Determination of Glyphosate and AMPA in Three Representative Agricultural Austrian Soils with a HPLC-MS/MS Method

We developed a novel method to quantify adsorbed glyphosate and AMPA in soils based on an extraction utilizing Na-tetraborate, an SPE clean-up step, and subsequent LC-MS detection. Reversed phase-based separation of glyphosate and AMPA was realized after FMOC-derivatization. The quantification involved external calibration and 1,2–¹³C, ¹⁵N- labeled glyphosate as well as ¹³C, ¹⁵N labeled AMPA as internal standards. The optimum recovery for extraction was obtained with 40 mM Na-tetraborate. The method was applied in three representative soils (Kirchberg, Phyra, and Pixendorf, Austria) where glyphosate was applied by standard agricultural practices. The recovery for glyphosate extracted with 40 mM Na-tetraborate buffer was 93.5% (RSD <2%) for glyphosate at Kirchberg-cambisol; 95.7% (RSD < 2%) at Pixendorf- chernozem and 79.1% (RSD <7%) at Phyra-stagnosol. The corresponding values for AMPA were 92.4% (RSD <2%) at Kirchberg, 98.1% (RSD <2%) at Pixendorf and 69.9% (RSD <4%) at Phyra. The limits of detection for glyphosate were 6.8 μg kg^?1(RSD <10%) at Kirchberg, 4.3 μg kg^?1 (RSD <10%) at Pixendorf, and 46.5 μg kg^?1 (RSD <7%) at Phyra. The limits of detection for AMPA were 26.7 μg kg^?1 (RSD <10%) at Kirchberg, 25.2 μg kg^?1 (RSD <10%) at Pixendorf, and 120.3 μg kg^?1 (RSD <9%) at Phyra. Accordingly, the limits of quantification were 22.7 μg kg^?1(RSD <5%) for glyphosate, and 88.9 μg kg^?1 (RSD <2%) for AMPA at Kirchberg and respectively 14.4 μg kg^?1 (RSD <6%) and 84 μg kg^?1 (RSD <5%) at Pixendorf and 13.8 μg kg^?1 (RSD <6%) and 87.2 μg kg^?1 (RSD <8%) at Phyra. Both substances in the soils were lower than the LOQ before applying the herbicide Roundup. The influence of higher contents of iron oxides, clay, and acidic pH, resulting in a more pronounced adsorption of glyphosate and AMPA in the soils of Phyra and Kirchberg, is demonstrated.     

Concentrations and Health Risk of Polycyclic Aromatic Hydrocarbons in Some Brands of Biscuits in the Nigerian Market

Concentrations of 16 priority polycyclic aromatic hydrocarbons (PAHs) were determined in 40 brands of biscuits in the Nigerian market. The analyses were performed by gas chromatography-flame ionisation detection (GC-FID) after Soxhlet extraction of the sample with hexane/dichloromethane and clean-up of the extract. The concentrations of Σ16 PAHs in these biscuit samples were in the range of 35.7–645.3 μg kg^?1, 75.9–490.7 μg kg^?1, 91.5–537 μg kg^?1, 18.4–522.2 μg kg^?1, 123.5–393.8 μg kg^?1, 167.2–880 μg kg^?1, 136.5–316 μg kg^?1, and 135.5–241.6 μg kg^?1 for shortcake, digestives, cookies, shortbread, wafers, crackers, Pringles, and cabin, respectively. The concentrations of Σ8 carcinogenic PAHs in the samples ranged from not detected (nd)–323.3 μg kg^?1, 15.7–138 μg kg^?1, 9.7–312.9 μg kg^?1, nd–331.7 μg kg^?1, nd–220.9 μg kg^?1, nd–53.3 μg kg^?1, 18.4–56.6 μg kg^?1, and 6.6–170.8 μg kg^?1 for shortcake, digestives, cookies, shortbread, wafers, crackers, Pringles, and cabin, respectively. The margin of exposure (MOE), based on PAH8 as an indicator for the occurrence and effects of PAHs in food, was less than 10,000, the serious health effects value, in 30% and 8% of the brands for the child and adult scenarios, respectively.     

