Bimatoprost-Loaded Ocular Inserts as Sustained Release Drug Delivery Systems for Glaucoma Treatment: In Vitro and In Vivo Evaluation

The purpose of the present study was to develop and assess a novel sustained-release drug delivery system of Bimatoprost (BIM). Chitosan polymeric inserts were prepared using the solvent casting method and characterized by swelling studies, infrared spectroscopy, differential scanning calorimetry, drug content, scanning electron microscopy and in vitro drug release. Biodistribution of ^99mTc-BIM eye drops and ^99mTc-BIM-loaded inserts, after ocular administration in Wistar rats, was accessed by ex vivo radiation counting. The inserts were evaluated for their therapeutic efficacy in glaucomatous Wistar rats. Glaucoma was induced by weekly intracameral injection of hyaluronic acid. BIM-loaded inserts (equivalent to 9.0 µg BIM) were administered once into conjunctival sac, after ocular hypertension confirmation. BIM eye drop was topically instilled in a second group of glaucomatous rats for 15 days days, while placebo inserts were administered once in a third group. An untreated glaucomatous group was used as control. Intraocular pressure (IOP) was monitored for four consecutive weeks after treatment began. At the end of the experiment, retinal ganglion cells and optic nerve head cupping were evaluated in the histological eye sections. Characterization results revealed that the drug physically interacted, but did not chemically react with the polymeric matrix. Inserts sustainedly released BIM in vitro during 8 hours. Biodistribution studies showed that the amount of ^99mTc-BIM that remained in the eye was significantly lower after eye drop instillation than after chitosan insert implantation. BIM-loaded inserts lowered IOP for 4 weeks, after one application, while IOP values remained significantly high for the placebo and untreated groups. Eye drops were only effective during the daily treatment period. IOP results were reflected in RGC counting and optic nerve head cupping damage. BIM-loaded inserts provided sustained release of BIM and seem to be a promising system for glaucoma management.     

Effectiveness of latanoprost (Xalatan) monotherapy in newly discovered and previously medicamentously treated primary open angle glaucoma patients

We evaluated the effectiveness of latanoprost (Xalatan) monotherapy in primary open angle glaucoma (POAG). Latanoprost is a prostaglandin analogue, the pure 15(R) epimer of 13,14-dihydro-17-phenyl-18,19,20-trinor-PGF2alpha-isopropyl ester. As a prodrug it is being activated by enzymatic hydrolysis in the cornea after which it becomes active acid of latanoprost. Latanoprost is lowering the intraocular pressure (IOP) by increasing the uveoscleral outflow. In this study, latanoprost was used once daily as monotherapy what offers much better compliance for the patients than other combinations of drugs, preserving good IOP control. Based on the significant reduction of the IOP, measured on the day 60 of the trial (mean change in IOP was -5.1 mmHg, with 95% confidence interval in range from -5.6 to -4.5), it is concluded that use of latanoprost is advisable when calculating better IOP control, few side-effects and reductions in costs of potential surgical procedures.     

汉防己甲素滴眼液对高眼压模型大鼠的降眼压作用

目的比较观察汉防己甲素滴眼液与0.5%噻吗心安滴眼液对高眼压模型大鼠及正常大鼠降眼压的作用。方法正常SD大鼠共分4组：不同浓度的汉防己甲素滴眼液组（0.1%、0.2%、0.3%）及阳性对照组0.5%噻吗心安,药物滴右眼各一滴,阴性对照组生理盐水滴左眼、测量滴药前24h和滴药后1、3、6、24、48、72h的眼压。应用倍频532激光对SD大鼠右眼上巩膜静脉以及小梁网所在区域实施光凝术建立高眼压大鼠模型。高眼压模型鼠共分5组：不同浓度的汉防己甲素滴眼液0.05%、0.1%、0.2%、0.3%及阳性对照组0.5%噻吗心安,右眼即模型眼滴用药物,左眼作为空白对照。测量术前后的眼压。结果汉防己甲素滴眼液对大鼠正常眼压无降压作用（P〉0.05）。对高眼压大鼠用药后24h、72h、1周后,0.3%汉防己甲素滴眼液组降低眼压的幅度与0.5%噻吗心安滴眼液降低眼压的幅度相似（P〉0.05）;0.05%、0.1%、0.2%汉防己甲素滴眼液组也有明显的降压作用,但与0.5%噻吗心安滴眼液相比,降压幅度低于后者（P〈0.05）。结论0.05%、0.1%、0.2%、0.3%汉防己甲素滴眼液均有降低大鼠高眼压的作用,其中0.3%浓度的汉防己甲素滴眼液降眼压效果与0.5%的噻吗心安类似。汉防已甲素滴眼液作为一种治疗青光眼的药物有着良好应用前景。     

