The role of microbial biofilms in deterioration of space station candidate materials

Formation of microbial biofilms on surfaces of a wide range of materials being considered as candidates for use on the International Space Station was investigated. The materials included a fibre-reinforced polymeric composite, an adhesive sealant, a polyimide insulation foam, teflon cable insulation, titanium, and an aliphatic polyurethane coating. They were exposed to a natural mixed population of bacteria under controlled conditions of temperature and relative humidity (RH). Biofilms formed on the surfaces of the materials at a wide range of temperatures and RHs. The biofilm population was dominated by Pseudomonas aeruginosa, Ochrobactrum anthropi, Alcaligenes denitrificans, Xanthomonas maltophila, and Vibrio harveyi. The biocide, diiodomethyl-p-tolyl sulfone, impregnated in the polyurethane coating, was ineffective against microbial colonization and growth. Degradation of the polyurethane coatings was monitored with electrochemical impedance spectroscopy (EIS). The impedance spectra indicated that microbial degradation of the coating occurred in several stages. The initial decreases in impedance were due to the transport of water and solutes into the polymeric matrices. Further decreases were a result of polymer degradation by microorganisms. Our data showed that these candidate materials for space application are susceptible to biofilm formation and subsequent degradation. Our study suggests that candidate materials for use in space missions need to be carefully evaluated for their susceptibility to microbial biofilm formation and biodegradation.     

Microbial colonization of polymeric materials for space applications and mechanisms of biodeterioration: A review

Biodeterioration of polymeric materials affects a wide range of industries. Formation of microbial biofilms on surfaces of materials being considered for use on the International Space Station was investigated. The materials included fiber-reinforced polymeric composites, adhesive sealant, polyimide insulation foam, Teflon cable insulation, and aliphatic polyurethane coatings. In simulation experiments, bacterial biofilms formed readily on the surfaces of the materials at a wide range of temperatures and relative humidity. The biofilm population was dominated by Pseudomonas aeruginosa, Ochrobactrum anthropi, Alcaligenes denitrificans, Xanthomonas maltophila, and Vibrio harveyi. Subsequently, degradation of polymeric materials was mostly a result of both fungal and bacterial colonization in sequence, and fungi may have advantages in the early phase of surface colonization over bacteria, especially on relatively resistant polymeric materials. These microorganisms are commonly detected on spacecraft on hardware and in the air. Furthermore, degradation of polymeric materials was documented with electrochemical impedance spectroscopy (EIS). The mechanisms of deterioration of polymeric materials were due to the availability of carbon source from the polymer, such as additives, plasticizers, and other impurities, in addition to the polymeric matrices. Microbial degradation of plasticizer phthalate esters is discussed for the microorganisms involved and the biochemical pathways of degradation. Current results suggest that candidate materials for use in space missions need to be carefully evaluated for their susceptibility to microbial biofilm formation and biodegradation.     

Lignin degradation by microorganisms: A review

Lignin is an abundant plant-based biopolymer that has found applications in a variety of industries from construction to bioethanol production. This recalcitrant branched polymer is naturally degraded by many different species of microorganisms, including fungi and bacteria. These microbial lignin degradation mechanisms provide a host of possibilities to overcome the challenges of using harmful chemicals to degrade lignin biowaste in many industries. The classes and mechanisms of different microbial lignin degradation options available in nature form the primary focus of the present review. This review first discusses the chemical building blocks of lignin and the industrial sources and applications of this multifaceted polymer. The review further places emphasis on the degradation of lignin by natural means, discussing in detail the lignin degradation activities of various fungal and bacterial species. The lignin-degrading enzymes produced by various microbial species, specifically white-rot fungi, brown-rot fungi, and bacteria, are described. In the end, possible directions for future lignin biodegradation applications and research investigations have been provided.     

