Dynamically Tunable Plasmon-induced Transparency in a T-shaped Cavity Waveguide Based on Bulk Dirac Semimetals

We propose a dynamically tunable surface plasmon polaritons (SPPs) waveguide system based on bulk Dirac semimetals (BDS) containing only a side-coupled T-shaped cavity. Plasmon-induced transparency (PIT) is achieved in the terahertz band by introducing a position offset. We have analytically investigated the spectral characteristics of PIT in this system, indicating that the larger the position offset, the higher the peak of the PIT window. The spectrum responses of PIT system can be flexibly regulated via transforming the geometric parameters of the structure. At the same time, it is particularly sensitive to the refractive index of the surrounding medium, which is promising for sensing devices. In addition, the resonance frequency and peak transmission can be actively adjusted by controlling the Fermi energy of the BDS without reconstructing the geometric structure. Moreover, the optical delay time near the PIT peak reaches 11.001 ps, which has good slow-light characteristics and is a candidate in the field of slow-light equipment. The structure we designed may have potential application value in the design of SPPs light-guide devices.

     

A Tunable Slow Light Device with Multiple Channels Based on Plasmon-Induced Transparency

Slow light devices with buffering capability play a critical role in all-optical signal processing. In this paper, multiple slow light phenomena are implemented based on plasmon-induced transparency (PIT) in our device. The device mainly consists of dual tooth cavities coupled with stub resonators, respectively. Temporal coupled-mode theory model illustrates that the triple PIT phenomena can be achieved based on different formation mechanisms. The simulation results calculated by the finite-difference time-domain method reveal that significant slow light response occurs at two wavelength regions. In addition, the parameters of structure have an important influence on PIT response and slow light characteristics. Moreover, the separate manipulation of wavelength, transmission and group index at transparency peak can be achieved in different slow light channels by adjusting the structural parameters. This plasmonic device is of great significance for the design of optical networks on chips.

     

Ultra-high Sensitivity Plasmonic Nanosensor Based on Multiple Fano Resonance in the MDM Side-Coupled Cavities

We propose a compact plasmonic structure comprising a metal-dielectric-metal (MDM) waveguide coupled with a side cavity and groove resonators. The proposed system is investigated by the finite element method. Simulation results show that the side-coupled cavity supports a local discrete state and the groove provides a continuous spectrum, the interaction between them, gives rise to the Fano resonance. The asymmetrical line shape and the resonant wavelength can be easily tuned by changing the geometrical parameters of the structure. Moreover, we can extend this plasmonic structure by the double side-coupled cavities to gain the multiple Fano resonances. The proposed structure can serve as an excellent plasmonic sensor with a sensitivity of ～1900 nm/RIU and a figure of merit of about ～3.8?×?10⁴, which can find wide applications for nanosensors.     

Ultrasensitive and Tunable Sensor Based on Plasmon-Induced Transparency in a Black Phosphorus Metasurface

We propose an ultrasensitive and tunable mid-infrared sensor based on plasmon-induced transparency (PIT) in a monolayer black phosphorus metasurface. Results show that there are two PIT windows, each of which occurs when the long axis of the metasurface is placed along the MBP’s armchair and zigzag crystal directions, respectively. The corresponding sensors based on these PIT effects show high sensitivities of 7.62 THz/RIU and 7.36 THz/RIU. Both PIT frequencies can be tuned statically by varying the geometric parameters or dynamically by changing the electron doping of monolayer black phosphorus, making the sensors adaptable to tackle with a variety of scenarios. We expect that this work will advance the engineering of metasurfaces based on monolayer black phosphorus and promote their sensing applications.

     

Dynamically Tunable by Kerr Effect Multichannel Filter Based on Plasmon Induced Transparencies at Optical Communication Range

Dynamically tunable multichannel filter based on plasmon-induced transparencies (PITs) is proposed in a plasmonic waveguide side-coupled to slot and rectangle resonators system at optical communication range. The slot and rectangle resonators in this system can be regarded as radiative or dark resonators as same as the radiative or dark elements in the metamaterial structure with the help of the evanescent coupling. The multiple PIT responses which can enable the realization of nanoscale filter with four channels are originated from the direct near-field coupling and indirect phase couple through a plasmonic waveguide simultaneously. Moreover, the magnitudes and bandwidths of the filter can be efficiently tuned by controlling of the geometric parameters such as the coupling distances and the pump light-induced refractive index change of the Kerr material which is embedded into the metal-dielectric-metal waveguide between the radiative resonators.     

