Modelling protein three-dimensional structure using tritium planigraphy

We propose the use of data on the topography of the label-accessible surface of a protein molecule obtained by the method of tritium planigraphy as a criterion for choosing the optimal intermediate arrangements of alpha-helices in globular proteins so as to model their three-dimensional structures. This approach has been used for modelling the three-dimensional structure of parvalbumin III from pike. The proposed model has been compared with high-resolution X-ray structural data for a related protein, paryvalbumin from carp. The possibilities and limitations of this approach are discussed.     

Modeling of protein spatial structure using tritium planigraphy

The results of protein spatial structure modeling using the tritium planigraphy technique are presented. The knowledge of 3D structure of macromolecules is obligatory for understanding the basic mechanisms of interaction in biological systems and complex technological processes. Known limitations of the X-ray analysis (crystal state) and NMR (molecular weight) make it necessary to seek new approaches to modeling the spatial structure of proteins. Semiempirical tritium planigraphy is one of these approaches. The method is based on bombardment of the object with a beam of hot tritium atoms (E _at ≥ 0.3 eV) and computer simulation. On the example of proteins of different structural classes, we show that this integrated approach can yield a 3D model well consistent with the X-ray data. An important factor is the sequence of searching for contacts between secondary structure elements: the best fit with the native structure is achieved by assembling the elements from the N- to the C-terminus of the polypeptide chain.     

Study of the interaction between cytochrome c and cytochrome oxidase by tritium planigraphy

Treatment of molecular crystals of the bovine cytochrome oxidase and the cytochrome oxidase-cytochrome c complex with thermally activated tritium leads to highly labelled cytochrome oxidase preparations. HPLC separation of its subunits and measurements of radioactivity of each polypeptide allow to determine the shielding of cytochrome oxidase surface sites by cytochrome c in the complex.     

Determination of the accessible surface of globular proteins by means of tritium planigraphy

Results are presented for proteins with known three-dimensional structure (lysozyme, myoglobin, ribonuclease), which show that the probability of label incorporation upon bombardment by hot tritium atoms may be quantitatively linked with the surface area of the protein accessible to water molecules. Possible deviations from simple linear dependency caused by particular mechanisms of label introduction are discussed. The data obtained in experiments with model systems were used to determine the accessible surface area of human serum albumin, for which structural data is not sufficiently accurate to allow estimation of accessible surface area. Experimental data correlate reasonably well with estimations based on conventional concepts of the relationship between accessible surface area and molecular weight for globular proteins. Correspondence to: A. V. Volynskaya     

Investigation of helical plant virus ribonucleoprotein structures with the help of tritium planigraphy and theoretical modeling

The results of the studies of helical plant virus structures by tritium planigraphy (TP) method are discussed. TP method is based on bombardment of macromolecular objects with a stream of tritium atoms, followed by analysis of tritium label distribution along the macromolecule. By combining the TP data with the results of theoretical predictions of the protein structure, it turned out to be possible to propose a model of the coat protein structure in the virions of potato virus X (the type member of potexvirus group) and potato virus A (one of the members of potyvirus group). With the help of TP it also managed to find subtle differences in the coat protein structure between wildtype tobacco mosaic virus (strain U1) and its mutant with two amino acid substitutions in the coat protein and alter host specificity.     

Reticulated lipid probe fluorescence reveals MDCK cell apical membrane topography.

High spatial resolution confocal microscopy of young MDCK cells stained with the lipophilic probe 1,1'-dihexadecyl-3,3,3',3'- tetramethylindocarbocyanine perchlorate (DiIC(16)) revealed a reticulated fluorescence pattern on the apical membrane. DiIC(16) was delivered as crystals to live cells to minimize possible solvent perturbations of the membrane lipids. The ratio of the integrated fluorescence intensities in the bright versus dim regions was 1.6 +/- 0.1 (n = 13). Deconvolved images of the cells were consistent with exclusive plasma membrane staining. Multi-spectral and fluorescence anisotropy microscopy did not reveal differences between bright and dim regions. Bright regions coincided with microvilli and microridges observed by differential interference contrast microscopy and were stable for several minutes. Fluorescence recovery after photobleaching yielded similar diffusion coefficients (pooled D = 1.5 +/- 0.6 x 10(-9) cm(2)/s, n = 40) for both bright and dim regions. Line fluorescence recovery after photobleaching showed that the reticulated pattern was maintained as the fluorescence recovered in the bleached areas. Cytochalasin D did not affect the staining pattern, but the pattern was eliminated by cholesterol depletion with methyl-beta-cyclodextrin. We conclude that the reticulated fluorescence pattern was caused by increased optical path lengths through the microvilli and microridges compared with the flat areas on the apical membrane.     