Development of Timolol-Loaded Galactosylated Chitosan Nanoparticles and Evaluation of Their Potential for Ocular Drug Delivery

This study was conducted to develop timolol maleate (TM)-loaded galactosylated chitosan (GC) nanoparticles (NPs) (TM-GC-NPs) followed by optimization via a four-level and three-factor Box–Behnken statistical experimental design. The optimized nanoparticles showed a particle size of 213.3?±?6.83 nm with entrapment efficiency of 38.58?±?1.31% and drug loading of 17.72?±?0.28%. The NPs were characterized with respect to zeta potential, pH, surface morphology, and differential scanning calorimetry (DSC). The determination of the oil–water partition coefficient demonstrated that the TM-GC-NPs had a high liposolubility at pH 6 as compared to timolol-loaded chitosan nanoparticles (TM-CS-NPs) and commercial TM eye drops. The in vitro release study indicated that TM-GC-NPs had a sustained release effect compared with the commercial TM eye drops. Ocular tolerance was studied by the hen’s egg chorioallantoic membrane (HET-CAM) assay and the formulation was non-irritant and could be used for ophthalmic drug delivery. The in vitro transcorneal permeation study and confocal microscopy showed enhanced penetration, and retention in the cornea was achieved with TM-GC-NPs compared with the TM-CS-NPs and TM eye drops. Preocular retention study indicated that the retention of TM-GC-NPs was significantly longer than that of TM eye drops. The in vivo pharmacodynamic study suggested TM-GC-NPs had a better intraocular pressure (IOP) lowering efficacy and a prolonged working time compared to commercial TM eye drops (P?≤?0.05). The optimized TM-GC-NPs could be prepared successfully promising their use as an ocular delivery system.     

Biodegradable Ocular Inserts for Sustained Delivery of Brimonidine Tartarate: Preparation and <Emphasis Type="Italic">In Vitro</Emphasis>/<Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

The bioavailability of therapeutic agents from eye drops is usually limited due to corneal barrier functions and effective eye protective mechanisms. Therefore, the current study aims to enhance ocular bioavailability of brimonidine, a potent antiglaucoma drug, through the preparation of ocular inserts. Solvent casting technique was employed to prepare the inserts using polyvinylpyrrolidone K-90 (PVP K-90) as film-forming polymer blended with different viscosity grades of bioadhesive polymers namely hydroxypropyl methycellulose, carbopol, sodium alginate, and chitosan. The prepared ocular inserts were evaluated for various physicochemical parameters, swelling behavior, and in vitro release patterns. Sodium alginate-based ocular inserts revealed the most sustainment in drug release (99% at 6 h), so it was selected for further modifications via coating it, on one side or dual sides, using hydrophobic film composed of either ethylcellulose or Eudragit RSPO. The obtained in vitro release results for the modified ocular inserts revealed that ethylcellulose is superior to Eudragit RSPO in terms of brimonidine release sustainment effect. Ocular inserts composed of 7% PVP K-90, 1.5% low molecular weight sodium alginate with or without ethylcellulose coat were able to sustain the in vitro release of brimonidine. Their therapeutic efficacy regarding intraocular pressure (IOP) lowering effect when inserted in albino rabbits eyes showed superior sustainment effect compared with that of brimonidine solution. Furthermore, due to both the mucoadhesive property and the drug sustainment effect, the one-side-coated ocular insert showed more IOP lowering effect compared with that of its non-coated or dual-side-coated counterpart.     

