Surface-Assisted Carrier Excitation in Plasmonic Nanostructures

We present a quantum-mechanical model for surface-assisted carrier excitation by optical fields in plasmonic nanostructures of arbitrary shape. We derive an explicit expression, in terms of local fields inside the metal structure, for surface absorbed power and surface scattering rate that determine the enhancement of carrier excitation efficiency near the metal-dielectric interface. We show that surface scattering is highly sensitive to the local field polarization and can be incorporated into metal-dielectric function along with phonon and impurity scattering. We also show that the obtained surface scattering rate describes surface-assisted plasmon decay (Landau damping) in nanostructures larger than the nonlocality scale. Our model can be used for calculations of plasmon-assisted hot carrier generation rates in photovoltaics and photochemistry applications.     

Far-Field Focusing of Spiral Plasmonic Lens

In this paper, we study the nanoscale-focusing effect in the far field for a spiral plasmonic lens with a concentric annular groove by using finite-difference time domain simulation. The simulation result demonstrates that a left-hand spiral plasmonic lens can concentrate an incident right-hand circular polarization light into a focal spot at the exit surface. And this spot can be focused into far field due to constructive interference of the scattered light by the annular groove. The focal length and the focal depth can be adjusted by changing the groove radius and number of grooves within a certain range. These properties make it possible to probe the signal of spiral plasmonic lens in far field by using conventional optical devices.     

Plasmonic Optical Properties and Applications of Metal Nanostructures

In this review article, we provide an overview of recent research activities in the study of plasmonic optical properties of metal nanostructures with emphasis on understanding the relation between surface plasmon absorption and structure. Both experimental results and theoretical calculations have indicated that the plasmonic absorption strongly depends on the detailed structure of the nanomaterials. Examples discussed include spherical nanoparticles, nanorods, nanowires, hollow nanospheres, aggregates, and nanocages. Plasmon–phonon coupling measured from dynamic studies as a function of particle size, shape, and aggregation state is also reviewed. The fascinating optical properties of metal nanostructures find important applications in a number of technological areas including surface plasmon resonance, surface-enhanced Raman scattering, and photothermal imaging and therapy. Their novel optical properties and emerging applications are illustrated using specific examples from recent literature. The case of hollow nanosphere structures is highlighted to illustrate their unique features and advantages for some of these applications.     

Plasmonic Properties of Gold Nanostructures on Gold Film

This paper reports on a systematic study of the plasmonic properties of periodic arrays of gold cylindrical nanoparticles in contact with a gold thin film. Depending on the gold film thickness, it observes several plasmon bands. Using a simple analytical model, it is able to assign all these modes and determine that they are due to the coupling of the grating diffraction orders with the propagating surface plasmons travelling along the film. With finite difference time domain (FDTD) simulations, it demonstrates that large field enhancement occurs at the surface of the nanocylinders due to the resonant excitation of these modes. By tilting the sample, it also observes the evolution of the spectral position of these modes and their tuning through nearly the whole visible range is possible. Such plasmonic substrates combining both advantages of the propagative and localised surface plasmons could have large applications in enhanced spectroscopies.

     

Subwavelength Focusing Using Plasmonic Wavelength-Launched Zone Plate Lenses

We propose a plasmonic wavelength-launched Fresnel zone plate structure for subwavelength focusing. The plasmonic structure consists of a central circular groove surrounded by 12 transparent and opaque zones. All the zones with widths smaller than one half of the incident wavelength are used to enhance the field of evanescent waves in the transmission. Based on the finite-difference time-domain analysis, a focus spot with a full-width at half-maximum of 270 nm (= 0.4λ _in ) can be achieved, accompanied by a largely reduced depolarization effect. The sharp waistline indicates that the surface waves are largely converged in the region of focus.     

Localized Surface Plasmon Resonances of Simple Tunable Plasmonic Nanostructures

Plasmonics - We derive and present systematic relationships between the analytical formulas for calculation of the localized surface plasmon resonances (LSPR) of some plasmonic nanostructures which...     

Plasmonic Nanostructures as Accelerators for Nanoparticles: Optical Nanocannon

We suggest a model of an optical structure that allows to accelerate nanoparticles to velocities on the order of tens of centimeters per second using low-intensity external optical fields. The nano-accelerator system employs metallic V-grooves which concentrate the electric field in the vicinity of their bottoms and creates large optical gradient forces for the nanoparticles in that groove. The conditions are found when this optical force tends to eject particles away from the groove.     

