Alginate as immobilization matrix and stabilizing agent in a two-phase liquid system: application in lipase-catalysed reactions.

Alginate was evaluated as an immobilization matrix for enzyme-catalyzed reactions in organic solvents. In contrast to most hydrogels, calcium alginate was found to be stable in a range of organic solvents and to retain the enzyme inside the gel matrix. In hydrophobic solvents, the alginate gel (greater than 95% water) thus provided a stable, two-phase liquid system. The lipase from Candida cylindracea, after immobilization in alginate beads, catalysed esterification and transesterification in n-hexane under both batch and continuous-flow conditions. The operational stability of the lipase was markedly enhanced by alginate entrapment. In the esterification of butanoic acid with n-butanol, better results were obtained in the typical hydrophilic calcium alginate beads than in less hydrophilic matrices. The effects of substrate concentration, matrix area, and polarity of the substrate alcohols and of the organic solvent on the esterification activity were examined. The transesterification of octyl 2-bromopropanoate with ethanol was less efficient than that of ethyl 2-bromopropanoate with octanol. By using the hydrophilic alginate gel as an immobilization matrix in combination with a mobile hydrophobic phase, a two-phase liquid system was achieved with definite advantages for a continuous, enzyme-catalysed process.     

Stability and activity of a thermostable malic enzyme in denaturants and water-miscible organic solvents

A study was made of the effects of common protein denaturants and water-miscible organic solvents on both the stability and activity of the malic enzyme [(S)-malate:NADP+ oxidoreductase (oxaloacetate-decarboxylating); EC 1.1.1.40] from the extreme thermoacidophilic archaebacterium Sulfolobus solfataricus. At 25 degrees C, the enzyme was not inactivated in 4 M urea or 0.05% SDS over 24 h, while the half-life was 30 min in 6 M guanidine hydrochloride and 5 h in 0.075% SDS. The enzyme stability in water-miscible organic solvents at 25 degrees C is somewhat surprising: after a 24-h incubation, the enzyme was completely active in 50% dimethylformamide; it lost 15% of its initial activity in 50% methanol or 15% ethanol. However, the resistance to organic solvents was greatly reduced at higher temperatures. The enzyme was able to catalyze the malate conversion even in the presence of 1.5% Triton X-100 or sodium deoxycholate. A number of solvents were found to stimulate the malic activity independent of time. Studies with 50% methanol revealed that the activation was reversible and inversely related to the temperature; moreover, the solvent was demonstrated to exclusively affect the maximal velocity of catalysis, the Km values for both substrates being unchanged. Investigation was made to find out whether there was a correlation between enzyme stability, as well as activation, and hydrophobicity of the organic medium. The residual malic activity after incubation in the water/organic medium correlated inversely with the logarithm of the partition coefficient in octanol/H2O of the mixture used as a hydrophobicity index. On the other hand, the extent of activation depended directly on the logarithm of the molar concentration of the organic solvent required for maximal enzymatic activation. Because of its remarkable resistance to organic solvents required for maximal enzymatic activation. Because of its remarkable resistance to organic solvents and protein denaturants in general, the malic enzyme from Sulfolobus solfataricus can be considered suitable for biotechnological applications.     

Redox potentials in hydro-organic media at normal and subzero temperatures. Ferro-ferricyanide and cytochrome c as models.

Redox potentials of ferro-ferricyanide and cytochrome c were measured in water/ethylene glycol and water/dimethylsulfoxide (volume ratio from 100/0 to 50/50) between 25 and -25 degrees C. For both systems, the midpoint potential decreases in the presence of organic solvents and increases by cooling. The magnitude of these variations is larger in dimethylsulfoxide than in ethylene glycol; moreover in the same solvent mixture it is larger with ferro-ferricyanide than with cytochrome c, so that the difference between the redox potentials of these two systems can be strongly affected and even reversed. While in pure water (cacodylate buffer pH 7.0, NaCl 0.1 M) they are respectively +388 and +265 mV, in 50% dimethylsulfoxide at 25 degrees C they decrease to +112 and +208 mV. Reduction of cytochrome c by ferro-ferricyanide, in this mixture, is then expected and was indeed observed. On the other hand, as (deltaE/deltaT)T, (E being the redox potential) is higher for ferro-ferricyanide than for cytochrome c, the oxidative power of the former for the latter is expected to increase as temperature decreases. This effect was observed in 50% ethylene glycol at -16 degrees C. Organic solvents and large temperature variations appear then as powerful perturbants of redox reactions. Their effects should be taken into account in studies of redox reactions carried out in cooled hydro-organic media.     

