i locus on rice chromosome 11. The 18 clones were isolated by screening a BAC library derived from a japonica cultivar, Shimokita, with three Stvb-i-linked RFLP markers and DraI-digested DNAs of a yeast artificial chromosome (YAC) clone. The results of Southern hybridization and restriction enzyme analyses indicated that these BAC clones are contiguous and cover about a 700-kb region containing the Stvb-i allele. Utilizing end and internal fragments of the BAC insert DNAs, 33 molecular markers were generated within a small chromosomal region including the Stvb-i locus. Genotyping analysis with these markers for a resistant cultivar and four nearby recombinants selected from 120 F₂ individuals indicated that Stvb-i is contained within an approximately 286-kb region covered with two overlapping BAC clones. Received: 25 August 1999 / Accepted: 16 November 1999