Plasmon-Induced Transparency and Refractive Index Sensing Based on a Trapezoid Cavity Coupled with a Hexagonal Resonator

Plasmonics - Tunable plasmon-induced transparency (PIT) effect is studied in a plasmonic device on the basis of the metal-insulator-metal (MIM) structure which consists of trapezoid and hexagonal...     

Tunable Plasmonically Induced Transparency with Asymmetric Multi-rectangle Resonators

Plasmonically induced transparency (PIT) effect in a metal–insulator–metal waveguide coupled to asymmetric multi-rectangle resonators is investigated numerically. By adjusting parameters of resonators, we cannot only realize single, double, or treble PIT peaks in the compact structure, but also induce an off-to-on PIT optical response. Numerical simulation by finite element method was conducted to verify our designs. This proposed structure, hence has potential applications for ultra-compact optoelectronic devices at communication band.

     

Dynamically Switchable Multispectral Plasmon-Induced Transparency in Stretchable Metamaterials

We propose dynamically switchable multispectral plasmon-induced transparency (PIT) with high modulation depth in a three-dimensional metamaterial standing on a flexible substrate. The proposed metamaterial is composed of a pair of metal–insulator–metal (MIM) nano-cut-wires and a pair of insulator–metal–insulator (IMI) nano-cut-wires. Results show that two PIT windows can be achieved because of the near-field coupling between the dipole supported by the IMI nano-cut-wire and two quadrupoles supported by the MIM structures. These two PIT windows can be blue-shifted or even flipped over by stretching the substrate along one direction, or be switched off by stretching along the other direction. A classical coupled oscillator model is developed to quantitatively describe and explain these results. We expect this work will find promising applications in multispectral sensors, slow light devices and nonlinear optical devices.

     

Quantized Water Clusters Around Apolar Molecules

Abstract

In order to understand the mechanism of gas hydrate kinetics and to explore the existance of other new cavities in the hydrate structure, we have used Molecular Dynamics (MD) simulation to study a system comprising two Lennard-Jones particles and 214 water molecules. Equilibrium structure and properties of twelve cases have been investigated. Our findings were as follows: ? Apolar molecules promote spherical liquid water clusters in a hydrate-like labile cavity.

? The size of the cavity and the coordination number is dependent upon the size of the apolar molecule.

? The coordination number of water molecules is quantized in jumps of four.

? Similarities are observed between the labile cavities and cavities in solid hydrates and in other chemical structures such as Buckminsterfullerene.

? Such a simulation procedure suggests the possibility of other clusters which may exist in yet-to-be-found hydrates. A separate question involves whether such suggested cavities can be combined with other cavities into a space-filling crystal.

     

High Sensitivity Nanoplasmonic Sensor Based on Plasmon-Induced Transparency in a Graphene Nanoribbon Waveguide Coupled with Detuned Graphene Square-Nanoring Resonators

A novel nanoscale structure for high sensitivity sensing which consists of a graphene nanoribbon waveguide coupled with detuned graphene square-nanoring resonators (GSNR) based on edge mode is investigated in detail. By altering the Fermi energy level of the graphene, the plasmon-induced transparency (PIT) window from the destructive interference between a radiative square-nanoring resonator and a dark square-nanoring resonator can be easily tailored. The coupled mode theory (CMT) is used to show that the theoretical results agree well with the finite difference time domain (FDTD) simulations. This nanosensor yields a ultrahigh sensitivity of ∼2600 nm/refractive index unit (RIU) and a figure of merit (FOM) of ∼54 in the mid-infrared (MIR) spectrum. The revealed results indicate that the Fermi energy level of the graphene and the coupling distance play important roles in optimizing the sensing properties. Our proposed structure exerts a peculiar fascination on the realization of ultra-compact graphene plasmonic nanosensor in the future.

     

Broadband Plasmon-Induced Transparency in Plasmonic Metasurfaces Based on Bright-Dark-Bright Mode Coupling

Plasmon-induced transparency (PIT), an analog of electromagnetically induced transparency, originates from destructive interference of plasmonic resonators with different quality factors and brings about the extreme dispersion within the narrow transparency window, promising remarkable potential for slow light, nonlinear optics and biochemical sensors. However, sometimes a broad transmission frequency band is more desirable for other applications such as bandpass filters. In general, strong coupling between bright and dark plasmon modes in coupled resonant systems leads to wide transparency bandwidth at the PIT resonance. Based on multi-oscillator coupling theory, a metasurface structure consisting of three perpendicularly connected metallic nanobars is purposefully designed and numerically demonstrated to support broadband PIT spectral response. The near-field patterns indicate that the broadening of the transparent band results from the constructive interference of dual excitations of the single non-radiative (dark) resonator by the two radiative (bright) antennas. These results show that this scheme of bright-dark-bright mode coupling is significantly beneficial for designing filters operating over a broad frequency range.

