Design of Localized Surface Plasmon Resonance (LSPR) Biosensor for Immunodiagnostic of E. coli O157:H7 Using Gold Nanoparticles Conjugated to the Chicken Antibody

E. coli O157:H7 is one of the most important pathogens in food-borne diseases and is the main cause of the pseudo pandemic development of hemorrhagic colitis and hemolytic uremic syndrome. Also E. coli O157:H7 is the most common serotype of Shiga-toxin-producing E. coli. Traditional methods for detecting E. coli O157:H7 are expensive, time-consuming, and less sensitive. A method with high sensitivity and high-resolution optical detection is utilizes the LSPR property of spherical gold nanoparticles (GNP). In this work, we constructed a novel nano-bio probe to detect E. coli O157:H7 by synthesizing citrate gold nanoparticle conjugated (non-covalent bond) with specific chicken anti-E. coli O157:H7 antibody (IgY) by changing the pH of the nanoparticles’ environment. UV-visible and DLS methods were used to confirm the bonding between the antibody and nanoparticles and the LSPR sensitivity of the nano-bio probe was evaluated by ELISA method. We could optically detect this bacterium in less than 2 h by measuring the LSPR band λ max shifts of GNPs. The sensitivity of this novel biosensor was determined by about 10 CFU/ml, using the LSPR property of spherical gold nanoparticles. So that, the LSPR λ max red shifted from 530 to 543 nm in presence of 10 CFU bacterium. In conclusion, this nano biosensor can be used to detect this important pathogen among the clinical specimens.

     

Gold Nanoring Arrays for Near Infrared Plasmonic Biosensing

Gold nanoring array surfaces that exhibit strong localized surface plasmon resonances (LSPR) at near infrared (NIR) wavelengths from 1.1 to 1.6 μm were used as highly sensitive real-time refractive index biosensors. Arrays of gold nanorings with tunable diameter, width, and spacing were created by the nanoscale electrodeposition of gold nanorings onto lithographically patterned nanohole array conductive surfaces over large areas (square centimeters). The bulk refractive index sensitivity of the gold nanoring arrays was determined to be up to 3,780 cm⁻¹/refractive index unit by monitoring shifts in the LSPR peak by FT-NIR transmittance spectroscopy measurements. As a first application, the surface polymerization reaction of dopamine to form polydopamine thin films on the nanoring sensor surface from aqueous solution was monitored with the real-time LSPR peak shift measurements. To demonstrate the utility of the gold nanoring arrays for LSPR biosensing, the hybridization adsorption of DNA-functionalized gold nanoparticles onto complementary DNA-functionalized gold nanoring arrays was monitored. The adsorption of DNA-modified gold nanoparticles onto nanoring arrays modified with mixed DNA monolayers that contained only 0.5 % complementary DNA was also detected; this relative surface coverage corresponds to the detection of DNA by hybridization adsorption from a 50 pM solution.

     

Nanostructure shape effects on response of plasmonic aptamer sensors

A localized surface plasmon resonance (LSPR) sensor surface was fabricated by the deposition of gold nanorods on a glass substrate and subsequent immobilization of the DNA aptamer, which specifically bind to thrombin. This LSPR aptamer sensor showed a response of 6‐nm λ_max shift for protein binding with the detection limit of at least 10 pM, indicating one of the highest sensitivities achieved for thrombin detection by optical extinction LSPR. We also tested the LSPR sensor fabricated using gold bipyramid, which showed higher refractive index sensitivity than the gold nanorods, but the overall response of gold bipyramid sensor appears to be 25% less than that of the gold nanorod substrate, despite the approximately twofold higher refractive index sensitivity. XPS analysis showed that this is due to the low surface density of aptamers on the gold bipyramid compared with gold nanorods. The low surface density of the aptamers on the gold bipyramid surface may be due to the effect of shape of the nanostructure on the kinetics of aptamer monolayer formation. The small size of aptamers relative to other bioreceptors is the key to achieving high sensitivity by biosensors on the basis of LSPR, demonstrated here for protein binding. The generality of aptamer sensors for protein detection using gold nanorod and gold nanobipyramid substrates is anticipated to have a large impact in the important development of sensors toward biomarkers, environmental toxins, and warfare agents. Copyright © 2013 John Wiley & Sons, Ltd.     

