Development of a continuous cell-recycle fermentation system for production of lactic acid by Lactobacillus paracasei

Experimental devices for stimulating productivity of lactic acid fermentation were installed and an electromagnetic flow-meter and a pneumatic diaphragm pump were employed to alleviate the fouling of the membrane and to improve the durability of membrane cell-recycle bioreactors (MCRBs). In this case, the continuous fermentation using a 5 L automatic fermentor lasted stably over 150 h, and could repeat periodically with simple intermittent on-line cleaning and sterilization of the membrane filtration system. Maximum value of OD₆₂₀ of 98.7 was obtained, six times greater than that of the fed-batch fermentation. Meanwhile, maximum productivity of 31.5 g/(L h) was recorded, 10 times greater than that occurred in the fed-batch fermentation. Compared with conventional MCRBs, the MCRB system with a diaphragm pump and tangential flow-rate controlling was more stable and durable. The tangential velocity of membrane module could be monitored and controlled on-line, and the possibility of contamination due to hose rupture could be eliminated.     

Production of L(+)-lactic acid from glucose and starch by immobilized cells of Rhizopus oryzae in a rotating fibrous bed bioreactor

A rotating fibrous-bed bioreactor (RFB) was developed for fermentation to produce L(+)-lactic acid from glucose and cornstarch by Rhizopus oryzae. Fungal mycelia were immobilized on cotton cloth in the RFB for a prolonged period to study the fermentation kinetics and process stability. The pH and dissolved oxygen concentration (DO) were found to have significant effects on lactic acid productivity and yield, with pH 6 and 90% DO being the optimal conditions. A high lactic acid yield of 90% (w/w) and productivity of 2.5 g/L.h (467 g/h.m(2)) was obtained from glucose in fed-batch fermentation. When cornstarch was used as the substrate, the lactic acid yield was close to 100% (w/w) and the productivity was 1.65 g/L.h (300 g/h.m(2)). The highest concentration of lactic acid achieved in these fed-batch fermentations was 127 g/L. The immobilized-cells fermentation in the RFB gave a virtually cell-free fermentation broth and provided many advantages over conventional fermentation processes, especially those with freely suspended fungal cells. Without immobilization with the cotton cloth, mycelia grew everywhere in the fermentor and caused serious problems in reactor control and operation and consequently the fermentation was poor in lactic acid production. Oxygen transfer in the RFB was also studied and the volumetric oxygen transfer coefficients under various aeration and agitation conditions were determined and then used to estimate the oxygen transfer rate and uptake rate during the fermentation. The results showed that the oxygen uptake rate increased with increasing DO, indicating that oxygen transfer was limited by the diffusion inside the mycelial layer.     

Production of mannitol and lactic acid by fermentation with Lactobacillus intermedius NRRL B-3693

Lactobacillus intermedius B-3693 was selected as a good producer of mannitol from fructose after screening 72 bacterial strains. The bacterium produced mannitol, lactic acid, and acetic acid from fructose in pH-controlled batch fermentation. Typical yields of mannitol, lactic acid, and acetic acid from 250 g/L fructose were 0.70, 0.16, and 0.12 g, respectively per g of fructose. The fermentation time was greatly dependent on fructose concentration but the product yields were not dependent on fructose level. Fed-batch fermentation decreased the time of maximum mannitol production from fructose (300 g/L) from 136 to 92 h. One-third of fructose could be replaced with glucose, maltose, galactose, mannose, raffinose, or starch with glucoamylase (simultaneous saccharification and fermentation), and two-thirds of fructose could be replaced with sucrose. L. intermedius B-3693 did not co-utilize lactose, cellobiose, glycerol, or xylose with fructose. It produced lactic acid and ethanol but no acetic acid from glucose. The bacterium produced 21.3 +/- 0.6 g lactic acid, 10.5 +/- 0.3 g acetic acid, and 4.7 +/- 0.0 g ethanol per L of fermentation broth from dilute acid (15% solids, 0.5% H(2)SO(4), 121 degrees C, 1 h) pretreated enzyme (cellulase, beta-glucosidase) saccharified corn fiber hydrolyzate.     

