Genetically Engineered Yeast Expressing a Lytic Peptide from Bee Venom (Melittin) Kills Symbiotic Protozoa in the Gut of Formosan Subterranean Termites

The Formosan subterranean termite, Coptotermes formosanus Shiraki, is a costly invasive urban pest in warm and humid regions around the world. Feeding workers of the Formosan subterranean termite genetically engineered yeast strains that express synthetic protozoacidal lytic peptides has been shown to kill the cellulose digesting termite gut protozoa, which results in death of the termite colony. In this study, we tested if Melittin, a natural lytic peptide from bee venom, could be delivered into the termite gut via genetically engineered yeast and if the expressed Melittin killed termites via lysis of symbiotic protozoa in the gut of termite workers and/or destruction of the gut tissue itself. Melittin expressing yeast did kill protozoa in the termite gut within 56 days of exposure. The expressed Melittin weakened the gut but did not add a synergistic effect to the protozoacidal action by gut necrosis. While Melittin could be applied for termite control via killing the cellulose-digesting protozoa in the termite gut, it is unlikely to be useful as a standalone product to control insects that do not rely on symbiotic protozoa for survival.     

Structural Determinants for the Interaction of Formyl Peptide Receptor 2 with Peptide Ligands

Unlike formyl peptide receptor 1 (FPR1), FPR2/ALX (FPR2) interacts with peptides of diverse sequences but has low affinity for the Escherichia coli-derived chemotactic peptide fMet-Leu-Phe (fMLF). Using computer modeling and site-directed mutagenesis, we investigated the structural requirements for FPR2 to interact with formyl peptides of different length and composition. In calcium flux assay, the N-formyl group of these peptides is necessary for activation of both FPR2 and FPR1, whereas the composition of the C-terminal amino acids appears more important for FPR2 than FPR1. FPR2 interacts better with pentapeptides (fMLFII, fMLFIK) than tetrapeptides (fMLFK, fMLFW) and tripeptide (fMLF) but only weakly with peptides carrying negative charges at the C terminus (e.g. fMLFE). In contrast, FPR1 is less sensitive to negative charges at the C terminus. A CXCR4-based homology model of FPR1 and FPR2 suggested that Asp-281^7.32 is crucial for the interaction of FPR2 with certain formyl peptides as its negative charge may be repulsive with the terminal COO- group of fMLF and negatively charged Glu in fMLFE. Asp-281^7.32 might also form a stable interaction with the positively charged Lys in fMLFK. Site-directed mutagenesis was performed to remove the negative charge at position 281 in FPR2. The D281^7.32G mutant showed improved affinity for fMLFE and fMLF and reduced affinity for fMLFK compared with wild type FPR2. These results indicate that different structural determinants are used by FPR1 and FPR2 to interact with formyl peptides.     

Interaction of Influenza Virus Fusion Peptide with Lipid Membranes: Effect of Lysolipid

The effect of lysophosphatidylcholine (LPC) on lipid vesicle fusion and leakage induced by influenza virus fusion peptides and the peptide interaction with lipid membranes were studied by using fluorescence spectroscopy and monolayer surface tension measurements. It was confirmed that the wild-type fusion peptide-induced vesicle fusion rate increased several-fold between pH 7 and 5, unlike a mutated peptide, in which valine residues were substituted for glutamic acid residues at positions 11 and 15. This mutated peptide exhibited a much greater ability to induce lipid vesicle fusion and leakage but in a less pH-dependent manner compared to the wild-type fusion peptide. The peptide-induced vesicle fusion and leakage were well correlated with the degree of interaction of these peptides with lipid membranes, as deduced from the rotational correlation time obtained for the peptide tryptophan fluorescence. Both vesicle fusion and leakage induced by the peptides were suppressed by LPC incorporated into lipid vesicle membranes in a concentration-dependent manner. The rotational correlation time associated with the peptide’s tryptophan residue, which interacts with lipid membranes containing up to 25 mole % LPC, was virtually the same compared to lipid membranes without LPC, indicating that LPC-incorporated membrane did not affect the peptide interaction with the membrane. The adsorption of peptide onto a lipid monolayer also showed that the presence of LPC did not affect peptide adsorption.     