Prevention of biofilm growth on man-made surfaces: evaluation of antialgal activity of two biocides and photocatalytic nanoparticles

As algal growth on man-made surfaces impacts their appearance, biocides and surfaces with self-cleaning properties are widely used in the building and paint industries. The objective of this study was to evaluate the antialgal activity of two biocides (triazine and isothiazoline) and photocatalytic nanoparticles of zinc oxide (20–60 nm). An aeroterrestrial green, microalgal strain of the genus Stichococcus was chosen as the test organism. By comparing a set of different structural and physiological performance parameters, lethal and also sublethal (chronic) effects were determined. Even though the herbicide triazine effectively inhibited growth (EC50 = 1.6 μmol l^?1) and photosynthetic performance, structural properties (eg membrane integrity) were unaffected at the EC100 (250 μmol l^?1), hence this herbicide did not kill the algal cells. In contrast, and due to their multiple modes of action, isothiazoline and the photocatalytic nanoparticles (the latter activated with low UV radiation) severely impacted all performance and structural parameters.     

Nitrogen(15N) loss in the soil–plant system after herbicide application on Pennisetum glaucum

In direct sowing, desiccation of the cover crops with herbicides can affect N availability in agroecosystems, reducing N use efficiency by the crop in succession. In this sense, the objective of the study was to evaluate nitrogen losses in the soil–plant system after application of the herbicides glyphosate and glufosinate-ammonium on pearl millet [Pennisetum glaucum (L.) R. Brown, var. ADR500]. Plants were grown in a sandy soil, fertilized with ¹⁵N ammonium sulfate, at N dose of 135.7 mg kg^?1. After herbicide application, the N distribution within the plant was changed, with an observed N reduction in leaves and increased N in stalks. The glyphosate and glufosinate reduced, by 25 and 30%, respectively, the amount of N in plant tissues and increased by 3.0 g m^?2 the losses in the soil–plant system of the N provided from the fertilizer. This information can be useful in preparing management strategies that will provide greater nitrogen fertilization effectiveness and, consequently, smaller environmental impacts from the use of nitrogen fertilizers and herbicides.     

Variability of Mercury Concentrations in Soil and Leaves of Acer plantanoides and Tilia platyphyllos in Poznań City,Poland

The paper presents the results of research on mercury in the soil and leaves of maple (Acer plantanoides) and linden (Tilia platyphyllos) collected in the four districts of the city of Poznań (Poland), which differ in terms of anthropogenic pressure. The average concentration of mercury in soil was 132 μg kg^?1. The highest concentration of mercury was determined in Tilia platyphyllos (233 μg kg^?1), whereas in Acer plantanoides it amounted to 207 μg kg^?1. Based on the study, it was found that the highest concentration of mercury in the investigated leaf species was observed in the samples collected in the districts of Grunwald, Je?yce, and Old Town. The lowest concentration was observed in the samples collected in the district of New Town. The comparison of the obtained results of mercury concentration in soil and leaf samples was made in terms of anthropogenic pressure in the investigated areas and depending on the studied leaf species. Based on the statistical analysis, it was found that there is no statistically significant relationship between mercury concentration in both studied species of trees. There was, however, a relationship between the mercury concentration in leaves and soil.     

Organic Amendments to Enhance Atrazine and Metamitron Degradation in Two Contaminated Soils with Contrasting Textures

