Luminescence Enhancement of Carboxyl-Coated CdTe Quantum Dots by Silver Nanoparticles

Metallic nanoparticles (NPs) have been used to improve the sensibility of biosensors and bioassays either by enhancing radiative emission or inducing quenching process on fluorescent probes. The aim of this research was to study the interaction of silver and silver-pectin NPs with water-dispersed carboxyl-coated cadmium telluride (CdTe) quantum dots (QDs). Metallic NPs were observed to change the emission of these fluorophores through local field effects. In a solution-base platform, an increase of 82 % was observed for the CdTe emission due to the interaction of QDs and silver-pectin NPs. QDs interaction with silver NPs without pectin was also investigated and a smaller emission enhancement of 20 % was detected. We observed that the NPs’ nature and QDs’ surface charge and concentration are important parameters for NPs-QDs interaction. Moreover, the presence of the pectin polymer shows to be a key component to the observed fluorescence enhancement.     

Investigating Fluorescence Quenching of ZnS Quantum Dots by Silver Nanoparticles

Water dispersible zinc sulfide quantum dots (ZnS QDs) with an average diameter of 2.9 nm were synthesized in an environment friendly method using chitosan as stabilizing agent. These nanocrystals displayed characteristic absorption and emission spectra having an absorbance edge at 300 nm and emission maxima (λ _emission) at 427 nm. Citrate-capped silver nanoparticles (Ag NPs) of ca. 37-nm diameter were prepared by modified Turkevich process. The fluorescence of ZnS QDs was significantly quenched in presence of Ag NPs in a concentration-dependent manner with K _sv value of 9 × 10⁹ M⁻¹. The quenching mechanism was analyzed using Stern–Volmer plot which indicated mixed nature of quenching. Static mechanism was evident from the formation of electrostatic complex between positively charged ZnS QDs and negatively charged Ag NPs as confirmed by absorbance study. Due to excellent overlap between ZnS QDs emission and surface plasmon resonance band of Ag NPs, the role of energy transfer process as an additional quenching mechanism was investigated by time-resolved fluorescence measurements. Time-correlated single-photon counting study demonstrated decrease in average lifetime of ZnS QDs fluorescence in presence of Ag NPs. The corresponding F?rster distance for the present QD–NP pair was calculated to be 18.4 nm.     

Luminescence Enhancement and SERS by Self-Assembled Plasmonic Silver Nanostructures in Nanoporous Glasses

It was shown experimentally that the action of continuous electric field on nanoporous silicate glasses with interconnecting pores, containing silver nanoparticles, leads to the spatial redistribution of nanoparticles. The concentration of nanoparticles near the negative electrode increases and results in silver nano- and microdendrite structure growth. The main mechanisms of the described effects are the field emission of silver ions from silver nanoparticles near negative electrode, migration of silver ions in the external electric field to the negative electrode, reduction of silver ions by free electrons, and new silver nanoparticle formation. The experiments have shown that at the ends of microdendrites, local field enhancement appears, which results in luminescence enhancement and in SERS.

     

Broadband Enhancement of PbS Quantum Dot Solar Cells by the Synergistic Effect of Plasmonic Gold Nanobipyramids and Nanospheres

For the first time, the plasmonic gold bipyramids (Au BPs) are introduced to the PbS colloidal quantum dot (CQD) solar cells for improved infrared light harvesting. The localized surface plasmon resonance peaks of Au BPs matches perfectly with the absorption peaks of conventional PbS CQDs. Owing to the geometrical novelty of Au BPs, they exhibit significantly stronger far‐field scattering effect and near‐field enhancement than conventional plasmonic Au nanospheres (NSs). Consequently, device open‐circuit voltage (V_oc) and short‐circuit current (J_sc) are simultaneously enhanced, while plasmonic photovoltaic devices based on Au NSs only achieve improved J_sc. The different effects and working mechanisms of these two Au nanoparticles are systematically investigated. Moreover, to realize effective broadband light harvesting, Au BPs and Au NSs are used together to simultaneously enhance the device optical and electrical properties. As a result, a significantly increased power conversion efficiency (PCE) of 9.58% is obtained compared to the PCE of 8.09% for the control devices due to the synergistic effect of the two plasmonic Au nanoparticles. Thus, this work reveals the intriguing plasmonic effect of Au BPs in CQD solar cells and may provide insight into the future plasmonic enhancement for solution‐processed new‐generation solar cells.     