Degradation of different pectins by fungi: correlations and contrasts between the pectinolytic enzyme sets identified in genomes and the growth on pectins of different origin

ABSTRACT: BACKGROUND: Pectins are diverse and very complexe biomolecules and their structure depends on the plant species and tissue. It was previously shown that derivatives of pectic polymers and oligosaccharides from pectins have positive effects on human health. To obtain specific pectic oligosaccharides, highly defined enzymatic mixes are required. Filamentous fungi are specialized in plant cell wall degradation and some produce a broad range of pectinases. They may therefore shed light on the enzyme mixes needed for partial hydrolysis. RESULTS: The growth profiles of 12 fungi on four pectins and four structural elements of pectins show that the presence/absence of pectinolytic genes in the fungal genome clearly correlates with their ability to degrade pectins. However, this correlation is less clear when we zoom in to the pectic structural elements. CONCLUSIONS: This study highlights the complexity of the mechanisms involved in fungal degradation of complex carbon sources such as pectins. Mining genomes and comparative genomics are promising first steps towards the production of specific pectinolytic fractions.     

Fiber-reinforced polymeric composites are susceptible to microbial degradation

A mixed culture of fungi, enriched from degraded polymeric materials, formed biofilms on coupons of fiber-reinforced polymeric composites (FRPCs). They grew actively in aqueous extracts of the composites under ambient conditions. The data indicate that the fungi utilized the resins or fiber chemical sizing as carbon and energy sources. A progressive decline in impedance from above 10⁷ Ohms to below 10⁶ Ohms was detected in the inoculated FRPC panels by electrochemical impedance spectroscopy (EIS) after 179 days of incubation, but not on the sterile controls. The degradation proceeds through an initial ingress of water into the resins, followed by degradation of bonding between fiber surfaces and resins and finally separation of fibers from the resins. At the end of EIS study, the extent of disbonding in the inoculated composite was greater than the control observed by scanning electron microscopy. These results suggest that the composite materials are susceptible to microbial attack by providing nutrients for growth. Received 06 December 1996/ Accepted in revised form 10 March 1997     

Fungal degradation of carbohydrate-linked polystyrenes

A series of carbohydrate molecules like glucose, sucrose and lactose were linked to maleic anhydride functionalized polystyrene by polymer analogous reactions to produce biodegradable polymers. Pure culture system was used for evaluating the biodegradability of these sugar linked polystyrene-maleic anhydride copolymers by known fungal test organisms. Weight loss measurements after fungal treatment confirmed the biodegradability of the carbohydrate-linked polymers, and it was observed that the degree of susceptibility to degradation varied with the type of test organism as well as with the type of sugar. FTIR spectra confirmed the degradation of the polymer.     

Fourier transform infrared microscopy and imaging: detection of fungi in wood

FTIR microscopy was used to detect and discriminate the two wood decaying fungi Trametes versicolor and Schizophyllum commune in experimentally infected beech wood blocks. The distribution of fungal mycelium in wood was locally resolved and semiquantitatively recorded using FTIR microscopy combined with a focal plane array detector and image analysis. Cluster analysis revealed major differences between FTIR spectra recorded from wood fibers and empty vessel lumina and spectra from mycelium of both fungal species, irrespective of whether the fungi were grown on the surface of wood or inside vessel lumina. Species-specific clustering of spectra of fungal mycelium grown on the wood surface and inside vessel lumina demonstrated the potential of FTIR microscopy to discriminate among fungal species decaying wood.     

Feasibility of bioremediation by white-rot fungi

The ligninolytic enzymes of white-rot fungi have a broad substrate specificity and have been implicated in the transformation and mineralization of organopollutants with structural similarities to lignin. This review presents evidence for the involvement of these enzymes in white-rot fungal degradation of munitions waste, pesticides, polychlorinated biphenyls, polycyclic aromatic hydrocarbons, bleach plant effluent, synthetic dyes, synthetic polymers, and wood preservatives. Factors relating to the feasibility of using white-rot fungi in bioremediation treatments for organopollutants are discussed.     

The importance of fungal pathogens and antifungal coatings in medical device infections

In recent years, increasing evidence has been collated on the contributions of fungal species, particularly Candida, to medical device infections. Fungal species can form biofilms by themselves or by participating in polymicrobial biofilms with bacteria. Thus, there is a clear need for effective preventative measures, such as thin coatings that can be applied onto medical devices to stop the attachment, proliferation, and formation of device-associated biofilms.However, fungi being eukaryotes, the challenge is greater than for bacterial infections because antifungal agents are often toxic towards eukaryotic host cells. Whilst there is extensive literature on antibacterial coatings, a far lesser body of literature exists on surfaces or coatings that prevent attachment and biofilm formation on medical devices by fungal pathogens. Here we review strategies for the design and fabrication of medical devices with antifungal surfaces. We also survey the microbiology literature on fundamental mechanisms by which fungi attach and spread on natural and synthetic surfaces. Research in this field requires close collaboration between biomaterials scientists, microbiologists and clinicians; we consider progress in the molecular understanding of fungal recognition of, and attachment to, suitable surfaces, and of ensuing metabolic changes, to be essential for designing rational approaches towards effective antifungal coatings, rather than empirical trial of coatings.     

