Cyclic amplification and selection of targets (CASTing) for the myogenin consensus binding site.

The consensus binding site for the muscle regulatory factor myogenin was determined from an unbiased set of degenerate oligonucleotides using CASTing (cyclic amplification and selection of targets). Stretches of totally random sequence flanked by polymerase chain reaction priming sequences were mixed with purified myogenin or myotube nuclear extracts, DNA-protein complexes were immunoprecipitated with an antimyogenin antibody, and the DNA was amplified by polymerase chain reaction. Specific binding was obtained after four to six cycles of CASTing. The population of selected binding sites was then cloned, and a consensus was determined from sequencing individual isolates. Starting from a pool with 14 random bases, purified myogenin yielded a consensus binding site of AACAG[T/C]TGTT, while nuclear extracts retrieved the sequence TTGCACCTGTTNNTT from a pool containing 35 random bases. The latter sequence is consistent with that predicted from combining an E12/E47 half-site (N[not T]CAC) with the purified myogenin half-site ([T/C] TGTT). The presence of paired E boxes in many of the sequences isolated following CASTing with nuclear extracts proves that myogenin can bind cooperatively with other E-box-binding factors.     

Target Detection Assay (TDA): a versatile procedure to determine DNA binding sites as demonstrated on SP1 protein.

We developed a rapid method designated Target Detection Assay (TDA) to determine DNA binding sites for putative DNA binding proteins. A purified, functionally active DNA binding protein and a pool of random double-stranded oligonucleotides harbouring PCR primer sites at each end are included the TDA cycle which consists of four separate steps: a DNA protein incubation step, a protein DNA complex separation step, a DNA elution step and a polymerase chain reaction (PCR) DNA amplification step. The stringency of selection can be increased in consecutive TDA cycles. Since tiny amounts of retained DNA can be rescued by PCR, buffer systems, salt concentrations and competitor DNA contents can be varied in order to determine high affinity binding sites for the protein of choice. To test the efficiency of the TDA procedure potential DNA binding sites were selected by the DNA binding protein SP1 from a pool of oligonucleotides with random nucleotides at 12 positions. Target sites selected by recombinant SP1 closely matched the SP1 consensus site. If DNA recognition sites have to be determined for known, mutated or putative DNA binding proteins, the Target Detection Assay (TDA) is a versatile and rapid technique for consideration.     

Multiple displacement amplification as a pre-polymerase chain reaction (pre-PCR) to process difficult to amplify samples and low copy number sequences from natural environments

Microbial assessment of natural biodiversity is usually achieved through polymerase chain reaction (PCR) amplification. Deoxyribonucleic acid (DNA) sequences from natural samples are often difficult to amplify because of the presence of PCR inhibitors or to the low number of copies of specific sequences. In this study, we propose a non-specific preamplification procedure to overcome the presence of inhibitors and to increase the number of copies prior to carrying out standard amplification by PCR. The pre-PCR step is carried out through a multiple displacement amplification (MDA) technique using random hexamers as priming oligonucleotides and phi 29 DNA polymerase in an isothermal, whole-genome amplification reaction. Polymerase chain reaction amplification using specific priming oligonucleotides allows the selection of the sequences of interest after a preamplification reaction from complex environmental samples. The procedure (MDA-PCR) has been tested on a natural microbial community from a hypogean environment and laboratory assemblages of known bacterial species, in both cases targeting the small subunit ribosomal RNA gene sequences. Results from the natural community showed successful amplifications using the two steps protocol proposed in this study while standard, direct PCR amplification resulted in no amplification product. Amplifications from a laboratory assemblage by the two-step proposed protocol were successful at bacterial concentrations >or= 10-fold lower than standard PCR. Amplifications carried out in the presence of different concentrations of fulvic acids (a soil humic fraction) by the MDA-PCR protocol generated PCR products at concentrations of fulvic acids over 10-fold higher than standard PCR amplifications. The proposed procedure (MDA-PCR) opens the possibility of detecting sequences represented at very low copy numbers, to work with minute samples, as well as to reduce the negative effects on PCR amplifications of some inhibitory substances commonly found in environmental samples.     

A consensus DNA-binding site for the androgen receptor.

