Iron containing keratinolytic metallo-protease produced by Chryseobacterium gleum

Chryseobacterium gleum exhibited complete dissolution of whole chicken-feathers (10 g l^?1, pH 8) after 72 h at 30 °C through synthesis of keratinolytic protease when inoculated at 1% (v/v). This enzyme was purified to 67-fold with yield of 2.25% having a specific activity of 1670 U mg^?1 and ～36 kDa Mw. MALDI-TOF MS of this keratinase showed some similarity with the keratinase peptides of Bacillus subtilis (BOFXJ2). The keratinase action was inhibited by EDTA, iodoacetamide and metal ions like mercury, copper and zinc (1 mM each), while it was enhanced by iron and calcium. Keratinase showed presence of 3 mM of Fe M^?1 as tested by atomic absorption spectroscopy and addition of Fe in its apoenzyme retained about 79% of original residual feather degradation activity which portrayed it to be metalloprotease. Purified keratinase revealed significant degradation (85%) of feather concentrate (20 g l^?1) to 3.9 μM ml^?1 of free amino groups in 24 h at an initial pH of 8.0, 30 °C and 120 rpm shaking. This keratinase activity can be controlled precisely by presence of chemical or metal ions which could be of use in biotechnology industry while the culture can be used in poultry waste management.     

Application of experimental designs to optimize medium composition for production of thermostable lipase/esterase by Geobacillus thermodenitrificans AZ1

Thirty two morphologically different bacterial were isolated from different soil samples and screened for their ability to produce lipolytic enzymes. Among all isolates, the isolate coded AZ1 was selected due to its high potency to produce lipase at elevated temperature up to 65 °C. Phylogenetic analysis based on 16SrDNA sequence revealed its close relationship to Geobacillus thermodenitrificans. The effect of ten culture variable on lipase production was evaluated by implementing Plackett–Burman statistical design. d-sucrose, peptone and soy bean flour were the most significant variables affecting lipase production. A pre-optimized medium based on this experiment yielded an enzyme activity of 260 U min^?1 ml^?1. For further optimization, a fourteen trials’ multi-factorial Box–Behnken experimental design was applied to find out the optimum level of each of the significant variables. The tested variables, namely: d-sucrose (X₁); peptone (X₂) and soy bean flour (X₃) were examined, each at three different levels coded ?1, 0, +1. The optimal levels of the three components were founded to be (g/L): d-sucrose, 6.56; peptone, 6.35; and soy bean flour, 6.92, with a predicted activity of approximately 610 U min^?1 ml^?1. According to the results of the Plackett–Burman and Box–Behnken designs the following medium composition is expected to be optimum (g/L): d-sucrose 6.56, peptone 6.35, soy bean flour 6.92, CaCl₂ 0.02, Y.E. 2.5, K₂HPO₄ 1.0, MgSO₄.7H₂O 0.2 and Fe₂ (SO₄)₃ 0.02; pH, 8; cultivation temperature 55 °C and incubation time 24 h, the enzyme activity measured in the medium was approximately 593 U min^?1 ml^?1.     

Response surface methodology: Synthesis of short chain fructooligosaccharides with a fructosyltransferase from Aspergillus aculeatus

A transferase was isolated, purified and characterised from Aspergillus aculeatus. The enzyme exhibited a pH and temperature optima of 6.0 and 60 °C, respectively and under such conditions remained stable with no decrease in activity after 5 h. The enzyme was purified 7.1 fold with a yield of 22.3% and specific activity of 486.1 U mg^?1 after dialysis, concentration with polyethyleneglycol (30%) and DEAE-Sephacel chromatography. It was monomeric with a molecular mass of 85 kDa and K_m and V_max values of 272.3 mM and 166.7 μmol min^?1 ml^?1. The influence of pH, temperature, reaction time, and enzyme and sucrose concentration on the formation of short-chain fructooligosaccharides (FOS) was examined by statistical response surface methodology (RSM). The enzyme showed both transfructosylation and hydrolytic activity with the transfructosylation ratio increasing to 88% at a sucrose concentration of 600 mg ml^?1. Sucrose concentration (400 mg ml^?1) temperature (60 °C), and pH (5.6) favoured the synthesis of high levels of GF₃ and GF₄. Incubation time had a critical effect on the yield of FOS as the major products were GF₂ after 4 h and GF₄ after 8 h. A prolonged incubation of 16 h resulted in the conversion of GF₄ into GF₂ as a result of self hydrolase activity.     

