截短绿色荧光蛋白突变体反式剪接修复核酶

Ⅰ型内含子核酶经过设计特定的信号引导序列（IGS）,可特异性地定点剪接目的基因RNA,从而在RNA水平达到修复病变基因的目的。以四膜虫材料,克隆了其26S rRNA内含子核酶基因,体外转录证实该I型内含子核酶具有完全的自我剪接的功能。为检测该核酶的反式剪接功能,构建了缺失后半段564bp基因序列的绿色荧光蛋白（GFP）的截短突变体重组质粒XYQ5/XYQ10pEGFP-C-2,并证实其失去了发射绿色荧光的活性。利用PCR和分子克隆技术,构建了以上EGFP突变体的反式剪接修复核酶ptrans-rib-CMV2,该核酶载体以克隆的26S RNA内含子为核心,选择EGFP编码区194位TG为剪接位点,以188-193位设计IGS序列,核酶3′端携带195-890bp的EGFP基因序列,连接于pRC-CMV2真核表达载体中。体外转录突变EGFP的原核表达载体XYQ5/10-pGEM和ptrans-rib-CMV₂,以混合转录产物为模板进行RT-PCR,电泳及测序证实产物中含有反式剪接修复的野生型EGFP mRNA,从而证实构建的反式剪接核酶具有体外反式剪接功能。将截短突变重组质粒XYQ5/XYQ10- pEGFP-C₂与核酶质粒ptrans-rib-CMV₂共转染Hela细胞,用荧光显微镜观察转染结果,发现有少量共转染的Hela细胞发出绿光;RT-PCR检测出野生型EGFP mRNA,证明构建的反式剪接核酶具有体内反式剪接的功能,但其反式剪接效率低。     

Splice site selection by intron aI3 of the COX1 gene from Saccharomyces cerevisiae.

Interactions of the 5' and 3' splice sites with intron internal sequences of the yeast mitochondrial group I intron aI3 were studied using mutation analysis. The results can be fully explained by the splice guide model in which the splice sites are defined by the Internal Guide Sequence. No evidence was found for an alternative interaction between intron nucleotides preceding the 3' splice site and nucleotides in the vicinity of the core region as was found for the Tetrahymena intron. Our results also suggest that binding of the 5' and 3' splice site nucleotides to the IGS can not take place simultaneously. The intron must therefore undergo conformational changes as the reaction proceeds from the first step of self splicing, GTP attack at the 5' splice site, to exon ligation, the second step.     

Conserved thermochemistry of guanosine nucleophile binding for structurally distinct group I ribozymes.

We report thermodynamic values for binding of the guanosine nucleophile to the ribozyme derived from the Anabaena group I intron, and find that they are similar to those measured previously for the structurally distinct Tetrahymena ribozyme. The free energy of binding guanosine 5'-monophosphate (pG) at 30 degrees C is similar for the two ribozymes. The delta(H)degrees' and delta(S)degrees' for pG binding to the Anabaena ribozyme--RNA substrate complex (E x S) are 3.4 +/- 4 kcal/mol and 27 +/- 10 e.u., respectively. The negligible enthalpic contribution and positive entropy change were found previously for the Tetrahymena ribozyme, and are considered remarkable for a hydrogen-bonding interaction between a nucleotide and a nucleic acid. These thermodynamic values may reflect conformational changes or water release upon pG binding that are comparable for the two ribozymes. In addition, the apparent chemical steps of the two ribozyme reactions share similar activation energies and a positive deltaS++. It now appears that such thermochemical values for guanosine binding and activation may be intrinsic properties of the group I intron catalytic center.     

Trans-splicing of a mutated glycosylasparaginase mRNA sequence by a group I ribozyme deficient in hydrolysis.