We have used a DNA-binding site selection assay to determine a consensus binding sequence for the androgen receptor (AR). A purified fusion protein containing the AR DNA-binding domain was incubated with a pool of random sequence oligonucleotides, and complexes were isolated by gel mobility shift assays. Individually selected sites were characterised by nucleotide sequencing and compiled to give a consensus AR-binding element. This sequence is comprised of two 6-basepair (bp) asymmetrical elements separated by a 3-bp spacer, 5'-GGA/TACANNNTGTTCT-3', similar to that described for the glucocorticoid response element. Inspection of the consensus revealed a slight preference for G or A nucleotides at the +1 position in the spacer and for A and T nucleotides in the 3'-flanking region. Therefore, a series of oligonucleotides was designed in which the spacer and flanking nucleotides were changed to the least preferred sequence. Competition experiments with these oligonucleotides and the AR fusion protein indicated that an oligonucleotide with both the spacer and flanking sequences changed had greater than 3-fold less affinity than the consensus sequence. The functional activity of these oligonucleotides was also assessed by placing them up-stream of a reporter gene in a transient transfection assay and correlated with the affinity with which the AR fusion protein bound to DNA. Therefore, sequences surrounding the two 6-bp half-sites influence both the binding affinity for the receptor and the functional activity of the response element.     

DNA recognition and binding by the Euplotes telomere protein.

The 51-kDa telomere protein from Euplotes crassus binds to the extreme terminus of macronuclear telomeres, generating a very salt-stable telomeric DNA-protein complex. The protein recognizes both the sequence and the structure of the telomeric DNA. To explore how the telomere protein recognizes and binds telomeric DNA, we have examined the DNA-binding specificity of the purified protein using oligonucleotides that mimic natural and mutant versions of Euplotes telomeres. The protein binds very specifically to the 3' terminus of single-stranded oligonucleotides with the sequence (T4G4) > or = 3 T4G2; even slight modifications to this sequence reduce binding dramatically. The protein does not bind oligonucleotides corresponding to the complementary C4A4 strand of the telomere or to double-stranded C4A4.T4G4-containing sequences. Digestion of the telomere protein with trypsin generates an N-terminal protease-resistant fragment of approximately 35 kDa. This 35-kDa peptide appears to comprise the DNA-binding domain of the telomere protein as it retains most of the DNA-binding characteristics of the native 51-kDa protein. For example, the 35-kDa peptide remains bound to telomeric DNA in 2 M KCl. Additionally, the peptide binds well to single-stranded oligonucleotides that have the same sequence as the T4G4 strand of native telomeres but binds very poorly to mutant telomeric DNA sequences and double-stranded telomeric DNA. Removal of the C-terminal 15 kDa from the telomere protein does diminish the ability of the protein to bind only to the terminus of a telomeric DNA molecule.     

In vitro selection and characterization of Bcl-X(L)-binding proteins from a mix of tissue-specific mRNA display libraries

The covalent coupling of an mRNA to the protein that it encodes (mRNA display) provides a powerful tool for analysis of protein function in the post-genomic era. This coupling allows the selective enrichment of individual members from libraries of displayed proteins and the subsequent regeneration of an enriched library using the RNA moiety. Tissue-specific libraries from poly(A)(+) mRNA were prepared by priming first and second strand cDNA synthesis with oligonucleotides containing nine random 3' nucleotides, the fixed regions of which encoded the requisite sequences for formation of mRNA display constructs and a library-specific sequence tag. Starting with a pool of uniquely tagged libraries from different tissues, an iterative selection was performed for binding partners of the anti-apoptotic protein Bcl-X(L). After four rounds of selection, the pool was deconvoluted by polymerase chain reaction amplification with library-specific primers. Subsequent clonal sequence analysis revealed the selection of three members of the Bcl-2 family known to bind to Bcl-X(L). In addition, several proteins not previously demonstrated to interact with Bcl-X(L) were identified. The relative binding affinities of individual selected peptides were determined, as was their susceptibility to competition with a BH3 domain peptide. Based on these data, a putative BH3 domain was identified in most peptides.     

Enhancing PCR amplification and sequencing using DNA-binding proteins

The polymerase chain reaction (PCR) is a powerful core molecular biology technique, which when coupled to chain termination sequencing allows gene and DNA sequence information to be derived rapidly. A number of modifications to the basic PCR format have been developed in an attempt to increase amplification efficiency and the specificity of the reaction. We have applied the use of DNA-binding protein, gene 32 protein from bacteriophage T4 (T4gp32) to increase amplification efficiency with a number of diverse templates. In addition, we have found that using single-stranded DNA-binding protein (SSB) or recA protein in DNA sequencing reactions dramatically increases the resolution of sequencing runs. The use of DNA-binding proteins in amplification and sequencing may prove to be generally applicable in improving the yield and quality of a number of templates from various sources.     

Recognition sequence of a highly conserved DNA binding protein RBP-J kappa.