Optimal Design for U-bent Fiber-optic LSPR Sensor Probes

The refractive index (RI) sensitivity of a localized surface plasmon resonance (LSPR)-based fiber-optic probes is dependent on surface coverage of gold nanoparticles (GNP), fiber core diameter, and probe geometry. For U-bent LSPR fiber-optic probes, which demonstrated an order higher absorption sensitivity over straight probes, bend diameter and probe length may also have a significant influence on the sensitivity. This study on U-bent fiber-optic LSPR probes is aimed at optimizing these parameters to obtain highest possible RI sensitivity. RI sensitivity increases linearly as a function of surface coverage of GNP in the range of 2–22 %. U-bent fiber-optic probes made of 200-, 400-, and 600-μm fiber core diameter show optimum bend diameter value as ～1.4 mm. In addition, RI sensitivity is almost the same irrespective of fiber core diameter demonstrating flexibility in choice of the fiber and ease in optical coupling. The length of the probe preceding and succeeding the bend region has significantly less influence on RI sensitivity allowing miniaturization of these probes. In addition to these experimental studies, we present a theoretical analysis to understand the relative contribution of evanescent wave absorbance of GNP and refractive losses in the fiber due to GNP, towards the RI sensitivity.     

Gas-Aggregated Copper Nanoparticles with Long-term Plasmon Resonance Stability

Metal nanoparticles (NPs) possessing localized surface plasmon resonance (LSPR) are of high interest for applications in optics, electronics, catalysis, and sensing. The practically important issue is the stability of the LSPR, which often limits the use of some metals due to their chemical reactivity leading to degradation of the NP functionality. In this work, copper NPs of two distinct sizes are produced by magnetron sputtering gas aggregation. This method ensures formation of the particles with high purity and monocrystallinity, enhancing the chemical inertness and providing a superior time stability of the plasmonic properties. Additionally, a simple UV-ozone treatment, which leads to the formation of an oxide shell around the copper NPs, is found to be an efficient method to prevent following gradual oxidation and assure the LSPR stability in ambient atmospheric conditions for periods over 100 days even for small (10–12 nm in diameter) NPs. The obtained results allow for significant improvement of the competitiveness of copper NPs with gold or silver nanostructures, which are traditionally used in plasmonics.

     

Probing the Localized Surface Plasmon Field of a Gold Nanoparticle-Based Fibre Optic Biosensor

Gold nanoparticles (GNP) have been used in a variety of localized surface plasmon resonance (LSPR)-based optical sensor systems and in a variety of forms, such as colloidal suspensions, immobilized GNP on flat surfaces or optical fibres. A key parameter affecting the sensitivity of these systems is the effective depth of penetration of the surface plasmons. This study aims to determine the plasmon penetration depth in the case of an immobilized GNP-based LSPR optical biosensor. The optical biosensor used for experimentation is a U-bend fibre optic probe of 200-μm core diameter and 1.5-mm bend diameter on which GNP is immobilized. Formation of multilayered nanostructures on the immobilized GNP was used to investigate the field of the localized surface plasmons. Two multilayered nanostructures were explored in this study, viz. a polyelectrolyte multilayer formed by layer-by-layer (LBL) deposition of oppositely charged polyelectrolytes and an immunoglobulin G (IgG) multilayer formed through sequential immobilization of two mutually specific antibodies. Measurement of LSPR absorbance change with deposition of each analyte layer was used to determine the plasmon penetration depth (d _P) of the LSPR biosensor. Probing the plasmon field with an IgG multilayer gave rise to at least twofold higher d _P compared to d _P obtained from the polyelectrolyte multilayer. The effect of GNP size was also studied, and GNP of three diameters, viz. 18, 36 and 45 nm, were used. The 36-nm-diameter GNP exhibited the highest d _P. The outcomes of this study may provide leads for optimization of LSPR-based sensors for various biosensing applications.     

Self-Referencing Plasmonic Array Sensors

A self-referencing plasmonic platform is proposed and analyzed. By introducing a thin gold layer below a periodic two-dimensional nano-grating, the structure supports multiple modes including localized surface plasmon resonance (LSPR), surface plasmon resonance (SPR), and Fabry-Perot resonances. These modes get coupled to each other creating multiple Fano resonances. A coupled mode between the LSPR and SPR responses is spatially separated from the sensor surface and is not sensitive to refractive index changes in the surrounding materials or surface attachments. This mode can be used for self-referencing the measurements. In contrast, the LSPR dominant mode shifts in wavelength when the refractive index of the surrounding medium is changed. The proposed structure is easy to fabricate using conventional lithography and electron beam deposition methods. A bulk sensitivity of 429 nm/RIU is achieved. The sensor also has the ability to detect nanometer thick surface attachments on the top of the grating.