Fusion Peptide Interaction with Lipid Bilayer: Modeling with Monte Carlo Simulation and Continuum Electrostatics Calculation

Abstract

Conformation of 20-residue peptide E5, an analog of the fusion peptide of influenza virus hemagglutinin, was explored by Monte-Carlo technique starting with the fully buried in the membrane ideal α-helix. The lipid bilayer (of 30 Å width) together with surrounding water were modeled by the atomic solvation parameters. During the simulation, residues 2–18 of the peptide retained α-helical conformation, and the peptide was found to be partially immersed into the bilayer. In the resulting low-energy conformers, the N-terminus was buried inside the membrane, its position with respect to the bilayer surface (Z_NT) being varied from 2.5 to 7.5 Å, and the orientation of the helical axis relative to the membrane plane (Θ) – from 10 to 35°. The low-energy conformers (below -200kcal/mol) were clustered in the space (Z_NT, Θ) into 4 groups. To select low-energy states of the peptide compatible with NMR data, we calculated pKa values of E5 ionizable groups and compared them with the experimental values. It was shown that the best correlation coefficient (0.87) and rmsd (0.68 in pH units) were obtained for the group of states which is characterized by Θ = 15–19° and Z_NT = 3.5–4.5Å.     

Stereochemical Analysis of Interaction of Signal Peptide with Phospholipids at the Initiation of Protein Translocation Across the Membrane

Abstract

Stereochemical analysis of signal peptide interaction with E. coli membrane phospholipids revealed the structural complementarity of N-terminus of signal peptide α-helix and acid phospholipids. The formation of their complex leads to neutralization of charges and decrease in hydrophilicity of both components, and promotes insertion of peptide and phospholipid into the membrane, not separately but as a complex. Interaction of acid phospholipids with the E. coli alkaline phosphatase (AP) signal peptide was thoroughly analyzed, and it was shown that in this case a complex of signal peptide α-helix with phosphatidylglycerol is inserted into the membrane with the lowest energy expense. On the basis of the results of stereochemical analysis and the available experimental data, a molecular mechanism of protein translocation initiation across the membrane has been proposed, in which the key events are the formation of the complex “signal peptide α-helix-acid phospholipid”, the coupled insertion of hydrophobic peptide-lipid complex into a nonpolar membrane interior and translocation across the membranes.     

蜂毒肽片段的合成及其与钙调蛋白的相互作用

采用固相法设计合成了４个蜂毒肽片段：Ｍｅｌ１２、Ｍｅ１１３、Ｍｅｌ１４、Ｍｅｌ１５。应用电泳技术,抑制钙依赖性的磷酸二酯酶酶活方法和荧光技术研究了这些多肽与钙调蛋白的相互作用。结果表明这些多肽与钙调蛋白均形成１：１复合物,抑制钙依赖性的磷酸二酯酶的活性,其中Ｍｅｌ１４和Ｍｅｌ１５对钙调蛋白的结合活性与完整的蜂毒肽比较接近。     

Influence of the Lipid Anchor Motif of N-Ras on the Interaction with Lipid Membranes: A Surface Plasmon Resonance Study

