A method for release and multiple strand amplification of small quantities of DNA from endospores of the fastidious bacterium Pasteuria penetrans

Aims: To establish a reliable protocol to extract DNA from Pasteuria penetrans endospores for use as template in multiple strand amplification, thus providing sufficient material for genetic analyses. To develop a highly sensitive PCR‐based diagnostic tool for P. penetrans. Methods and Results: An optimized method to decontaminate endospores, release and purify DNA enabled multiple strand amplification. DNA purity was assessed by cloning and sequencing gyrB and 16S rRNA gene fragments obtained from PCR using generic primers. Samples indicated to be 100%P. penetrans by the gyrB assay were estimated at 46% using the 16S rRNA gene. No bias was detected on cloning and sequencing 12 housekeeping and sporulation gene fragments from amplified DNA. The detection limit by PCR with Pasteuria‐specific 16S rRNA gene primers following multiple strand amplification of DNA extracted using the method was a single endospore. Conclusions: Generation of large quantities DNA will facilitate genomic sequencing of P. penetrans. Apparent differences in sample purity are explained by variations in 16S rRNA gene copy number in Eubacteria leading to exaggerated estimations of sample contamination. Detection of single endospores will facilitate investigations of P. penetrans molecular ecology. Significance and Impact of the Study: These methods will advance studies on P. penetrans and facilitate research on other obligate and fastidious micro‐organisms where it is currently impractical to obtain DNA in sufficient quantity and quality.     

Changes of 5＇ Terminal Nucleotides of PCR Primers Causing Variable T-A Cloning Efficiency

T-A cloning takes advantage of the unpaired adenosyl residue added to the 3＇ terminus of amplified DNAs by Taq and other thermostable DNA polymerase and uses a Ilnearlzed plasmld vector with a protruding 3＇ thymldylate residue at each of Its 3＇ termini to clone polymerase chain reaction （PCR）-derived DNA fragments. It Is a simple, reliable, and efficient Ilgatlon-dependent cloning method for PCR products, but the drawback of variable cloning efficiency occurs during application. In the present work, the relationship between variable T-A cloning efficiency and the different 5＇ end nucleotlde base of primers used In PCR amplification was studied. The results showed that different cloning efficiency was obtained with different primer pairs containing A, T, C and G at the 5＇ terminus respectively. The data shows that when the 5＇ end base of primer pair was adenosyl, more white colonies could be obtained In cloning the corresponding PCR product In comparison with other bases. And the least white colonies were formed when using the primer pair with 5＇ cytldylate end. The gluanylate end primers resulted In almost the same cloning efficiency In the white colonies amount as the thymldylate end primer did, and this efficiency was much lower than that of adenosyl end primers. This presumably is a consequence of variability In 3＇dA addition to PCR products mediated by Taq polymerase. Our results offer instructions for primer design for researchers who choose T-A cloning to clone PCR products.     

Development of simple sequence repeat markers for the plant pathogenic rust fungus,Puccinia graminis

Twenty‐four dinucleotide simple sequence repeat markers were developed for the phytopathogenic fungus, Puccinia graminis. The identified loci were polymorphic, with allelic diversity ranging from two to 11 alleles. Observed and expected levels of heterozygosity ranged from 0.000 to 0.960 and from 0.113 to 0.846, respectively. Fourteen of the loci deviated significantly from Hardy–Weinberg equilibrium. Null alleles were observed for 10 of the 24 loci with a frequency of 4–16%. A preliminary screen of other Puccinia cereal rust fungi (P. coronata, P. striiformis and P. triticina) indicated that these primer pairs are specific to P. graminis.     

PCR with degenerate primers amplifies a subgenomic DNA fragment from the endoglucanase gene(s) of Torula thermophila, a thermophilic fungus

The aim of this study was to enable the polymerase chain reaction (PCR) amplification of DNA fragments within endoglucanase gene(s) of Torula thermophila, by using degenerate primers so that the amplified fragment(s) could be used as homologous probe(s) for cloning of full-length endoglucanase gene(s). The design of the degenerate PCR primers was mainly based on the endoglucanase sequences of other fungi. The endoglucanase gene sequence of Humicola insolens was the only sequence from a thermophilic fungus publicly available in the literature. Therefore, the endoglucanase sequences of the two Trichoderma species, Trichoderma reesei and Trichoderma longibrachiatum, were used to generalize the primers. PCR amplification of T. thermophila genomic DNA with these primers resilied in a specific amplification. The specificity of the amplified fragment was shown by Southern hybridization analysis using egl3 gene of T. reesei as probe. This result suggested that the degenerate primers used in this study may be of value for studies aimed at cloning of endoglucanase genes from a range of related fungi.     