Nanovesicular Formulation of Brimonidine Tartrate for the Management of Glaucoma: <Emphasis Type="Italic">In Vitro</Emphasis> and <Emphasis Type="Italic">In Vivo</Emphasis> Evaluation

In this study, nanovesicles were developed for brimonidine tartrate by film hydration technique and dispersed in viscous carbopol solution for ocular delivery. Scanning electron microscopy revealed spherical shape of the vesicles. As high as 32.27% drug entrapment efficiency was achieved depending upon the surfactant/cholesterol molar ratio (7:4 to 7:8). The vesicles were in the size range of 298.0–587.9 nm. Release study showed a biphasic drug-release pattern for the lyophilized vesicular formulation in buffered saline solution, i.e., initial burst release followed by gradual release over the period of 8 h. On contrary, the isolated vesicles reduced the burst effect in 3 h by two to three times and the drug release was comparatively slower at the intermediate ratio in both cases. With variation in cholesterol content, the drug release followed either first order or Higuchi’s kinetics. Physically the lyophilized vesicular formulations were more stable at refrigerated temperature. DSC and X-RD analyses indicated loss of drug crystallinity in the vesicles. FTIR spectroscopy did not reveal any interaction between drug and excipients. The lyophilized formulation showed better ocular hypotensive activity than marketed drops on albino rabbits and in vivo efficacy was sustained up to 7.5 h. Furthermore, the formulation was found to be non-irritant to the rabbit eye. Hence, the lyophilized vesicles, when dispersed in viscous carbopol solution, had the potential in reducing dosing frequency and could improve patient compliance.     

Mucoadhesive bilayered tablets for buccal sustained release of flurbiprofen

The aim of this work was the design of sustained-release mucoadhesive bilayered tablets, using mixtures of mucoadhesive polymers and an inorganic matrix (hydrotalcite), for the topical administration of flurbiprofen in the oral cavity. The first layer, responsible for the tablet retention on the mucosa, was prepared by compression of a cellulose derivative and polyacrylic derivative blend. The second layer, responsible for buccal drug delivery, was obtained by compression of a mixture of the same (first layer) mucoadhesive polymers and hydrotalcite containing flurbiprofen. Nonmedicated tablets were evaluated in terms of swelling, mucosal adhesion, and organoleptic characteristics; in vitro and in vivo release studies of flurbiprofen-loaded tablets were performed as well. The best results were obtained from the tablets containing 20 mg of flurbiprofen, which allowed a good anti-inflammatory sustained release in the buccal cavity for 12 hours, ensuring efficacious salivary concentrations, and led to no irritation. This mucoadhesive formulation offers many advantages over buccal lozenges because it allows for reduction in daily administrations and daily drug dosage and is suitable for the treatment of irritation, pain, and discomfort associated with gingivitis, sore throats, laryngopharyngitis, cold, and periodontal surgery. Moreover, it adheres well to the gum and is simple to apply, which means that patient compliance is improved. Published: July 13, 2007     

Drug delivery to target the posterior segment of the eye

Retinal diseases are nowadays the most common causes of vision threatening in developed countries. Therapeutic advances in this field are hindered by the difficulty to deliver drugs to the posterior segment of the eye. Due to anatomical barriers, the ocular biodisponibility of systemically administered drugs remains poor, and topical instillation is not adequate to achieve therapeutic concentrations of drugs in the back of the eye. Ocular drug delivery has thus become one of the main challenges of modern ophthalmology. A multidisciplinary research is being conducted worldwide including pharmacology, biomaterials, ophthalmology, pharmaceutics, and biology. New promising fields have been developed such as implantable or injectable slow release intravitreal devices and degradable polymers, dispersed polymeric systems for intraocular drug delivery, and transscleral delivery devices such as iontophoresis, osmotic pumps or intra-scleraly implantable materials. The first clinical applications emerging from this research are now taking place, opening new avenues for the treatment of retinal diseases.     