RNA reprogramming represents a new concept in correcting genetic defects at the RNA level. However, for the technique to be useful for therapy, the level of reprogramming must be appropriate. To improve the efficiency of group I ribozyme-mediated RNA reprogramming, when using the Tetrahymena ribozyme, regions complementary to the target RNA have previously been extended in length and accessible sites in the target RNAs have been identified. As an alternative to the Tetrahymena model ribozyme, the DiGIR2 group I ribozyme, derived from a mobile group I intron in rDNA of the myxomycete Didymium iridis, represents a new and attractive tool in RNA reprogramming. We reported recently that the deletion of a structural element within the P9 domain of DiGIR2 turns off hydrolysis at the 3' splice site (side reaction) without affecting self-splicing [Haugen, P., Andreassen, M., Birgisdottir, A.B. & Johansen, S.D. (2004) Eur. J. Biochem. 271, 1015-1024]. Here we analyze the potential of the modified ribozyme, deficient in hydrolysis at the 3' splice site, for application in group I ribozyme-mediated trans-splicing of RNA. The improved ribozyme catalyses both cis-splicing and trans-splicing in vitro of a human glycosylasparaginase mRNA sequence with the same efficiency as the original DiGIR2 ribozyme, but without detectable levels of the unwanted hydrolysis.     

Computational prediction of efficient splice sites for trans-splicing ribozymes

Group I introns have been engineered into trans-splicing ribozymes capable of replacing the 3'-terminal portion of an external mRNA with their own 3'-exon. Although this design makes trans-splicing ribozymes potentially useful for therapeutic application, their trans-splicing efficiency is usually too low for medical use. One factor that strongly influences trans-splicing efficiency is the position of the target splice site on the mRNA substrate. Viable splice sites are currently determined using a biochemical trans-tagging assay. Here, we propose a rapid and inexpensive alternative approach to identify efficient splice sites. This approach involves the computation of the binding free energies between ribozyme and mRNA substrate. We found that the computed binding free energies correlate well with the trans-splicing efficiency experimentally determined at 18 different splice sites on the mRNA of chloramphenicol acetyl transferase. In contrast, our results from the trans-tagging assay correlate less well with measured trans-splicing efficiency. The computed free energy components suggest that splice site efficiency depends on the following secondary structure rearrangements: hybridization of the ribozyme's internal guide sequence (IGS) with mRNA substrate (most important), unfolding of substrate proximal to the splice site, and release of the IGS from the 3'-exon (least important). The proposed computational approach can also be extended to fulfill additional design requirements of efficient trans-splicing ribozymes, such as the optimization of 3'-exon and extended guide sequences.     

Optimizing the substrate specificity of a group I intron ribozyme

Group I ribozymes can repair mutant RNAs via trans-splicing. Unfortunately, substrate specificity is quite low for the trans-splicing reaction catalyzed by the group I ribozyme from Tetrahymenathermophila. We have used a systematic approach based on biochemical knowledge of the function of the Tetrahymena ribozyme to optimize its ability to discriminate against nonspecific substrates in vitro. Ribozyme derivatives that combine a mutation which indirectly slows down the rate of the chemical cleavage step by weakening guanosine binding with additional mutations that weaken substrate binding have greatly enhanced specificity with short oligonucleotide substrates and an mRNA fragment derived from the p53 gene. Moreover, compared to the wild-type ribozyme, reaction of a more specific ribozyme with targeted substrates is much less sensitive to the presence of nonspecific RNA competitors. These results demonstrate how a detailed understanding of the biochemistry of a catalytic RNA can facilitate the design of customized ribozymes with improved properties for therapeutic applications.     

Functional identification of catalytic metal ion binding sites within RNA

The viability of living systems depends inextricably on enzymes that catalyze phosphoryl transfer reactions. For many enzymes in this class, including several ribozymes, divalent metal ions serve as obligate cofactors. Understanding how metal ions mediate catalysis requires elucidation of metal ion interactions with both the enzyme and the substrate(s). In the Tetrahymena group I intron, previous work using atomic mutagenesis and quantitative analysis of metal ion rescue behavior identified three metal ions (MA, MB, and MC) that make five interactions with the ribozyme substrates in the reaction's transition state. Here, we combine substrate atomic mutagenesis with site-specific phosphorothioate substitutions in the ribozyme backbone to develop a powerful, general strategy for defining the ligands of catalytic metal ions within RNA. In applying this strategy to the Tetrahymena group I intron, we have identified the pro-SP phosphoryl oxygen at nucleotide C262 as a ribozyme ligand for MC. Our findings establish a direct connection between the ribozyme core and the functionally defined model of the chemical transition state, thereby extending the known set of transition-state interactions and providing information critical for the application of the recent group I intron crystallographic structures to the understanding of catalysis.     

Autocatalytic activities of intron 5 of the cob gene of yeast mitochondria.

