Biological kinetics evaluation of anaerobic stabilization pond treatment of palm oil mill effluent

Biological kinetic (bio-kinetic) study of the anaerobic stabilization pond treatment of palm oil mill effluent (POME) was carried out in a laboratory anaerobic bench scale reactor (ABSR). The reactor was operated at different feed flow-rates of 0.63, 0.76, 0.95, 1.27, 1.9 and 3.8 l of raw POME for a day. Chemical oxygen demand (COD) as influent substrates was selected for bio-kinetic study. The investigation showed that the growth yield (Y_G), specific biomass decay (b), maximum specific biomass growth rate (μ_max), saturation constant (K_s) and critical retention time (Θ_c) were in the range of 0.990 g VSS/g COD_removed day, 0.024 day⁻¹, 0.524 day⁻¹, 203.433 g COD l⁻¹ and 1.908 day, respectively.     

Cellulase production from palm oil mill effluent in Malaysia: Economical and technical perspectives

The demand for cellulases has increased tremendously over the last few decades. This is due to its numerous applications in industry and also because it can be used to hydrolyze cellulosic materials into sugars that can be fermented into bioethanol and bio‐based products. This does not only open up a big and significant market for cellulases, but also provides another source of biofuel and bioenergy in the future. Nevertheless, the cost of the existing substrates for cellulase fermentation is very high if required for large‐scale production. Sustainable supplies and an economically feasible biomass are needed to reduce the cost of cellulase production. Palm oil mill effluent (POME) is rich in carbohydrates, proteins, nitrogenous compounds, lipids, minerals, cellulose, hemicelluloses and lignin. It can be used naturally as a fermentation medium, either for cellulase or other value‐added product fermentation. In Malaysia, a large and continually increasing amount of POME is produced every year because of the high global demand for palm oil. Hence, the development of cellulase production from POME is reviewed, covering the POME production, cellulase production and the major challenges together with the future prospects of these processes.     

Improvement of production of citric acid from oil palm empty fruit bunches: Optimization of media by statistical experimental designs

A sequential optimization based on statistical design and one-factor-at-a-time (OFAT) method was employed to optimize the media constituents for the improvement of citric acid production from oil palm empty fruit bunches (EFB) through solid state bioconversion using Aspergillus niger IBO-103MNB. The results obtained from the Plackett–Burman design indicated that the co-substrate (sucrose), stimulator (methanol) and minerals (Zn, Cu, Mn and Mg) were found to be the major factors for further optimization. Based on the OFAT method, the selected medium constituents and inoculum concentration were optimized by the central composite design (CCD) under the response surface methodology (RSM). The statistical analysis showed that the optimum media containing 6.4% (w/w) of sucrose, 9% (v/w) of minerals and 15.5% (v/w) of inoculum gave the maximum production of citric acid (337.94 g/kg of dry EFB). The analysis showed that sucrose (p < 0.0011) and mineral solution (p < 0.0061) were more significant compared to inoculum concentration (p < 0.0127) for the citric acid production.     

Optimization of novel halophilic lipase production by Fusarium solani strain NFCCL 4084 using palm oil mill effluent

Among different sources of lipases, fungal lipases have continued to attract a wide range of applications. Further, halophilic lipases are highly desirable for biodiesel production due to the need to mitigate environmental pollution caused as result of extensive use of fossil fuels. However, currently, the high production cost limits the industrial application of lipases. In order to address this issue, we have attempted to optimize lipase production by Fusarium solani NFCCL 4084 and using palm oil mill effluent (POME) based medium. The production was optimized using a combinatory approach of Plackett-Burman (PB) design, one factor at a time (OFAT) design and face centred central composite design (FCCCD). The variables (malt extract, (NH₄)₂SO₄, CaCl₂, MgSO₄, olive oil, peptone, K₂HPO₄, NaNO₃, Tween-80, POME and pH) were analyzed using PB design and the variables with positive contrast coefficient were found to be K₂HPO₄, NaNO₃, Tween-80, POME and pH. The significant variables selected were further analyzed for possible optimum range by using OFAT approach and the findings revealed that K₂HPO₄, NaNO₃, and Tween-80 as the most significant medium components, and thus were further optimized by using FCCCD. The optimum medium yielded a lipase with an activity of 7.8 U/ml, a significant 3.2-fold increase compared to un-optimized medium. The present findings revealed that POME is an alternative and suitable substrate for halophilic lipase production at low cost. Also, it is clearly evident that the combinatory approach employed here proved to be very effective in producing high activity halophilic lipases, in general.     

Renewable and sustainable bioenergies production from palm oil mill effluent (POME): win-win strategies toward better environmental protection

Palm oil industry is one of the leading agricultural industries in Malaysia with average crude palm oil production of more than 13 million tonne per year. However, production of such huge amount of crude palm oil has consequently resulted to even larger amount of palm oil mill effluent (POME). POME is a highly polluting wastewater with high chemical oxygen demand (COD) and biochemical oxygen demand (BOD) in which can caused severe pollution to the environment, typically pollution to water resources. On the other hand, POME was identified as a potential source to generate renewable bioenergies such as biomethane and biohydrogen through anaerobic digestion. In other words, a combination of wastewater treatment and renewable bioenergies production would be an added advantage to the palm oil industry. In line with the world's focus on sustainability concept, such strategy should be implemented immediately to ensure palm oil is produced in an environmental friendly and sustainable manner. This review aims to discuss various technologies to convert POME to biomethane and biohydrogen in a commercial scale. Furthermore, discussion on using POME to culture microalgae for biodiesel and bioethanol production was included in the present paper as a new remedy to utilize POME with a greater beneficial return.     