PLGA Nanoparticles as Subconjunctival Injection for Management of Glaucoma

Nanoparticles fabricated from the biodegradable and biocompatible polymer, polylactic-co-glycolic acid (PLGA), could be a promising system for targeting ocular drug delivery. The objective of this work was to investigate the possibility of encapsulating brinzolamide in PLGA nanoparticles in order to be applied as a subconjunctival injection that could represent a starting point for developing new therapeutic strategies against increase in ocular pressure. The brinzolamide-loaded PLGA nanoparticles were fabricated using emulsion-diffusion-evaporation method with varying concentrations of Tween 80 or poloxamer 188 (Plx) in aqueous and organic phases. The nanoparticles were characterized in terms of particle size and size distribution, entrapment efficiency and in-vitro drug release pattern as well as DSC and X-ray analysis. Nanoparticles prepared using Tween 80 in the aqueous phase showed higher encapsulation efficiency and smaller particle size-values compared to those prepared using Plx. Furthermore, the addition of Plx 188 or Brij 97 to the organic phase in the formulation containing Tween 80 in the aqueous phase led to an increase in the particle diameter-values of the obtained nanoparticles. The nanoparticles had the capacity to release the brinzolamide in a biphasic release profile. The nanoparticles were spherical in shape and the drug was entraped in the nanoparticles in an amorphous form. Selected nanoparticles, injected subconjunctivally in normotensive Albino rabbits, were able to reduce the IOP for up to 10 days. Nanoparticles loaded with brinzolamide with lower particle size were able to reduce the IOP for longer period compared to those with higher particle size. Histopathological studies for the anterior cross sections of the rabbits’ eyes revealed that the tested nanoparticles were compatible with the ocular tissue. The overall results support that PLGA nanoparticles, applied as subconjunctival injection, can be considered as a promising carrier for ocular brinzolamide delivery with targeting delivery of the drug to the eye tissues.     

Faster onset of action with topical levocabastine than with oral cetirizine

This international multicentre, open-label, parallel-group trial was undertaken to compare the therapeutic efficacy and tolerability of topical levocabastine and oral cetirizine in patients with perennial allergic rhinoconjunctivitis, with particular reference to the comparative onset of action of the two drugs. A total of 207 patients were randomized to receive either levocabastine nasal spray (0.5 mg/ml, two sprays in each nostril twice daily) plus levocabastine eye drops as required (0.5 mg/ml, one drop in each eye twice daily p.r.n.) or cetirizine orally (10 mg once daily) with a treatment duration of 2 weeks. Onset of action was found to be significantly more rapid with levocabastine than with cetirizine for both nasal and ocular symptoms (p < 0.001). Within 15 min of study drug administration, 36% of levocabastine-treated patients reported relief from nasal symptoms and 32% relief from ocular symptoms compared with 10% and 17% of patients on cetirizine, respectively. At 1 h, the percentages of patients reporting relief were 76% and 38% for nasal symptoms, and 81% and 48% for ocular symptoms in the levocabastine and cetirizine treatment groups, respectively. At 8 h there were no differences between the two treatments. Overall therapeutic efficacy was found to be comparable in the two treatment groups over the 2-week study period with no significant intergroup differences in symptom severity or global therapeutic efficacy. Both drugs were well tolerated with no significant differences in the incidence or type of adverse reactions between the two groups. In conclusion, levocabastine eye drops and nasal spray are as effective and well tolerated as oral cetirizine for the treatment of perennial allergic rhinoconjunctivitis with the advantage of a significantly faster onset of action for both nasal and ocular symptoms.     

A Biodegradable,Sustained-Released,Prednisolone Acetate Microfilm Drug Delivery System Effectively Prolongs Corneal Allograft Survival in the Rat Keratoplasty Model

Frequent and long-term use of topical corticosteroids after corneal transplantation is necessary to prevent graft rejection. However, it relies heavily on patient compliance, and sustained therapeutic drug levels are often not achieved with administration of topical eye drops. A biodegradable drug delivery system with a controlled and sustained drug release may circumvent these limitations. In this study, we investigated the efficacy of a prednisolone acetate (PA)-loaded poly (d,l-lactide-co-ε-caprolactone) (PLC) microfilm drug delivery system on promoting the survival of allogeneic grafts after penetrating keratoplasty (PK) using a rat model. The drug release profiles of the microfilms were characterized (group 1). Subsequently, forty-eight PK were performed in four experimental groups: syngeneic control grafts (group 2), allogeneic control grafts (group 3), allogeneic grafts with subconjunctivally-implanted PA microfilm (group 4), and allogeneic grafts with PA eye drops (group 5; n = 12 in each). PA-loaded microfilm achieved a sustained and steady release at a rate of 0.006–0.009 mg/day, with a consistent aqueous drug concentration of 207–209 ng/ml. The mean survival days was >28 days in group 2, 9.9±0.8 days in group 3, 26.8±2.7 days in group 4, and 26.4±3.4 days in group 5 (P = 0.023 and P = 0.027 compared with group 3). Statistically significant decrease in CD4+, CD163+, CD 25+, and CD54+ cell infiltration was observed in group 4 and group 5 compared with group 3 (P<0.001). There was no significant difference in the mean survival and immunohistochemical analysis between group 4 and group 5. These results showed that sustained PA-loaded microfilm effectively prolongs corneal allograft survival. It is as effective as conventional PA eye drops, providing a promising clinically applicable alternative for patients undergoing corneal transplantation.     