Detection of cellulolytic activity of bacteria and fungi growing on agar surfaces

Summary Cellulolytic activity of four fungal species growing on solid medium containing acid-swollen cellulose could be detected much more easily if fungal growth was partly inhibited by the detergent Triton X-100. The dye, aniline blue-black, did not affect growth but increased the sensitivity of detection of cellulolytic activity of both fungi and bacteria. Separating fungi from cellulose fibres by a layer of agar or by filters showed that cell-fibre contact is not necessary for cellulose degradation. Such degradation is clearer when contact is prevented.     

Diversity and Antimicrobial Activity of Culturable Fungi Isolated from Six Species of the South China Sea Gorgonians

Fungi in gorgonians are now known to cause gorgonian diseases, but little attention has been paid to the nature of fungal communities associated with gorgonians. The diversity of culturable fungi associated with six species of healthy South China Sea gorgonians were investigated using a culture-dependent method followed by analysis of fungal internal transcribed spacer sequences. A total of 121 fungal isolates were recovered and identified using the Basic Local Alignment Search Tool search program. These belonged to 41 fungal species from 20 genera. Of these, 30 species and 12 genera are new reports for gorgonians, and the genera Aspergillus and Penicillium were the most diverse and common in the six gorgonian species. Comparison of the fungal communities in the six gorgonian species, together with results from previous relevant studies, indicated that different gorgonian species and the same gorgonian species living in different geographic locations had different fungal communities. The gorgonian Dichotella gemmacea harbored the most fungal species and isolates, while Echinogorgia aurantiaca had the least fungal diversity. Among the six media used for fungal isolation, potato glucose agar yielded the highest isolates (27 isolates), while glucose peptone starch agar had the best recoverability of fungal species (15 species). The antimicrobial activity of the 121 fungal isolates was tested against three marine bacteria and two marine gorgonian pathogenic fungi. A relatively high proportion (38?%) of fungal isolates displayed distinct antibacterial and antifungal activity, suggesting that the gorgonian-associated fungi may aid their hosts in protection against pathogens. This is the first report comparing the diversity of fungal communities among the South China Sea gorgonians. It contributes to our knowledge of gorgonian-associated fungi and further increases the pool of fungi available for natural bioactive product screening.     

Microbial degradation of nonylphenol and other alkylphenols—our evolving view

Because the endocrine disrupting effects of nonylphenol (NP) and octylphenol became evident, the degradation of long-chain alkylphenols (AP) by microorganisms was intensively studied. Most NP-degrading bacteria belong to the sphingomonads and closely related genera, while NP metabolism is not restricted to defined fungal taxa. Growth on NP and its mineralization was demonstrated for bacterial isolates, whereas ultimate degradation by fungi still remains unclear. While both bacterial and fungal degradation of short-chain AP, such as cresols, and the bacterial degradation of long-chain branched AP involves aromatic ring hydroxylation, alkyl chain oxidation and the formation of phenolic polymers seem to be preferential elimination pathways of long-chain branched AP in fungi, whereby both intracellular and extracellular oxidative enzymes may be involved. The degradation of NP by sphingomonads does not proceed via the common degradation mechanisms reported for short-chain AP, rather, via an unusual ipso-substitution mechanism. This fact underlies the peculiarity of long-chain AP such as NP isomers, which possess highly branched alkyl groups mostly containing a quaternary α-carbon. In addition to physicochemical parameters influencing degradation rates, this structural characteristic confers to branched isomers of NP a biodegradability different to that of the widely used linear isomer of NP. Potential biotechnological applications for the removal of AP from contaminated media and the difficulties of analysis and application inherent to the hydrophobic NP, in particular, are also discussed. The combination of bacteria and fungi, attacking NP at both the phenolic and alkylic moiety, represents a promising perspective.     