     

Perfect Plasmon-Induced Absorption and Its Application for Multi-Switching in Simple Plasmonic System

Plasmonics - The perfect plasmon-induced absorption (PIA) effect is achieved in a simple plasmonic system, composed of two rectangle cavities side-coupled to the metal-insulator-metal (MIM)...     

Coupled-Resonator-Induced Fano Resonances for Plasmonic Sensing with Ultra-High Figure of Merits

Fano resonances are numerically predicted in an ultracompact plasmonic structure, comprising a metal-isolator-metal (MIM) waveguide side-coupled with two identical stub resonators. This phenomenon can be well explained by the analytic model and the relative phase analysis based on the scattering matrix theory. In sensing applications, the sensitivity of the proposed structure is about 1.1?×?10³ nm/RIU and its figure of merit is as high as 2?×?10⁵ at λ?=?980 nm, which is due to the sharp asymmetric Fano line-shape with an ultra-low transmittance at this wavelength. This plasmonic structure with such high figure of merits and footprints of only about 0.2 μm² may find important applications in the on-chip nano-sensors.     

Structure of Multiple Fano Resonances in Double-baffle MDM Waveguide Coupled Cascaded Square Cavity for Application of High Throughput Detection

A structure of double-baffle metal-dielectric-metal (MDM) waveguide coupled cascaded square cavity is designed based on the transmission characteristics of the surface plasmon polaritons. Combined with coupled mode theory (CMT), the mechanism of multiple Fano resonances generated by this structure is analyzed qualitatively. The wide-band spectrum mode generated by the F-P resonant cavity and the four narrow-band spectrum modes produced by the cascaded square resonant cavities interfere with each other. Moreover, an new scheme of introducing a semiconductor material InGaAsP into this structure is designed for improving the transmittance of the Fano peaks. Analyze the influence of refractive indexes of the test objects on sensing performance by finite element method (FEM) quantitatively, which shows the improved structure can achieve the independent tuning of multiple Fano resonances. Combining with 96-well microplate technology, the structure can achieve the detection of multiple different samples with high-performance simultaneously. It is believed that the proposed structure has a strong reference significance for the design of optical micro-nanostructures for high throughput detection.

     

A test of non‐kin social foraging in the southern flying squirrel (Glaucomys volans)

It can be challenging to understand the evolution of sociality, particularly the occurrence of co‐operation by non‐kin. Southern flying squirrels (Glaucomys volans) are an interesting example of non‐kin co‐operation because of the mutual benefits obtained by social thermoregulation during winter. Because group survival confers benefits to the entire group, flying squirrels may also follow an aggregation economy, whereby co‐operative foraging during winter is advantageous. However, the extent of such social foraging in flying squirrels is unknown. We tested for social foraging of southern flying squirrels, and also for relatedness among foraging groups. To determine the structure of foraging groups, we set up and remotely monitored feeding stations and nest cavities. All squirrels at the study site were tagged with passive integrated transponder (PIT) tags and nests and feeding stations were monitored with automated PIT‐tag recorders for a 24‐month period. Squirrels were found most often foraging alone. Squirrels that were recorded foraging together comprised unrelated individuals that were also found to share nest cavities. Squirrels were also recorded travelling farther distances between nest cavity and feeding station in the winter season than in the summer season, suggesting that, during winter, squirrels trade‐off proximity to food caches for membership in a nest group. Our data suggest that squirrels forage and cache alone in their summer home range and make solitary returns to this summer range to collect their cache during the winter months, despite exhibiting social winter nesting. © 2014 The Linnean Society of London, Biological Journal of the Linnean Society, 2014, 113 , 1126–1135.     

A High Performance Plasmonic Sensor Based on Metal-Insulator-Metal Waveguide Coupled with a Double-Cavity Structure

A high performance plasmonic sensor based on a metal-insulator-metal (MIM) waveguide coupled with a double-cavity structure consisting of a side-coupled rectangular cavity and a disk cavity is proposed. The transmission characteristics of the rectangular cavity and disk cavity are analyzed theoretically and the improvements of performance for the double-cavity structure compared with a single cavity are studied. The influence of structural parameters on the transmission spectra and sensing performance are investigated in detail. A sensitivity of 1136 nm/RIU with a high figure of merit of 51,275 can be achieved at the resonant wavelength of 1148.5 nm. Due to the high performance and easy fabrication, the proposed structure may be applied in integrated optical circuits and on-chip nanosensors.     