Plasmonic Control of Spontaneous Emission of Quantum Dots in Sub-Wavelength Photonic Templates

Finite difference time domain (FDTD) simulations were performed on two different plasmonic sub-wavelength photonic templates embedded with CdSe quantum dots. Tunable loading of these templates with plasmonic nano antenna allowed control of the emission from the embedded quantum dots. We discuss how large loading of nano antenna can effectively control the optical density of states for the quantum dots leading to enhancement of their radiative decay rates as observed in experiments. On the other hand, at low level of loading, while FDTD fails to capture the observed enhancement of decay rates in experiment, an alternative mechanism is suggested to exist in such cases. Thus, subtle interplay of multiple mechanisms engineered by appropriate placement and loading of plasmonic nano antenna in such templates is demonstrated as an effective method to control optical density of states and hence spontaneous emission of embedded quantum dots.     

Comparative Study of Plasmonic Properties of Cysteine-Functionalized Gold and Silver Nanoparticle Aggregates

The absorptance spectra of gold and silver nanoparticle (NP) aqueous dispersions were measured by UV–visible spectroscopy and computed numerically by finite element method. Both NPs were functionalized by l-cysteine amino acid (Cys) in order to develop aggregate-based localized surface plasmon resonance biosensors. Absorptance spectra measured at an analogous pH value of ～4.9 were compared, where Au-Cys conjugates have moderately split spectra with two commensurate maxima, while Ag-Cys conjugates exhibit the most pronounced secondary peak according to the highest degree of aggregation. The purpose of our theoretical study was to determine the simplest linear chain-like and wavy aggregate geometries, which result in maxima matching the measured peaks. The aggregates were characterized by N number and d diameter of NPs, g gap between the NPs, and t thickness of the l-cysteine covering. By tuning the angle of incidence and E -field oscillation direction in p-polarized light with respect to the aggregates, the contribution of longitudinal and transversal modes was varied. The comparison of measurements and computations revealed that spectra measured on bioconjugate dispersions include effects of numerous aggregates with various geometries, illuminated from different directions and are influenced by inter-aggregate coupling. Inspecting the normalized E -field distribution surrounding the aggregates, it was shown that fundamentally different multipolar modes can be identified at primary and secondary absorptance maxima, due to coupled plasmonic resonances on NPs.     

Optical Properties of Silver Hollow Triangular Nanoprisms

The extinction spectra and electric field distributions of hollow triangular nanoprisms are calculated using the discrete dipole approximation method and compared with those of the solid triangular nanoprisms. When light propagates along the prisms, the main plasmon peaks of hollow triangular nanoprisms red shift compared with those of the solid triangular nanoprisms. At the main plasmon peaks, the hollow triangular nanoprisms provide more hot spots than the solid triangular nanoprisms. Therefore, the hollow triangular nanoprisms are more surface-enhanced Raman scattering active than the solid triangular prisms and can be used to detect small amount of molecules. For the hollow triangular nanoprism, although the local electric field distribution extremely relates to the incident polarization, the extinction spectra are independent of the incident polarization. In addition, the main plasmon peaks red shift linearly with the edge length, while they blue shift exponentially with the increase of the thickness of the hollow triangular nanoprisms. These results could be used to engineer hollow triangular nanoprisms for specific plasmonic applications.     

Entanglement of Two Quantum Dots with Azimuthal Angle Difference in Plasmonic Waveguide System

We investigate the properties of entanglement between two quantum dots (QDs) with an azimuthal angle difference in two different plasmonic waveguide systems where a cavity coupled to the QDs is included or not. The real space formalism and the concurrence are used in solving the eigenvalue equation and calculating the entanglement, respectively. We analyze the influence of azimuthal angle difference on the entanglement and propose several effective ways to achieve high entanglement by adjusting the detuning, the QD-cavity coupling strength, and so on. Moreover, comparing the entanglement in the two models, we demonstrate that the addition of cavity can improve the entanglement of two QDs.

     

Pairwise and Bipartite Entanglements of Three Non-Equally Separated Quantum Dots in Plasmonic Nanowaveguide System

Plasmonics - We theoretically investigate properties of the pairwise and bipartite entanglements of three non-equally separated quantum dots (QDs) coupled to one-dimensional plasmonic nanowaveguide...     

Plasmonic Control of Refractive Index Without Absorption in Metallic Photonic Crystals Doped with Quantum Dots

Plasmonics - We investigate the refractive index without absorption in metallic photonic crystals doped with quantum dots. It is found that the absorption and dispersion of probe field can be...     

Well Controlling of Plasmonic Features of Gold Nanoparticles on Macro Porous Silicon Substrate by HF Acid Concentration

Plasmonics - In this work, we fabricated an efficient macroporous silicon/gold nanoparticles (macro psi/AuNPs) hybrid structure and how well controlling of plasmonic features on macro psi/AuNPs...     