Rules for optimization of biocatalysis in organic solvents

General rules for the optimization of different biocatalytic systems in various types of media containing organic solvents are derived by combining data from the literature, and the logarithm of the partition coefficient, log P, as a quantitative measure of solvent polarity. (1) Biocatalysis in organic solvents is low in polar solvents having a log P < 2, is moderate in solvents having a log P between 2 and 4, and is high in a polar solvents having a log P > 4. It was found that this correlation between polarity and activity parallels the ability of organic solvents to distort the essential water layer that stabilizes the biocatalysts. (2) Further optimization of biocatalysis in organic solvents is achieved when the polarity of the microenvironment of the biocatalyst (log P(i)) and the continuous organic phase (log P(cph)) is tuned to the polarities of both the substrate (log P(s)) and the product (log P(p)) according to the following rules: |log P(i) - log P(s)| and |log P(cph) - log P(p)| should be minimal and |log P(cph) - log P(s)| and |log P(i) - log P(p)| should be maximal, with the exception that in the case of substrate inhibition log P(i), should be optimized with respect to log P(s) In addition to these simple optimization rules, the future developments of biocatalysis in organic solvents are discussed.     

Oxidation of aromatic compounds in organic solvents with laccase from Trametes versicolor

Summary Laccase purified from Trametes versicolor oxidizes 2,6-dimethoxyphenol (2,6-DMP) and syringaldazine in hydrophobic solvents presaturated with water, and in hydrophilic organic solvents provided that a sufficient amount of water is added. Ease of performance of the laccase test in organic solvents is improved after immobilization of the enzyme by entrapping in Sepharose CL-6B during enzyme filtration through the gel beads. The gel-enzyme association has been shown to be stable in water-presaturated solvents. Efficiency of the immobilized laccase in organic solvents containing 7% water was 10%–20% of that in potassium-citrate buffer. Immobilized laccase in organic solvents showed good stability and high tolerance to elevated temperatures.     

Enhancement of stability and activity of phospholipase A(1) in organic solvents by directed evolution.

We attempted to apply the directed evolution approach to enhancing enzyme properties in the presence of organic solvents, in which enzyme stability and activity were often drastically reduced. Stability and catalytic activity of phospholipase A(1) in the presence of an organic solvent were enhanced by error-prone polymerase chain reaction (PCR) and DNA shuffling followed by a filter-based visual screening. Three mutants (SA8, SA17 and SA20) were isolated on indicator plates (i.e., 1% phosphatidylcholine gels containing 30% dimethyl sulfoxide (DMSO)) after a second mutant library was treated in 50% DMSO for 36 h. The half-life values of the three mutants exhibited an approximately 4-fold increase. The three mutants also exhibited increased stability in all organic solvents tested compared with the wild-type enzyme. Thus, an enzyme variant having superior catalytic efficiency in most of the organic solvents could be obtained by using any solvent suitable for designing the efficient screening system, regardless of the properties of the particular solvent.     

Micellar enzymology

Experimental approaches to modelling the enzymatic function of biological membranes are discussed. Emphasis is given to pseudohomogeneous systems such as proteolipid complexes and enzymes in organic solvents; the latter are solubilized with phospholipids or synthetic surfactants. Methods for producing and studying such micellar systems are considered. The key research problems of micellar enzymology are formulated and its relation to enzyme membranology is discussed. Finally, the new potentialities are noted of applied enzymology (biotechnology) offered by application of a colloidal solution of water in organic solvents as a microheterogeneous medium for enzymatic reactions.     