No effect of passive integrated transponder tagging method on survival or body condition in a northern population of Black‐capped Chickadees (Poecile atricapillus)

Passive integrated transponder (PIT) tags allow a range of individual‐level data to be collected passively and have become a commonly used technology in many avian studies. Although the potential adverse effects of PIT tags have been evaluated in several species, explicit investigations of their impacts on small (<12 g) birds are limited. This is important, because it is reasonable to expect that smaller birds could be impacted more strongly by application of PIT tags. In this study, we individually marked Black‐capped Chickadees (Poecile atricapillus), a small (circa 10 g) passerine, at the University of Alberta Botanic Garden to evaluate potential lethal and sublethal effects of two PIT tagging methods: attachment to leg bands or subcutaneous implantation. We used a Cox proportional hazards model to compare the apparent survival of chickadees with leg band (N = 79) and implanted PIT tags (N = 77) compared with control birds that received no PIT tags (N = 76) over the subsequent 2 years based on mist net recaptures. We used radio‐frequency identification (RFID) redetections of leg band PIT tags to evaluate sex‐specific survival and increase the accuracy of our survival estimates. We also used a generalized linear regression model to compare the body condition of birds recaptured after overwintering with leg band PIT tags, implanted PIT tags, or neither. Our analysis found no evidence for adverse effects of either PIT tagging method on survival or body condition. While we recommend carefully monitoring study animals and evaluating the efficacy of different PIT tagging methods, we have shown that both leg band and subcutaneously implanted PIT tags ethical means of obtaining individualized information in a small passerine.     

Flat-Top Reflection Characteristics in Metal-Dielectric-Metal Plasmonic Waveguide Structure Side Coupled with Cascaded Double Cavities

Based on a metal-dielectric-metal (MDM) plasmonic waveguide side coupled with a single cavity, we rebuild such resonator system by cascading double side-coupled cavities to obtain flat-top reflection response over a frequency bandwidth. The increased coherent scattering path provides an additional freedom to engineer the complex interference between the cavity modes and the waveguide mode. By decomposing the compound cavity modes into two decoupled resonances, we analyze the conditions to realize flat-top reflection response. The physics behind the flat-top reflection characteristics is found to be originated from the interference interaction between the two cavities through examining the cavity excitations and the reflected power response. Temporal coupled-mode theory and finite difference time domain method are utilized as theoretical and numerical tools which convince each other.     

Evaluation of oxygen dependence on in vitro and in vivo cytotoxicity of photoimmunotherapy using IR-700–antibody conjugates

Photoimmunotherapy (PIT) using the near-infrared-absorbing photosensitizing phthalocyanine dye, IRDye 700DX (IR-700), conjugated with a tumor-targeting antibody such as panitumumab (Pan) has shown efficacy in in vitro studies and several preclinical models in mice with promise for clinical translation. PIT results in rapid necrotic cell death in vitro and tumor shrinkage in vivo. Photochemical studies with the Pan-IR-700 conjugate showed that this agent can support generation of singlet oxygen and also generate reactive oxygen species after exposure to near-infrared (NIR) light. Moreover, in vitro studies using A431 cells, singlet oxygen scavengers abrogated the efficacy of PIT with Pan-IR-700, while oxygen depletion to undetectable levels in the exposure chamber almost completely inhibited the cellular cytotoxicity of PIT. Survival of tumor bearing mice was prolonged in PIT-treated animals but mice whose tumors were made transiently hypoxic prior to PIT had no benefit from the treatment. The results from this study support a central role for molecular oxygen-derived species in cell death caused by PIT.     

The potential use of PIT telemetry for identifying and tracking crayfish in their natural environment

A method for tracking crayfish and other benthic animals in rivers and streams, based on passive integrated transponder (PIT) technology, using a portable detector was investigated. The effect of implanting crayfish with PIT tags and the efficiency of the PIT tag detector system at locating tags is described. In a laboratory study 30 signal crayfish Pacifastacus leniusculus (>33.7 mm carapace length) were internally implanted with PIT tags (12-mm long×2.1-mm diameter) and 30 crayfish matched for size and sex were kept as controls and maintained for 6 months. Tagging had no significant effect on survival, moulting or growth of crayfish, and tag retention was 100%. The reader unit consists of an antenna coil mounted on a pole and designed to be moved over the streambed to search for tagged crayfish. Efficiency testing indicated that more than 80% of tags were identified and located when hidden within different stream microhabitats.