Ras GTPases play a crucial role in signal transduction cascades involved in cell differentiation and proliferation, and membrane binding is essential for their proper function. To determine the influence of the nature of the lipid anchor motif and the difference between the active (GTP) and inactive (GDP) forms of N-Ras on partitioning and localization in the lipid membrane, five different N-Ras constructs with different lipid anchors and nucleotide loading (Far/Far (GDP), HD/Far (GDP), HD/HD (GDP), Far (GDP), and HD/Far (GppNHp)) were synthesized. Using the surface plasmon resonance technique, we were able to follow the insertion and dissociation process of the lipidated proteins into and out of model membranes consisting of pure liquid-ordered (l_o) or liquid-disordered (l_d) phase and a heterogeneous two-phase mixture, i.e., a raft mixture with l_o + l_d phase coexistence. In addition, we examined the influence of negatively charged headgroups and stored curvature elastic stress on the binding properties of the lipidated N-Ras proteins. In most cases, significant differences were found for the various anchor motifs. In general, N-Ras proteins insert preferentially into a fluidlike, rather than a rigid, ordered lipid bilayer environment. Electrostatic interactions with lipid headgroups or stored curvature elastic stress of the membrane seem to have no drastic effect on the binding and dissociation processes of the lipidated proteins. The monofarnesylated N-Ras exhibits generally the highest association rate and fastest dissociation process in fluidlike membranes. Double lipidation, especially including farnesylation, of the protein leads to drastically reduced initial binding rates but strong final association. The change in the nucleotide loading of the natural N-Ras HD/Far induces a slightly different binding and dissociation kinetics, as well as stability of association, and seems to influence the tendency to segregate laterally in the membrane plane. The GDP-bound inactive form of N-Ras with an HD/Far anchor shows stronger membrane association, which might be due to a more pronounced tendency to self-assemble in the membrane matrix than is seen with the active GTP-bound form.     

Alternative Mechanisms for the Interaction of the Cell-Penetrating Peptides Penetratin and the TAT Peptide with Lipid Bilayers

Cell-penetrating peptides (CPPs) have recently attracted much interest due to their apparent ability to penetrate cell membranes in an energy-independent manner. Here molecular-dynamics simulation techniques were used to study the interaction of two CPPs: penetratin and the TAT peptide with 1,2-Dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dioleoyl-sn-glycero-3-phosphocholine (DOPC) phospolipid bilayers shed light on alternative mechanisms by which these peptides might cross biological membranes. In contrast to previous simulation studies of charged peptides interacting with lipid bilayers, no spontaneous formation of transmembrane pores was observed. Instead, the simulations suggest that the peptides may enter the cell by micropinocytosis, whereby the peptides induce curvature in the membrane, ultimately leading to the formation of small vesicles within the cell that encapsulate the peptides. Specifically, multiple peptides were observed to induce large deformations in the lipid bilayer that persisted throughout the timescale of the simulations (hundreds of nanoseconds). Pore formation could be induced in simulations in which an external potential was used to pull a single penetratin or TAT peptide into the membrane. With the use of umbrella-sampling techniques, the free energy of inserting a single penetratin peptide into a DPPC bilayer was estimated to be ∼75 kJmol⁻¹, which suggests that the spontaneous penetration of single peptides would require a timescale of at least seconds to minutes. This work also illustrates the extent to which the results of such simulations can depend on the initial conditions, the extent of equilibration, the size of the system, and the conditions under which the simulations are performed. The implications of this with respect to the current systems and to simulations of membrane-peptide interactions in general are discussed.     

Structural Basis for the Recognition of Peptide RJPXD33 by Acyltransferases in Lipid A Biosynthesis

UDP-N-acetylglucosamine acyltransferase (LpxA) and UDP-3-O-(acyl)-glucosamine acyltransferase (LpxD) constitute the essential, early acyltransferases of lipid A biosynthesis. Recently, an antimicrobial peptide inhibitor, RJPXD33, was identified with dual affinity for LpxA and LpxD. To gain a fundamental understanding of the molecular basis of inhibitor binding, we determined the crystal structure of LpxA from Escherichia coli in complex with RJPXD33 at 1.9 Å resolutions. Our results suggest that the peptide binds in a unique modality that mimics (R)-β-hydroxyacyl pantetheine binding to LpxA and displays how the peptide binds exclusive of the native substrate, acyl-acyl carrier protein. Acyltransferase binding studies with photo-labile RJPXD33 probes and truncations of RJPXD33 validated the structure and provided fundamental insights for future design of small molecule inhibitors. Overlay of the LpxA-RJPXD33 structure with E. coli LpxD identified a complementary peptide binding pocket within LpxD and serves as a model for further biochemical characterization of RJPXD33 binding to LpxD.     