Analysis of Mycelial Growth Rates and RAPD-PCR Profiles in a Population of Gaeumannomyces graminis var. tritici Originating from Wheat Plants Grown from Fungicide-treated Seed

Linear mycelial growth rates of 70 isolates of Gaeumannomyces graminis var. tritici on agar medium amended or unamended with the fungicide silthiofam were not correlated. Mycelial growth rate was not influenced by the fungicide applied to the seed of the plants from, which the isolates originated. DNA polymorphism determined by randomly amplified polymorphic DNA (RAPD) polymerase chain reaction was used to assess genetic variation among isolates. Thirty RAPD markers generated with five arbitrary 10‐mer primers revealed DNA polymorphism suitable for assessing variability in this fungal population. Cluster analysis of RAPD data identified two groups at the 54% similarity level. There was a significant relationship between the presence of 11 markers and sensitivity to silthiofam.     

Rapid detection of Phytophthora nicotianae by simple DNA extraction and real‐time loop‐mediated isothermal amplification assay

Phytophthora nicotianae is a phytopathogenic oomycete with a wide host range and worldwide distribution. Rapid detection and diagnosis at the early stages of disease development are important for the effective control of P. nicotianae. In this study, we designed a simple and rapid loop‐mediated isothermal amplification (LAMP)‐based detection method for P. nicotianae. We tested three DNA extraction methods and selected the Kaneka Easy DNA Extraction Kit version 2, which is rapid and robust for LAMP‐based detection. The designed primers were tested using mycelial DNA from 35 species (81 isolates) of Phytophthora, 12 species (12 isolates) of Pythium, one isolate of Phytopythium and one isolate each from seven other soil‐borne pathogens. All of the 42 P. nicotianae isolates were detected by these primers, and no other isolates gave positive results. Three isolates were tested for the sensitivity of the reaction, and the lowest amounts of template DNA that could be detected were 10 fg for two isolates and 1 fg for the third. The target was detected within 25 min in all tested samples, including DNA extracted from both inoculated and naturally infected plants. In contrast, PCR assays with P. nicotianae‐specific primers failed or showed weakened detection in several samples. Thus, we found that the rapid DNA extraction and LAMP assay methods developed in this study can be used to detect P. nicotianae with high sensitivity, specificity and stability.     

The terminal 5′ phosphate and proximate phosphorothioate promote ligation‐independent cloning

Function studies of many proteins are waited to develop after genome sequencing. High‐throughout technology of gene cloning will strongly promote proteins' function studies. Here we describe a ligation‐independent cloning (LIC) method, which is based on the amplification of target gene and linear vector by PCR using phosphorothioate‐modified primers and the digestion of PCR products by λ exonuclease. The phosphorothioate inhibits the digestion and results in the generation of 3′ overhangs, which are designed to form complementary double‐stranded DNA between target gene and linear vector. We compared our phosphorothioate primer cloning methods with several LIC methods, including dU primer cloning, hybridization cloning, T4 DNA polymerase cloning, and in vivo recombination cloning. The cloning efficiency of these LIC methods are as follows: phosphorothioate primer cloning > dU primer cloning > hybridization cloning > T4 DNA polymerase cloning >> in vivo recombination cloning. Our result shows that the 3′ overhangs is a better cohesive end for LIC than 5′ overhang and the existence of 5′phosphate promotes DNA repair in Escherichia coli, resulting in the improvement of cloning efficiency of LIC. We succeeded in constructing 156 expression plasmids of Aeropyrum pernix genes within a week using our method.     

