Extraction of hydrocarbons from freshwater green microalgae (Botryococcus sp.) biomass after phycoremediation of domestic wastewater

This study was undertaken to analyze the efficiency of Botryococcus sp. in the phycoremediation of domestic wastewater and to determine the variety of hydrocarbons derived from microalgal oil after phycoremediation. The study showed a significant (p < 0.05) reduction of pollutant loads of up to 93.9% chemical oxygen demand, 69.1% biochemical oxygen demand, 59.9% total nitrogen, 54.5% total organic carbon, and 36.8% phosphate. The average dry weight biomass produce was 0.1 g/L of wastewater. In addition, the dry weight biomass of Botryococcus sp. was found to contain 72.5% of crude oil. The composition analysis using Gas Chromatogram - Mass Spectrometry (GC-MS) found that phthalic acid, 2-ethylhexyltridecyl ester (C₂₉H₄₈O₄), contributed the highest percentage (71.6%) of the total hydrocarbon compounds to the extracted algae oil. The result of the study suggests that Botryococcus sp. can be used for effective phycoremediation, as well as to provide a sustainable hydrocarbon source as a value-added chemical for the bio-based plastic industry.     

Microplates as a microreactor platform for microalgae research

High‐throughput platforms for microalgae screening are not yet commercially available. In this study, the feasibility of 96‐well microplates was analyzed for microalgae research. Equivalence among wells, as culture microreactors, was investigated in controlled high CO₂ conditions. Specific growth rates of two microalgae species, Scenedesmus sp. UTEX1589 and an environmental isolate, were significantly higher in border wells than in internal positions. Furthermore, growth rate gradients analyzed as contours throughout the platform were observed for Scenedesmus sp. However, the output variable exhibited high precision associated with a low coefficient of variation (CV), between 6.8 and 7.8%. In a demonstrative experiment to determine the effect of culture media dilution on six microalgae species, treatments were randomized in the central subset of a microplate. Results were consistent and statistically sound (CV 9.4–12.9%), and showed that microalgae species could grow with no detrimental effect in 50% (v/v) dilution of the culture medium. Provided border wells exclusion and a randomized design, 96‐well microplates are a practical and statistical robust platform for microalgae research. © 2013 American Institute of Chemical Engineers Biotechnol. Prog., 29:638–644, 2013     

Phycoremediation resultant lipid production and antioxidant changes in green microalgae Chlorella Sp.

In this investigation, we report on the treatment of tannery wastewater using microalgae Chlorella species to produce lipid and fatty acid as well as changes in antioxidant metabolism during the treatment. The variation in growth, production of pigments, antioxidant metabolism, lipid and fatty acids, and nutrient removal from wastewater during the remediation were observed. Surprisingly, a profuse growth was found in 50% diluted tannery wastewater (TW), which supported to accumulate high yield of lipid (18.5%) and unsaturated fatty acids (50.05%). The antioxidant activity of microalgae in both the concentrations (50% and 100% TW) were viz., lipid peroxidation 1.6 ± 0.1 and 2.3 ± 0.02nmol MDA mg^?1 protein, SOD 10.3 ± 0.4 and 15.7 ± 0.9 U mg^?1 protein, CAT 0.17 ± 0.036 and 0.52 ± 0.06 U mg^?1 protein, and APX 7.2 ± 0.8 and 11.2 ± 09 U mg^?1 protein respectively, which point out that the free radical scavenging mechanism against heavy metal stress. Maximum phycoremediation of heavy metals observed from both concentrations during the healthy growth period were Cr – 73.1, 45.7%, Cu – 90.4, 78.1%, Pb – 92.1, 52.2%, and Zn – 81.2, 44.6%, respectively. This study proved the potential use of Chlorella for heavy metal and nutrient removal from tannery wastewater. Moreover, an unaffected growth with high antioxidant activity of this species promises a sustainable lipid and fatty acid contents for biofuel production.     