The terminal intron of the mitochondrial cob gene of Saccharomyces cerevisiae can undergo autocatalytic splicing in vitro. Efficient splicing of this intron required a high concentration of monovalent ion (1 M). We found that at a high salt concentration this intron was very active and performed many of the reactions described for other group I introns. The rate of the splicing reaction was dependent on the choice of the monovalent ion; the reaction intermediate, the intron-3' exon molecule, accumulated in NH4Cl but not in KCl. In addition, the intron was more reactive in KCl, accumulating in two different circular forms: one cyclized at the 5' intron boundary and the other at 236 nucleotides from the 5' end. These circular forms were able to undergo the opening and recyclization reactions previously described for the Tetrahymena rRNA intron. Cleavage of the 5' exon-intron boundary by the addition of GTP did not require the 3' terminus of the intron and the downstream exon. An anomalous guanosine addition at the 3' exon and at the middle of the intron was also detected. Hence, this intron, which requires a functional protein to splice in vivo, demonstrated a full spectrum of characteristic reactions in the absence of proteins.     

Leaving group stabilization by metal ion coordination and hydrogen bond donation is an evolutionarily conserved feature of group I introns.

To understand the behavior of group I introns on a biologically fundamental level, we must distinguish those traits that arise as the products of natural selection (selected traits) from those that arise as the products of neutral drift (non-selected traits). In practice, this distinction relies on comparing the similarities and differences among widely divergent introns to identify conserved traits. Here we address whether the strategies used by the eukaryotic group I intron from the Tetrahymena ciliate to stabilize the leaving group during splicing are maintained in the group I intron from the widely divergent Azoarcus bacterium. A substrate analogue containing a 3'-phosphorothiolate linkage, in which a sulfur atom replaces the bridging 3'-oxygen atom of the scissile phosphate, reacts 20-fold slower in the Azoarcus reaction than the corresponding unmodified substrate in the presence of Mg(II) as the only divalent cation. However, Mn(II) relieves this negative effect such that the 3'-S-P bond cleaves 21-fold faster than does the 3'O-P bond. Other thiophilic divalent metal ions such as Co(II), Cd(II), and Zn(II) similarly support cleavage of the S-P bond. These results indicate that a metal ion directly coordinates to the leaving group in the transition state of the Azoarcus ribozyme reaction. Additionally, the 3'-sulfur substitution eliminates the approximately 10(3)-fold contribution of the adjacent 2'-OH to transition state stabilization. Considering that sulfur accepts hydrogen bonds weakly compared to oxygen, this result suggests that the 2'-OH contributes to catalysis by donating a hydrogen bond to the 3'-oxygen leaving group in the transition state, presumably acting in conjunction with the metal ion to stabilize the developing negative charge. These same catalytic strategies of metal ion coordination and hydrogen bond donation operate in the Tetrahymena ribozyme reaction, suggesting that these features of catalysis have been conserved during evolution and thus extend to all group I introns. The two ribozymes also exhibit quantitative differences in their response to 3'-sulfur substitution. The Azoarcus ribozyme binds and cleaves the phosphorothiolate substrate more efficiently relative to the natural substrate than the Tetrahymena ribozyme under the same conditions, suggesting that the Azoarcus ribozyme better accommodates the phosphorothiolate at the active site both in the ground state and in the transition state. These differences may reflect either a less tightly knit Azoarcus structure and/or spatial deviations between backbone atoms in the two ribozymes that arise during divergent evolution, analogous to the well-documented relationship between protein sequence and structure.     

Stereochemical selectivity of group II intron splicing, reverse splicing, and hydrolysis reactions.

We have previously shown, using phosphorothioate substitutions at splice site, that both transesterification steps of group II intron self-splicing proceed, by stereochemical inversion, with an Sp but not an Rp phosphorothioate. Under alternative reaction conditions or with various intron fragments, group II introns can splice following hydrolysis at the 5' splice site and can also hydrolyze the bond between spliced exons (the spliced-exon reopening reaction). In this study, we have determined the stereochemical specificities of all of the major model hydrolytic reactions carried out by the aI5 gamma intron from Saccharomyces cerevisiae mitochondria. For all substrates containing exon 1 and most of the intron, the stereospecificity of hydrolysis is the same as for the step 1 transesterification reaction. In contrast, the spliced-exon reopening reaction proceeds with an Rp but not an Sp phosphorothioate at the scissile bond, as does true reverse splicing. Thus, by stereochemistry, this reaction appears to be related to the reverse of step 2 of self-splicing. Finally, a substrate RNA that contains the first exon and nine nucleotides of the intron, when reacted with the intron ribozyme, releases the first exon regardless of the configuration of the phosphorothioate at the 5' splice site, suggesting that this substrate can be cleaved by either the step 1 or the step 2 reaction site. Our findings clarify the relationships of these model reactions to the transesterification reactions of the intact self-splicing system and permit new studies to be interpreted more rigorously.     