真菌草酸的代谢和作用研究进展

草酸(oxalic acid)是一种重要的生物代谢产物,广泛分布于植物、动物和微生物中,在不同的生命体中发挥重要功能.本文回顾了国内外关于真菌草酸的相关研究进展.许多真菌能够分泌草酸,包括植物病原真菌、食药用真菌及工业真菌等.草酸作为一种简单的二元羧酸,在真菌中主要通过三羧酸循环途径、乙醛酸循环途径和草酰乙酸途径合成....     

Fermentation of woods by rumen anaerobic fungi

Abstract The potential of rumen anaerobic fungi for fermenting untreated woods has been assessed using two Neocallimastix species isolated from sheep. When a strain of N. frontalis was incubated for 11 days with wood from 12 hardwood (angiosperm) species, many woods were measurably fermented, with wood from Populus tremuloides (32%) and Fagus sylvatica (21%) being the most highly degraded. This N. frontalis solubilised celulose, hemicellulose and lignin in P. tremuloides wood. Lower degradation (17%) of P. tremuloides wood by a different species of Neocallimastix showed that the choice of fungus as well as the structure and chemistry of the wood influenced the amount of wood cell wall degraded by anaerobic fungi. The amount of degradation was not related to the length of fungal rhizoids.     

青藏高原高寒草地AM真菌分布及其对近自然恢复的生态作用

超载过牧以及全球气候变化等导致大部分青藏高原高寒草地呈现持续退化态势。青藏高原高寒草地退化致使地上植物群落逐渐发生更替,地下土壤微生物群落多样性和丰富度发生改变。本文旨在探析青藏高原高寒草地丛枝菌根（arbuscular mycorrhizal,AM）真菌的分布特征、对近自然恢复的生理生态效应及其作用机制。青藏高原高寒草地中已报道4目14属61种AM真菌,约占已知AM真菌物种的20%。高寒草地禾本科植物根围AM真菌物种丰度最高,而莎草科植物根围AM真菌孢子密度最高。3种高寒草地植被类型中,高寒草原AM真菌丰度最高（33种）,山地灌丛草原次之（32种）,高寒草甸最低（22种）。高寒草原以光壁无梗囊霉Acaulospora laevis和闪亮和平囊霉Pacispora scintillans为优势种,山地灌丛草原以摩西斗管囊霉Funneliformis mosseae为优势种,高寒草甸以光壁无梗囊霉A. laevis、近明球囊霉Claroideoglomus claroideum和闪亮和平囊霉P. scintillans为优势种。高寒草地土著AM真菌与植物构建的菌根网络可以通过调节营养元素吸收、分配,促进植物建植和生长;但是毒杂草入侵可以改变土著AM真菌物种多样性和菌根网络,限制本地植被的实际生态位扩张。退化高寒草地中,AM真菌群落具有高的环境适应性和恢复力,其不仅调控地上植物群落建植和多样性,同时AM真菌建植也增加了代谢产物-球囊霉素相关土壤蛋白产生,进而协同改善地下土壤微生态系统,为退化高寒草地早期植被恢复塑造土壤生境。因此,AM真菌在退化高寒草地近自然恢复中具有较大的应用潜力。     

中国中部太白山不同海拔杜鹃兰根部内生真菌多样性

本研究以太白山自然保护区蒿坪站杜鹃兰Cremastra appendiculata为材料,采用菌丝团和根组织分离法进行真菌分离,并用ITS序列分子鉴定;用变性梯度凝胶电泳(denaturing gradient gel electrophoresis,DGGE)分析根部内生真菌多样性,研究海拔和根际土理化性质对真菌多样...     

Fungal pigments inhibit the matrix-assisted laser desorption/ionization time-of-flight mass spectrometry analysis of darkly pigmented fungi

Matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS) has been used to discriminate moniliaceous fungal species; however, darkly pigmented fungi yield poor fingerprint mass spectra that contain few peaks of low relative abundance. In this study, the effect of dark fungal pigments on the observed MALDI mass spectra was investigated. Peptide and protein samples containing varying concentrations of synthetic melanin or fungal pigments extracted from Aspergillus niger were analyzed by MALDI–TOF and MALDI–qTOF (quadrupole TOF) MS. Signal suppression was observed in samples containing greater than 250 ng/μl pigment. Microscopic examination of the MALDI sample deposit was usually heterogeneous, with regions of high pigment concentration appearing as black. Acquisition of MALDI mass spectra from these darkly pigmented regions of the sample deposit yielded poor or no [M+H]⁺ ion signal. In contrast, nonpigmented regions within the sample deposit and hyphal negative control extracts of A. niger were not inhibited. This study demonstrated that dark fungal pigments inhibited the desorption/ionization process during MALDI–MS; however, these fungi may be successfully analyzed by MALDI–TOF MS when culture methods that suppress pigment expression are used. The addition of tricyclazole to the fungal growth media blocks fungal melanin synthesis and results in less melanized fungi that may be analyzed by MALDI–TOF MS.     

Molecular diversity of fungal phylotypes co-amplified alongside nematodes from coastal and deep-sea marine environments

Nematodes and fungi are both ubiquitous in marine environments, yet few studies have investigated relationships between these two groups. Microbial species share many well-documented interactions with both free-living and parasitic nematode species, and limited data from previous studies have suggested ecological associations between fungi and nematodes in benthic marine habitats. This study aimed to further document the taxonomy and distribution of fungal taxa often co-amplified from nematode specimens. A total of 15 fungal 18S rRNA phylotypes were isolated from nematode specimens representing both deep-sea and shallow water habitats; all fungal isolates displayed high pairwise sequence identities with published data in Genbank (99-100%) and unpublished high-throughput 454 environmental datasets (>95%). BLAST matches indicate marine fungal sequences amplified in this study broadly represent taxa within the phyla Ascomycota and Basidiomycota, and several phylotypes showed robust groupings with known taxa in phylogenetic topologies. In addition, some fungal phylotypes appeared to be present in disparate geographic habitats, suggesting cosmopolitan distributions or closely related species complexes in at least some marine fungi. The present study was only able to isolate fungal DNA from a restricted set of nematode taxa; further work is needed to fully investigate the taxonomic scope and function of nematode-fungal interactions.     

Fungal communities associated with degradation of polyester polyurethane in soil

Soil fungal communities involved in the biodegradation of polyester polyurethane (PU) were investigated. PU coupons were buried in two sandy loam soils with different levels of organic carbon: one was acidic (pH 5.5), and the other was more neutral (pH 6.7). After 5 months of burial, the fungal communities on the surface of the PU were compared with the native soil communities using culture-based and molecular techniques. Putative PU-degrading fungi were common in both soils, as <45% of the fungal colonies cleared the colloidal PU dispersion Impranil on solid medium. Denaturing gradient gel electrophoresis showed that fungal communities on the PU were less diverse than in the soil, and only a few species in the PU communities were detectable in the soil, indicating that only a small subset of the soil fungal communities colonized the PU. Soil type influenced the composition of the PU fungal communities. Geomyces pannorum and a Phoma sp. were the dominant species recovered by culturing from the PU buried in the acidic and neutral soils, respectively. Both fungi degraded Impranil and represented >80% of cultivable colonies from each plastic. However, PU was highly susceptible to degradation in both soils, losing up to 95% of its tensile strength. Therefore, different fungi are associated with PU degradation in different soils but the physical process is independent of soil type.     

Ecology and diversity of leaf litter fungi during early-stage decomposition in a seasonally dry tropical forest

Leaf litter samples of 12 dicotyledonous tree species (belonging to eight families) growing in a dry tropical forest and in early stages of decomposition were studied for the presence of litter fungi. Equal-sized segments of the leaves incubated in moist chambers were observed every day for 30 d for the presence of fungi. Invariably, the fungal assemblage on the litter of each tree species was dominated by a given fungal species. The diversity of fungi present in the litter varied with the tree species although many species of fungi occurred in the litter of all 12 species. A Pestalotiopsis species dominated the litter fungal assemblage of five trees and was common in the litter of all tree species. The present study and earlier studies from our lab indicate that fungi have evolved traits such as thermotolerant spores, ability to utilize toxic furaldehydes, ability to produce cell wall destructuring enzymes and an endophyte-litter fungus life style to survive and establish themselves in fire-prone forests such as the one studied here. This study shows that in the dry tropical forest, the leaf litter fungal assemblage is governed more by the environment than by the plant species.