Expression and purification of recombinant feline interferon in the baculovirus-insect larvae system

Feline interferons (FeIFNs) are cytokines with antiviral, antitumor and immunomodulatory functions used as therapeutic agents in a variety of veterinary diseases. In this work, FeIFN-α7 and FeIFN-α7xArg containing eight residues of arginine were expressed in Sf9 cells and insect larvae. At 4 days post-infection (dpi), the concentrations of FeIFN-α7 and FeIFN-α7xArg in suspension culture were (1.28 ± 0.15) × 10⁶ U ml⁻¹ and (1.3 ± 0.2) × 10⁶ U ml⁻¹ respectively. The maximum expression levels of FeIFN-α7 and FeIFN-α7xArg were (3.7 ± 0.2) × 10⁶ U ml⁻¹ and (3.5 ± 0.4) × 10⁶ U ml⁻¹ at 2 dpi in Rachiplusia nu larvae and (1.1 ± 0.2) × 10⁶ U ml⁻¹ and (1.0 ± 0.15) × 10⁶ U ml⁻¹ at 5 dpi in Spodoptera frugiperda larvae respectively. R. nu was a better host for FeIFN-α7 and FeIFN-α7xArg expression. The 8xArg tag did not affect the biological activity of FeIFN-α7 and was useful to promote the FeIFN-α7xArg adsorption on ion exchange chromatography (IEC), allowing its purification in a single step from supernatant culture and R. nu larvae. FeIFN-α7xArg was purified from the larval extract with a yield of 70% and a purification factor of 25 free of viruses. We conclude that R. nu larvae are new low-cost hosts for the expression of recombinant FeIFN-α7.     

Improved high thermal stability of pullulanase from a newly isolated thermophilic Bacillus sp. AN-7

A thermophilic Bacillus sp. strain AN-7, isolated from a soil in India, produced an extracellular pullulanase upon growth on starch–peptone medium. The enzyme was purified to homogeneity by ammonium sulfate precipitation, anion exchange and gel filtration chromatography. The optimum temperature and pH for activity was 90 °C and 6.0. With half-life time longer than one day at 80 °C the enzyme proves to be thermostable in the pH range 4.5–7.0. The pullulanase from Bacillus strain lost activity rapidly when incubated at temperature higher than 105 °C or at pH lower than 4.5. Pullulanase was completely inhibited by the Hg²⁺ ions. Ca²⁺, dithiothreitol, and Mn²⁺ stimulated the pullulanase activity. Kinetic experiments at 80 °C and pH 6.0 gave V_max and K_m values of 154 U mg⁻¹ and 1.3 mg ml⁻¹. The products of pullulan were maltotriose and maltose. This proved that the purified pullulanase (pullulan-6-glucanohydrolase, EC 3.2.1.41) from Bacillus sp. AN-7 is classified under pullulanase type I. To our knowledge, this Bacillus pullulanase is the most highly thermostable type I pullulanase known to date.     

Optimization of Cd2+ removal by the cyanobacterium Synechocystis pevalekii using the response surface methodology

Response surface methodology (RSM) has been used to optimize the critical parameters responsible for higher Cd²⁺ removal by a unicellular cyanobacterium Synechocystis pevalekii. A three-level Box–Behnken factorial design was used to optimize pH, biomass and metal concentration for Cd²⁺ removal. A coefficient of determination (R²) value (0.99), model F-value (86.40) and its low p-value (F < 0.0001) along with lower value of coefficient of variation (5.61%) indicated the fitness of response surface quadratic model during the present study. At optimum pH (6.48), biomass concentration (0.25 mg protein ml^?1) and metal concentration (5 μg ml^?1) the model predicted 4.29 μg ml^?1 Cd²⁺ removal and experimentally, 4.27 μg ml^?1 Cd²⁺ removal was obtained.     

