Enhancement of dissolved inorganic carbon and carbon fixation by green alga Scenedesmus sp. in the presence of alkanolamine CO2 absorbents

The influence of alkanolamine CO₂ absorbents on the CO₂ fixation in photoautotrophic culture of green alga Scenedesmus sp. was investigated using monoethanolamine (MEA), 2-amino-2-methyl-1-propanol (AMP), diethanolamine (DEA) and triethanolamine (TEA). The dissolved inorganic carbon (DIC) contents increased when alkanolamine compounds existed in the medium. Utilizing the increased DIC for algal uptake, TEA exhibited a best enhancement in CO₂ fixation performance compared to other absorbents, while primary ethanolamines displayed inhibition on cell growth due to the formation of relatively stable carbamate intermediate. By adding 5 mM TEA, the cell growth and CO₂ fixation rate increased by 30.5% compared to the case with no TEA. TEA was supplemented when cell density was doubled, tripled and quadrupled to maintain the TEA to cells ratio constant pacing the increase of cell density. The repeated addition of TEA exhibited the enhancement of CO₂ fixation rate by 39.3% and 18.5% from no-addition and one-time addition cases, respectively.     

Biodegradation of amine waste generated from post-combustion CO2 capture in a moving bed biofilm treatment system

Nitrogen and organic matter removal from reclaimer waste of a monoethanolamine (MEA) based CO₂-capture plant was demonstrated in a pre-denitrification biofilm system. The reclaimer waste was generated from a 30 % (w/w) MEA solvent used for capturing CO₂ from flue gas from a coal-fired power plant. MEA, N-(2-hydroxylethyl)glycine (HEGly) and 2-hydroxyethylformamide (HEF) were the major contaminants treated. Hydrolysis of MEA to ammonia and further oxidation of organic intermediates readily occurred in the pre-denitrification system with a hydraulic retention time of 7 h. The biofilm system achieved 98 ± 1 % removal of MEA and 72 ± 16 % removal of total nitrogen. This is the first demonstration of efficient biodegradation of real amine waste from a post-combustion CO₂ capture facility by pre-denitrification without external electron donor.     

Phytoextraction potential of water fern (Azolla pinnata) in the removal of a hazardous dye,methyl violet 2B: Artificial neural network modelling

This study investigated the potential of Azolla pinnata (AP) in the removal of toxic methyl violet 2B (MV) dye wastewater using the phytoextraction approach with the inclusion of an Artificial Neural Network (ANN) modelling. Parameters examined included the effects of dye concentration, pH and plant dosage. The highest removal efficiency was 93% which was achieved at a plant dosage of 0.8 g (dye volume = 200 mL, initial pH = 6.0, initial dye concentration = 10 mg L^?1). A significant decrease in relative frond number (RFN), a growth rate estimator, observed at a dye concentration of 20 mg L^?1 MV indicated some toxicity, which coincided with the plant pigments studies where the chlorophyll a content was lower than the control. There were little differences in the plant pigment contents between the control and those in the presence of dye (5 to 15 mg L^?1) indicating the tolerance of AP to MV at lower concentrations. A three-layer ANN model was optimized (6 neurons in the hidden layer) and successfully predicted the phytoextraction of MV (R = 0.9989, RMSE = 0.0098). In conclusion, AP proved to be a suitable plant that could be used for the phytoextraction of MV while the ANN modelling has shown to be a reliable method for the modelling of phytoextraction of MV using AP.     