     

Localized surface plasmon resonance based gold nanobiosensor: Determination of thyroid stimulating hormone

An immunoassay method based on the peak shift of the localized surface plasmon resonance (LSPR) absorption maxima has been developed for the determination of the thyroid stimulating hormone (TSH) in human blood serum. The anti-TSH antibody was adsorbed on the synthesized gold nanoparticles by electrostatic forces. The efficiency of the nanobiosensor was improved by optimizing the factors affecting the probe construction such as the pH and the antibody to gold nanoparticles ratio. Dynamic light scattering was applied for the characterization of the constructed probe. The amount of peak shift of the LSPR absorption maxima was selected as the basis for determination of TSH antigen. The linear dynamic range of 0.4–12.5 mIU L⁻¹ and the calibration sensitivity of 1.71 L mIU⁻¹ were obtained. The human control serum sample was analyzed for TSH by constructed nanobiosensor and the acceptable results were obtained.     

Conformational plasticity of RNA for target recognition as revealed by the 2.15?? crystal structure of a human IgG–aptamer complex

Aptamers are short single-stranded nucleic acids with high affinity to target molecules and are applicable to therapeutics and diagnostics. Regardless of an increasing number of reported aptamers, the structural basis of the interaction of RNA aptamer with proteins is poorly understood. Here, we determined the 2.15 Å crystal structure of the Fc fragment of human IgG1 (hFc1) complexed with an anti-Fc RNA aptamer. The aptamer adopts a characteristic structure fit to hFc1 that is stabilized by a calcium ion, and the binding activity of the aptamer can be controlled many times by calcium chelation and addition. Importantly, the aptamer–hFc1 interaction involves mainly van der Waals contacts and hydrogen bonds rather than electrostatic forces, in contrast to other known aptamer–protein complexes. Moreover, the aptamer–hFc1 interaction involves human IgG-specific amino acids, rendering the aptamer specific to human IgGs, and not crossreactive to other species IgGs. Hence, the aptamer is a potent alternative for protein A affinity purification of Fc-fusion proteins and therapeutic antibodies. These results demonstrate, from a structural viewpoint, that conformational plasticity and selectivity of an RNA aptamer is achieved by multiple interactions other than electrostatic forces, which is applicable to many protein targets of low or no affinity to nucleic acids.     

应用SELEX技术筛选人类血型IgG适体的实验研究

目的:建立Rh(D)血型的IgG类抗体适体的筛选方法,为后续合成适体并进行新生儿溶血病的防治研究奠定基础。方法:利用SELEX技术,构建含有52个随机序列的单链DNA文库,利用硝酸纤维素膜法筛选与IgG类抗体分子高亲和力结合的核酸分子,同时探索并优化将其扩增为双链DNA核酸库的PCR反应条件;通过膜结合实验检测核酸分子的富集效果并用凝胶阻滞实验初步测定所得核酸适体与Rh(D)血型IgG类抗体的亲和力。结果:随着筛选的进行,核酸分子的富集库向着与靶分子亲和性增强的方向进化,经过了11个循环,筛选出与Rh(D)血型IgG抗体结合力较强的核酸分子,与核酸结合的IgG分子在凝胶阻滞实验中显示出阻滞带。结论:初步建立了利用SELEX技术筛选人类Rh(D)血型IgG抗体适体的方法。     

Plasmonic Biosensor Based on Triangular Au/Ag and Au/Ag/Au Core/Shell Nanoprisms onto Indium Tin Oxide Glass

Gold–silver core–shell triangular nanoprisms (Au/AgTNPs) were grown onto transparent indium tin oxide (ITO) thin film-coated glass substrate through a seed-mediated growth method without using peculiar binder molecules. The resulting Au/AgTNPs were characterized by scanning electron microscopy, atomic force microscopy, X-ray diffraction, UV–vis spectroscopy, and cyclic voltammograms. The peak of dipolar plasmonic resonance was located at near infrared region of ～700 nm, which showed the refractive index (RI) sensitivity of 248 nm/RIU. Moreover, thin gold shells were electrodeposited onto the surface of Au/AgTNPs in order to stabilize nanoparticles. Compared with the Au/AgTNPs, this peak of localized surface plasmon resonance (LSPR) was a little red-shift and decreased slightly in intensity. The refractive index sensitivity was estimated to be 287 nm/RIU, which showed high sensitivity as a LSPR sensing platform. Those triangular nanoprisms deposited on the ITO substrate could be further functionalized to fabricate LSPR biosensors. Results of this research show a possibility of improving LSPR sensor by using core–shell nanostructures.     