Among all types of xenobiotics, pesticides such as herbicides play a significant role in soil and water pollution due to their wide usage all over the world. This study addresses the ability of organic amendments to enhance atrazine and metamitron degradation in two herbicide-contaminated soils with contrasting textures under laboratory conditions. Soil samples were collected from surface soils with textures of sandy loam and silty clay, from northeastern Iran. Initial concentration of herbicides was 50 mg · kg^{? 1} soil. Contaminated soil samples were treated with manure, compost and vermicompost at rates of 0, 0.5, and 2% (w/w). Residual concentrations of atrazine and metamitron were determined by HPLC at the end of incubation periods of 20, 40, and 60 days. Residual concentrations of atrazine were 46.5, 38.9, and 36.2 mg · kg^{? 1} after 20, 40, and 60 days incubation, respectively. Residual metamitron concentrations were clearly lower than atrazine. After 20, 40, and 60 days, concentrations of metamitron were 2.9, 1.0, and 0.6 mg · kg^{? 1}, respectively. Organic amendments at the rates of 0.5 and 2% showed similar effects on the enhancement of herbicide degradation in soils. However, no statistically significant effect was observed among types of organic amendments (α = 0.05). Degradation was affected by soil textures. Residual concentrations of herbicides were higher in sandy loam than in silty clay soil.     

Quantification of nitrophenols,chlorophenols, and hexachlorocyclohexanes in agricultural soils in the vicinity of industrial area for the assessment of human health hazard and risk

In this study, quantification of nitrophenol (NP), chlorophenol (CP), and hexachlorocyclohexane (HCH) compounds in agricultural soils in the vicinity of the industrial region in northern Uttar Pradesh, India was carried out for the assessment of human health hazard. The concentration of ∑NP, ∑CP, and ∑HCH compounds ranged 0.33–3.64 mg kg^?1, 0.06–3.18 μg kg^?1, and 1.23–17.24 mg kg^?1, respectively, and were within the soil quality guidelines for the protection of human and environment health. Human health hazard index and cancer risk, on the basis of average daily intake of these compounds through soil for human adults and children, was lower than the acceptable limit. This study suggested low health hazard and risk due to phenolic and HCH compounds to human population.     

Phytoextraction of Risk Elements by Willow and Poplar Trees

To characterize the phytoextraction efficiency of two clones of willow trees (Salix x smithiana Willd., Salix rubens) and two clones of poplar trees (Populus nigra x maximowiczii, Populus nigra Wolterson) were planted in contaminated soil (0.4–2.0 mg Cd.kg^?1, 78–313 mg Zn.kg^?1, 21.3–118 mg Cu.kg^?1). Field experiment was carried out in Czech Republic. The study investigated their ability to accumulate heavy metals (Cd, Zn, and Cu) in harvestable plant parts. The poplars produced higher amount of biomass than willows. Both Salix clones accumulated higher amount of Cd, Zn and Cu in their biomass (maximum 6.8 mg Cd.kg^?1, 909 mg Zn.kg^?1, and 17.7 mg Cu.kg^?1) compared to Populus clones (maximum 2.06 mg Cd.kg^?1, 463 mg Zn.kg^?1, and 11.8 mg Cu.kg^?1). There were no significant differences between clones of individual species. BCs for Cd and Zn were greater than 1 (the highest in willow leaves). BCs values of Cu were very low. These results indicate that Salix is more suitable plant for phytoextraction of Cd and Zn than Populus. The Cu phytoextraction potential of Salix and Populus trees was not confirmed in this experiment due to low soil availability of this element.     

Hyperaccumulator Oilcake Manure as an Alternative for Chelate-Induced Phytoremediation of Heavy Metals Contaminated Alluvial Soils

The ability of hyperaccumulator oilcake manure as compared to chelates was investigated by growing Calendula officinalis L for phytoremediation of cadmium and lead contaminated alluvial soil. The combinatorial treatment T₆ [2.5 g kg^?1oilcake manure + 5 mmol kg^?1 EDDS] caused maximum cadmium accumulation in root, shoot and flower up to 5.46, 4.74 and 1.37 mg kg^?1and lead accumulation up to 16.11, 13.44 and 3.17 mg kg^?1, respectively at Naini dump site, Allahabad (S₃). The treatment showed maximum remediation efficiency for Cd (RR = 0.676%) and Pb (RR = 0.202%) at Mumfordganj contaminated site (S₂). However, the above parameters were also observed at par with the treatment T₅ [2.5 g kg^?1oilcake manure +2 g kg^?1 humic acid]. Applied EDDS altered chlorophyll–a, chlorophyll–b, and carotene contents of plants while application of oilcake manure enhanced their contents in plant by 3.73–8.65%, 5.81–17.65%, and 7.04–17.19%, respectively. The authors conclude that Calendula officinalis L has potential to be safely grown in moderately Cd and Pb-contaminated soils and application of hyperaccumulator oilcake manure boosts the photosynthetic pigments of the plant, leading to enhanced clean-up of the cadmium and lead-contaminated soils. Hence, the hyperaccumulator oilcake manure should be preferred over chelates for sustainable phytoremediation through soil-plant rhizospheric process.     