Mannitol production by Leuconostoc citreum KACC 91348P isolated from Kimchi

Leuconostoc genus, which comprise heterofermentative lactic acid bacteria, reduces fructose to mannitol by recycling intracellular NADH. To evaluate the mannitol productivities of different Leuconostoc species, 5 stock cultures and 4 newly isolated strains were cultivated in MRS and simplified media containing glucose and fructose (1:2 ratio). Among them, L. citreum KACC 91348P, which was isolated from kimchi, showed superior result in cell growth rate, mannitol production rate, and yield in both media. The optimal condition for mannitol production of this strain was pH 6.5 and 30°C. When L. citreum KACC was cultured in simplified medium in a 2 l batch fermenter under optimal conditions, the maximum volumetric productivity was 14.83 g·l(-1)h(-1) and overall yield was 86.6%. This strain is a novel and efficient mannitol producer originated from foods to be used for fermentation of fructose-containing foods.     

Multi-stage high cell continuous fermentation for high productivity and titer

We carried out the first simulation on multi-stage continuous high cell density culture (MSC-HCDC) to show that the MSC-HCDC can achieve batch/fed-batch product titer with much higher productivity to the fed-batch productivity using published fermentation kinetics of lactic acid, penicillin and ethanol. The system under consideration consists of n-serially connected continuous stirred-tank reactors (CSTRs) with either hollow fiber cell recycling or cell immobilization for high cell-density culture. In each CSTR substrate supply and product removal are possible. Penicillin production is severely limited by glucose metabolite repression that requires multi-CSTR glucose feeding. An 8-stage C-HCDC lactic acid fermentation resulted in 212.9 g/L of titer and 10.6 g/L/h of productivity, corresponding to 101 and 429% of the comparable lactic acid fed-batch, respectively. The penicillin production model predicted 149% (0.085 g/L/h) of productivity in 8-stage C-HCDC with 40 g/L of cell density and 289% of productivity (0.165 g/L/h) in 7-stage C-HCDC with 60 g/L of cell density compared with referring batch cultivations. A 2-stage C-HCDC ethanol experimental run showed 107% titer and 257% productivity of the batch system having 88.8 g/L of titer and 3.7 g/L/h of productivity. MSC-HCDC can give much higher productivity than batch/fed-batch system, and yield a several percentage higher titer as well. The productivity ratio of MSC-HCDC over batch/fed-batch system is given as a multiplication of system dilution rate of MSC-HCDC and cycle time of batch/fed-batch system. We suggest MSC-HCDC as a new production platform for various fermentation products including monoclonal antibody.     

一株法夫酵母虾青素高产菌株的生产性能

为了评价虾青素高产菌株-法夫酵母JMU-MVP14的生产性能及建立虾青素高产发酵技术,通过测定糖、生物量、虾青素产量、总类胡萝卜素产量等发酵参数,用摇瓶试验对比了法夫酵母JMU-MVP14和出发菌株的差异,用7 L罐试验对比了pH值调控方式及补料培养基成分对发酵的影响,用1 m3罐试验评估了法夫酵母JMU-MVP14高密度发酵虾青素的产量水平。摇瓶发酵结果表明,法夫酵母JMU-MVP14虾青素及总类胡萝卜素的细胞产率分别达到6.01 mg/g及10.38 mg/g;7 L罐分批发酵试验结果表明,自动流加调     

Repeated fed-batch fermentation using biosensor online control for citric acid production by Yarrowia lipolytica

Biosensor-controlled substrate feeding was used in a citric acid production process with the yeast strain Yarrowia lipolytica H222 with glucose as the carbon source. The application of an online glucose biosensor measurement facilitated the performance of long-time repeated fed-batch process with automated bioprocess control. Ten cycles of repeated fed-batch fermentation were carried out in order to validate both the stability of the microorganism for citric acid production and the robustness of the glucose biosensor in a long-time experiment. In the course of this fermentation with a duration of 553 h, a slight loss of productivity from 1.4 g/(L×h) to 1.1 g/(L×h) and of selectivity for citric acid from 91% to 88% was observed. The glucose biosensor provided 6,227 measurements without any loss of activity.     