Nanoemulsion as a Potential Ophthalmic Delivery System for Dorzolamide Hydrochloride

Dilutable nanoemulsions are potent drug delivery vehicles for ophthalmic use due to their numerous advantages as sustained effect and high ability of drug penetration into the deeper layers of the ocular structure and the aqueous humor. The aim of this article was to formulate the antiglaucoma drug dorzolamide hydrochloride as ocular nanoemulsion of high therapeutic efficacy and prolonged effect. Thirty-six systems consisting of different oils, surfactants, and cosurfactants were prepared and their pseudoternary-phase diagrams were constructed by water titration method. Seventeen dorzolamide hydrochloride nanoemulsions were prepared and evaluated for their physicochemical and drug release properties. These nanoemulsions showed acceptable physicochemical properties and exhibited slow drug release. Draize rabbit eye irritation test and histological examination were carried out for those preparations exhibiting superior properties and revealed that they were nonirritant. Biological evaluation of dorzolamide hydrochloride nanoemulsions on normotensive albino rabbits indicated that these products had higher therapeutic efficacy, faster onset of action, and prolonged effect relative to either drug solution or the market product. Formulation of dorzolamide hydrochloride in a nanoemulsion form offers, thus, a more intensive treatment of glaucoma, a decrease in the number of applications per day, and a better patient compliance compared to conventional eye drops.     

Novel Pentablock Copolymer-Based Nanoparticulate Systems for Sustained Protein Delivery

The design, synthesis, and application of novel biodegradable and biocompatible pentablock (PB) copolymers, i.e., polyglycolic acid-polycaprolactone-polyethylene glycol-polycaprolactone-polyglycolic acid (PGA-PCL-PEG-PCL-PGA) and polylactic acid-polycaprolactone-polyethylene glycol-polycaprolactone-polylactic acid (PLA-PCL-PEG-PCL-PLA) for sustained protein delivery, are reported. The PB copolymers can be engineered to generate sustained delivery of protein therapeutics to the posterior segment of the eye. PB copolymers with different block arrangements and molecular weights were synthesized by ring-opening polymerization and characterized by proton nuclear magnetic resonance (¹H-NMR), gel permeation chromatography (GPC), and X-ray diffraction (XRD) spectroscopy. Immunoglobulin G (IgG) was selected as a model protein due to its structural similarity to bevacizumab. The influence of polymer molecular weight, composition, and isomerism on formulation parameters such as entrapment efficiency, drug loading, and in vitro release profile was delineated. Crystallinity and molecular weight of copolymers exhibited a substantial effect on formulation parameters. A secondary structure of released IgG was confirmed by circular dichroism (CD) spectroscopy. In vitro cytotoxicity, cell viability, and biocompatibility studies performed on human retinal pigment epithelial cells (ARPE-19) and/or macrophage cell line (RAW 264.7) demonstrated PB copolymers to be excellent biomaterials. Novel PB polymers may be the answer to the unmet need of a sustained release protein formulation.KEY WORDS: block copolymers, controlled drug delivery, IgG, intravitreal, nanoparticles, ocular delivery, pentablock copolymers, posterior segment, protein therapeutics, sustained drug delivery     

Itraconazole loaded nano-structured lipid carrier for topical ocular delivery: Optimization and evaluation