Theoretical study of the geometrical and electronic structures and thermochemistry of spherophanes

A set of supramolecular cage-structures—spherophanes—was studied at the density functional B3LYP level. Full geometrical structure optimisations were made with 6–31G and 6–31G(d) basis sets followed by frequency calculations, and electronic energies were evaluated at B3LYP/6–31++G(d,p). Three different symmetries were considered: C1, Ci, and Oh. It was found that the bonds between the benzene rings are very long to allow π-electron delocalisation between them. These spherophanes show portal openings of 2.596 Å in Spher1, 4.000 Å in Meth2, 3.659 Å in Oxa3, and 4.412 Å in Thia4. From the point of view of potential host–guest interaction studies, it should also be noted that the atoms nearest to the centre of the cavities are carbons bonded to X groups. These supramolecules seem to exhibit relatively large gap HOMO?LUMO: 2.89 eV(Spher1), 5.26 eV(Meth2), 5.73 eV(Oxa3), and 4.82 eV(Thia4). The calculated ΔH°_f (298.15 K) values at B3LYP/6–31G(d) are (in kcal mol^?1) 750.98, 229.78, ?10.97, and 482.49 for Spher1, Meth2, Oxa3, and Thia4, respectively. Using homodesmotic reactions, relative to Spher1, the spherophanes Meth2, Oxa3, and Thia4 are less strained by ?399.13 kcal mol^?1, ?390.40 kcal mol^?1, and ?411.38 kcal mol^?1, respectively. Their infrared and ¹³C NMR calculated spectra are reported.     

Structural and functional studies on a variant of cystatin purified from brain of Capra hircus

Cystatins, known for their ubiquitous presence in mammalian system are thiol protease inhibitors serving important physiological functions. Here, we present a variant of cystatin isolated from brain of Capra hircus (goat) which is glycosylated but lacks disulphide bonds. Caprine brain cystatin (CBC) was isolated using alkaline treatment, ammonium sulphate fractionation (40–60%) and gel filtration chromatography on Sephacryl S-100HR column with an overall yield of 26.29% and 322-fold purification. The inhibitor gave a molecular mass of ~44 kDa as determined by SDS-PAGE and gel filtration behaviour. The Stokes radius and diffusion coefficient of CBC were 27.14 Å and 8.18 × 10^?7 cm² s^?1, respectively. Kinetic data revealed that CBC inhibited thiol proteases reversibly and competitively, with the highest inhibition towards papain (K_i = 4.10 nM) followed by ficin and bromelain. CBC possessed 34.7% α-helical content as observed by CD spectroscopy. UV, fluorescence, CD and FTIR spectroscopy revealed significant conformational change upon CBC-papain complex formation. Isothermal titration calorimetry (ITC) was used to measure the thermodynamic parameters – ΔH, ΔS, ΔG along with N (binding stoichiometry) for CBC-papain complex formation. Binding stoichiometry (N = .97 ± .07 sites) for the CBC-papain complex indicates that cystatin is surrounded by nearly one papain molecule. Negative ΔH (?5.78 kcal mol^?1) and positive ΔS (11.01 cal mol^?1 deg^?1) values suggest that the interaction between CBC and papain is enthalpically as well as entropically favoured process. The overall negative ΔG (?9.19 kcal mol^?1) value implies a spontaneous CBC-papain interaction.     

Binding of NDGA and morin with phospholipase A2: experimental and computational evidences

The effects of morin and nordihydroguaiaretic acid (NDGA), two plant secondary metabolites, on porcine pancreatic phospholipase A₂ (PLA₂) were investigated by isothermal titration calorimetry (ITC) and in silico docking analyses. The binding energies obtained for NDGA and morin from the ITC studies are ? 6.36 and ? 5.91 kcal mol^? 1, respectively. Similarly, the glide scores obtained for NDGA and morin towards PLA₂ were ? 7.32 and ? 7.23 kcal mol^? 1, respectively. Further the docked complexes were subjected to MD simulation in the presence of explicit water molecules to check the binding stability of the ligands in the active site of PLA₂. The bound ligands make hydrogen bonds with the active site residues of the enzyme and coordinate bonds with catalytically important Ca²⁺ ion. The binding of ligands at the active site of PLA₂ may also contribute to the reported anti-inflammatory properties of NDGA and morin.     