Improvement of hydrogenase enzyme activity by water-miscible organic solvents

Both stability and catalytic activity of the HynSL Thiocapsa roseopersicina hydrogenase in the presence of different water-miscible organic solvents were investigated. For all organic solvents under study the substantial raise in hydrogenase catalytic activity was observed. The stimulating effect of acetone and acetonitrile on the reaction rate rose with the increase in solvent concentration up to 80%. At certain concentrations of acetonitrile and acetone (60–80%, v/v in buffer solution) the enzyme activity was improved even 4–5 times compared to pure aqueous buffer. Other solvents (aliphatic alcohols, dimethylsulfoxide and tetrahydrofuran) improved the enzyme activity at low concentrations and caused enzyme inactivation at intermediate concentrations. The long-term incubation of the hydrogenase with aliphatic alcohols, dimethylsulfoxide and tetrahydrofuran at intermediate concentrations of the latter caused enzyme inactivation. The reduced form of hydrogenase was found to be much more sensitive to action of these organic solvents than the enzyme being in oxidized state. The hydrogenase is rather stable at high concentrations of acetone or acetonitrile during long-term storage: its residual activity after incubation in these solvents upon air within 30 days was about 50%, and immobilized enzyme remained at the 100% of its activity during this period.     

Enzyme function in organic solvents.

Enzyme catalysis in organic solvents is being increasingly used for a variety of applications. Of special interest are the cases in which the medium is predominantly non-aqueous and contains little water. A display of enzyme activity, even in anhydrous solvents (water less than 0.02% by vol.), perhaps reflects that the minimum necessity for water is for forming bonds with polar amino acids on the enzyme surface. The rigidity of enzyme structure at such low water content results in novel substrate specificities, pH memory and the possibility of techniques such as molecular imprinting. Limited data indicates that, while enhanced thermal stability invariably results, the optimum temperature for catalysis may not change. If true in general, this enhanced thermostability would have extremely limited benefits. Medium engineering and biocatalyst engineering are relevant techniques to improve the efficiency and stability of enzymes in such low water systems. Most promising, as part of the latter, is the technique of protein engineering. Finally, this review provides illustrations of applications of such systems in the diverse areas of organic synthesis, analysis and polymer chemistry.     

Modeling hydration mechanisms of enzymes in nonpolar and polar organic solvents

A comprehensive study of the hydration mechanism of an enzyme in nonaqueous media was done using molecular dynamics simulations in five organic solvents with different polarities, namely, hexane, 3-pentanone, diisopropyl ether, ethanol, and acetonitrile. In these solvents, the serine protease cutinase from Fusarium solani pisi was increasingly hydrated with 12 different hydration levels ranging from 5% to 100% (w/w) (weight of water/weight of protein). The ability of organic solvents to 'strip off' water from the enzyme surface was clearly dependent on the nature of the organic solvent. The rmsd of the enzyme from the crystal structure was shown to be lower at specific hydration levels, depending on the organic solvent used. It was also shown that organic solvents determine the structure and dynamics of water at the enzyme surface. Nonpolar solvents enhance the formation of large clusters of water that are tightly bound to the enzyme, whereas water in polar organic solvents is fragmented in small clusters loosely bound to the enzyme surface. Ions seem to play an important role in the stabilization of exposed charged residues, mainly at low hydration levels. A common feature is found for the preferential localization of water molecules at particular regions of the enzyme surface in all organic solvents: water seems to be localized at equivalent regions of the enzyme surface independently of the organic solvent employed.     

Immobilization imparts stability to watermelon urease to work in water miscible organic media

The behaviour of alginate immobilized and soluble watermelon (Citrullus vulgaris) urease in water miscible organic solvents like, acetonitrile, dimethylformamide (DMF), ethanol, methanol, and propanol is described. The organic solvents exhibited a concentration dependent inhibitory effect on both the immobilized and the soluble urease in the presence of urea. Pretreatment of soluble enzyme preparations with organic solvents in the absence of substrate for 10 min at 30°C led to rapid loss in the activity, while similar pretreatment of immobilized urease with 50% (v/v) of ethanol, propanol, and acetonitrile was ineffective. Time-dependent inactivation of immobilized urease, both in the presence and in the absence of urea, revealed stability for longer duration of time even at very high concentration of organic solvents. The soluble enzyme, on the other hand, was rapidly inactivated even at fairly lower concentrations. The results suggest that the immobilization of watermelon urease in calcium alginate make it suitable for its application in organic media. the observations are discussed.     