DNA binding specificity of the RBP-J kappa protein was extensively examined. The mouse RBP-J kappa protein was originally isolated as a nuclear protein binding to the J kappa type V(D)J recombination signal sequence which consisted of the conserved heptamer (CACTGTG) and nonamer (GGTTTTTGT) sequences separated by a 23-base pair spacer. Electrophoretic mobility shift assay using DNA probes with mutations in various parts of the J kappa recombination signal sequence showed that the RBP-J kappa protein recognized the sequence outside the recombination signal in addition to the heptamer but did not recognize the nonamer sequence and the spacer length at all. Database search identified the best naturally occurring binding motif (CACTGTGGGAACGG) for the RBP-J kappa protein in the promoter region of the m8 gene in the Enhancer of split gene cluster of Drosophila. The binding assay with a series of m8 motif mutants indicated that the protein recognized mostly the GTGGGAA sequence and also interacted weakly with ACT and CG sequences flanking this hepta-nucleotide. Oligonucleotides binding to the RBP-J kappa protein were enriched from a pool of synthetic oligonucleotides containing 20-base random sequences by the repeated electrophoretic mobility shift assay. The enriched oligomer shared a common sequence of CGTGGGAA. All these data indicate that the RBP-J kappa protein recognizes a unique core sequence of CGTGGGAA and does not bind to the V(D)J recombination signal without the flanking sequence.     

Properties of a DNA-binding protein in a culture medium of thymus cells

A DNA-binding protein, which migrated as one major protein band, with a molecular weight of 14,000, on sodium dodecylsulfate polyacrylamide gel, was purified from a culture medium of mouse thymus cells. The interaction of the isolated protein with DNA in vitro was assayed by a nitrocellulose filter binding technique. Equilibrium competition experiments demonstrated that the DNA-binding protein had the ability to differentiate among sequences of polynucleotides, indicating that the DNA-binding protein-DNA interaction was at least partially specific. This protein increased the helix melting temperature of DNA and inhibited the incorporation of [3H]dTMP into DNA by the DNA polymerase of calf thymus in vitro.     

The GLI gene encodes a nuclear protein which binds specific sequences in the human genome.

The GLI gene is amplified in a subset of human tumors and encodes a protein product with five zinc finger DNA-binding motifs. In this study, we show that the GLI gene product has a predominantly nuclear localization and binds DNA in a sequence-specific fashion. Three GLI binding sites were identified by using a novel procedure in which total human DNA was bound to a GLI recombinant fusion protein, and the polymerase chain reaction was used to amplify and recover the bound sequences. The GLI protein protected a 23- to 24-base region within all three binding sites, and the protected region in each case included the 9-base-pair sequence 5'-GACCACCCA-3'. One of the binding sites was contained within a 63-base-pair repeat of the variable number of tandem repeat type, whereas the other two sites were represented once in the genome. The approach used here to identify GLI binding sites should be applicable to the characterization of other zinc finger proteins.     

DNA binding activities of c-Myc purified from eukaryotic cells.

c-Myc is a nuclear phosphoprotein which contains both a leucine zipper and a helix-loop-helix dimerization motif. These are adjacent to a basic region believed to make specific contacts with DNA upon dimerization. We report the purification of full-length c-Myc to near homogeneity from two independent eukaryotic systems: the baculovirus overexpression system using an insect cell host, and Chinese hamster ovary cells containing heat-inducible c-myc genes. The DNA binding capabilities of these preparations were characterized. Both preparations contain two distinct activities that bind specifically to sequences with a core of CACGTG. The Myc protein is solely responsible for one of these binding activities. Specific sequences that bound to c-Myc were selected from a large pool of random DNA sequence. Sequencing of individual binding sites selected by this procedure yielded a 12-base consensus, PuACCACGTGCTC, for c-Myc binding. Both protein preparations additionally demonstrated a distinct complex, containing both c-Myc and a copurifying 26-29-kDa protein, that bound to DNA with higher affinity than Myc alone. Selection of specific DNA sequences by this complex revealed a consensus binding site similar to the 12-base consensus described above. These data demonstrate that c-Myc isolated from eukaryotic cells is capable of sequence-specific DNA binding and further refine the optimal sequence for c-Myc binding. These protein preparations should prove useful in further characterizing the biochemical properties of c-Myc.     

A new approach for the detection of DNA sequences in amplified nucleic acids by a surface plasmon resonance biosensor

In this paper, a simple and useful approach for DNA sensing based on surface plasmon resonance (SPR) transduction is reported. A new DNA sample pre-treatment has been optimised to allow fast and simple detection of hybridisation reaction between a target sequence in solution and a probe immobilised on the sensing surface. This pre-treatment consisted in a denaturation procedure of double stranded DNA containing the target sequence and was based on an high temperature treatment (95 degrees C, 5 min) followed by a 1 min incubation with small oligonucleotides. The oligonucleotides are designed to prevent the re-hybridising of the denatured strands, while enabling the target sequence to bind the immobilised probe. The important parameters of the procedure, i.e. incubation time, length and concentration of the oligonucleotides, have been studied in detail. The optimised DNA denaturation procedure has been successfully applied to the detection of amplified DNA with a commercially available SPR biosensor (Biacore X). DNA samples extracted from plant and human blood were tested after amplification by polymerase chain reaction (PCR).