Design and Evaluation of a Novel Felbinac Transdermal Patch: Combining Ion-Pair and Chemical Enhancer Strategy

The aim of this study was to design a novel felbinac (FEL) patch with significantly higher (P?<?0.05) skin permeation amount than the commercial product SELTOUCH® using ion-pair and chemical enhancer strategy, overcoming the disadvantage of the large application area of SELTOUCH®. Six complexes of FEL with organic amines diethylamine (DEA), triethylamine (TEA), N-(2′-hydroxy-ethanol)-piperdine (HEPP), monoethanolamine (MEtA), diethanolamine (DEtA), and triethanolamine (TEtA) were prepared by ion-pair interaction, and their formation were confirmed by differential scanning calorimetry (DSC), powder X-ray diffraction (pXRD), infared spectroscopy (IR), and proton nuclear magnetic resonance spectroscopy (¹H-NMR). Subsequently, the effect of ion-pair complexes and chemical enhancers were investigated through in vitro and in vivo experiments using rabbit abdominal skin. Results showed that FEL-TEA was the most potential candidate both in isopropyl palmitate (IPP) solution and transdermal patches. Combining use of 10% N-dodecylazepan-2-one (Azone), the optimized FEL-TEA patch achieved a flux of 18.29?±?2.59 μg/cm²/h, which was twice the amount of the product SELTOUCH® (J?=?9.18?±?1.26 μg/cm²/h). Similarly, the area under the concentration curve from time 0 to time t (AUC_0-t ) in FEL-TEA patch group (15.94?±?3.58 h.μg/mL) was also twice as that in SELTOUCH® group (7.31?±?1.16 h.μg/mL). Furthermore, the in vitro skin permeation results of FEL-TEA patch was found to have a good correlation with the in vivo absorption results in rabbit. These findings indicated that a combination of ion-pair and chemical enhancer strategy could be useful in developing a novel transdermal patch of FEL.     

Kinetics and thermodynamics of catalysis and thermal inactivation of a novel α-amylase (Tp-AmyS) from Thermotoga petrophila

Abstract

This research is focussed on kinetic, thermodynamic and thermal inactivation of a novel thermostable recombinant α-amylase (Tp-AmyS) from Thermotoga petrophila. The amylase gene was cloned in pHIS-parallel1 expression vector and overexpressed in Escherichia coli. The steady-state kinetic parameters (V_max, K_m, k_cat and k_cat/K_m) for the hydrolysis of amylose (1.39?mg/min, 0.57?mg, 148.6?s^?1, 260.7), amylopectin (2.3?mg/min, 1.09?mg, 247.1?s^?1, 226.7), soluble starch (2.67?mg/min, 2.98?mg, 284.2?s^?1, 95.4) and raw starch (2.1?mg/min, 3.6?mg, 224.7?s^?1, 61.9) were determined. The activation energy (E_a), free energy (ΔG), enthalpy (ΔH) and entropy of activation (ΔS) at 98?°C were 42.9?kJ mol^?1, 74?kJ mol^?1, 39.9?kJ mol^?1 and ?92.3 J mol^?1 K^?1, respectively, for soluble starch hydrolysis. While ΔG of substrate binding (ΔG_E-S) and ΔG of transition state binding (ΔG_E-T) were 3.38 and ?14.1?kJ mol^?1, respectively. Whereas, EaD, Gibbs free energy (ΔG*), increase in the enthalpy (ΔH*) and activation entropy (ΔS*) for activation of the unfolding of transition state were 108, 107, 105?kJ mol^?1 and ?4.1 J mol^?1 K^?1. The thermodynamics of irreversible thermal inactivation of Tp-AmyS revealed that at high temperature the process involves the aggregation of the protein.     