Plasmonic Property and Stability of Core-Shell Au@SiO2 Nanostructures

Au nanorod (Au NR) is one of the most studied colloidal nanostructures for its tunable longitudinal surface plasmon resonance (SPR_L) property in the near infrared region. And surface coating Au NRs into core-shell nanostructures is particularly important for further investigation and possible applications. In this paper, Au NRs colloids were synthesized using an improved seed method. Then as-prepared Au NRs were coated with SiO₂ to form a core-shell nanostructure (Au@SiO₂) with different shell thickness. And the influence of SiO₂ shell on the SPR_L of Au NRs was investigated based on the experimental results and FDTD simulations. Under the 808 nm laser irradiating, the stability of Au@SiO₂ was studied. Compared with Au NRs, the Au@SiO₂ is stable with increasing laser power (up to 8 W), whereas Au NRs undergo a shape deformation from rod to spherical nanoparticle when the laser power is 5 W. The high stability and tunable optical properties of core-shell structured Au@SiO₂, along with advantages of SiO₂, show that Au@SiO₂ composites are promising in designing plasmonic photothermal properties or further applications in nanomedicine.     

Experimental Investigation of Focusing of Gold Planar Plasmonic Lenses

To experimentally demonstrate the subwavelength focusing of depth-tuned or non-depth-tuned plasmonic lenses, we first designed this type of lens using diffraction-coupling-angle based method, then fabricated the structure in gold thin film with focused ion beam, and finally characterized its focusing behavior using near-field scanning optical microscope. It is found that this type of lens has a resolution limit on the focal plane due to the field represented by angular spectrum having a cut-off frequency, while at the near field the lens has sub-diffraction limit focusing capability due to the existence of high-angular-frequency components in the field.     

Orientation Effects on Plasmonic Heating of Near-Infrared Colloidal Gold Nanostructures

Plasmonics - Photothermal therapy assisted by plasmonic nanostructure relies on the absorption of light energy by the metallic nanoparticle. The manifestation of a rational use of...     

On the Plasmonic Properties of Ag@SiO2@Graphene Core-Shell Nanostructures

Plasmonics - This work reports on a study regarding the plasmonic properties of the Ag@SiO2@Graphene core-shell nanostructures, in the wavelength range of 0.3–2 μ m. Spherical and...     

Investigation of Physical Limits of Plasmonic Focusing Lens in Different Regions

We present theoretical studies of three regions for plasmonic focusing, which are surface plasmon-dominating, Fresnel, and Fraunhoffer regions. The boundaries of the three regions are defined and the physical behaviors of plasmonic lenses in terms of focal length and focus size in these regions are investigated. A plasmonic lens that renders a subdiffraction-limit focus in the Fresnel region is presented and the lens performance with respect to the design parameters is studied by using finite-difference time-domain simulations. This work can serve as a basis for understanding plasmonic-focusing phenomenon and designing plasmonic lenses for various applications.     

Luminescence Enhancement and SERS by Self-Assembled Plasmonic Silver Nanostructures in Nanoporous Glasses

It was shown experimentally that the action of continuous electric field on nanoporous silicate glasses with interconnecting pores, containing silver nanoparticles, leads to the spatial redistribution of nanoparticles. The concentration of nanoparticles near the negative electrode increases and results in silver nano- and microdendrite structure growth. The main mechanisms of the described effects are the field emission of silver ions from silver nanoparticles near negative electrode, migration of silver ions in the external electric field to the negative electrode, reduction of silver ions by free electrons, and new silver nanoparticle formation. The experiments have shown that at the ends of microdendrites, local field enhancement appears, which results in luminescence enhancement and in SERS.

     

Effects of Dielectric Anisotropy on Surface Plasmon Polaritons in Three-Layer Plasmonic Nanostructures

The effects of highly anisotropic dielectric on surface plasmon polaritons (SPPs) are investigated in several three-layer plasmonic nanostructures. Dispersion relations of SPPs in anisotropic-dielectric-metal (ADM), dielectric-anisotropic-metal (DAM), and metal-anisotropic-metal (MAM) structures are analytically derived. The numerical results in the visible indicate that, in ADM, the propagation length of a conductor-gap-dielectric mode is changed from 5.9 to 91 μm and its cutoff thickness from 83 to 7 nm with varying the optical axis, while in DAM, the influences of anisotropic dielectric are reversed on propagation length and cutoff thickness. In MAM, by tuning the optical axis, the light confinement of symmetry SPPs mode varies about 10 %. Further numerical calculations show that the above results induced by the anisotropy of dielectric can be extended to the telecommunication frequency. The improved mode properties may be used in plasmonic-based nanodevices and tunable single surface plasmon sources.     