Occurrence and risk assessment of organophosphorus pesticide residues in Chinese tea

Tea is the second widely consumed beverage next to water. Tea drinking is one of the important pathways for human exposure of organonphosphorus pesticide. Consequently, incidence of organonphosphorus pesticide residues and risk assessment should be clear. In this study, the level of organonphosphorus pesticide residues in 810 Chinese teas manufactured between 2010–2013 was investigated using gas chromatography coupled with tandem mass spectrometry and a flame photometric detector. Incidence of organonphosphorus pesticide residues occurred with a frequency of 29% and the average concentration of 93 μg kg^?1. The residue levels varied from tea types, sale spots, and production area. Chlorpyrifos, isocarbophos, and triazophos were the only three organonphosphorus pesticides with detectable residues, and the detectable rates were 13.0%, 13.6%, and 17.4%, respectively. The corresponding average daily intake of chlorpyrifos, isocarbophos, and triazophos by tea drinking was 0.000083 μg kg^?1 bw day^?1, 0.0036 μg kg^?1 bw day^?1, and 0.0022 μg kg^?1 bw day^?1. These results showed that the total hazard quotient of organonphosphorus pesticide pesticides from tea drinking was less than 0.02 and that the tea-drinking originated organonphosphorus pesticide exposure had a little adverse health effect for human being.     

DDT and HCH (Organochlorine Pesticides) in Residential Soils and Health Assessment for Human Populations in Korba,India

Dichlorodiphenyltrichloroethane (DDT), hexachlorocyclohexane (HCH), and their isomers’ levels in residential soils were determined for the assessment of health risk in Korba, India. Observed concentrations of total HCH and total DDT in soils were more or less comparable with other parts of India and the world. ΣHCH and ΣDDT concentrations ranged between 0.9–20 μg kg^?1 and 2–315 μg kg^?1, respectively, which were lower than recommended soil quality guidelines indicating low ecotoxicological risk. Carcinogenic and non-carcinogenic impacts of HCH and DDT on human populations through soil ingestion were evaluated and presented. The incremental lifetime cancer risk (ILCR) for adults and children ranged between 7.8 × 10^?10–1.6 × 10^?7 and 4.1 × 10^?9–8.2 × 10^?7, respectively. Non-cancer health hazard quotient (HQ) ranged between 5.9 × 10^?7–1.8 × 10^?3 and 3.1 × 10^?6–9.4 × 10^?3, respectively, for adults and children. The estimated ILCR and HQ were within the safe acceptable limits of 10^?6–10^?4 and ≤1.0, respectively, indicating low risk to human populations from exposure to organochlorine pesticides (HCH and DDT) in the study area.     

Optimization of Chromium(VI) Detoxification by Pseudomonas aeruginosa and Its Application for Treatment of Industrial Waste and Contaminated Soil