Amine borate catabolism by bacteria isolated from contaminated metal-working fluids

Four bacterial strains (tentatively identified as strains of Aeromonas, Pseudomonas, Flavobacterium and Bacillus ) isolated from contaminated metal-working fluids were assayed for the capacity to utilize the borate derivatives of monoethanolamine (MEA), diethanolamine (DEA) and triethanolamine (TEA). Two of these strains, isolates AV1 ( Flavobacterium ) and CL1 ( Bacillus ) were capable of growth on each of the borate esters with cell yields of 0·6 gl⁻¹ for AV1 cultured on DEA- and TEA-borate, 0·3–0·4 gl⁻¹ for CL1 cultured on DEA- and TEA-borate and approximately 1·4 gl⁻¹ for AV1 and CL1 cultured on MEA-borate. In the case of strain CL1, growth yields on TEA- or DEA-borate as substrates were doubled by the addition of potassium ions. Lower ethanolamines, glycolaldehyde, acetaldehyde and ammonia were identified as breakdown products. The enzymes produced during growth upon the alkanolamine borates were shown to possess similar properties to those seen for cells cultured upon alkanolamine hydrochlorides.     

Key parameters for outdoor biomass production of Scenedesmus obliquus in solar tracked photobioreactors

The biomass productivity of Scenedesmus obliquus was investigated outdoors during all seasons in solar tracked flat panel photobioreactors (PBR) to evaluate key parameters for process optimization. CO₂ was supplied by flue gas from an attached combined block heat and power plant. Waste heat from the power plant was used to heat the culture during winter. The parameters pH, CO₂, and inorganic salt concentrations were automatically adjusted to nonlimiting levels. The optimum biomass concentration increased directly with the photosynthetic active radiation (PAR) from 3 to 5 g dry weight (DW)?L^?1 for a low PAR of 10 mol photons m^?2 day^?1 and high PAR of 40–60 mol photons m^?2 day^?1, respectively. The annual average biomass yield (photosynthetic efficiency) was 0.4?±?0.5 g DW mol^?1 photons. However, biomass yields of 1.5 g DW mol^?1 photons close to the theoretical maximum were obtained at low PAR. The productivity (including the night biomass losses) ranged during all seasons from ?5 up to 30 g DW m^?2 day^?1 with a mean productivity of 9?±?7 g DW m^?2 day^?1. Low night temperatures of the culture medium and elevated day temperatures to the species-specific optimum increased the productivity. Thus, continuous regulation of the biomass concentration and the culture temperature with regard to the fluctuating weather conditions is essential for process optimization of outdoor microalgal production systems in temperate climates.     

Phytofiltration of As3+, As5+, and Hg by the aquatic macrophyte Potamogeton pusillus L,and its potential use in the treatment of wastewater

The aim of this paper was to investigate the capacity of the aquatic macrophyte Potamogeton pusillus to remove As³⁺, As⁵⁺, and Hg from aqueous solutions. The plants were exposed to 0 mg.L^?1, 0.1 mg.L^?1, 0.5 mg.L^?1, 1 mg.L^?1, or 2 mg.L^?1 of As³⁺, As⁵⁺, and Hg for 20 days. The results obtained for the individual removal of As³⁺, As⁵⁺, and Hg from water solutions, together with their accumulation in P. pusillus, indicate that this plant can be effectively used for the removal of Hg and of moderate concentrations of As³⁺ or As⁵⁺ (0.1 mg.L^?1) from aquatic systems. Roots and leaves accumulated the highest amount of As when the plant was exposed to As⁵⁺, but when it was exposed to As³⁺, the root accumulated the highest amount of As, and the leaves, the highest amount of Hg. When compared to other aquatic plants species, the results showed that P. pusillus demonstrated a higher Hg accumulation (2465 ± 293 µg.g^?1) when the transfer coefficient was 40,580 ± 3762 L.kg ^?1, showing the great potential of this macrophyte for phytoremediation of water contaminated with Hg. To the extent of our knowledge, this is the first report on bioaccumulation of As³⁺, As⁵⁺, and Hg by P. pusillus.     