Interaction of the C-Terminal Peptide of Pulmonary Surfactant Protein B (SP-B) with a Bicellar Lipid Mixture Containing Anionic Lipid

The hydrophobic lung surfactant SP-B is essential for respiration. SP-B promotes spreading and adsorption of surfactant at the alveolar air-water interface and may facilitate connections between the surface layer and underlying lamellar reservoirs of surfactant material. SP-B_63–78 is a cationic and amphipathic helical peptide containing the C-terminal helix of SP-B. ²H NMR has been used to examine the effect of SP-B_63–78 on the phase behavior and dynamics of bicellar lipid dispersions containing the longer chain phospholipids DMPC-d₅₄ and DMPG and the shorter chain lipid DHPC mixed with a 3∶1∶1 molar ratio. Below the gel-to-liquid crystal phase transition temperature of the longer chain components, bicellar mixtures form small, rapidly reorienting disk-like particles with shorter chain lipid components predominantly found around the highly curved particle edges. With increasing temperature, the particles coalesce into larger magnetically-oriented structures and then into more extended lamellar phases. The susceptibility of bicellar particles to coalescence and large scale reorganization makes them an interesting platform in which to study peptide-induced interactions between lipid assemblies. SP-B_63–78 is found to lower the temperature at which the orientable phase transforms to the more extended lamellar phase. The peptide also changes the spectrum of motions contributing to quadrupole echo decay in the lamellar phase. The way in which the peptide alters interactions between bilayered micelle structures may provide some insight into some aspects of the role of full-length SP-B in maintaining a functional surfactant layer in lungs.     

不同组分胶原多肽抗氧化作用的比较研究

研究发现:碱性蛋白酶+中性蛋白酶+木瓜蛋白酶三酶水解工艺(Ⅱ法)的胶原多肽中,小分子肽的比率较碱性蛋白酶+中性蛋白酶双酶水解(Ⅰ法)的胶原多肽要多;在浓度为12 mg/mL时,前者对DPPH·的清除率为78.71%,后者为57.05%;在40 mg/mL时,二者清除·OH的能力分别为27.37%和89.12%.在相同给药剂量时,Ⅱ法多肽提高小鼠GHS-Px活力和降低MDA和LF含量的效果明显优于Ⅰ法多肽.     

The Interaction of Possible Anti-AD ASA-NAP Peptide Conjugate with Tubulin: A Theoretical and Experimental Insight

International Journal of Peptide Research and Therapeutics - NAP peptide (1NAPVSIPQ8) is a small active fragment of the activity-dependent neuroprotective protein, which provides a neuroprotective...     

A Monte Carlo Study of Peptide Insertion into Lipid Bilayers: Equilibrium Conformations and Insertion Mechanisms

The membrane insertion behavior of two peptides, Magainin2 and M2δ, was investigated by applying the Monte Carlo simulation technique to a theoretical model. The model included many novel aspects, such as a new semi-empirical lipid bilayer model and a new set of semi-empirical transfer energies, which reproduced the experimental insertion behavior of Magainin2 and M2δ without parameter fitting. Additionally, we have taken into account diminished internal (intramolecular) hydrogen bonding at the N- and C-termini of helical peptides. All simulations were carried out at 305 K, above the membrane thermal phase transition temperature, and at pH 7.0. The peptide equilibrium conformations are discussed for a range of bilayers with tail polarities varying from octanol-like to alkane-like. Probability distributions of the individual amino-acid-residue positions show the dynamic nature of these equilibrium conformations. Two different insertion mechanisms for M2δ, and a translocation mechanism for Magainin2, are described. A study of the effect of bilayer thickness on M2δ insertion suggests a critical thickness above which insertion is unfavorable. Additionally, we did not need to use an orientational potential or array of hard cylinders to persuade M2δ to insert perpendicular to the membrane surface. Instead, we found that diminished internal hydrogen bonding in the helical conformation anchored the termini in the headgroups and resulted in a nearly perpendicular orientation.     