丙酸絮凝发酵新工艺研究

报道了丙酸发酵的一种新工艺:絮凝发酵工艺。采用谢氏丙酸杆菌(Propionibacterium shermanii)W125在批次发酵产酸达到29g/L的基础上,选择氢氧化钙作为中和剂兼絮凝剂,建立了絮凝半连续发酵工艺,连续运行250h,产酸量达到了35.4g/L,产酸率提高了22%,糖酸转化率达到了51.56%,体积效率达到了0.37g/(L/h)。     

Influence of incubation temperature and time on resistant starch type III formation from autoclaved and acid-hydrolysed cassava starch

Raw cassava starch, having 74.94 and 0.44 g/100 g resistant starch type II and III (RS II and RS III), respectively, was autoclaved at 121 °C in water, 1, 10 or 100 mmol/L lactic acid. The formation of RS III was evaluated in relation to variable incubation temperature (−20 to 100 °C), incubation time (6–48 h) and autoclaving time (15–90 min). Negligible to low quantities of RS III (0.59–2.42 g/100 g) were formed from autoclaved starch suspended in 100 mmol/L lactic acid, whereas intermediate to high quantities (2.68–9.97 g/100 g) were formed from autoclaved starch suspended in water, 1 or 10 mmol/L lactic acid, except for treatments with water or 10 mmol/L lactic acid incubated at 100 °C for 6 h (1.74 g/100 g). Autoclaving times corresponding to maximum RS III contents were 15 and 45 min for water and 10 mmol/L lactic acid, respectively. Whereas, the RS III fractions from cassava starch suspended in water had melt transitions between 158 and 175 °C with low endothermic enthalpies (0.2–1.6 J/g), the thermal transitions of the acid treated samples were indistinct.     

Ethanol from lignocellulosic materials by a simultaneous saccharification and fermentation process (SFS) with Kluyveromyces marxianus CECT 10875

Simultaneous saccharification and fermentation (SSF) process for ethanol production from various lignocellulosic woody (poplar and eucalyptus) and herbaceous (Sorghum sp. bagasse, wheat straw and Brassica carinata residue) materials has been assayed using the thermotolerant yeast strain Kluyveromyces marxianus CECT 10875. Biomass samples were previously treated in a steam explosion pilot plant to provide pretreated biomass with increased cellulose content relative to untreated materials and to enhance cellulase accessibility. SSF experiments were performed in laboratory conditions at 42 °C, 10% (w/v) substrate concentration and 15 FPU/g substrate of commercial cellulase. The results indicate that it is possible to reach SSF yields in the range of 50–72% of the maximum theoretical SSF yield, based on the glucose available in pretreated materials, in 72–82 h. Maximum ethanol contents from 16 to 19 g/l were obtained in fermentation media, depending on the material tested.     

Utilization of by-products derived from bioethanol production process for cost-effective production of lactic acid

The by-products of bioethanol production such as thin stillage (TS) and condensed distillers solubles (CDS) were used as a potential nitrogen source for economical production of lactic acid. The effect of those by-products and their concentrations on lactic acid fermentation were investigated using Lactobacillus paracasei CHB2121. Approximately, 6.7 g/L of yeast extract at a carbon source to nitrogen source ratio of 15 was required to produce 90 g/L of lactic acid in the medium containing 100 g/L of glucose. Batch fermentation of TS medium resulted in 90 g/L of lactic acid after 48 h, and the medium containing 10 % CDS resulted in 95 g/L of lactic acid after 44 h. Therefore, TS and CDS could be considered as potential alternative fermentation medium for the economical production of lactic acid. Furthermore, lactic acid fermentation was performed using only cassava and CDS for commercial production of lactic acid. The volumetric productivity of lactic acid [2.94 g/(L·h)] was 37 % higher than the productivity obtained from the medium with glucose and CDS.     

Fed-batch sorbose fermentation using pulse and multiple feeding strategies for productivity improvement

Microbial oxidation of D-sorbitol tol-sorbose byAcetobacter suboxydans is of commercial importance since it is the only biochemical process in vitamin C synthesis. The main bottleneck in the batch oxidation of sorbitol to sorbose is that the process is severely inhibited by sorbitol. Suitable fed-batch fermentation designs can eliminate the inherent substrate inhibition and improve sorbose productivity. Fed-batch sorbose fermentations were conducted by using two nutrient feeding strategies. For fed-batch fermentation with pulse feeding highly concentrated sorbitol (600 g/L) along with other nutrients were fed intermittently in four pulses of 0.5 liter in response to the increased DO signal. The fed-batch fermentation was over in 24 h with a sorbose productivity of 13.40 g/L/h and a final sorbose concentration of 320.48 g/L. On the other hand, in fed-batch fermentation with multiple feeds, two pulse feeds of 0.5 liter nutrient medium containing 600 g/L sorbitol was followed by the addition of 1.5 liter nutrient medium containing 600 g/L sorbitol at a constant feed rate of 0.36 L/h till the full working capacity of the reactor. The fermentation was completed in 24 h with an enhanced sorbose productivity of 15.09 g/L/h and a sorbose concentration of 332.60 g/L. The sorbose concentration and productivity obtained by multiple feeding of nutrients was found to be higher than that obtained by pulse feeding and was therefore a better strategy for fed-batch sorbose fermentation.     