The reduction of Cr(VI) to Cr(III) is a potential detoxification process. In this study, seven Pseudomonas spp. were isolated and screened for chromium reduction. Isolate P4 was able to grow in the presence of 8000 μM chromium, in spite of the fact that the isolate was not previously exposed to any metal stress. Isolate P4 was identified as Pseudomonas aeruginosa strain SRD chr3 by 16S rDNA sequence analysis. Shake flask study showed 78% reduction of 1000 μM Cr(VI) after 6 h of incubation. The optimum pH for chromium reduction by the isolate was between 6 and 8. Isolate Pseudomonas aeruginosa gave 50–80% Cr(VI) reduction even in the presence of 100 mM of Cu, Mn, Ni, and Zn and 300–800 mM NaCl in 24 h, compared with the absence of any of these metals. In a 5-L reactor, the isolate showed 84.85% reduction of Cr(VI) even at the 70th cycle, with a hydraulic retention time of 24 h from the effluent of a hard chrome plating (electroplating) industry, which contained 2100 mg L^?1 hexavalent chromium. The chromate-amended soil inoculated with the isolate showed 2800 μM chromium removal from 4000 μM Cr(VI) kg^?1 of soil, which corresponds to 70% removal. The isolate had the ability to degrade stimulated waste containing 10,000 μM chromium.     

A two-year field study of phytoremediation using Solanum nigrum L. in China

A two-year in-situ phytoremediation trial was launched in Shenyang Zhangshi (Sewage) Irrigation Area (SZIA). The phytoremediation efficiency of Solanum nigrum L. was determined, by both monitoring the change of soil Cadmium level in the upper 20 cm of soil, and calculating the plant uptake of soil Cd. After two years experimental, by monitoring the soil Cd concentrations, The Cd concentrations decreased on average from 2.75 mg kg^?1to 2.45 mg kg^?1 in the first year and from 2.33 mg kg^?1 to 1.53 mg kg^?1 in the second year, amounting to a decrease by a factor of 10.6% in the first year and 12% in the second year. After two years phytoremediation by S. nigrum, Cd concentrations of the seven experimental plots with S. nigrum growth decreased from 2.75 mg kg^?1 to 1.53 mg kg^?1, a decrease by a factor of 24.9%. And the soil Cd concentration decreased only 2.1% and 1.7% in the bared experimental plot. And the calculating of Cd uptake by S. nigrum shown that, the plants uptake 4.46% and 5.18% of the total soil Cd in 2008 and 2009, while the soil Cd concentrations decreased by a factor of 10.6% in 2008 and 12.1% in 2009.     

PHYTODESALINATION OF A MODERATELY-SALT-AFFECTED SOIL BY SULLA CARNOSA

The aim of this investigation was to evaluate the ability of the indifferent halophyte Sulla carnosa Desf. to desalinize a moderately-salt-affected soil. Seeds were sown on a fertile soil added or not with 1.5 g NaCl. kg^?1. Analogous treatments without plantation (control and salinized) were also used. Plant culture was performed under greenhouse conditions in non-perforated pots containing 10 kg soil each and irrigated with non-saline tap water. After 80 days of treatment, shoots were harvested. Soil samples were also collected after division of soil column in each pot into two horizons. Our results showed that salt addition increased electrical conductivity of saturation paste extract (ECe) from 3.3 to 8.4 dS. m^?1 and soluble sodium concentration from 0.32 to 1.15 g. kg^?1 soil in the upper horizon. In the lower horizon however, Na⁺ concentration was quasi-constant and then ECe was less increased. Plant culture inversed this pattern of sodium accumulation and salinity. Its productivity and phytodesalination capacity in 80 days were 5.0 t DW. ha^?1 and 0.3 t Na⁺. ha^?1 (24% of the added quantity), respectively. Interestingly, sodium dilution within biomass (41.5–45.6 mg. g^?1 DW) and the non-altered nutrition make this plant suitable for forage as second use after phytodesalination.     

Phenotypic seedling responses of a metal-tolerant mutant line of sunflower growing on a Cu-contaminated soil series: potential uses for biomonitoring of Cu exposure and phytoremediation

Background and aims

The potential use of a metal-tolerant sunflower mutant line for both biomonitoring and phytoremediating a Cu-contaminated soil series was investigated.

Methods

The soil series (21–1,170 mg Cu kg^?1) was sampled in field plots at control and wood preservation sites. Sunflowers were cultivated 1 month in potted soils under controlled conditions.