Characterization and overproduction of a thermo-alkaline pectate lyase from alkaliphilic Bacillus licheniformis with potential in ramie degumming

A thermo-alkaline pectate lyase (BliPelA) gene from an alkaliphilic Bacillus licheniformis strain was cloned and overexpressed in Escherichia coli. Mature BliPelA exhibited maximum activity at pH 11 and 70 °C, and demonstrated cleavage capability on a broad range of substrates such as polygalacturonic acid, pectins, and methylated pectins. The highest specific activity, of 320 U mg⁻¹, was towards polygalacturonic acid. Significant ramie (Boehmeria nivea) fiber weight loss (21.5%) was obtained following enzyme treatment and combined enzyme-chemical treatment (29.3%), indicating a high ramie degumming efficiency of BliPelA. The total activity of recombinant BliPelA reached 1450.1 U ml⁻¹ with a productivity of 48.3 U ml⁻¹ h⁻¹ under high-cell-density cultivation with a glycerol exponential feeding strategy for 30 h in 1-l fed-batch fermenter, and 1380.1 U ml⁻¹ with a productivity of 57.5 U ml⁻¹ h⁻¹ after 24 h under constant glucose feeding in a 20-l fermenter using E. coli as the host. The enzyme yields reached 4.5 and 4.3 g l⁻¹ in 1-l and 20-l fed-batch fermenters, respectively, which are higher than those of most reported alkaline Pels. Based on these promising properties and high-level production, BliPelA shows great potential for application in ramie degumming in textile industry.     

AhpC (alkyl hydroperoxide reductase) from Anabaena sp. PCC 7120 protects Escherichia coli from multiple abiotic stresses

Alkyl hydroperoxide reductase (AhpC) is known to detoxify peroxides and reactive sulfur species (RSS). However, the relationship between its expression and combating of abiotic stresses is still not clear. To investigate this relationship, the genes encoding the alkyl hydroperoxide reductase (ahpC) from Anabaena sp. PCC 7120 were introduced into E. coli using pGEX-5X-2 vector and their possible functions against heat, salt, carbofuron, cadmium, copper and UV-B were analyzed. The transformed E. coli cells registered significantly increase in growth than the control cells under temperature (47 °C), NaCl (6% w/v), carbofuron (0.025 mg ml^?1), CdCl₂ (4 mM), CuCl₂ (1 mM), and UV-B (10 min) exposure. Enhanced expression of ahpC gene as measured by semi-quantitative RT-PCR under aforementioned stresses at different time points demonstrated its role in offering tolerance against multiple abiotic stresses.     

Glucose isomerase production on a xylan-based medium by Bacillus thermoantarcticus

Effects of medium components on intracellular glucose isomerase (GI) production were investigated by Bacillus thermoantarcticus. The highest GI activity was obtained as 1630 U dm^?3 in the medium containing (g dm^?3): 10.6, birchwood-xylan; 5.6, yeast extract; 5.9 (NH₄)₂SO₄ at T = 55 °C in 33 cm^?3 shake-flasks. When birchwood-xylan was replaced with oat spelt- or beechwood-xylan, GI activity decreased to 1372 and 1308 U dm^?3, respectively. Effects of pH at uncontrolled-pH (pH_UC = 6.0) and controlled-pH (pH_C = 6.0) operations, and oxygen transfer at the air inlet rate of 0.5 vvm and agitation rates of 300, 500 and 700 min^?1, were investigated in 3.0 dm³ bioreactor system with 1.65 dm³ working volume in the designed medium. The highest GI activity was attained at 500 min^?1, 0.5 vvm, pH_UC = 6 as 1840 U dm^?3 where cell concentration was 2.3 g dm^?3. The use of agricultural waste xylan, as the carbon source resulted in concomitant production of xylanase and GI. The highest xylanase activity was attained as 9300 U dm^?3 at 500 min^?1 and 0.5 vvm. K_La varied between 0.008–0.033 s^?1 whereas the highest oxygen uptake rate was 0.002 mmol dm^?3 s^?1. Initially biochemical reaction limitations were effective; thereafter, mass transfer resistances became more effective.     