Characterization of sorption sites and differential stress response of microalgae isolates against tannery effluents from ranipet industrial area—An application towards phycoremediation

Phycoremediation ability of microalgae namely Oscillatoria acuminate and Phormidium irrigum were validated against the heavy metals from tannery effluent of Ranipet industrial area. The microalgae species were cultured in media containing tannery effluent in two different volumes and the parameters like specific growth rate, protein content and antioxidant enzyme activities were estimated. FTIR spectroscopy was carried out to know the sorption sites interaction. The antioxidant enzymes namely superoxide dismutase (SOD), catalase (CAT) and glutathione (GSH) contents were increased in microalgae species indicating the free radical scavenging mechanism under heavy metal stress. SOD activity was 0.502 and 0.378 units/gram fresh weight, CAT activity was 1.36 and 0.256 units/gram fresh weight, GSH activity was 1.286 and 1.232 units/gram fresh weight respectively in the effluent treated microalgae species. Bio sorption efficiency for Oscillatoria acuminate and Phormidium irrigum was 90% and 80% respectively. FTIR analysis revealed the interaction of microalgae species with chemical groups present in the tannery effluent. From the results, the microalgae Oscillatoria acuminate possess high antioxidant activity and bio sorption efficiency when compared to Phormidium irrigum and hence considered useful in treating heavy metals contaminated effluents.     

Phycoremediation of municipal wastewater by microalgae to produce biofuel

Municipal wastewater (WW), if not properly remediated, poses a threat to the environment and human health by carrying significant loads of nutrients and pathogens. These contaminants pollute rivers, lakes, and natural reservoirs where they cause eutrophication and pathogen-mediated diseases. However, the high nutrient content of WW makes it an ideal environment for remediation with microalgae that require high nutrient concentrations for growth and are not susceptible to toxins and pathogens. Given that an appropriate algal strain is used for remediation, the incurred biomass can be refined for the production of biofuel. Four microalgal species (Chlamydomonas reinhardtii, Chlorella sp., Parachlorella kessleri-I, and Nannochloropsis gaditana) were screened for efficient phycoremediation of municipal WW and potential use for biodiesel production. Among the four strains tested, P. kessleri-I showed the highest growth rate and biomass production in 100% WW. It efficiently removed all major nutrients with a removal rate of up to 98% for phosphate after 10 days of growth in 100% municipal WW collected from Delhi. The growth of P. kessleri-I in WW resulted in a 50% increase of biomass and a 115% increase of lipid yield in comparison to growth in control media. The Fatty acid methyl ester (FAME), and fuel properties of lipids isolated from cells grown in WW complied with international standards. The present study provides evidence that the green alga P. kessleri-I effectively remediates municipal WW and can be used to produce biodiesel.     

Enhancement of total lipid yield by nitrogen,carbon, and iron supplementation in isolated microalgae

The biochemical contents and biodiesel production ability of three microalgal strains grown under different sodium nitrate, sodium carbonate, and ferric ammonium citrate (iron) levels were investigated. The highest biomass and lipid contents were found in Scenedesmus sp., Chlorella sp., and Chlamydomonas sp. when grown in normal BG‐11 containing sodium carbonate concentration at 0.03 g · L^?1, and in normal BG‐11 containing iron concentration (IC) at 0.009 or 0.012 g · L^?1. Increasing the sodium nitrate level increased the biomass content, but decreased the lipid content in all three microalgae. Among the three microalgae, Scenedesmus sp. showed the highest total lipid yield of 0.69 g · L^?1 under the IC of 0.012 g · L^?1. Palmitic and oleic acids were the major fatty acids of Scenedesmus sp. and Chlamydomonas sp. lipids. On the other hand, Chlorella sp. lipids were rich in palmitic, oleic, and linolenic acids, and henceforth contributing to poor biodiesel properties below the standard limits. The three isolated strains had a potential for biodiesel production. Nevertheless, Scenedesmus sp. from stone quarry pond water was the most suitable source for biodiesel production with tolerance toward the high concentration of sodium carbonate without the loss of its biodiesel properties.     