Results

pH and dissolved organic matter influenced Cu concentration in the soil pore water. Leaf chlorophyll content and root growth decreased as Cu exposure rose. Their EC₁₀ values corresponded to 104 and 118 μg Cu L^?1 in the soil pore water, 138 and 155 mg Cu kg^?1 for total soil Cu, and 16–18 mg Cu kg^?1 DW shoot. Biomass of plant organs as well as leaf area, length and asymmetry were well correlated with Cu exposure, contrary to the maximum stem height and leaf water content.

Conclusions

Physiological parameters were more sensitive to soil Cu exposure than the morphological ones. Bioconcentration and translocation factors and distribution of mineral masses for Cu highlighted this mutant as a secondary Cu accumulator. Free Cu²⁺ concentration in soil pore water best predicted Cu phytoavailability. The usefulness of this sunflower mutant line for biomonitoring and Cu phytoextraction was discussed.     

PLANT GROWTH REGULATORS ENHANCE GOLD UPTAKE IN BRASSICA JUNCEA

The use of plant growth regulators is well established and they are used in many fields of plant science for enhancing growth. Brassica juncea plants were treated with 2.5, 5.0 and 7.5 μM auxin indole-3-butyric acid (IBA), which promotes rooting. The IBA-treated plants were also sprayed with 100 μM gibberellic acid (GA₃) and kinetin (Kin) to increase leaf-foliage. Gold (I) chloride (AuCl) was added to the growth medium of plants to achieve required gold concentration. The solubilizing agent ammonium thiocyanate (1 g kg^?1) (commonly used in mining industries to solubilize gold) was added to the nutrient solution after six weeks of growth and, two weeks later, plants were harvested. Plant growth regulators improved shoot and root dry biomass of B. juncea plants. Inductively Coupled Plasma Optical Emission Spectrometry analysis showed the highest Au uptake for plants treated with 5.0 μM IBA. The average recovery of Au with this treatment was significantly greater than the control treatment by 45.8 mg kg^?1 (155.7%). The other IBA concentrations (2.5 and 7.5 μM) also showed a significant increase in Au uptake compared to the control plants by 14.7 mg kg^?1 (50%) and 42.5 mg kg^?1 (144.5%) respectively. A similar trend of Au accumulation was recorded in the roots of B. juncea plants. This study conducted in solution culture suggests that plant growth regulators can play a significant role in improving phytoextraction of Au.     

A Study on Cadmium Phytoremediation Potential of Indian Mustard,Brassica juncea

The objective of this study was to investigate Cd phytoremediation ability of Indian mustard, Brassica juncea. The study was conducted with 25, 50, 100, 200 and 400 mg Kg^?1 CdCl₂ in laboratory for 21 days and Cd concentrations in the root, shoot and leaf tissues were estimated by atomic absorption spectroscopy. The plant showed high Cd tolerance of up to 400 mg Kg^?1 but there was a general trend of decline in the root and shoot length, tissue biomass, leaf chlorophyll and carotenoid contents. The tolerance index (TI) of plants were calculated taking both root and shoot lengths as variables. The maximum tolerance (TI _shoot = 87.4 % and TI _root = 89.6 %) to Cd toxicity was observed at 25 mg Kg^?1, which progressively decreased with increase in dose. The highest shoot (10791 μg g^?1 dry wt) and root (9602 μg g^?1 dry wt) Cd accumulation was achieved at 200 mg kg^?1 Cd treatment and the maximum leaf Cd accumulation was 10071.6 μg g^?1 dry wt achieved at 100 mg Kg^?1 Cd, after 21 days of treatment. The enrichment coefficient and root to shoot translocation factor were calculated, which, pointed towards the suitability of Indian mustard for removing Cd from soil.     