Production of succinic acid and lactic acid by Corynebacterium crenatum under anaerobic conditions

A new succinic acid and lactic acid production bioprocess by Corynebacterium crenatum was investigated in mineral medium under anaerobic conditions. Corynebacterium crenatum cells with sustained acid production ability and high acid volumetric productivity harvested from the glutamic acid fermentation broth were used to produce succinic acid and lactic acid. Compared with the first cycle, succinic acid production in the third cycle increased 120% and reached 43.4 g/L in 10 h during cell-recycling repeated fermentations. The volumetric productivities of succinic acid and lactic acid could maintain above 4.2 g/(L·h) and 3.1 g/(L·h), respectively, for at least 100 h. Moreover, wheat bran hydrolysates could be used for succinic acid and lactic acid production by the recycled C. crenatum cells. The final succinic acid concentration reached 43.6 g/L with a volumetric productivity of 4.36 g/(L·h); at the same time, 32 g/L lactic acid was produced.     

Effects of pH and corn steep liquor variability on mannitol production by Lactobacillus intermedius NRRL B-3693

Lactobacillus intermedius NRRL B-3693 produced mannitol, lactic acid, and acetic acid when grown on fructose at 37°C. The optimal pH for mannitol production from fructose by the heterofermentative lactic acid bacterium (LAB) in pH-controlled fermentation was at pH 5.0. It produced 160.7 ± 1.1 g mannitol in 40 h with a volumetric productivity of 4.0 g l⁻¹ h⁻¹ in a simplified medium containing 250 g fructose, 50 g corn steep liquor (CSL), and 33 mg MnSO₄ per liter. However, the mannitol production by the LAB was severely affected by the variability of CSL. The supplementation of CSL with soy peptone (5 g/l), tryptophan (50 mg/l), tryptophan (50 mg/l) plus tyrosine (50 mg/l), or commercial protease preparation (2 ml/100 g of CSL) enhanced the performance of the inferior CSL and thus helped to overcome the nutrient limitations.     

Optimum conditions for the biological production of lactic acid by a newly isolated lactic acid bacterium,Lactobacillus sp. RKY2

Lactic acid is a green chemical that can be used as a raw material for biodegradable polymer. To produce lactic acid through microbial fermentation, we previously screened a novel lactic acid bacterium. In this work, we optimized lactic acid fermentation using a newly isolated and homofermentative lactic acid bacterium. The optimum medium components were found to be glucose, yeast extract, (NH₄)₂HPO₄, and MnSO₄. The optimum pH and temperature for a batch culture ofLactobacillus sp. RKY2 was found to be 6.0 and 36°C, respectively. Under the optimized culture conditions, the maximum lactic acid concentration (153.9 g/L) was obtained from 200 g/L of glucose and 15 g/L of yeast extract, and maximum lactic acid productivity (6.21 gL⁻¹h⁻¹) was obtained from 100 g/L of glucose and 20 g/L of yeast extract. In all cases, the lactic acid yields were found to be above 0.91 g/g. This article provides the optimized conditions for a batch culture ofLactobacillus sp. RKY2, which resulted in highest productivity of lactic acid.     

Enhanced 2,3-butanediol production in fed-batch cultures of free and immobilized Bacillus licheniformis DSM 8785

2,3-Butanediol (2,3-BD) is a valuable bulk chemical with particular use in industry. 2,3-BD has a potential as solvent and fuel additive, as carrier for pharmaceuticals, or as feedstock for the production of synthetic rubber. Until now, the highest 2,3-BD concentrations were obtained with risk group 2 microorganisms (e.g., Klebsiella oxytoca). In this study, the nonpathogenic bacterium Bacillus licheniformis DSM 8785 was used for 2,3-BD production from glucose. In batch experiments, a maximum 2,3-BD concentration of 72.6 g/L was reached from 180 g/L glucose after 86 h. The yield was 0.42 g/g glucose and the productivity was 0.86 g/(L h). During fed-batch cultivation, 2,3-BD production could be increased up to 144.7 g/L, with a productivity of 1.14 g/(L h). Additionally, repeated batch/fed-batch experiments were conducted using immobilized B. licheniformis in the form of LentiKats®. Results showed a high activity and stability of the immobilizates even after multiple medium replacements, as well as 2,3-BD concentrations, yields, and productivities similar to those obtained with free cells. To our knowledge, these results show the highest 2,3-BD concentration reported so far using a risk group 1 microorganism in general and B. licheniformis in particular. Furthermore, productivity lies in the same range with data reported from risk group 2 strains, which makes B. licheniformis DSM 8785 a suitable candidate for large-scale fermentation processes.     