Flocculation of microalgae using cationic starch

Due to their small size and low concentration in the culture medium, cost-efficient harvesting of microalgae is a major challenge. We evaluated the potential of cationic starch as a flocculant for harvesting microalgae using jar test experiments. Cationic starch was an efficient flocculant for freshwater (Parachlorella, Scenedesmus) but not for marine microalgae (Phaeodactylum, Nannochloropsis). At high cationic starch doses, dispersion restabilization was observed. The required cationic starch dose to induce flocculation increased linearly with the initial algal biomass concentration. Of the two commercial cationic starch flocculants tested, Greenfloc 120 (used in wastewater treatment) was more efficient than Cargill C*Bond HR 35.849 (used in paper manufacturing). For flocculation of Parachlorella using Greenfloc 120, the cationic starch to algal biomass ratio required to flocculate 80% of algal biomass was 0.1. For Scenedesmus, a lower dose was required (ratio 0.03). Flocculation of Parachlorella using Greenfloc 120 was independent of pH in the pH range of 5 to 10. Measurements of the maximum quantum yield of PSII suggest that Greenfloc 120 cationic starch was not toxic to Parachlorella. Cationic starch may be used as an efficient, nontoxic, cost-effective, and widely available flocculant for harvesting microalgal biomass.     

Biodegradation of naphthalene-2-sulfonic acid present in tannery wastewater by bacterial isolates <Emphasis Type="Italic">Arthrobacter</Emphasis> sp. 2AC and <Emphasis Type="Italic">Comamonas</Emphasis> sp. 4BC

Two bacterial strains, 2AC and 4BC, both capable of utilizing naphthalene-2-sulfonic acid (2-NSA) as a sole source of carbon, were isolated from activated sludges previously exposed to tannery wastewater. Enrichments were carried out in mineral salt medium (MSM) with 2-NSA as the sole carbon source. 16S rDNA sequencing analysis indicated that 2AC is an Arthrobacter sp. and 4BC is a Comamonas sp. Within 33 h, both isolates degraded 100% of 2-NSA in MSM and also 2-NSA in non-sterile tannery wastewater. The yield coefficient was 0.33 g biomass dry weight per gram of 2-NSA. A conceptual model, which describes the aerobic transformation of organic matter, was used for interpreting the biodegradation kinetics of 2-NSA. The half-lives for 2-NSA, at initial concentrations of 100 and 500 mg/l in MSM, ranged from 20 h (2AC) to 26 h (4BC) with lag-phases of 8 h (2AC) and 12 h (4BC). The carbon balance indicates that 75–90% of the initial TOC (total organic carbon) was mineralized, 5–20% remained as DOC (dissolved organic carbon) and 3–10% was biomass carbon. The principal metabolite of 2-NSA biodegradation (in both MSM and tannery wastewater) produced by Comamonas sp. 4BC had a MW of 174 and accounted for the residual DOC (7.0–19.0% of the initial TOC and 66% of the remaining TOC). Three to ten percent of the initial TOC (33% of the remaining TOC) was associated with biomass. The metabolite was not detected when Arthrobacter sp. 2AC was used, and a lower residual DOC and biomass carbon were recorded. This suggests that the two strains may use different catabolic pathways for 2-NSA degradation. The rapid biodegradation of 2-NSA (100 mg/l) added to non-sterile tannery wastewater (total 2-NSA, 105 mg/l) when inoculated with eitherArthrobacter 2AC or Comamonas 4BC showed that both strains were able to compete with the indigenous microorganisms and degrade 2-NSA even in the presence of alternate carbon sources (DOC in tannery wastewater = 91 mg/l). The results provide information useful for the rational design of bioreactors for tannery wastewater treatment.     

Treating Urban Wastewater: Nutrient Removal by Using Immobilized Green Algae in Batch Cultures

Essential roles of microalgae during the tertiary treatment of municipal wastewater have been proven. In order to avoid wash out of the biomass and also modify the quality of the treated wastewater; some techniques such as cell immobilization have been developed. To do so, in this study four samples from two species of microalgae (Chlorella vulgaris and Chlamydomonas sp.) were determined and confirmed by taxonomic identification. The samples were immobilized in calcium alginate beads. Within 10 days the amounts of nitrate (No₃^?-N) and orthophosphate (Po₄^3?-P) were measured to calculate the removal efficacy for each individual sample. Based on the standard methods, the amount of nitrate and orthophosphate were determined every 3 days within 10 days. The results indicate that immobilized microalgae are able to remove the nutrients and reduce the amount of nitrate and orthophosphate, significantly. Furthermore, the C. vulgaris (YG02) was the best species in this experience with 72% and 99% of reduction in the amount of nitrate and orthophosphate, respectively.     