One RNA plays three roles to provide catalytic activity to a group I intron lacking an endogenous internal guide sequence

Catalytic RNA molecules possess simultaneously a genotype and a phenotype. However, a single RNA genotype has the potential to adopt two or perhaps more distinct phenotypes as a result of differential folding and/or catalytic activity. Such multifunctionality would be particularly significant if the phenotypes were functionally inter-related in a common biochemical pathway. Here, this phenomenon is demonstrated by the ability of the Azoarcus group I ribozyme to function when its canonical internal guide sequence (GUG) has been removed from the 5′ end of the molecule, and added back exogenously in trans. The presence of GUG triplets in non-covalent fragments of the ribozyme allow trans-splicing to occur in both a reverse splicing assay and a covalent self-assembly assay in which the internal guide sequence (IGS)-less ribozyme can put itself together from two of its component pieces. Analysis of these reactions indicates that a single RNA fragment can perform up to three distinct roles in a reaction: behaving as a portion of a catalyst, behaving as a substrate, and providing an exogenous IGS. This property of RNA to be multifunctional in a single reaction pathway bolsters the probability that a system of self-replicating molecules could have existed in an RNA world during the origins of life on the Earth.     

Identification of ribozymes within a ribozyme library that efficiently cleave a long substrate RNA.

Positions 2-6 of the substrate-binding internal guide sequence (IGS) of the L-21 Sca I form of the Tetrahymena thermophila intron were mutagenized to produce a GN5 IGS library. Ribozymes within the GN5 library capable of efficient cleavage of an 818-nt human immunodeficiency virus type 1 vif-vpr RNA, at 37 degrees C, were identified by ribozyme-catalyzed guanosine addition to the 3' cleavage product. Three ribozymes (IGS = GGGGCU, GGCUCC, and GUGGCU) within the GN5 library that actively cleaved the long substrate were characterized kinetically and compared to the wild-type ribozyme (GGAGGG) and two control ribozymes (GGAGUC and GGAGAU). The two control ribozymes have specific sites within the long substrate, but were not identified during screening of the library. Under single-turnover conditions, ribozymes GGGGCU, GGCUCC, and GUGGCU cleaved the 818-nt substrate 4- to 200-fold faster than control ribozymes. Short cognate substrates, which should be structureless and therefore accessible to ribozyme binding, were cleaved at similar rates by all ribozymes except GGGGCU, which showed a fourfold rate enhancement. The rate of cleavage of long relative to short substrate under single-turnover conditions suggests that GGCUCC and GUGGCU were identified because of accessibility to their specific cleavage sites within the long substrate (substrate-specific effects), whereas GGGGCU was identified because of an enhanced rate of substrate binding despite a less accessible site in the long substrate. Even though screening was performed with 100-fold excess substrate (relative to total ribozyme), the rate of multiple-turnover catalysis did not contribute to identification of trans-cleaving ribozymes in the GN5 library.     

RNA splicing: group I intron crystal structures reveal the basis of splice site selection and metal ion catalysis

The group I intron has served as a model for RNA catalysis since its discovery 25 years ago. Four recently determined high-resolution crystal structures complement extensive biochemical studies on this system. Structures of the Azoarcus, Tetrahymena and bacteriophage Twort group I introns mimic different states of the splicing or ribozyme reaction pathway and provide information on splice site selection and metal ion catalysis. The 5'-splice site is selected by formation of a conserved G.U wobble pair between the 5'-exon terminus and the intron. The 3'-splice site is identified through stacking of three base triples, in which the middle triple contains the conserved terminal nucleotide of the intron, OmegaG. The structures support a two-metal-ion mechanism for group I intron splicing that might have corollaries to group II intron and pre-mRNA splicing by the spliceosome.