New approaches to the study of sphingolipid enriched membrane domains: The use of microscopic autoradiography to reveal metabolically tritium labeled sphingolipids in cell cultures

This paper is the first report on the use of the electron microscopy autoradiography technique to detect metabolically tritium labeled sphingolipids in intact cells in culture.To label cell sphingolipids, human fibroblasts in culture were fed by a 24 hours pulse, repeated 5 times, of 3×10^–7 M [1-³H]sphingosine. [1-³H]sphingosine was efficently taken up by the cells and very rapidly used for the biosynthesis of complex sphingolipids, including neutral glycolipids, gangliosides, ceramide and sphingomyelin. The treatment with [1-³H]sphingosine did not induce any morphological alteration of cell structures, and well preserved cells, plasma membranes, and intracellular organelles could be observed by microscopy.Ultrathin sections from metabolic radiolabeled cells were coated with autoradiographic emulsion. One to four weeks of exposition resulted in pictures where the location of radioactive sphingolipids was evidenced by the characteristic appearance of silver grains as irregular coiled ribbons of metallic silver. Radioactive sphingolipids were found at the level of the plasma membranes, on the endoplasmic reticulum and inside of cytoplasmic vesicles. Thus, electron microscopy autoradiography is a very useful technique to study sphingolipid-enriched membrane domain organization and biosynthesis.     

Comparative study of the phenylalanyl-tRNA synthetases from Escherichia coli and Thermus thermophlus by the tritium topography method

A comparative study of thermostability and aminoacid composition of the phenylalanyl-tRNA synthetases from E. coli and Thermus thermophilus HB8 has been carried out. Compared with the mesophilic enzyme, a considerable increase of Pro, Leu, Phe, Arg and decrease of Asx, Ile, Ser, Thr and Lys content have been revealed in the thermophilic protein. Using tritium topography, Pro, (Leu + Ile) and Gly were found to be the most accessible on the surfaces of both the enzymes. In the E. coli enzyme, Thr residues were also easy to access while on the surface of the thermophilic enzyme there were more Arg residues. The quantitative assay of the surface compositions revealed the increased exposure of the (Leu + Ile) residues on the thermophilic protein as well as of the charged Asx and Arg residues. A possible correlation of the observed effects with thermostability is discussed.     

A comparative study of phenylalanyl-tRNA synthetases from Escherichia coli and Thermus thermophilus by the tritium topography method

A comparative study of thermostability and amino acid composition of phenylalanyl-tRNA synthetases from E. coli and Thermus thermophilus HB8 has been carried out. In the thermophilic protein the proline, leucine, phenylalanine, arginine content was considerably increased, whereas that of asparagine, isoleucine, serine, threonine and lysine was decreased as compared to the mesophilic protein. Using tritium topography, Pro, (Leu + Ile) and Gly were found to be the most accessible on the surfaces of the both enzymes. In the E. coli enzyme the threonine residues were also easy to access, while on the surface of the thermophilic enzyme arginine residues were more abundant. A quantitative assay of the surface compositions revealed the increased exposure of (Leu + Ile) residues in the thermophilic protein as well as of the charged asparagine and arginine residues. A possible relationship of the observed effects to thermostability is discussed.     

New approaches to the study of sphingolipid enriched membrane domains: the use of electron microscopic autoradiography to reveal metabolically tritium labeled sphingolipids in cell cultures

This paper is the first report on the use of the electron microscopy autoradiography technique to detect metabolically tritium labeled sphingolipids in intact cells in culture. To label cell sphingolipids, human fibroblasts in culture were fed by a 24 hours pulse, repeated 5 times, of 3 x 10(-7) M [1-(3)H]sphingosine. [1-(3)H]sphingosine was efficently taken up by the cells and very rapidly used for the biosynthesis of complex sphingolipids, including neutral glycolipids, gangliosides, ceramide and sphingomyelin. The treatment with [1-(3)H]sphingosine did not induce any morphological alteration of cell structures, and well preserved cells, plasma membranes, and intracellular organelles could be observed by microscopy. Ultrathin sections from metabolic radiolabeled cells were coated with autoradiographic emulsion. One to four weeks of exposition resulted in pictures where the location of radioactive sphingolipids was evidenced by the characteristic appearance of silver grains as irregular coiled ribbons of metallic silver. Radioactive sphingolipids were found at the level of the plasma membranes, on the endoplasmic reticulum and inside of cytoplasmic vesicles. Thus, electron microscopy autoradiography is a very useful technique to study sphingolipid-enriched membrane domain organization and biosynthesis.     

Surface topography of membrane domains

Elucidating origin, composition, size, and lifetime of microdomains in biological membranes remains a major issue for the understanding of cell biology. For lipid domains, the lack of a direct access to the behaviour of samples at the mesoscopic scale has constituted for long a major obstacle to their characterization, even in simple model systems made of immiscible binary mixtures. By its capacity to image soft surfaces with a resolution that extends from the molecular to the microscopic level, in air as well as under liquid, atomic force microscopy (AFM) has filled this gap and has become an inescapable tool in the study of the surface topography of model membrane domains, the first essential step for the understanding of biomembranes organization. In this review we mainly focus on the type of information on lipid microdomains in model systems that only AFM can provide. We will also examine how AFM can contribute to understand data acquired by a variety of other techniques and present recent developments which might open new avenues in model and biomembrane AFM applications.     