Obtain Quadruple Intense Plasmonic Resonances from Multilayered Gold Nanoshells by Silver Coating: Application in Multiplex Sensing

Four intense and separate localized surface plasmon resonance (LSPR) absorption peaks have been obtained in the gold-dielectric–gold–silver multilayer nanoshells. The silver coating on the gold shell results in a new LSPR peak at about 400 nm corresponding to the $ {{\left| {\omega_{+}^{-}} \right\rangle}_{Ag }} $ mode. The intense local electric field concentrated in the silver shell at the wavelength of 400 nm indicates that this new plasmonic band is coming from the symmetric coupling between the antibonding silver shell plasmon mode and the inner sphere plasmon. Increasing the silver shell thickness also leads to the intensity increasing of the $ {{\left| {\omega_{+}^{-}} \right\rangle}_{Au }} $ mode and blue shift of $ \left| {\omega_{-}^{+}} \right\rangle $ and $ \left| {\omega_{-}^{-}} \right\rangle $ modes. Therefore, quadruple intense plasmonic resonances in the visible region could be achieved in gold-dielectric–gold–silver multilayer nanoshells by tuning the geometrical parameters. And the quadruple intense plasmonic resonances in the visible region provide well potential for multiplex biosensing based on LSPR.     

Plasmonic Properties of Gold Nanostructures on Gold Film

This paper reports on a systematic study of the plasmonic properties of periodic arrays of gold cylindrical nanoparticles in contact with a gold thin film. Depending on the gold film thickness, it observes several plasmon bands. Using a simple analytical model, it is able to assign all these modes and determine that they are due to the coupling of the grating diffraction orders with the propagating surface plasmons travelling along the film. With finite difference time domain (FDTD) simulations, it demonstrates that large field enhancement occurs at the surface of the nanocylinders due to the resonant excitation of these modes. By tilting the sample, it also observes the evolution of the spectral position of these modes and their tuning through nearly the whole visible range is possible. Such plasmonic substrates combining both advantages of the propagative and localised surface plasmons could have large applications in enhanced spectroscopies.

     

Tuning Plasmonic Properties of Truncated Gold Nanospheres by Coating

The influence of TiO₂ coating on resonant properties of gold nanoisland films deposited on silica substrates was studied numerically and in experiments. The model describing plasmonic properties of a metal truncated nanosphere placed on a substrate and covered by a thin dielectric layer has been developed. The model allows calculating a particle polarizability spectrum and, respectively, its surface plasmon resonance (SPR) wavelength for any given cover thickness, particle radius and truncation parameter, and dielectric functions of the particle, the substrate, the coating layer, and the surrounding medium. Dependence of the SPR position calculated for truncated gold nanospheres has coincided with the measured one for the gold nanoisland films covered with titania of different thicknesses. In the experiments, gold films with thickness of 5 nm were deposited on a silica glass substrate, annealed at 500 °C to form nanoislands of 20 nm in diameter, and covered with amorphous titania layers using atomic layer deposition technique. The resulting structures were characterized with scanning electron microscopy and optical absorption spectroscopy. The measured dependence of the SPR position on titania film thickness corresponded to the one calculated for truncated sphere-shaped nanoparticles with the truncation angle of ~50°. We demonstrated the possibility of tuning the SPR position within ~100 nm range by depositing to 30 nm thick titania layer.

     

Investigation of the Plasmonic Interaction of Gold Nanoparticles Toward Plasmonic Photothermal Therapeutics

Plasmonic interaction of nanoparticles located in close proximity, embedded in breast tissue, is simulated for estimating the optical characteristics like optical absorption cross-section, plasmonic wavelength as well as full-width half maxima (FWHM). The computations are done for the monomers, homodimers, and heterodimers of spherical and rod-shaped gold nanoparticles considering various interparticle spacings for gold nanospheres and the interparticle spacing as well as the orientation for gold nanorods (GNRs). The results indicate that for the spherical dimer, with the change in interparticle spacing from 1 to 20 nm, the peak absorption cross-section decreases by 43%. Whereas for the GNRs, the absorption cross-section increases/decreases, within 9–18%, depending on the homodimer or heterodimer configuration. Furthermore, secondary peaks for the absorption cross-section are obtained within wavelengths of 630–940 nm due to antibonding modes for GNR heterodimers. For GNR heterodimer located end-to-end, this secondary peak for the absorption cross-section appears at 780 nm irrespective of interparticle spacing within 1–5 nm. The absorption coefficient is considerably dependent on the configuration and proximity of GNRs located within the tissue. While FWHM is not significantly influenced by GNRs configuration and interparticle spacing. For interparticle spacing from 1 to 20 nm, the plasmonic wavelength shifts by 38 nm for the spherical dimer and by 35–86 nm for various GNR dimers. The findings of this study are useful for plasmonic photothermal therapeutics as the heat generation is governed by the resulting absorption cross-section due to plasmonic coupling of the closely spaced and different orientations of the nanoparticles.