Enzymatic transesterification of purine nucleoside having a low solubility in organic medium

Enzymatic transesterification of guanosine having low solubility against organic solvent was examined. For the transesterification between guanosine and divinyl adipate catalyzed by alkaline protease from Bacillus (Bioprase), DMSO was added to DMF to increase the solublility of the nucleoside, and the conversion rate of guanosine to the vinyl guanosine ester was less than 30%. To overcome the reversible inactivation of enzyme by hydrophilic organic solvents, the reaction was carried out with 10% (v/v) water. The transesterification reaction was effectively catalyzed in DMF/DMSO in the presence of water and the conversion rate increased ca. 70% after 7 d reaction. The result shows that the water effect of Bioprase would be a useful method for the synthesis of low solublility nucleoside esters.     

Immobilisation of bromoperoxidase from Corallina officinalis

Summary The vanadium-dependent bromoperoxidase from the macroalga Corallina officinalis was immobilised on a cellulose acetate support with retention of approaching 50% of the applied units of activity. The enzyme exhibited high thermal stability and retained activity in repeated use. The immobilised enzyme showed tolerance to organic solvents similar to that of the free enzyme in the case of methanol but differed for acetone and ethanol, and with the latter showed enhanced activity as the % by volume of the solvent was increased.     

Aspects Of Biocatalyst Stability In Organic Solvents

The stability of biocatalysis in systems containing organic solvents is reviewed. Among the examples presented are homogeneous mixtures of water and water-miscible organic solvents, aqueous/organic two-phase systems, solid biocatalysts suspended in organic solvents, enzymes in reverse micelles and modified enzymes soluble in water immiscible solvents. The stability of biocatalysts in organic solvents depends very much on the conditions. The hydrophobicity or the polarity of the solvent is clearly of great importance. More hydrophobic solvents (higher log P values) are less harmful to enzymes than less hydrophobic solvents. The water content of the system is a very important parameter. Some water is essential for enzymatic activity; however, the stability of enzymes decreases with increasing water content. Mechanisms of enzyme inactivation are discussed.     

On the stability of peptide nucleic acid duplexes in the presence of organic solvents

Nucleic acid double helices are stabilized by hydrogen bonding and stacking forces (a combination of hydrophobic, dispersive and electrostatic forces) of the base pairs in the helix. One would predict the hydrogen bonding contributions to increase and the stacking contributions to decrease as the water activity in the medium decreases. Study of nucleobase paired duplexes in the absence of water and ultimately in pure aprotic, non-polar organic solvents is not possible with natural phosphodiester nucleic acids due to the ionic phosphate groups and the associated cations, but could be possible with non-ionic nucleic acid analogues or mimics such as peptide nucleic acids. We now report that peptide nucleic acid (PNA) (in contrast to DNA) duplexes show almost unaffected stability in up to 70% dimethylformamide (DMF) or dioxane, and extrapolation of the data to conditions of 100% organic solvents indicates only minor (or no) destabilization of the PNA duplexes. Our data indicate that stacking forces contribute little if at all to the duplex stability under these conditions. The differences in behaviour between the PNA and the DNA duplexes are attributed to the differences in hydration and counter ion release rather than to the differences in nucleobase interaction. These results support the possibility of having stable nucleobase paired double helices in organic solvents.     

Lipase catalyzed esterification of glycidol in nonaqueous solvents: solvent effects on enzymatic activity

We studied the effect of organic solvents on the kinetics of porcine pancreatic lipase (pp) for the resolution of racemic glycidol through esterification with butyric acid. We quantified ppl hydration by measuring water sorption isotherms for the enzyme in the solvents/mixtures tested. The determination of initial rates as a function of enzyme hydration revealed that the enzyme exhibits maximum apparent activity in the solvents/mixtures at the same water content (9% to 11% w/w) within the associated experimental error. The maximum initial rates are different in all the media and correlate well with the logarithm of the molar solubility of water in the media, higher initial rates being observed in the solvents/mixtures with lower water solubilities. The data for the mixtures indicate that ppl apparent activity responds to bulk property of the solvent. Measurements of enzyme particle sizes in five of the solvents, as function of enzyme hydration, revealed that mean particle sizes increased with enzyme hydration in all the solvents, differences between solvents being more pronounced at enzyme hydration levels close to 10%. At this hydration level, solvents having a higher water content lead to lower reaction rates; these are the solvents where the mean enzyme particle sizes are greater. Calculation of the observable modulus indicates there are no internal diffusion limitations. The observed correlation between changes in initial rates and changes in external surface area of the enzyme particles suggests that interfacial activation of ppl is only effective at the external surface of the particles. Data obtained for the mixtures indicate that ppl enantioselectivity depends on specific solvent-enzyme interactions. We make reference to ppl hydration and activity in supercritical carbon dioxide. (c) 1994 John Wiley & Sons, Inc.     