Multi-spectroscopic and voltammetric evidences for binding,conformational changes of bovine serum albumin with thiamine

The interaction between thiamine hydrochloride (TA) and bovine serum albumin (BSA) was investigated by fluorescence, FTIR, UV–vis spectroscopic and cyclic voltammetric techniques under optimised physiological condition. The fluorescence intensity of BSA is gradually decreased upon addition of TA due to the formation of a BSA–TA complex. The binding parameters were evaluated and their behaviour at different temperatures was analysed. The quenching constants (K_sv) obtained were 2.6 × 10⁴, 2.2 × 10⁴ and 2.0 × 10⁴ L mol^?1 at 288, 298 and 308 K, respectively. The binding mechanism was static-type quenching. The values of ΔH° and ΔS° were found to be 26.87 kJ mol^?1 and 21.3 J K^?1 mol^?1, and indicated that electrostatic interaction was the principal intermolecular force. The changes in the secondary structure of BSA upon interaction with TA were confirmed by synchronous and 3-D spectral results. Site probe studies reveal that TA is located in site I of BSA. The effects of some common metal ions on binding of BSA–TA complex were also investigated.     

Phytoextraction of Risk Elements by Willow and Poplar Trees

To characterize the phytoextraction efficiency of two clones of willow trees (Salix x smithiana Willd., Salix rubens) and two clones of poplar trees (Populus nigra x maximowiczii, Populus nigra Wolterson) were planted in contaminated soil (0.4–2.0 mg Cd.kg^?1, 78–313 mg Zn.kg^?1, 21.3–118 mg Cu.kg^?1). Field experiment was carried out in Czech Republic. The study investigated their ability to accumulate heavy metals (Cd, Zn, and Cu) in harvestable plant parts. The poplars produced higher amount of biomass than willows. Both Salix clones accumulated higher amount of Cd, Zn and Cu in their biomass (maximum 6.8 mg Cd.kg^?1, 909 mg Zn.kg^?1, and 17.7 mg Cu.kg^?1) compared to Populus clones (maximum 2.06 mg Cd.kg^?1, 463 mg Zn.kg^?1, and 11.8 mg Cu.kg^?1). There were no significant differences between clones of individual species. BCs for Cd and Zn were greater than 1 (the highest in willow leaves). BCs values of Cu were very low. These results indicate that Salix is more suitable plant for phytoextraction of Cd and Zn than Populus. The Cu phytoextraction potential of Salix and Populus trees was not confirmed in this experiment due to low soil availability of this element.     

Fate of heavy metals in vertical subsurface flow constructed wetlands treating secondary treated petroleum refinery wastewater in Kaduna,Nigeria

This study examined the performance of pilot-scale vertical subsurface flow constructed wetlands (VSF–CWs) planted with three indigenous plants, i.e. Typha latifolia, Cyperus alternifolius, and Cynodon dactylon, in removing heavy metals from secondary treated refinery wastewater under tropical conditions. The T. latifolia-planted VSF–CW had the best heavy metal removal performance, followed by the Cyperus alternifolius-planted VSF–CW and then the Cynodon dactylon-planted VSF–CW. The data indicated that Cu, Cr, Zn, Pb, Cd, and Fe were accumulated in the plants at all the three VSF–CWs. However, the accumulation of the heavy metals in the plants accounted for only a rather small fraction (0.09–16%) of the overall heavy metal removal by the wetlands. The plant roots accumulated the highest amount of heavy metals, followed by the leaves, and then the stem. Cr and Fe were mainly retained in the roots of T. latifolia, Cyperus alternifolius, and Cynodon dactylon (TF < 1), meaning that Cr and Fe were only partially transported to the leaves of these plants. This study showed that VSF–CWs planted with T. latifolia, Cyperus Alternifolius, and Cynodon dactylon can be used for the large-scale removal of heavy metals from secondary refinery wastewater.     