赖氨酸流加发酵最优控制的研究

在赖氨酸发酵动力学模型和庞特里金明小值原理的基础上,得出流加发酵的最优化底物流加方式。并进一步对流加发酵的全过程进行了分析,得出了在实际控制中较为可行的流加发酵全过程的总控制策略,实际控制表明在小型反应器中赖氨酸产生菌FB42的发酵水平为81．6g／l。、转化率为0．418％、生产强度为1．16g／h·L,和分批发酵相比分别提高了45．4％、9．7％和28．4％。     

Ethanol production from glucose and xylose by separated and co-culture processes using high cell density systems

Media containing xylose and/or glucose were tested utilizing Zymomonas mobilis or Saccharomyces diastaticus and Pichia stipitis. The best fermentation results were obtained in separated glucose (180 g/litre) and xylose (80 g/litre) fermentations utilizing Zymomonas mobilis and Pichia stipitis strains, respectively. In these conditions, the maximum ethanol concentrations achieved were 86·2 g/litre and 29 g/litre, respectively. The complete conversion of a glucose and xylose mixture (50 g/litre) was obtained using a respiratory deficient mutant of Saccharomyces diastaticus co-cultivated with Pichia stipitis in continuous culture. Using the co-culture process, the maximum ethanol concentration was 21·5 g/litre (Yp/s=0·45 g/g) and the maximum volumetric ethanol productivity was 4·3 g/(litre × h).     

Improvement of mannitol production by Lactobacillus brevis mutant 3-A5 based on dual-stage pH control and fed-batch fermentations

Lactobacillus brevis 3-A5 was isolated and expected to produce mannitol efficiently by regulating pH in batch and fed-batch fermentations. In 48 h batch fermentations with free and constant pH, the optimal pH for cell growth and mannitol production in the first 24 h of incubation was 5.5, whereas that for mannitol production in the second 24 h of incubation was 4.5. To achieve high cell density and mannitol yield simultaneously, a dual-stage pH control strategy was proposed based on the kinetic analysis of mannitol production. The pH value was controlled at 5.5 for the first 12 h of fermentation and subsequently shifted to 4.5 until the fermentation was completed. Under dual-stage pH control fermentation, a 103 g/L yield of mannitol with a volumetric production rate of 3.7 g/L/h was achieved after 28 h. The dual-stage pH control fed-batch fermentation strategy was further developed to improve mannitol yield, wherein the yield increased by 109 % to 215 g/L after 98 h of fermentation. This value is the highest yield of mannitol ever reported using L. brevis.     

Study of the effects of temperature and pH on lactic acid production from fresh cassava roots in tofu liquid waste by Streptococcus bovis

We report a study of the effects of temperature and pH on the kinetics of lactic acid production from fresh cassava roots (FCR) by Streptococcus bovis in new media: tofu liquid waste (TLW); TLW with 2 wt% concentrated maguro waste (TLW + CMW2); and in a standard trypto-soya broth (TSB) compared with a standard medium (glucose in TSB). The results showed that 39 °C and pH 5.5 were optimal for fermentation properties (lactic acid concentration, productivity and specific growth rate) in all media, including the standard. The energy of activation (E_a) and the energy of deactivation (E_d) of lactic acid fermentation in all media were calculated using the Arrhenius relation. The E_a and E_d values increased in the order FCR in TLW < FCR in TLW + CMW2 < glucose in TSB < FCR in TSB, while values of productivity and specific growth rate decreased in the same order. The effects of pH on productivity and specific growth rate were evaluated by Michaelis–Menten and Monod-type equations. For pH, the inhibition is competitive for both productivity and specific growth rate. By controlling the pH at 5.80, the inhibition for both productivity and specific growth rate were minimized in all media.