Purification and characterization of an azoreductase from Escherichia coli CD-2 possessing quinone reductase activity

An oxygen-insensitive intracellular enzyme that is responsible for the decolorization of azo dyes was purified from Escherichia coli CD-2. The molecular weight of the purified enzyme was estimated as 27,000 ± 500 Da. Protein identification indicated that the enzyme had high sequence homology with E. coli K12 quinone reductase, and the enzyme was proved to have both azoreductase and quinone reductase activity. With methyl red as substrate, the optimal pH value and temperature were 6.5 and 37 °C, respectively. The enzyme was stable under different physiochemical conditions. The azoreductase activity was restrained by SDS and was almost completely inhibited by Co²⁺ and Hg²⁺. K_m and V_max values were 0.18 mM and 8.12 U mg^?1 of protein for NADH and 0.05 mM and 6.46 U mg^?1 of protein for methyl red, respectively. The purified enzyme could efficiently decolorize methyl red with both NADH and NADPH as electron donors.     

Efficient cloning and expression of a thermostable nitrile hydratase in Escherichia coli using an auto-induction fed-batch strategy

A nitrile hydratase (NHase) gene from Aurantimonas manganoxydans was cloned and expressed in Escherichia coli BL21 (DE3). A downstream gene adjacent to the β-subunit was necessary for the functional expression of the recombinant NHase. The structural gene order of the Co-type NHase was α-subunit beyond β-subunit, different from the order typically reported for Co-type NHase genes. The NHase exhibited adequate thermal stability, with a half-life of 1.5 h at 50 °C. The NHase efficiently hydrated 3-cyanopyridine to produce nicotinamide. In a 1-L reaction mixture, 3.6 mol of 3-cyanopyridine was completely converted to nicotinamide in four feedings, exhibiting a productivity of 187 g nicotinamide/g dry cell weight/h. An industrial auto-induction medium was applied to produce the recombinant NHase in 10-L fermenter. A glycerol-limited feeding method was performed, and a final activity of 2170 U/mL culture was achieved. These results suggested that the recombinant NHase was efficiently cloned and produced in E. coli.     

Purification and characterization of a thermostable endo-β-1,4-glucanase from a novel strain of Penicillium purpurogenum

A novel endo-β-1,4-glucanase (EG)-producing strain was isolated and identified as Penicillium purpurogenum KJS506 based on its morphology and internal transcribed spacer (ITS) rDNA gene sequence. P. purpurogenum produced one of the highest levels of EG (5.6 U mg-protein^?1) with rice straw and corn steep powder as carbon and nitrogen sources, respectively. The extracellular EG was purified to homogeneity by sequential chromatography of P. purpurogenum culture supernatants on a DEAE sepharose column, a gel filtration column, and then on a Mono Q column with fast protein liquid chromatography. The purified EG was a monomeric protein with a molecular weight of 37 kDa and showed broad substrate specificity with maximum activity towards lichenan. P. purpurogenum EG showed t_1/2 value of 2 h at 70 °C and catalytic efficiency of 118 ml mg^?1 s^?1, one of the highest levels seen for EG-producing microorganisms. Although EGs have been reported elsewhere, the high catalytic efficiency and thermostability distinguish P. purpurogenum EG.     