Toxicity and bioremediation of As(III) and As(V) in the green microalgae Botryococcus braunii: A laboratory study

Worldwide threats of fuel shortages in the near future and climate change because of greenhouse gas emissions are posing severe challenges and therefore it is vital to search for sustainable ways of preventing the consequences. The dual use of microalgae for phycoremediation and biomass production for sustainable biofuel production is a viable choice. Phycoremediation of As(III) and As(V) ions using microalgae was investigated in a two-staged batch reactor. Accumulation and toxicity of inorganic arsenic forms (As(III) and As(V)) to green microalgae Botryococcus braunii depend on environmental factors. Dissolved oxygen and pH cycles did not significantly differ due to the absence or presence of arsenic (either As(III) or As(V)) ions in the culture. Monod model was utilized for representing the growth kinetics of microalgae in pure media containing various concentrations of nitrate ions. Maximum specific growth rate and saturation constant were found to be 0.14788 d^?1 and 0.00105 g/L, respectively. With the increase in concentration of phosphate in growth medium, the growth of microalgae increased. Media with NaCl (1.0 g/L) and NaHCO₃ (1 g/L) resulted in higher maximum biomass concentration. Effect of coexisting ions on phycoremediation of As(III) and As(V) ions using microalgae was studied.     

Efficient bioremediation of tannery wastewater by monostrains and consortium of marine Chlorella sp. and Phormidium sp.

This study evaluated the bioremediation potential of two marine microalgae Chlorella sp. and Phormidium sp., both individually and in consortium, to reduce various pollutants in tannery wastewater (TW). The microalgae were grown in hazardous 100% TW for 20 days, and the reductions in biochemical oxygen demand (BOD), chemical oxygen demand (COD), total nitrogen (TN), total phosphorous (TP), chromium (Cr) and total dissolved solids (TDS) of the wastewater monitored periodically. Both marine isolates reduced the BOD and COD by ≥90% in the consortium and by over 80% individually. Concentrations of TN and TP were reduced by 91.16% and 88%, respectively, by the consortium. Removal/biosorption efficiencies for chromium ranged from 90.17–94.45%. Notably, the TDS, the most difficult to deal with, were reduced by >50% within 20 days by the consortium. The novel consortium developed in this study reduced most of the ecologically harmful components in the TW to within the permissible limits of discharge in about 5 to 15 days of treatment. Thus, both the tested marine strains of Chlorella and Phormidium sp. are promising for bioremediating/detoxifying TW and adequately improve the water quality for safe discharge into open water bodies, in particular when used as a consortium.     

Bacterial diversity, organic pollutants and their metabolites in two aeration lagoons of common effluent treatment plant (CETP) during the degradation and detoxification of tannery wastewater

In this study, PCR-RFLP and GC-MS approaches were used to characterize the bacterial diversity, organic pollutants and metabolites during the tannery wastewater treatment process at common effluent treatment plant (CETP). Results revealed that the bacterial communities growing in aeration lagoon-I were dominated with Escherichia sp., Stenotrophomonas sp., Bacillus sp. and Cronobacter sp. while that of aeration lagoon-II prevailed with Stenotrophomonas sp., and Burkholderiales bacterium, respectively. The HPLC and GC-MS analysis revealed that most of the organic pollutants detected in untreated tannery wastewater samples were diminished from bacterial treated tannery wastewater samples. Only two pollutants i.e. L-(+)-lactic acid and acetic acid could not be degraded by bacteria whereas benzene and 2-hydroxy-3-methyl-butanoic acid was produced as new metabolites during the bacterial treatment of tannery wastewater in aeration lagoon II of CETP. Further, it was observed that after bacterial treatment, the toxicity of tannery effluent was reduced significantly allowing 90% seed germination.     