Multivariate spectrochemical analysis of interactions of three common Isatin derivatives to calf thymus DNA in vitro

Interactions of Isatin and its derivatives, Isatin-3-isonicotinylhydrazone (IINH) and Isatin-β-thiosemicarbazone (IBT), with calf thymus DNA (ctDNA) have been investigated to delineate pharmaceutical-physicochemical properties using UV–Vis/fluorescence/circular dichroism (CD) spectroscopy, viscosity measurements, and multivariate chemometrics. IINH and IBT molecules intercalate between base pairs of DNA, hypochromism in UV absorptions, increase in the CD positive band, sharp increase in specific viscosity, and the displacement of the methylene blue and Neutral Red dye in complexes with ctDNA, by the IINH and IBT molecules, respectively. The observed intrinsic binding constants (K_{b[IBT–ctDNA]?}=?1.03 × 10⁵ and K_{b[IINH–ctDNA]?}=?1.09 × 10⁵ L mol^?1) were roughly comparable to other intercalators. In contrast, Isatin binds with ctDNA via groove mode (K_{b[Isatin–ctDNA]?}=?7.32 × 10⁴ L mol^?1) without any significant enhancement in ctDNA viscosity. The fluorescence quenching of Isatin by ctDNA was observed as static. CD spectra indicated that Isatin effectively absorbs into grooves of ctDNA, leading to transition from B to C form. Thermodynamic parameters like enthalpy changes (?H < 0) and entropy changes (?S > 0) were calculated according to Van’t Hoff’s equation, indicating the spontaneous interactions. The common soft/hard chemometric methods were used not only to resolve pure concentration and spectral profiles of components using the acquired spectra but also to calculate Stern–Volmer quenching constants, binding stoichiometry, apparent binding constants (K_a), binding constants (K_b), and thermodynamic parameters. The K_b values for Isatin, IINH, and IBT were calculated as 9.18 × 10³, 1.53 × 10⁵, and 2.45 × 10⁴ L mol^?1, respectively. The results obtained from experimental-spectroscopic analyses showed acceptable agreement with chemometric outlines.     

Microalgae-based agro-industrial wastewater treatment: a preliminary screening of biodegradability

The potential of algal–bacterial symbiosis for the removal of carbon, nitrogen and phosphorus from five agro-industrial wastewaters was investigated in enclosed batch biodegradation tests using a mixed microalgae consortium and activated sludge as model microorganisms. The target wastewaters were obtained from potato processing (PW), fish processing (FW), animal feed production (MW), coffee manufacturing (CW) and yeast production (YW). The initial C/N/P ratio of the agro-industrial wastewater was correlated with its biodegradability. Thus, the highest removals of total organic carbon (TOC) and nitrogen were recorded in two fold diluted FW (64?±?2 % and 85?±?1 %, respectively), while the maximum P-PO₄ ^3? removal achieved was 89?±?1 % in undiluted PW. The biodegradable TOC was in most cases the limiting component in the treatment of the wastewaters evaluated. This study confirmed the potential of coupling carbon and nutrient recovery from agro-industrial effluents with the production of a valuable algal–bacterial biomass, despite their poor biodegradability.     

Investigation of the role of hydrophilic chain length in amphiphilic perfluoropolyether/poly(ethylene glycol) networks: towards high-performance antifouling coatings

The facile preparation of amphiphilic network coatings having a hydrophobic dimethacryloxy-functionalized perfluoropolyether (PFPE-DMA; M _w = 1500 g mol^?1) crosslinked with hydrophilic monomethacryloxy functionalized poly(ethylene glycol) macromonomers (PEG-MA; M _w = 300, 475, 1100 g mol^?1), intended as non-toxic high-performance marine coatings exhibiting antifouling characteristics is demonstrated. The PFPE-DMA was found to be miscible with the PEG-MA. Photo-cured blends of these materials containing 10 wt% of PEG-MA oligomers did not swell significantly in water. PFPE-DMA crosslinked with the highest molecular weight PEG oligomer (ie PEG1100) deterred settlement (attachment) of algal cells and cypris larvae of barnacles compared to a PFPE control coating. Dynamic mechanical analysis of these networks revealed a flexible material. Preferential segregation of the PEG segments at the polymer/air interface resulted in enhanced antifouling performance. The cured amphiphilic PFPE/PEG films showed decreased advancing and receding contact angles with increasing PEG chain length. In particular, the PFPE/PEG1100 network had a much lower advancing contact angle than static contact angle, suggesting that the PEG1100 segments diffuse to the polymer/water interface quickly. The preferential interfacial aggregation of the larger PEG segments enables the coating surface to have a substantially enhanced resistance to settlement of spores of the green seaweed Ulva, cells of the diatom Navicula and cypris larvae of the barnacle Balanus amphitrite as well as low adhesion of sporelings (young plants) of Ulva, adhesion being lower than to a polydimethyl elastomer, Silastic T2.     