Phytoremediation of palm oil mill secondary effluent (POMSE) by Chrysopogon zizanioides (L.) using artificial neural networks

Artificial neural networks (ANNs) have been widely used to solve the problems because of their reliable, robust, and salient characteristics in capturing the nonlinear relationships between variables in complex systems. In this study, ANN was applied for modeling of Chemical Oxygen Demand (COD) and biodegradable organic matter (BOD) removal from palm oil mill secondary effluent (POMSE) by vetiver system. The independent variable, including POMSE concentration, vetiver slips density, and removal time, has been considered as input parameters to optimize the network, while the removal percentage of COD and BOD were selected as output. To determine the number of hidden layer nodes, the root mean squared error of testing set was minimized, and the topologies of the algorithms were compared by coefficient of determination and absolute average deviation. The comparison indicated that the quick propagation (QP) algorithm had minimum root mean squared error and absolute average deviation, and maximum coefficient of determination. The importance values of the variables was included vetiver slips density with 42.41%, time with 29.8%, and the POMSE concentration with 27.79%, which showed none of them, is negligible. Results show that the ANN has great potential ability in prediction of COD and BOD removal from POMSE with residual standard error (RSE) of less than 0.45%.     

Isolation and selection of cellulolytic fungi from palm oil mill effluent

Cellulolytic fungi, 34 strains, were isolated from samples taken from palm oil mill residues and effluent, and high cellulase producers selected in comparison with nine known reference strains. Although 13 isolates showed good filter paper distintegration within 14 days, only eight isolates exhibited clearing zones around their colonies on carboxymethylcellulose (CMC) agar medium. Quantitative cellulase activity measurements, using CMC as carbon source, selected three of the eight isolates as potential cellulase producers. Using dried palm oil mill condensate as carbon source, only one of the isolates (F 11) showed similar results on both carbon sources. During media optimization for CMCase production, a four-fold increase from 0.058 to 0.275 U/ml was obtained using a medium, containing 0.1% (v/v) Tween 80 0.02% (w/v) NH₄NO₃, 0.025% (w/v) proteose-peptone and 0.1% (w/v) CMC dissolved in undiluted condensate from the sterilization of oil palm bunches, with an initial pH of 5.5.     

A holistic approach to managing palm oil mill effluent (POME): biotechnological advances in the sustainable reuse of POME

During the last century, a great deal of research and development as well as applications has been devoted to waste. These include waste minimization and treatment, the environmental assessment of waste, minimization of environmental impact, life cycle assessment and others. The major reason for such huge efforts is that waste generation constitutes one of the major environmental problems where production industries are concerned. Until now, an increasing pressure has been put on finding methods of reusing waste, for instance through cleaner production, thus mirroring rapid changes in environmental policies. The palm oil industry is one of the leading industries in Malaysia with a yearly production of more than 13 million tons of crude palm oil and plantations covering 11% of the Malaysian land area. However, the production of such amounts of crude palm oil result in even larger amounts of palm oil mill effluent (POME), estimated at nearly three times the quantity of crude palm oil. Normally, POME is treated using end-of-pipe processes, but it is worth considering the potential value of POME prior to its treatment through introduction of a cleaner production. It is envisaged that POME can be sustainably reused as a fermentation substrate in the production of various metabolites, fertilizers and animal feeds through biotechnological advances. The present paper thus discusses various technically feasible and economically beneficial means of transforming the POME into low or preferably high value added products.     

Utilisation of fruits waste for citric acid production by solid state fermentation

A solid state fermentation method was used to utilise pineapple, mixed fruit and maosmi waste as substrates for citric acid production using Aspergillus niger DS 1. Experiments were carried out in the presence and absence of methanol at different moisture levels. In the absence of methanol the maximum citric acid was obtained at 60% moisture level whereas in the presence of methanol the maximum citric acid was obtained at 70% moisture level. The stimulating effect of methanol was less at lower moisture level. The inhibitory effect of metal ions was also not observed and maximum citric acid yield of 51.4, 46.5 and 50% (based on sugar consumed) was obtained from pineapple, mixed fruit and maosmi residues, respectively.     

A novel Ganoderma lucidum G0119 fermentation strategy for enhanced triterpenes production by statistical process optimization and addition of oleic acid

A novel enhanced triterpenes fermentation production process by Ganoderma lucidum G0119 with the addition of oleic acid in the medium has been developed and optimized. All of the six exogenous additives tested were found to exhibit stimulatory effect on mycelial growth and triterpenes biosynthesis by G. lucidum. The results show that oleic acid addition had significant role in promoting triterpenes production. The optimal concentration and time of oleic acid addition were determined to be 30 mL/L and 0 h, respectively. Furthermore, three significant factors influencing triterpenes production were identified as glucose, magnesium sulfate and temperature using the Plackett–Burman design. The optimized conditions by central composite design were 27.83 g/L glucose, 1.32 g/L magnesium sulfate, 26.2°C temperature. The triterpenes fermentation yield with the optimized medium based on actual confirmatory experimental data in 6 L fermentor was 1.076 g/L versus the statistical model predicted value of 1.080 g/L. Our innovatively developed triterpenes fermentation production technology and process has been proven to produce high triterpenes productivity and yield conceivably useful for industrial production.