Mixotrophic and photoautotrophic cultivation of 14 microalgae isolates from Saskatchewan, Canada: potential applications for wastewater remediation for biofuel production

Northern regions are generally viewed as unsuitable for microalgal biofuel production due to unfavorable climate and solar insolation levels. However, these conditions can potentially be mitigated by coupling microalgal cultivation to industrial processes such as wastewater treatment. In this study, we have examined the biomass and lipid productivity characteristics of 14 microalgae isolates (Chlorophyta) from the Canadian province of Saskatchewan. Under both photoautotrophic and mixotrophic cultivation, a distinct linear trend was observed between biomass and lipid productivities in the 14 SK isolates. The most productive strain under cultivation in TAP media was Scenedesmus sp.-AMDD which displayed rates of biomass and fatty acid productivities of 80 and 30.7?mg?L^?1?day^?1, respectively. The most productive strain in B3NV media was Chlamydomonas debaryana-AMLs1b which displayed rates of biomass and fatty acid productivities of 51.7 and 5.9?mg?L^?1?day^?1, respectively. In 11 of the isolates tested, secondary municipal wastewater (MCWW) supported rates of biomass productivity between 21 and 33?mg?L^?1?day^?1 with Scenedesmus sp.-AMDD being the most productive. Three strains, Chlamydomonas debaryana-AMB1, Chlorella sorokiniana-RBD8 and Micractinium sp.-RB1b, showed large increases in biomass productivity when cultivated mixotrophically in MCWW supplemented with glycerol. High relative oleic acid content was detected in 10 of the 14 isolates when grown mixotrophically in media supplemented with acetate. There was no detectable effect on the fatty acid profiles in cells cultivated mixotrophically in glycerol-supplemented MCWW. These data indicate that biomass and lipid productivities are boosted by mixotrophic cultivation. Exploiting this response in municipal wastewater is a promising strategy for the production of environmentally sustainable biofuels.     

Evidence that UV-B tolerance of the photosynthetic apparatus in microalgae is related to the D1-turnover mediated repair cycle in vivo

The present study was conceived to elucidate the potential importance of the D1 turnover-mediated repair mechanism in UV-B tolerance of the photosynthetic apparatus in microalgae. To this end, the lab-identified UV-B sensitive and tolerant species of Chlorophyte and Chromophyte algae was used to examine photosynthetic response to UV-B exposure in the presence vs. the absence of streptomycin, an inhibitor of chloroplast protein synthesis. Measurements of photosynthetic O₂ evolution capacity and chlorophyll fluorescence parameters (F_v/F_m, Φ_PSII) illustrated species-specific UV-B sensitivity of the photosynthetic apparatus. Addition of the inhibitor streptomycin caused significant enhancements of UV-B-caused depression of photosynthesis in UV-B tolerant species, while little effect was observed in the sensitive species. In the tolerant species, recovery from UV-B induced 20 percnt; decline in F_v/F_m reached completion within 2 hours, much faster than that in the sensitive species. Immunoblotting revealed that exposure to UV-B radiation caused substantial degradation of the D1 protein in the sensitive Heterococcus brevicellularis, which was little enhanced by addition of the inhibitor. The same UV-B exposure lead to less D1 degradation in the tolerant Scenedesmus sp., which was significantly enhanced by addition of the inhibitor. This study shows that UV-B tolerance of the photosynthetic apparatus in microalgae was associated with a strong capacity for recovery from the UV-B-induced damage and this capacity related to the D1 turnover-mediated repair cycle, and largely determined UV-B tolerance of the photosynthetic apparatus in these organisms.     

High biomass production and CO<Subscript>2</Subscript> fixation from biogas by <Emphasis Type="Italic">Chlorella</Emphasis> and <Emphasis Type="Italic">Scenedesmus</Emphasis> microalgae using tequila vinasses as culture medium