Biocontrol of major postharvest pathogens on apple using Rhodotorula glutinis and its effects on postharvest quality parameters

The biocontrol activity of Rhodotorula glutinis on gray mold decay and blue mold decay of apple caused by Botrytis cinerea and Penicillium expansum, respectively, was investigated, as well as its effects on postharvest quality of apple fruits. The results show there was a significant negative correlation between concentrations of the yeast cells and the disease incidence of the pathogens. The higher concentration of the R. glutinis, the better effect of the biocontrol capacity. At concentrations of R. glutinis 1 × 10⁸ CFU ml^?1, the amount of gray mold decay was completely inhibited after 5 days incubation at 20 °C, after challenge with B. cinerea spores suspension of 1 × 10⁵ spores ml^?1; While the blue mold decay was completely inhibited at concentrations of 5 × 10⁸ CFU ml^?1, at challenged with P. expansum spores suspension of 5 × 10⁴ spores ml^?1_. These results demonstrated that the efficacy of R. glutinis in controlling of gray mold decay of apples was better than the efficacy of controlling blue mold. R. glutinis within inoculated wounds on apples increased in numbers at 20 °C from an initial level of 9.5 × 10⁵ CFU per wound to 2.24 × 10⁷ CFU at 20 °C after 1 day. The highest population of the yeast was recovered 4 days after inoculation, the yeast population in wounds increased by 56.9 times. After that, the population of the yeast began to decline very slowly. R. glutinis significantly reduced the incidence of natural infections on intact fruit from 75% in the control fruit to 28.3% after 5 days at 20 °C, and from 58.3 to 6.7% after 30 days at 4 °C followed by 4 days at 20 °C. R. glutinis treatment had no deleterious effect on quality parameters after 5 days at 20 °C or after 30 days at 4 °C followed by 4 days at 20 °C.     

A thermoalkaliphilic halotolerant esterase from Rhodococcus sp. LKE-028 (MTCC 5562): Enzyme purification and characterization

A newly isolated Rhodococcus sp. LKE-028 (MTCC 5562) from soil samples of Gangotri region of Uttarakhand Himalayan produced a thermostable esterase. The enzyme was purified to homogeneity with purification fold 62.8 and specific activity 861.2 U mg^?1 proteins along with 26.7% recovery. Molecular mass of the purified enzyme was 38 kDa and values of K_m and V_max were 525 nM and 1666.7 U mg^?1 proteins, respectively. The esterase was active over a broad range of temperature (40–100 °C) and pH (7.0–12.0). The esterase was most active at pH 11.0. The optimum temperature of enzyme activity was 70 °C and the enzyme was completely stable after 3 h pre-incubation at 60 °C. Metal ions like Ca²⁺, Mg²⁺ and Co²⁺ stimulated enzyme activities. Purified esterase remarkably retained its activity with 10 M NaCl. Enzyme activity was slightly increased in presence of non-polar detergents (Tween 20, Tween 80 and Triton X 100), and compatible with oxidizing agents (H₂O₂) and reducing agents (β-mercaptoethanol). Activities of the enzyme was stimulated in presence of organic solvents like DMSO, benzene, toluene, methanol, ethyl alcohol, acetone, isoamyl alcohol after 10 days long incubation. The enzyme retained over 75% activity in presence of proteinase K. Besides hyperthermostability and halotolerancy the novelty of this enzyme is its resistance against protease.     

Molecular cloning and high-level expression of a β-galactosidase gene from Paecilomyces aerugineus in Pichia pastoris