Growth of Gram-negative bacteria in the presence of organic solvents

The growth behavior of Gram-negative bacteria when exposed to high concentrations (50% v/v) of water-insoluble organic solvents was investigated. The solvents were chosen according to their polarity values as denoted by a logarithmically expressed parameter log P, where P is the partition coefficient of a given solvent in an equimolar mixture of octanol and water. The cell growth was measured by the number of colonies developed on a solid agar medium in direct contact with the solvents. All 31 strains tested showed characteristic growth patterns. The survival and subsequent growth of bacteria increased with the increase in the log P value and was found to be strain specific. For all the strains, 100% cell growth was reached from 0% within 0.1–0.4 log P units. Log P₅₀ values, defined as the log P values at which 50% of the cells form colonies, were determined for each bacterial strain. On the whole, Pseudomonas strains were found to be more resistant to apolar solvents than all other bacteria tested. This resistance was dependent not only on the polarities but also on the toxic nature of different organic solvents, the cell membrane components, and to a limited extent, the growth medium. A tenfold increase in the Mg²⁺ concentration in the growth medium enhanced the solvent resistance of E. coli but had no such effect on Pseudomonads. In general, different growth temperatures had no impact on the solvent resistance of the Gram-negative bacteria tested.     

Enzymatic dehalogenation of 4-chlorobenzoate by 4-chlorobenzoate dehalogenase from Pseudomonas sp. CBS3 in organic solvents

Summary 4-Chlorobenzoate dehalogenase from Pseudomonas sp. CBS3 showed dehalogenating activity in various organic solvents. In alcohols like methanol (150%) or ethanol (120%) higher activities than in water (100%) were obtained. In apolar solvents like petroleum ether (5%) and nhexane (5%) only trace activities were observed. The solvents did not increase the stability of the enzyme. 4-Chlorobenzoic acid methylester, a substance not soluble in water, was not dehalogenated in organic solvents.     

Trichoderma reesei acetyl esterase catalyzes transesterification in water

Partially purified Trichoderma reesei RUT-C30 acetyl esterase preparation was found to catalyze acyl transfer reactions in organic solvents, mixtures of organic solvents with water and even in water. Using different acyl donors, the best results for acetyl transfer in water were obtained using vinyl acetate. As acetyl acceptors, a variety of hydroxyl bearing compounds in aqueous solutions were used. Degree of conversion and the number of newly formed acetates varied according to the acceptor used. Conversions over 50% were observed for the majority of several common monosaccharides, their methyl and deoxy derivatives and oligosaccharides. In several cases, the transesterification reaction exhibited strict regioselectivity, leading to only one acetyl derivative. Preparative potential of the transesterification in water was demonstrated by acetylation of methyl β- -glucopyranoside, 4-nitrophenyl β- -glucopyranoside and kojic acid, yielding 56.4% of methyl 3-O-acetyl β- -glucopyranoside, 70.2% of 4-nitrophenyl 3-O-acetyl β- -glucopyranoside and 30.9% of 7-O-acetyl-kojic acid as the only reaction products.

This enzymatically catalyzed transacetylation in water, which is applied to transformation of saccharides for the first time, opens a new area in chemoenzymatic synthesis. Its major advantages are simplicity, highly regioselective esterification of polar compounds, high yields, low enzyme consumption and elimination of the need to use toxic organic solvents.     

The amphipathic membrane proteins associated with gangliosides: The Paul-Bunnell antigen is one of the gangliophilic proteins

Two amphipathic protein fractions soluble in organic solvents as well as in water have been isolated from the ganglioside fraction of bovine erythrocyte membranes by successive chromatography in chloroform-methanol mixture on DEAE-Sephadex, silicic acid, and α-hydroxypropylated Sephadex G50 (LH60) columns. These two fractions contained a similar low molecular weight protein but with distinctively different amino acid composition. One of these proteins has been characterized by having a strong Paul-Bunnell antigen activity and had a binding affinity to ganglioside. A similar protein without Paul-Bunnell antigen activity was isolated as the major ganglioside-associated protein.