Tequila vinasses (TVs) generated during Tequila production are brown liquid residues rich in nutrients. The nutrient content of agro-industrial effluents represents an excellent resource to support low-cost biomass production of microalgae; nonetheless, it is crucial to select the suitable microalgal strain to attain the highest biomass production in each residue used. In this study, biomass production, CO₂ fixation from biogas, and cell compound accumulation by Chlorella vulgaris U162, Chlorella sp., Scenedesmus obliquus U169, and Scenedesmus sp. using biodigested and filtered TVs as culture medium were evaluated and compared with the conventional microalgal culture media, C30, BG-11, Bold 3N, and Bristol. The four microalgae evaluated attained the highest biomass production and CO₂ fixation rate cultured in both residues, accumulating mainly carbohydrates and proteins although the most appropriate microalga to be cultured in TVs was Chlorella sp., recording 2.30 g L^?1. Moreover, the nutrient ratio of filtered TVs was ideal to support biomass production while biodigested TVs need to be supplemented with nitrogen. Overall, these results demonstrated that tequila vinasses are an excellent resource to support high and quick biomass production of microalgae, which can be used to obtain biofuels as ethanol, biogas, and supplement food depicting an extra benefit during the appropriate disposal of this residue.     

Low-cost cultivation of <Emphasis Type="Italic">Scenedesmus</Emphasis> sp. with filtered anaerobically digested piggery wastewater: biofuel production and pollutant remediation

A laboratory study was conducted on biomass and lipid production by Scenedesmus sp. and the removal of total nitrogen (TN) and total phosphorus (TP) from filtered anaerobically digested piggery wastewater. The dry weight (DW), lipid content and productivity, total nitrogen, and total phosphorus removal rate were assessed in five media: modified soil extract (MSE) medium, 5 % anaerobic digested wastewater (ADWW), 10 % ADWW, 15 % ADWW, and 5 % ADWW supplemented with NaNO₃. The highest biomass productivity appeared in the 15 % ADWW group, which was 20.4 % higher than MSE group. The highest lipid content was found in the 5 % ADWW group (31.60 %), while the highest lipid productivity was in the 10 % ADWW group (27.01 mg L^?1 day^?1). Compared with the 5 % ADWW group, the 5 % ADWW group supplemented with NaNO₃ had a similar biomass amount but lower lipid content and productivity. The fatty acids percentage of Scenedesmus sp. showed a slight difference in different media, but with the four dominant fatty acids (C16:0, C18:1, C18:2, C18:3) accounting for 87 % of the total fatty acids, suggests that Scenedesmus sp. in ADWW medium was no different than MSE in terms of lipid composition and content. TN removal rates were 82.85, 82.51, 85.85, 91.28, and 78.71 % in groups 1 to 5, and TP removal rates were 53.05, 88.53, 87.77, 88.72, and 80.64 %. Our experiment also shows the feasibility of using ADWW as a substitute of all the elements of MSE medium except for carbon, which would significantly reduce the costs of microalgal culture.     

Microalgae for phosphorus removal and biomass production: a six species screen for dual‐purpose organisms

Microalgae biofuel production can be feasible when a second function is added, such as wastewater treatment. Microalgae differ in uptake of phosphorus (P) and growth, making top performer identification fundamental. The objective of this screen was to identify dual‐purpose candidates capable of high rates of P removal and growth. Three freshwater – Chlorella sp., Monoraphidium minutum sp., and Scenedesmus sp. – and three marine – Nannochloropsis sp., N. limnetica sp., and Tetraselmis suecica sp. – species were batch cultured in 250 mL flasks over 16 days to quantitate total phosphorus (TP) removal and growth as a function of P loads (control, and 5, 10, and 15 mg L^?1 enrichment of control). Experimental design used 100 μmol m^?2 s^?1 of light, a light/dark cycle of 14/10 h, and no CO₂ enrichment. Phosphorus uptake was dependent on species, duration of exposure, and treatment, with significant interaction effects. Growth was dependant on species and treatment. Not all species showed increased P removal with increasing P addition, and no species demonstrated higher growth. Nannochloropsis sp and N. limnetica sp. performed poorly across all treatments. Two dual‐purpose candidates were identified. At the 10 mg L^?1 treatment Monoraphidium minutum sp. removed 67.1% (6.66 mg L^?1 ± 0.60 SE) of TP at day 8, 79.3% (7.86 mg L^?1 ± 0.28 SE) at day 16, and biomass accumulation of 0.63 g L^?1 ± 0.06 SE at day 16. At the same treatment Tetraselmis suecica sp. removed 79.4% (6.98 mg L^?1 ± 0.24 SE) TP at day 8, 83.0% (7.30 mg L^?1 ± 0.60 SE) at day 16, and biomass of 0.55 g L^?1 ± 0.02 SE at day 16. These species merit further study using high‐density wastewater cultures and lipid profiling to assess suitability for a nutrient removal and biomass/biofuel production scheme.     