A β-galactosidase gene (designated PaGalA) was cloned for the first time from Paecilomyces aerugineus and expressed in Pichia pastoris under the control of the AOX1 promoter. The coding region of 3036 bp encoded a protein of 1011 amino acids with a deduced molecular mass of 108.7 kDa. The PaGalA without the signal peptide was cloned into a vector pPIC9K and was expressed successfully in P. pastoris as active extracellular β-galactosidase. The recombinant β-galactosidase (PaGalA) was secreted into the medium at an extremely high levels of 22 mg ml⁻¹ having an activity of 9500 U ml⁻¹ from high density fermentation culture, which is by far the highest yield obtained for a β-galactosidase. The purified enzyme with a high specific activity of 820 U mg⁻¹ had a molecular mass of 120 kDa on SDS-PAGE. PaGalA was optimally active at pH 4.5 and a temperature of 60 °C. The recombinant β-galactosidase was able to hydrolyze lactose efficiently at pH 5.0 and 50 °C. It also possessed transglycosylation activities at high concentrations of lactose. PaGalA exhibited better lactose hydrolysis efficiency in whey than two other widely used commercial lactases. The extremely high expression levels coupled with favorable biochemical properties make this enzyme highly suitable for commercial purposes in the hydrolysis of lactose in milk or whey.     

Purification,characterization and secondary structure elucidation of a detergent stable,halotolerant, thermoalkaline protease from Bacillus cereus SIU1

A thermoalkaline protease with a molecular weight of 22 kDa was purified from the Bacillus cereus SIU1 strain using a combination of Q-Sepharose and Sephadex G-75 chromatography. The kinetic analyses revealed the K_m, V_max and k_cat to be 1.09 mg ml^?1, 0.909 mg ml^?1 min^?1 and 3.11 s^?1, respectively, towards a casein substrate. The protease was most active and stable at pH 9.0 and between a temperature range of 45–55 °C. It was fully stable at 0.0–2.0% and moderately stable at 2.5–10.0% (w/v) sodium chloride. Phenyl methyl sulfonyl fluoride, ethylene diamine tetra acetic acid and ascorbic acid were inhibitory with regard to enzyme activity, whereas cysteine, β-mercaptoethanol, calcium, magnesium, manganese and copper at concentration of 1.0 mM increased enzyme activity. Sodium dodecyl sulfate, Triton X-100, Tween 80, hydrogen peroxide and sodium perborate significantly enhanced protease activity at 0.1 and 1.0% concentrations. In the presence of 0.1 and 1.0% (w/v) detergents, the protease was fairly stable and retained 50–76% activity. Therefore, it may have a possible application in laundry formulations. An initial analysis of the circular dichroism (CD) spectrum in the ultraviolet range revealed that the protease is predominantly a β-pleated structure and a detailed structural composition showed ～50% β-sheets. The CD-based conformational evaluation of the protease after incubation with modulators, metal ions, detergents and at different pH values, revealed that the change in the β-content directly corresponded to the altered enzyme activity. The protease combined with detergent was able to destain blood stained cloth within 30 min.     

Production of the postharvest biocontrol agent Bacillus subtilis CPA-8 using low cost commercial products and by-products

The aim of this research was to identify a low cost medium based on commercial products and by-products that provided maximum Bacillus subtilis CPA-8 growth and maintained biocontrol efficacy. Low cost media combining economical nitrogen and carbon sources such as yeast extract, peptone, soy products, sucrose, maltose and molasses were tested. Tests were carried out in 250-ml flasks containing 50 ml of each tested medium. Maximum cell growth (>3 × 10⁹ CFU ml^?1) was obtained in defatted soy flour 44% combined with sucrose or molasses media. Second, CPA-8 production was scaled up in a 5-l fermenter and CPA-8 population dynamics, pH and oxygen consumption in the optimized medium (defatted soy flour 44% – molasses) was recorded. In these tests, there was a 5-h lag phase before growth, after which exponential growth occurred and maximum production was 3 × 10⁹ CFU ml^?1 after 20 h. Fruit trials with cells and cell free supernatants from CPA-8 grown in optimized medium maintained biocontrol efficacy against Monilinia fructicola on peaches, resulting in disease reductions up to 95%. CPA-8 populations survived in wounds on inoculated peaches, regardless of the culture media used. The results show that B. subtilis CPA-8 can be produced in a low cost medium combining inexpensive nitrogen and carbon sources (40 g l^?1 defatted soy flour 44%, 5 g l^?1 molasses plus mineral trace supplements) in shake flasks and a laboratory fermenter (5 l). The results could be used to provide a reliable basis for scaling up the fermentation process to an industrial level.     