Detection and quantitative analysis of zoospores of Pythium porphyrae, causative organism of red rot disease in Porphyra, by competitive PCR

The detection and quantitative analysis of Pythium porphyraezoospores was performed by PCR using PP-1 and PP-2 primers specific tothe internal transcribed spacer region of P. porphyrae. To estimatethe amount of fungal zoospores of P. porphyrae, an internal standardplasmid (pPPISC) containing a modified DNA fragment was constructed. Both ends of this fragment were complementary to the PCR primers. Amplification using primers PP-1 and PP-2 produced DNA fragments ofapproximately 700 and 400 bp from the target DNA of P. porphyraezoospores and from the pPPISC, respectively. To perform quantitativePCR, known quantities of pPPISC were added to reaction mixturescontaining the experimental DNAs extracted from zoospores. After aco-amplification reaction, the two different sized PCR products wereseparated by agarose gel electrophoresis and visualized by ethidium bromidestaining. The number of zoospores was estimated by comparing thefluorescence intensities of the PCR products using a charge-coupled deviceimage analyzer. The results show that competitive PCR using P.porphyrae specific primers and competitor pPPISC are useful tools for thequantitative analysis of P. porphyrae zoospores in seawater from Porphyra cultivation farms.     

Development of Streptococcus gordonii‐specific quantitative real‐time polymerase chain reaction primers based on the nucleotide sequence of rpoB

In this study, Streptococcus gordonii‐specific quantitative real‐time polymerase chain reaction (qPCR) primers, RTSgo‐F2/RTSgo‐R2, were developed based on the nucleotide sequences of RNA polymerase β‐subunit gene (rpoB). The specificity of the RTSgo‐F2/RTSgo‐R2 primers was assessed by conventional PCR on 99 strains comprising 63 oral bacterial species, including the type strain and eight clinical isolates of S. gordonii. PCR products were amplified from the genomic DNAs of only S. gordonii strains. The qPCR primers were able to detect as little as 40 fg of S. gordonii genomic DNA at a cycle threshold value of 33. These findings suggest that these qPCR primers detect S. gordonii with high specificity and sensitivity.     

Detection of Rhopalosiphum insertum (apple-grass aphid) predation by the predatory mite Anystis baccarum using molecular gut analysis

Abstract 1 A simple, yet sensitive polymerase chain reaction based technique was developed for the detection of the apple‐grass aphid Rhopalosiphum insertum in the gut of Anystis baccarum, a predatory mite. 2 A range of conserved polymerase chain reaction primers for insect mitochondrial and ribosomal DNA were tested in order to amplify R. insertum DNA. The mitochondrial DNA primers LrRNAR2 + N1F1, amplified a region between the ND1 and large subunit RNA genes. 3 DNA sequencing of the R. insertum ND1‐LRNA polymerase chain reaction product allowed aphid‐specific polymerase chain reaction primers to be designed. These amplified a 283‐bp product from individual aphids. No polymerase chain reaction product was amplified from individual A. baccarum. 4 Using the aphid‐specific primers against A. baccarum fed on R. insertum, the diagnostic 283‐bp product was amplified. 5 Two restriction enzymes (RsaI and AluI) produced patterns that allowed unambiguous identification of R. insertum DNA from that of Macrosiphum euphorbiae and Myzus persicae.     

RAPD-Based Inter- and Intravarietal Classification of Fungi of the gaeumannomyces-Phialophora Complex

The suitability of randomly amplified polymorphic DNAs (RAPD) for differentiation at the varietal and intravarietal level was tested on several hundred isolates of the gaeumannomyces-Phialophora (G-P) complex from different geographic locations and host plants. Amplification products obtained using two decamer primers allowed differentiation between gaeumannomyces graminis and gaeumannomyces cylindrosporus and between the three varieties of gaeumannomyces graminis, as well as further division at the intravarietal level. Thus, isolates of the causal agent of take-all on cereals, Gaeumannomyces graminis var. tritici were divided into six subgroups by amplification with these two primers. There is some evidence for an association between host preference and RAPD subgroups but further work is needed to confirm this and to determine the importance of these subgroups. This fast and easy method is a useful tool for investigating the occurrence and distribution of this pathogen and for studying changes in the populations of species and subgroups of Gaeumannomyces in cereal cropping systems     

Variation revealed by RAPD‐PCR profiles of microsymbiont Anabaena azollae strains from four N2 fixing Azolla cultures

Nitrogen fixing Anabaena azollae strains isolated from four different Azolla cultures were characterized based on their total protein profile and RAPD profile to study the existing variation among them. As expected, the isolates showed almost similar protein banding patterns, but exhibited differences in 40–70 KDa protein subunits. Polymerase chain reaction of the DNA of the isolates, using four different primers, amplified specific sequences of DNA and showed clear polymorphism among the isolates. The RAPD profile generated the fingerprinting pattern characteristic of each strain based on the sequence of the primers used. Common band sharing observed between the strains A. azollae‐RS‐KK‐SK‐AM and A. azollae‐RS‐KK‐SK‐RP probably represents maternal inheritance of DNA to the progeny. The polymorphic bands were generated specifically for the isolates A. azollae‐RS‐KK‐SK‐RP and A. azollae‐RS‐KK‐SK‐AM with primers numbered 2 and 4, respectively, which could be developed as possible markers for these isolates.     