Background & ObjectivesLow penetration efficiency and retention time are the main therapeutic concerns that make it difficult for most of the drugs to be delivered to the intraocular tissues. These challenging issues are often related to those drugs, which have low or poor solubility and low permeability. The goal of this study was designed to develop nanostructured lipid carriers (NLCs) loaded with itraconazole (ITZ) with the objective of enhancing topical ocular permeation and thereby improving clinical efficacy.Materials and MethodsITZ-loaded NLCs were fabricated by a high-speed homogenization technique using surfactant (Poloxamer 407), and lipids (stearic acid and oleic acid). Optimization of formulations was performed by 3 level factorial design and the selected formulation (F6) was evaluated by differential scanning calorimetry and transmission electron microscopy. Antifungal activity was assessed by measuring the zone of inhibition and irritation potential using the HET-CAM test.ResultsThe independent variables (lipid ratio-X₁ and percentage of emulsifier-X₂) have a positive impact on percentage entrapment efficiency (Y₂) and percentage release (Y₃) but have a negative impact on particle size (Y₁). Based on the better entrapment efficiency (94.65%), optimum particle size (150.67 nm), and percentage cumulative drug release (68.67%), batch F6 was selected for further evaluation. Electron microscopic images revealed that the prepared particles are spherical and have nano size. Antifungal studies demonstrated enhancement in the zone of inhibition by formulation F6 as compared to a commercial eye drop. The non-irritancy of optimized formulation (F6) was confirmed with a zero score.Interpretation & ConclusionIn summary, the optimized NLCs seem to be a potent carrier for the effective delivery of itraconazole in ocular therapy.     

Development of Microsponges for Topical Delivery of Mupirocin

The goal of the present study was to develop and evaluate microsponge-based topical delivery system of mupirocin for sustained release and enhanced drug deposition in the skin. Microsponges containing mupirocin were prepared by an emulsion solvent diffusion method. The effect of formulation and process variables such as internal phase volume and stirring speed on the physical characteristics of microsponges were examined on optimized drug/polymer ratio by 3² factorial design. The optimized microsponges were incorporated into an emulgel base. In vitro drug release, ex vivo drug deposition, and in vivo antibacterial activity of mupirocin-loaded formulations were studied. Developed microsponges were spherical and porous, and there was no interaction between drug and polymer molecules. Emulgels containing microsponges showed desired physical properties. Drug release through cellulose dialysis membrane showed diffusion-controlled release pattern and drug deposition studies using rat abdominal skin exhibited significant retention of active in skin from microsponge-based formulations by 24 h. The optimized formulations were stable and nonirritant to skin as demonstrated by Draize patch test. Microsponges-based emulgel formulations showed prolonged efficacy in mouse surgical wound model infected with S. aureus. Mupirocin was stable in topical emulgel formulations and showed enhanced retention in the skin indicating better potential of the delivery system for treatment of primary and secondary skin infections, such as impetigo, eczema, and atopic dermatitis.     

Potentiation by promethazine of hypotensive effects of adrenergic drugs on intraocular pressure]

Experiments including previous installations of promethazine (pipolphen) into the conjunctival sac followed by the topical administration of beta-adrenergic blocker timolol or a sympathomimetic drug isoptoepinal (adrenaline) have been performed on 24 rabbits (48 eyes). The substantial changes in the action mode of the mentioned drugs as the enhancement of their hypotensive effect on the intraocular pressure (IOP) have been demonstrated under the performance of the above mentioned procedure. When applied after promethazine instillations, timolol induced significantly increased outflow facility of the aqueous humor that was not usually noted in the cases of timolol topical instillations without a pretreatment of the eye with promethazine. The similar increased hypotensive effect on the IOP was noted for adrenaline when it has been used after promethazine treatment. The possible mechanisms underlying the changes in pharmacological activities of the investigated adrenergic drugs are discussed.     

Lipospheres as Carriers for Topical Delivery of Aceclofenac: Preparation,Characterization and <Emphasis Type="BoldItalic">In Vivo</Emphasis> Evaluation

The purpose of this study was to prepare lipospheres containing aceclofenac intended for topical skin delivery with the aim of exploiting the favorable properties of this carrier system and developing a sustained release formula to overcome the side effects resulting from aceclofenac oral administration. Lipospheres were prepared using different lipid cores and phospholipid coats adopting melt and solvent techniques. Characterization was carried out through photomicroscopy, scanning electron microscopy, particle size analysis, DSC, In vitro drug release and storage study. The anti-inflammatory effect of liposphere systems was assessed by the rat paw edema technique and compared to the marketed product. Results revealed that liposphere systems were able to entrap aceclofenac at very high levels (93.1%). The particle size of liposphere systems was well suited for topical drug delivery. DSC revealed the molecular dispersion of aceclofenac when incorporated in lipospheres. Both entrapment efficiency and release were affected by the technique of preparation, core and coat types, core to coat ratio and drug loading. Lipospheres were very stable after 3 months storage at 2–8°C manifested by low leakage rate (less than 7%) and no major changes in particle size. Finally, liposphere systems were found to possess superior anti-inflammatory activity compared to the marketed product in both lotion and paste consistencies. Liposphere systems proved to be a promising topical system for the delivery of aceclofenac as they possessed the ability to entrap the drug at very high levels and high stability, and to sustain the anti-inflammatory effect of the drug.     