Unveiling antimicrobial activity of microalgae Chlorella sorokiniana (UKM2), Chlorella sp. (UKM8) and Scenedesmus sp. (UKM9)

Microalgae represent promising sources of bioactive compounds for pharmaceutical and industrial applications. The emergence of antibiotic resistant bacteria leads to the need to explore new cost-effective, safe, and potent bioactive compounds from the microalgae. This study aimed to investigate the potential of local microalgae for their antimicrobial properties and bioactive compounds. Three local microalgae namely Chlorella sorokiniana (UKM2), Chlorella sp. UKM8, and Scenedesmus sp. UKM9 biomass methanol extracts (ME) were prepared and tested against Gram-positive and Gram-negative bacteria. Chlorella sp. UKM8-ME showed the highest antibacterial activity. UKM8-ME minimum inhibitory concentrations were in the range of 0.312 to 6.25 mg/mL. Cytotoxicity evaluation using MTT assay showed that the microalgae methanolic extracts did not exhibit cytotoxicity against Vero-cells. The UKM8-ME was mainly containing 28 compounds from the Gas Chromatography-Mass Spectrometry (GC–MS) analysis. Major compounds of UKM8-ME included phenol (18.5%), hexadecanoic acid (18.25%), phytol (14.43%), 9,12-octadecadienoic acid (13.69%), and bicyclo[3.1.1]heptane (7.23%), which have been previously described to possess antimicrobial activity. Hence, Chlorella sp. (UKM8) methanol extracts showed promising antibacterial activity. More comprehensive studies are required to purify these antimicrobial compounds and develop our understanding on their mechanism in UKM8-ME to unleash their specific potential.     

Local bioprospecting for high-lipid producing microalgal strains to be grown on concentrated municipal wastewater for biofuel production

Mass cultivation of microalgae for biofuel production depends heavily on the performance of the microalgae strains used. In this study, 60 algae-like microorganisms collected from different sampling sites in Minnesota were examined using multi-step screening and acclimation procedures to select high-lipid producing facultative heterotrophic microalgae strains capable of growing on concentrated municipal wastewater (CMW) for simultaneous energy crop production and wastewater treatment. Twenty-seven facultative heterotrophic microalgae strains were found, among which 17 strains were proved to be tolerant to CMW. These 17 top-performing strains were identified through morphological observation and DNA sequencing as Chlorella sp., Heynigia sp., Hindakia sp., Micractinium sp., and Scenedesmus sp. Five strains were chosen for other studies because of their ability to adapt to CMW, high growth rates (0.455-0.498 d⁻¹) and higher lipid productivities (74.5-77.8 mg L⁻¹ d⁻¹). These strains are considered highly promising compared with other strains reported in the literature.     

Novel approach for the development of axenic microalgal cultures from environmental samples

We demonstrated a comprehensive approach for development of axenic cultures of microalgae from environmental samples. A combination of ultrasonication, fluorescence‐activated cell sorting (FACS), and micropicking was used to isolate axenic cultures of Chlorella vulgaris Beyerinck (Beijerinck) and Chlorella sorokiniana Shihira & R.W. Krauss from swine wastewater, and Scenedesmus sp. YC001 from an open pond. Ultrasonication dispersed microorganisms attached to microalgae and reduced the bacterial population by 70%, and when followed by cell sorting yielded 99.5% pure microalgal strains. The strains were rendered axenic by the novel method of micropicking and were tested for purity in both solid and liquid media under different trophic states. Denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene confirmed the absence of unculturable bacteria, whereas fluorescence microscopy and scanning electron microscopy (SEM) further confirmed the axenicity. This is the most comprehensive approach developed to date for obtaining axenic microalgal strains without the use of antibiotics and repetitive subculturing.