Conformational Flexibility of the Peptide Hormone Ghrelin in Solution and Lipid Membrane Bound: A Molecular Dynamics Study

Abstract

Human ghrelin is a peptide hormone of 28 aminoacid residues, in which the Ser3 is modified by an octanoyl group. Ghrelin has a major role in the energy metabolism of the human body stimulating growth hormone release as well as food intake. Here we perform molecular dynamics simulations in explicit water and in a DMPC-lipid bilayer/water system in order to structurally characterize this highly flexible peptide and its lipid binding properties. We find a loop structure with residues Glu17 to Lys 20 in the bending region and a short α-helix from residues Pro7 to Glu13. The presence of a lipid membrane does not influence these structural features, but reduces the overall flexibility of the molecule as revealed by reduced root mean square fluctuations of the atom coordinates. The octanoyl-side chain does not insert into the lipid membrane but points into the water phase. The peptide binds to the lipid membrane with its bending region involving residues Arg15, Lys16, Glu17, and Ser18. The implications of these results for the binding pocket of the ghrelin receptor are discussed.     

The Influence of Specific Phospholipids on the Interaction of Hexokinase with the Outer Mitochondrial Membrane

Repeated washing of a brain mitochondrial fraction results in a progressive decrease in the proportion of mitochondrially bound hexokinase that can be solubilized during a subsequent incubation with glucose-6-phosphate (glucose-6-P). Phospholipids removed during the washing procedure can be added back to washed mitochondria, resulting in enhancement of the solubilization by glucose-6-P. Column and thin-layer chromatographic methods have been used to isolate and identify active phospholipids. Additional studies were performed with purified lipids obtained commercially. Both lysophospholipids and acidic phospholipids were active in enhancing solubilization of hexokinase by glucose-6-P. Phospho-inositides, particularly diphosphoinositide, were quite effective, raising the possibility that the actively metabolized phosphoinositides may be involved in regulation of hexokinase binding in vivo.     

Single-Molecule Resolution of Antimicrobial Peptide Interactions with Supported Lipid A Bilayers

The molecular interactions between antimicrobial peptides (AMPs) and lipid A-containing supported lipid bilayers were probed using single-molecule total internal reflection fluorescence microscopy. Hybrid supported lipid bilayers with lipid A outer leaflets and phospholipid (1,2-dioleoyl-sn-glycero-3-phosphoethanolamine (DOPE)) inner leaflets were prepared and characterized, and the spatiotemporal trajectories of individual fluorescently labeled LL37 and Melittin AMPs were determined as they interacted with the bilayer surfaces comprising either monophosphoryl or diphosphoryl lipid A (from Escherichia coli) to determine the impact of electrostatic interactions. Large numbers of trajectories were obtained and analyzed to obtain the distributions of surface residence times and the statistics of the spatial trajectories. Interestingly, the AMP species were sensitive to subtle differences in the charge of the lipid, with both peptides diffusing more slowly and residing longer on the diphosphoryl lipid A. Furthermore, the single-molecule dynamics indicated a qualitative difference between the behavior of AMPs on hybrid Lipid A bilayers and on those composed entirely of DOPE. Whereas AMPs interacting with a DOPE bilayer exhibited two-dimensional Brownian diffusion with a diffusion coefficient of ～1.7 μm²/s, AMPs adsorbed to the lipid A surface exhibited much slower apparent diffusion (on the order of ～0.1 μm²/s) and executed intermittent trajectories that alternated between two-dimensional Brownian diffusion and desorption-mediated three-dimensional flights. Overall, these findings suggested that bilayers with lipid A in the outer leaflet, as it is in bacterial outer membranes, are valuable model systems for the study of the initial stage of AMP-bacterium interactions. Furthermore, single-molecule dynamics was sensitive to subtle differences in electrostatic interactions between cationic AMPs and monovalent or divalent anionic lipid A moieties.