Novel Apolar Plasmonic Nanostructures with Extended Optical Tunability for Sensing Applications

This paper outlines the design of complex nanostructures with apolar behavior which pave the way to a wider range of plasmon resonance tuning and applications requiring higher enhancement. These new nanostructure families are simply defined by symmetry considerations. An irreducible decomposition of optical response tensor demonstrates that nanoparticles which belong to C _n , with n?≥?3, symmetry point group for at least one scale have an optical response insensitive on the light polarization. This is experimentally confirmed by extinction and surface-enhanced Raman-scattering measurements.     

Geometry and Polarization Effects in Designing Metallic-Semiconductor Nanostructures for Plasmonic Hot Carrier Collection

Plasmonics - Hot carrier collection assisted with surface plasmon integrated with metallic-semiconductor nanostructures directs a way for direct photoelectric conversion, which could be utilized...     

Finite and Boundary Element Methods for Simulating Optical Properties of Plasmonic Nanostructures

In this study, a numerical investigation was done on the optical properties of silver nanostructures using the boundary element method (BEM) and finite element method (FEM). The BEM simulation was done using a freely available code called MNBEM in MATLAB with minor modifications. The FEM simulation was done by Comsol Multiphysics, a commercial software package. Silver nanostructures in the sphere, rod, and triangle geometries and the presence of different polarization angles were compared between these two methods. According to the obtained results, the absorption cross-sections for both BEM and FEM were consistent with their actual optical properties. For instance, both longitudinal and transverse resonance modes were observed in the case of nanorods, and all three in–plane dipole, in–plane quadrupole, and out–plane quadrupole plasmon resonances were observed successfully obtained for triangular nanostructures. Although both BEM and FEM results were similar to each other (from the number and position of the peaks in the final spectra), this similarity was decreased as the anisotropy was increased in the structure. For example, nearly 40 nm difference was observed between the BEM and FEM results in the triangular nanostructures, even though the trends and shape of the peaks were similar. It was revealed that specific points should be considered in the discretization process (especially the corner fillets) to close the gap in the obtained results from BEM and FEM. According to the obtained results, BEM significantly reduces the computational cost and time by discretizing only the boundary of the domain. A self-written software was developed to predict the optical cross-section of a plasmonic-ensemble consisting of spherical, rod-shaped, and triangular nanostructures, which can be used in different disciplines such as plasmon-enhanced solar cells, plasmon-enhanced photocatalysis, and plasmon-enhanced fluorescence.

Graphical Abstract

     

Multiple-Wavelength Focusing and Demultiplexing Plasmonic Lens Based on Asymmetric Nanoslit Arrays

A multiple-wavelength focusing and demultiplexing plasmonic lens based on asymmetric nanoslit arrays is designed. The nanoslit arrays are perforated in a gold film and act as metal–insulator–metal plasmonic waveguides. By manipulating the widths of the slit arrays, the plasmonic lens can concentrate two incident plane wave beams to two separated focal points corresponding to their wavelengths. The full wave simulation is performed to verify the designed lens. This work provides a way to design more compact and integrated wavelength-division multiplexing plasmonic devices for nanophotonic communication and spectral imaging.     

Experimental Study of Indirect Phase Tuning-Based Plasmonic Structures for Finely Focusing

Three types of indirect phase tuning-based plasmonic structures with subwavelength circular grooves/slits and/or central apertures corrugated on Au film supported by glass substrate: depth modulation, width modulation, and hybrid depth-width modulation, were put forth in this paper. They were investigated experimentally by means of nanofabrication and near-filed scanning optical microscope characterization. The plasmonic structures were fabricated using the technique of focused ion beam direct milling. Our experimental results demonstrated that all of the phase tuning-based structures have focusing functions. Both the width and depth modulation-based structures can realize beam focusing and produce an elongated depth of focus. Moreover, after comparison among these three structures, we found that the width modulation-based structure has the best focusing performance.