Biosynthesis and membrane topography of the neural cell adhesion molecule L1.

The biosynthesis and membrane topography of the neural cell adhesion molecule L1 have been studied in cerebellar cell cultures by metabolic labeling and immunoprecipitation. Pulse and pulse-chase experiments with [35S]methionine show that L1 is synthesized in its high mol. wt. form, the 200 kd component. The lower mol. wt. components with 40, 80 and 140 K apparent mol. wts. can be generated by proteolysis in intact cellular membranes. Peptide maps generated by protease treatment of L1 isolated from adult mouse brain show that the 80 and 140 kd components are related to the 200 kd component, but not to each other. The 200, 80 and 40 kd components can be biosynthetically phosphorylated. The 140 kd component is not phosphorylated and not released from the surface membrane during tryspinization. The phosphorylated amino acid is serine. In the presence of tunicamycin the 200 kd component is synthesized as a 150 kd protein. Pulse-chase experiments in the presence of tunicamycin indicate that the carbohydrate moieties are predominantly N-glycosidically linked and that the contribution of O-glycosylation is minimal. The carbohydrate moieties are of the complex type as shown by treatment with endoglycosidase H. Since monensin inhibits processing of the carbohydrate moieties, the 200 kd component appears to be transported to the surface membrane via the Golgi apparatus.     

Optical techniques for imaging membrane topography

In recent years three powerful optical imaging techniques have emerged that provide nanometer-scale information about the topography of membrane surfaces, whether cellular or artificial: intermembrane fluorescence resonance energy transfer (FRET), fluorescence interference contrast microscopy (FLIC), and reflection interference contrast microscopy (RICM). In intermembrane FRET, the sharp distance dependence of resonant energy transfer between fluorophores allows topographic measurements in the Angstrom to few-nanometer range. In FLIC and RICM, interference between light from a membrane (either from fluorescent probes, or reflected illumination) and light reflected by a planar substrate provide spatial sensitivity in the few to hundreds of nanometer range, with few-nanometer resolution. All of these techniques are fairly easy to implement. We discuss the physics and optics behind each of these tools, as well as practical concerns regarding their uses. We also provide examples of their application in imaging molecular-scale structures at intermembrane junctions.     

Differences in the spatial structure of an envelope protein from tobacco mosaic virus and its mutant, detected by tritium planigraphy]

Mutant ts21-66 of the tobacco mosaic virus (TMV) differs from the wild-type TMV-U1 by two mutations (Ile-21-->Thr and Asp-66-->Gly) in the coat protein (CP) gene and in symptoms produced in infected N' plants. The CP structure in TMV-U1 and ts21-66 virions was probed by tritium planigraphy. Compared with the wild-type CP, labeling of the N-terminal region of mutant CP was half as high and suggested its greater shielding. A role of this CP region in virus interactions with the N' resistance system is discussed.     

Cell surface topography controls phagocytosis and cell spreading: The membrane reservoir in neutrophils

Neutrophils exhibit rapid cell spreading and phagocytosis, both requiring a large apparent increase in the cell surface area. The wrinkled surface topography of these cells may provide the membrane reservoir for this. Here, the effects of manipulation of the neutrophil cell surface topography on phagocytosis and cell spreading were established. Chemical expansion of the plasma membrane or osmotic swelling had no effects. However, osmotic shrinking of neutrophils inhibited both cell spreading and phagocytosis. Triggering a Ca²⁺ signal in osmotically shrunk cells (by IP₃ uncaging) evoked tubular blebs instead of full cell spreading. Phagocytosis was halted at the phagocytic cup stage by osmotic shrinking induced after the phagocytic Ca²⁺ signalling. Restoration of isotonicity was able to restore complete phagocytosis. These data thus provide evidence that the wrinkled neutrophil surface topography provides the membrane reservoir to increase the available cell surface area for phagocytosis and spreading by neutrophils.     

New cell fusion method using polymer membrane

A porous polymer membrane of nitrocellulose or tetrafluoroethylene (TFE) was employed for fusion of Saccharomyces cerevisiae (AH22 and D13-1A) protoplasts. Protoplasts were adsorbed on the membrane with slight suction. Some part of the protoplasts was trapped in pores of the membrane as observed by electron microscopy. The membrane retaining protoplasts was placed on a selective medium. Several colonies appeared on the medium after 5-7 days incubation at 30 degrees C. The fusion of the two strains was ascertained by DNA content and genetic markers. Fusion frequency was 1.2 X 10(-6) in the case of the TFE membrane.