Cyclodextrin production and genetic characterization of cyclodextrin glucanotranferase of <Emphasis Type="Italic">Paenibacillus graminis</Emphasis>

Paenibacillus graminis strains were described recently as cyclodextrin (CD) producers. Cyclodextrins are produced by cyclodextrin glucanotransferase (CGTase) which has not been characterized in P. graminis. Similar amounts of α- and β-CDs were produced by P. graminis (MC22.13) and P. macerans (LMD24.10^T). Primers were designed to sequence the gene encoding CGTase from P. graminis. A phylogenetic tree was constructed and P. graminis CGTase protein showed to be closer (79.4% protein identity) to P. macerans |P31835|. Hybridization studies suggested that the gene encoding CGTase is located in different positions in the genomes of P. macerans and P. graminis.     

Barcoding the kingdom Plantae: new PCR primers for ITS regions of plants with improved universality and specificity

The internal transcribed spacer (ITS) of nuclear ribosomal DNA is one of the most commonly used DNA markers in plant phylogenetic and DNA barcoding analyses, and it has been recommended as a core plant DNA barcode. Despite this popularity, the universality and specificity of PCR primers for the ITS region are not satisfactory, resulting in amplification and sequencing difficulties. By thoroughly surveying and analysing the 18S, 5.8S and 26S sequences of Plantae and Fungi from GenBank, we designed new universal and plant‐specific PCR primers for amplifying the whole ITS region and a part of it (ITS1 or ITS2) of plants. In silico analyses of the new and the existing ITS primers based on these highly representative data sets indicated that (i) the newly designed universal primers are suitable for over 95% of plants in most groups; and (ii) the plant‐specific primers are suitable for over 85% of plants in most groups without amplification of fungi. A total of 335 samples from 219 angiosperm families, 11 gymnosperm families, 24 fern and lycophyte families, 16 moss families and 17 fungus families were used to test the performances of these primers. In vitro PCR produced similar results to those from the in silico analyses. Our new primer pairs gave PCR improvements up to 30% compared with common‐used ones. The new universal ITS primers will find wide application in both plant and fungal biology, and the new plant‐specific ITS primers will, by eliminating PCR amplification of nonplant templates, significantly improve the quality of ITS sequence information collections in plant molecular systematics and DNA barcoding.     

Development of a PCR Assay for the Molecular Detection of Phytophthora boehmeriae in Infected Cotton

Cotton blight, caused by the oomycete Phytophthora boehmeriae, is a serious disease of cotton in China. In wet weather conditions, P. boehmeriae is usually the primary pathogen, followed by many saprophytic fungi and pathogens such as Pythium spp., Fusarium spp., Rhizoctonia and others. As P. boehmeriae grows much slower than other pathogens, it is difficult to isolate and identify. A rapid and accurate method for its specific identification is necessary for the detection of blight in infected cotton tissue. The internal transcribed spacer (ITS) regions of ribosomal DNA (rDNA) from three isolates of P. boehmeriae were amplified using the polymerase chain reaction (PCR) with the universal primers DC6 and ITS4. PCR products were cloned and sequenced. The sequences were aligned with those published of 50 other Phytophthora species, and a region specific to P. boehmeriae was used to construct the specific PCR primers PB1 and PB2. Over 106 isolates of 14 Phytophthora species and at least 20 other fungal species were used to check the specificity of the primers. PCR amplification with primers PB1 and PB2 resulted in the amplification of a product of approximately 750 bp only from isolates of P. boehmeriae. Using primers PB1 and PB2, detection sensitivity was approximately 10 fg DNA/μl. In inoculated plant material, P. boehmeriae could be detected in tissue 1 day after inoculation, prior to the appearance of symptoms. The PB primer‐based PCR assay provides an accurate and sensitive method for detecting P. boehmeriae in cotton tissue.     