Sucrose,benzylaminopurine and photoperiod effects on in vitro culture of Kaempferia galanga Linn

Abstract

Kaempferia galanga is a monocotyledonous plant of the Zingiberaceae family, commonly utilized for medicinal purposes. This study evaluates the effect of different concentrations of sucrose, benzylaminopurine (BA) and photoperiod on in vitro propagation of K. galanga. Murashige and Skoog (MS) medium supplemented with 5 mg L^?1 BA and 30 g L^?1 sucrose, and a photoperiod with 4 h of light induced the highest shoot proliferation (7.4 ± 1.0 shoots/explant) and the highest number of roots/shoot (31.3 ± 3.2). On the contrary, the maximum shoot height (4.7 ± 0.7 cm) and the highest number of leaves/shoot (4.7 ± 0.2) were obtained from cultures using MS medium supplemented with 30 g L^?1 sucrose but without BA, and exposed to 16 h of light. Hence MS medium supplemented with 5 mg L^?1 BA and 30 g L^?1 sucrose, and incubated under a 4 h light/20 h dark photoperiod was chosen as the optimal protocol for mass multiplication of K. galanga. This in-vitro technique can facilitate the production of a large number of uniform plants of K. galanga, irrespective of the seasonal factor, and could be used as a tool for conservation of the species.     

Biosorption of Basic Blue 7 by fungal cells immobilized on the green-type biomatrix of Phragmites australis spongy tissue

Biosorption is an effective alternative method for the control of water pollution caused by different pollutants such as synthetic dyes and metals. A new and efficient biomass system was developed from the passively immobilized fungal cells. The spongy tissue of Phragmites australis was considered as the carrier for the immobilization of Neurospora sitophila cells employed for the biosorption of Basic Blue 7. This plant tissue was used for the first time as a carrier for fungal cells. The biosorption was examined through batch- and continuous-mode operations. The biosorption process conformed well to the Langmuir model. Maximum monolayer biosorption capacity of the biosorbent was recorded as 154.756 mg g^?1. Kinetic findings showed a very good compliance with the pseudo-second-order model. The negative values of ΔG° indicated a spontaneous nature of the biosorption process and a positive value of ΔH° (14.69 kJ mol^?1) concluded favorable decolorization at high temperature. The scanning electron microscopy analysis showed that a porous, rippled, and rough surface of biomass system was covered with BB7 molecular cloud. IR results revealed that functional groups like –OH, –NH, and C?O participated to the decolorization. Breakthrough and exhausted points were found as 360 and 570 minutes, respectively. The biomass system was successfully applied to the treatment of real wastewater.     

DETERMINATION OF METHYLENE BLUE BIOSORPTION BY Rhizopus arrhizus IN THE PRESENCE OF SURFACTANTS WITH DIFFERENT CHEMICAL STRUCTURES

Methylene blue (MB) biosorption properties of Rhizopus arrhizus were investigated in the presence of surfactants. The effects of cationic and anionic surfactants on MB removal by dead biomass (1 g L^?1) were determined. MB removal was tested as a function of initial pH (2–12), contact time (5–1440 min), and dye (37.4–944.7 mg L^?1) and surfactant (0–10 mM) concentrations. The opposite charged anionic surfactant dodecylbenzenesulfonic acid sodium salt (DBS) enhanced sorption of cationic MB by biomass dramatically. Maximum biosorption capacity was 471.5 mg g^?1 at pH 8 with 0.5 mM DBS at 944.7 mg L^?1 MB concentration. The surfactant-stimulated fungal decolorization method may provide a highly efficient, inexpensive, and time-saving procedure in biological wastewater treatment technologies.