Purification of a laccase from fungus combs in the nest of Odontotermes formosanus

A new enzyme was isolated from the fungus combs in the nest of Odontotermes formosanus and identified as a laccase. The single laccase was purified with a purification factor of 16.83 by ammonium sulphate precipitation and anion exchange chromatography, to a specific activity of 211.11 U mg⁻¹. Its molecular mass was 65 kDa. The optimum pH value and temperature were 4.0 °C and 10 °C with ABTS as the substrate, respectively. The enzyme activity stabilized at temperatures between 10 °C and 30 °C and decreased rapidly when the temperature was above 30 °C. The V_max and K_m values were 3.62 μmol min⁻¹ mg⁻¹ and 119.52 μM, respectively. Ethanol concentration affected laccase activity, inhibiting 60% of enzyme activity at a concentration of 70%. Metal ions of Mg²⁺, Ba²⁺ and Fe²⁺ showed inhibition on enzyme activity of 17.2%, 5.3% and 9.4%, respectively, with the increase of metal ions concentration from 1 mM to 5 mM. Especially Fe²⁺ strongly inhibited enzyme activity up to 89% inhibition at a concentration of 1 mM.     

Direct in vivo interaction of the antibiotic primycin with the plasma membrane of Candida albicans: An EPR study

The direct interaction of the antibiotic primycin with the plasma membrane was investigated by employing the well-characterized ergosterol-producing, amphotericin B-sensitive parental Candida albicans strain 33erg⁺ and its ergosterol-less amphotericin B-resistant plasma membrane mutant erg-2. The growth inhibition concentration in shaken liquid medium was 64 μg ml^?1 for 33erg⁺ and 128 μg ml^?1 for erg-2, suggesting that the plasma membrane composition influences the mode of action of primycin. To determine the primycin-induced changes in the plasma membrane dynamic, electron paramagnetic resonance (EPR) spectroscopy methods were used, the spin-labeled fatty acid 5-(4,4-dimethyloxazolidine-N-oxyl)stearic acid) being applied for the in vivo measurements. The phase transition temperatures of untreated strain 33erg⁺ and its mutant erg-2 were 12.5 °C and 11 °C, respectively. After 128 μg ml^?1 primycin treatment, these values increased to 17.5 °C and 16 °C, revealing a significant reduction in the phospholipid flexibility. Saturation transfer EPR measurements demonstrated that, the rotational correlation times of the spin label molecule for the control samples of 33erg⁺ and erg-2 were 60 ns and 100 ns. These correlation times gradually decreased on the addition of increasing primycin concentrations, reaching 8 μs and 1 μs. The results indicate the plasma membrane “rigidizing” effect of primycin, a feature that may stem from its ability to undergo complex formation with membrane constituent fatty acid molecules, causing alterations in the structures of phospholipids in the hydrophobic surface near the fatty acid chain region.     

Cloning,expression and characterization of a novel acidic xylanase,XYL11B,from the acidophilic fungus Bispora sp. MEY-1

A xylanase gene (xyl11B) was cloned from Bispora sp. MEY-1 and expressed in Pichia pastoris. xyl11B, with a 66-bp intron, encodes a mature protein of 219 residues with highest identity (57.1%) to the Trichoderma reesei xylanase of glycoside hydrolase family 11. The purified recombinant XYL11B was acidophilic, exhibiting maximum activity at pH 2.6 and 65 °C. The enzyme was also thermostable, pH stable, and was highly resistant to both pepsin and trypsin, suggesting good performance in the digestive tract as a feed supplement to improve animal nutrition. The activity of XYL11B was enhanced by most metal ions but was inhibited weakly by Hg²⁺, Pb²⁺and Cu²⁺, which strongly inhibit many other xylanases. The specific activity of XYL11B for oat spelt xylan substrate was 2049 U mg^?1. The main hydrolysis products of xylan were xylose and xylobiose.