Molecular identification of isolates of <Emphasis Type="Italic">Peronosclerospora sorghi</Emphasis> from maize using PCR-based SCAR marker

The fungus Peronosclerospora sorghi [Weston and Uppal (Shaw)] infects both sorghum and maize and incites downy mildew disease. Pathogenic and molecular variability among isolates of P. sorghi from sorghum and maize has been reported. In the present study we developed a DNA sequence characterized amplified region (SCAR) marker for identification of isolates of P. sorghi from maize by using polymerase chain reaction (PCR). The random amplified polymorphic DNA (RAPD) primer OPB15 consistently amplified a 1,000 base pairs (bp) product in PCR only from DNA of P. sorghi isolates from maize and not from isolates of sorghum. The PCR-amplified 1,000-bp product was cloned and sequenced. The sequence of the SCAR marker was used for designing specific primers for identification of maize isolates of P. sorghi. The SCAR primers amplified a 800 bp fragment only from genomic DNA of maize isolates of P. sorghi. The SCAR primers developed in this study are highly specific and reproducible, and proved to be powerful tool for identification of P. sorghi isolates from maize.     

Direct Haplotype‐Specific DNA Sequencing

Abstract

Determining haplotype‐specific DNA sequence information is very important in a wide range of research fields. However, no simple and robust approaches are currently available for determining haplotype‐specific sequence information. We have addressed this problem by developing a very simple and robust haplotype‐specific sequencing approach. We utilise the fact that DNA sequencing polymerases are sensitive to 3′end mismatches in the sequencing primer. By using two sequencing primers with 3′end corresponding to the two alleles in a given SNP locus, we are able to obtain allele‐specific DNA sequences from both alleles.

We evaluated this direct haplotype‐specific approach by determining haplotypes within the intron 2 sequence of the fructan‐6‐fructosyltransferase (6‐ft) gene in Lolium perenne L. We obtained reliable haplotype‐specific sequences for all primers and genotypes evaluated. We conclude that the haplotype‐specific sequencing is robust, and that the approach has a potentially very wide application range for any diploid organism.     

Isolation and characterization of two different 5S rDNA in Anguilla anguilla and in Anguilla rostrata: possible markers of evolutionary divergence

We cloned and sequenced the HaeIII 350‐bp 5S ribosomal DNA (rDNA) band of Anguilla rostrata and designed specific primers from this sequence. Polymerase chain reaction performed with these primers is able to distinguish DNA samples obtained from European (Anguilla anguilla) and American (Anguilla rostrata) eels. Two amplicons of 1200 bp and 600 bp were obtained, respectively, from A. rostrata and A. anguilla, and the whole 5S rDNA repeated unit from these eels was cloned and sequenced. Southern blot experiments, using four different restriction enzymes and the 5S nontranscribed spacers regions as probe, are able to point out specific diversity in these eels.     

Detecting an elusive invasive species: a diagnostic PCR to detect Burmese python in Florida waters and an assessment of persistence of environmental DNA

Recent studies have demonstrated that detection of environmental DNA (eDNA) from aquatic vertebrates in water bodies is possible. The Burmese python, Python bivittatus, is a semi‐aquatic, invasive species in Florida where its elusive nature and cryptic coloration make its detection difficult. Our goal was to develop a diagnostic PCR to detect P. bivittatus from water‐borne eDNA, which could assist managers in monitoring this invasive species. First, we used captive P. bivittatus to determine whether reptilian DNA could be isolated and amplified from water samples. We also evaluated the efficacy of two DNA isolation methods and two DNA extraction kits commonly used in eDNA preparation. A fragment of the mitochondrial cytochrome b gene from P. bivittatus was detected in all water samples isolated with the sodium acetate precipitate and the QIAamp DNA Micro Kit. Next, we designed P. bivittatus‐specific primers and assessed the degradation rate of eDNA in water. Our primers did not amplify DNA from closely related species, and we found that P. bivittatus DNA was consistently detectable up to 96 h. Finally, we sampled water from six field sites in south Florida. Samples from five sites, where P. bivittatus has been observed, tested positive for eDNA. The final site was negative and had no prior documented evidence of P. bivittatus. This study shows P. bivittatus eDNA can be isolated from water samples; thus, this method is a new and promising technique for the management of invasive reptiles.