Isolation and characterization of chromium(VI)-reducing Bacillus sp. FY1 and Arthrobacter sp. WZ2 and their bioremediation potential

Two native bacterial strains, FY1 and WZ2, that showed high chromium(VI)-reducing ability were respectively isolated from electroplating and tannery effluent–contaminated sites and identified as Bacillus and Arthrobacter. The objective of the present study was to evaluate their potential for future application in soil bioremediation. The results showed that both Bacillus sp. FY1 and Arthrobacter sp. WZ2 were tolerant to 1000 mg L^?1 Cr(VI) and capable of reducing 78–85% and 75–82% of Cr(VI) (100–200 mg L^?1) within 24 h, respectively. The Cr(VI) reduction rate decreased with increasing levels of Cr(VI) concentration (200–1000 mg L^?1). The optimum pH, temperature, and inoculum concentration for Cr(VI) reduction were found to be between pH 7.0 and 8.0; 30 and 35°C; and 1 × 10⁸ cells ml^?1, respectively. Further evidence for the bioremediation potential of Bacillus sp. FY1 and Arthrobacter sp. WZ2 was provided by the high capacity to reduce 100, 200, and 500 mg kg^?1 Cr(VI) in contaminated soil by 83–91%, 78–85%, and 71–78% within 7 days, respectively. These findings demonstrated the high potential of Bacillus sp. FY1 and Arthrobacter sp. WZ2 for application in future soil bioremediation.     

Petroleum Degradation,Biosurfactant and Laccase Production by Fusarium neocosmosporiellum RH-10: A Microcosm Study

The aim of this study was to evaluate the potential of crude oil removal by fungal strains isolated from Arak refinery. The results showed that the RH10 strain is a potent strain as a surfactant producer and degrader of petrochemical hydrocarbons. The strain was identified as a Fusarium neocosmosporiellum and could degrade 58% of hydrocarbons in the minimal medium and reduce the surface tension from 45 to 26.5 mN m^?1. Moreover, residual crude oil analysis with Fourier transform infrared spectrophotometry showed that this strain was able to degrade 50% of aliphatic compounds. To investigate the mechanism of degradation, oxidase enzymes were assayed and it was found that F. neocosmosporiellum can produce 1.94 U L^?1 of laccase in 10 g L^?1 crude oil. Carbon, nitrogen, phosphorus and soil pattern optimization in a microcosm study showed that this strain removed 44% and 27% of the crude oil from contaminated soil in 1% and 5% crude oil concentrations, respectively. Under optimum condition, 9.66 g kg^?1 crude oil was removed by F. neocosmosporiellum when the initial oil concentration was 50 g kg^?1, at the end of 150 days microcosm experiment. The results demonstrated the promising potential of fungi strain for cleaning of contaminated soil.     

Nutrient Removal as a Function of Corn Stover Cutting Height and Cob Harvest

One-pass harvest equipment has been developed to collect corn (Zea mays L.) grain, stover, and cobs that can be used as bioenergy feedstock. Nutrients removed in these feedstocks have soil fertility implication and affect feedstock quality. The study objectives were to quantify nutrient concentrations and potential removal as a function of cutting height, plant organ, and physiological stage. Plant samples were collected in 10-cm increments at seven diverse geographic locations at two maturities and analyzed for multiple elements. At grain harvest, nutrient concentration averaged 5.5 g?N kg^?1, 0.5 g?P kg^?1, and 6.2 g?K kg^?1 in cobs, 7.5 g?N kg^?1, 1.2 g?P kg^?1, and 8.7 g?K kg^?1 in the above-ear stover fraction, and 6.4 g?N kg^?1, 1.0 g?P kg^?1, and 10.7 g?K kg^?1 in the below-ear stover fraction (stover fractions exclude cobs). The average collective cost to replace N, P, and K was $11.66 Mg^?1 for cobs, $17.59 Mg^?1 for above-ear stover, and $18.11 Mg^?1 for below-ear stover. If 3 Mg ha^?1 of above-ear stover fraction plus 1 Mg of cobs are harvested, an average N, P, and K replacement cost was estimated at $64 ha^?1. Collecting cobs or above-ear stover fraction may provide a higher quality feedstock while removing fewer nutrients compared to whole stover removal. This information will enable producers to balance soil fertility by adjusting fertilizer rates and to sustain soil quality by predicting C removal for different harvest scenarios. It also provides elemental information to the bioenergy industry.