     

Research Advances on Apoptosis Caused by Quantum Dots

Recently, quantum dots (QDs) have been widely applied in biological and biomedical fields such as cell labeling, living tissue imaging, and photodynamic therapy because of their superior optical properties. Meanwhile, the potential biological negative effects and/or toxic effects of QDs have become increasingly important, especially the cytotoxicity caused by QDs. One of the common cytotoxicity when living organisms are treated with QD is apoptosis, where many attempts have been made to explain the mechanisms of apoptosis caused by QDs’ use. One of the mechanisms is the production of cadmium ion (Cd²⁺) and reactive oxygen species (ROS). Excess generation of ROS will result in oxidative stress that would mediate apoptosis. Furthermore, the activation of cell death receptors and mitochondria-dependent such as B cell lymphoma 2 (Bcl-2) family and the caspase family could onset apoptosis. Signal transduction such as some classical signal pathways of PI3K-AKT, NF-E2-related factor 2 (Nrf2)-antioxidant response element (ARE), mitogen-activated protein kinases (MAPKs), and nuclear factor kappa B (NF-κB) also plays an important role in the regulation of apoptosis. Several ways to reduce the apoptotic rate have been introduced, such as surface modification, controlling, the dose, size, and exposure time of QDs as well as using antioxidants or inhibitors. In this review, we attempted to review the most recent findings associated with apoptosis caused by QDs so as to provide some guidelines for a safer QD application in the future.     

Plasmonic Interaction Between Silver Nano-Cubes and a Silver Ground Plane Studied by Surface-Enhanced Raman Scattering

The plasmonic interaction between silver nano-cubes and a silver ground plane with and without a dielectric spacer is studied for surface-enhanced Raman scattering (SERS) for rhodamine 6G (R6G) molecules absorbed onto the silver nano-cubes. Experimental results show that the composite substrates made from silver nano-cubes and the silver ground plane produce a stronger SERS signal than by the cubes alone, due to the plasmonic interaction between the cubes and the film. Numerical simulation is used to verify the plasmonic enhancement of the composite substrate and is consistent with the experimental results. The lowest concentration of R6G molecules which can be detected with the composite substrate is about 10⁻¹¹ M with our setup.     

Targeting of Embryonic Stem Cells by Peptide-Conjugated Quantum Dots

Background

Targeting stem cells holds great potential for studying the embryonic stem cell and development of stem cell-based regenerative medicine. Previous studies demonstrated that nanoparticles can serve as a robust platform for gene delivery, non-invasive cell imaging, and manipulation of stem cell differentiation. However specific targeting of embryonic stem cells by peptide-linked nanoparticles has not been reported.

Methodology/Principal Findings

Here, we developed a method for screening peptides that specifically recognize rhesus macaque embryonic stem cells by phage display and used the peptides to facilitate quantum dot targeting of embryonic stem cells. Through a phage display screen, we found phages that displayed an APWHLSSQYSRT peptide showed high affinity and specificity to undifferentiated primate embryonic stem cells in an enzyme-linked immunoabsorbent assay. These results were subsequently confirmed by immunofluoresence microscopy. Additionally, this binding could be completed by the chemically synthesized APWHLSSQYSRT peptide, indicating that the binding capability was specific and conferred by the peptide sequence. Through the ligation of the peptide to CdSe-ZnS core-shell nanocrystals, we were able to, for the first time, target embryonic stem cells through peptide-conjugated quantum dots.

Conclusions/Significance

These data demonstrate that our established method of screening for embryonic stem cell specific binding peptides by phage display is feasible. Moreover, the peptide-conjugated quantum dots may be applicable for embryonic stem cell study and utilization.     

Plasmonic Properties of Silver Nanoparticles on Two Substrates

In this paper, we examine the plasmonic properties of silver nanoparticles, with an emphasis on the sensitivity of the extinction spectra on the supporting substrate: silica (SiO₂) microsphere and indium tin oxide (ITO) coated glass slide, on which silver particles are deposited electroless and electrochemically, respectively. The microstructures and phases of these nanoparticles are characterized by transmission electron microscopy, field emission electron microscopy and X-ray diffraction analysis. The surface plasmon resonance (SPR) properties which are experimentally measured in the ultraviolet-visible-near infrared spectral region are compared to electrodynamics calculations based on the discrete dipole approximation. A wide SPR band ranging from 400 to 800 nm is observed for the silver nanoparticles on a silica microsphere, which is similar to the plasmon resonance characteristics of metal nanoshells. The SPR of a conducting substrate, however, has an effect on the plasmonic properties of silver nanoparticles at longer wavelength.