Nanomaterials for ocular drug delivery

Efficient drug delivery to the eye remains a challenging task for pharmaceutical scientists. Due to the various anatomical barriers and the clearance mechanisms prevailing in the eye, conventional drug delivery systems, such as eye drop solutions, suffer from low bioavailability. More invasive methods, such as intravitreal injections and implants, cause adverse effects in the eye. Recently, an increasing number of scientists have turned to nanomaterial-based drug delivery systems to address the challenges faced by conventional methods. This paper highlights recent applications of various nanomaterials, such as polymeric micelles, hydrogels, liposomes, niosomes, dendrimers, and cyclodextrins as ocular drug delivery systems to enhance the bioavailability of ocular therapeutic agents.     

Carbonic Anhydrase Inhibitors. Metal Complexes of 5-(2-Chlorophenyl)-1, 3, 4-Thiadiazole-2-Sulfonamide with Topical Intraocular Pressure Lowering Properties: The Influence of Metal Ions Upon the Pharmacological Activity

Metal complexes of a sulfonamide possessing strong carbonic anhydrase (CA) inhibitory properties, 5-(2-chlorophenyl)-1, 3, 4-thiadiazole-2-sulfonamide (chlorazolamide) have been obtained from the sodium salt of the sulfonamide and the following metal ions: Mg(II), Zn(II), Mn(II), Cu(II), Co(II), Ni(II), Be(II), Cd(II), Pb(II), AI(III), Fe(III) and La(III). The original sulfonamide and its complexes were assayed for the in vitro inhibition of three CA isozymes, CA I, II, and IV, some of which play a critical role in ocular fluid secretion. All these compounds (the sulfonamide and its metal complexes) behaved as powerful inhibitors against the three investigated isozymes. The parent sulfonamide possessed an extremely weak topical pressure lowering effect when administered as a 1-2% suspension into the rabbit eye, but some of its metal complexes, such as the Mg(II), Zn(II), Mn(II) and Cu(II) derivatives, lower intraocular pressure (IOP) in experimental animals very well. Ex vivo data showed a 99.5-99.9% CA II inhibition in ocular fluids and tissues of rabbits treated with these agents, proving that the observed IOP lowering is due to CA inhibition. The influence of the different metal ions upon the efficiency of the obtained complexes as pressure lowering drugs are discussed, leading to the possibility of designing more selective; potent pharmacological agents from this class     

Carbonic anhydrase inhibitors. metal complexes of 5-(2-chlorophenyl)-1,3,4-thiadiazole-2-sulfonamide with topical intraocular pressure lowering properties: the influence of metal ions upon the pharmacological activity

Metal complexes of a sulfonamide possessing strong carbonic anhydrase (CA) inhibitory properties, 5-(2-chlorophenyl)-1,3,4-thiadiazole-2-sulfonamide (chlorazolamide) have been obtained from the sodium salt of the sulfonamide and the following metal ions: Mg(II), Zn(II), Mn(II), Cu(II), Co(II), Ni(II), Be(II), Cd(II), Pb(II), Al(III), Fe(III) and La(III). The original sulfonamide and its complexes were assayed for the in vitro inhibition of three CA isozymes, CA I, II, and IV, some of which play a critical role in ocular fluid secretion. All these compounds (the sulfonamide and its metal complexes) behaved as powerful inhibitors against the three investigated isozymes. The parent sulfonamide possessed an extremely weak topical pressure lowering effect when administered as a 1-2% suspension into the rabbit eye, but some of its metal complexes, such as the Mg(II), Zn(II), Mn(II) and Cu(II) derivatives, lower intraocular pressure (IOP) in experimental animals very well. Ex vivo data showed a 99.5-99.9% CA II inhibition in ocular fluids and tissues of rabbits treated with these agents, proving that the observed IOP lowering is due to CA inhibition. The influence of the different metal ions upon the efficiency of the obtained complexes as pressure lowering drugs are discussed, leading to the possibility of designing more selective/potent pharmacological agents from this class.