Investigation of the Plasmonic Interaction of Gold Nanoparticles Toward Plasmonic Photothermal Therapeutics

Plasmonic interaction of nanoparticles located in close proximity, embedded in breast tissue, is simulated for estimating the optical characteristics like optical absorption cross-section, plasmonic wavelength as well as full-width half maxima (FWHM). The computations are done for the monomers, homodimers, and heterodimers of spherical and rod-shaped gold nanoparticles considering various interparticle spacings for gold nanospheres and the interparticle spacing as well as the orientation for gold nanorods (GNRs). The results indicate that for the spherical dimer, with the change in interparticle spacing from 1 to 20 nm, the peak absorption cross-section decreases by 43%. Whereas for the GNRs, the absorption cross-section increases/decreases, within 9–18%, depending on the homodimer or heterodimer configuration. Furthermore, secondary peaks for the absorption cross-section are obtained within wavelengths of 630–940 nm due to antibonding modes for GNR heterodimers. For GNR heterodimer located end-to-end, this secondary peak for the absorption cross-section appears at 780 nm irrespective of interparticle spacing within 1–5 nm. The absorption coefficient is considerably dependent on the configuration and proximity of GNRs located within the tissue. While FWHM is not significantly influenced by GNRs configuration and interparticle spacing. For interparticle spacing from 1 to 20 nm, the plasmonic wavelength shifts by 38 nm for the spherical dimer and by 35–86 nm for various GNR dimers. The findings of this study are useful for plasmonic photothermal therapeutics as the heat generation is governed by the resulting absorption cross-section due to plasmonic coupling of the closely spaced and different orientations of the nanoparticles.

     

Surface Plasmon Coupling Effect of Gold Nanoparticles with Different Shape and Size on Conventional Surface Plasmon Resonance Signal

The labeling strategy with gold nanoparticles for the conventional surface plasmon resonance (SPR) signal enhancement has been frequently used for the sensitive determination of small molecules binding to its interaction partners. However, the influence of gold nanoparticles with different size and shape on SPR signal is not known. In this paper, three kinds of gold nanoparticles, namely nanorods, nanospheres, and nanooctahedrons with different size, were prepared and used to investigate their effects on the conventional SPR signal at a fixed excitation wavelength 670 nm. It was found that the SPR signal (i.e., resonant angle shift) was varied with the shapes and sizes of gold nanoparticles in suspension at a fixed concentration due to their different plasmon absorbance bands. For gold nanorods with different longitudinal absorbance bands, three conventional SPR signal regions could be clearly observed when the gold nanorod suspensions were separately introduced onto the SPR sensor chip surface. One region was the longitudinal absorbance bands coinciding with or close to the SPR excitation wavelength that suppressed the SPR angle shift. The second region was the longitudinal absorbance bands at 624 to 639 and 728 to 763 nm that produced a moderate increase on the SPR resonant angle shift. The third region was found for the longitudinal absorbance bands from 700 to 726 nm that resulted in a remarkable increase in the SPR angle shift responses. This phenomenon can be explained on the basis of calculation of the correlation of SPR angle shift response with the gold nanorod longitudinal absorbance bands. For nanospheres and nanooctahedrons, the SPR angle shift responses were found to be particle shape and size dependent in a simple way with a sustaining increase when the sizes of the nanoparticles were increased. Consequently, a guideline for choosing gold nanoparticles as tags is suggested for the SPR determination of small molecules with binding to the immobilized interaction partners.     

Investigation of Gold and Silver Nanoparticles on Absorption Heating and Scattering Imaging

Efficient conversion of absorbed light to heat energy and strong scattering by gold and silver nanoparticles suggest these nanoparticles as the agents of heating and imaging. Absorption efficiency and scattering efficiency of gold and silver nanoparticles were studied through numerical simulation using the discrete dipole approximation method. This study shows that the size of gold and silver nanoparticles can effect gold and silver nanoparticles’ absorption efficiency and scattering efficiency. The gold nanoparticle is found to possess the maximum absorption efficiency when the size of gold nanoparticle is 50 nm and the incident wavelength is 540 nm, and the increasing scattering efficiency with the increasing size of gold nanoparticle in the medium, and refractive index of the medium is around 1.33. However, the silver nanoparticle owns the maximum absorption efficiency when the size of silver nanoparticle is 20 nm and the incident wavelength is 396 nm, and the maximum scattering efficiency when the size of silver nanoparticle is 30 nm and the incident wavelength is 410 nm in the same medium. The conditions for achieving the maximum adsorption efficiency and scattering efficiency of gold and silver nanoparticle can be used for heating and imaging using visible and near-infrared light.     

Theoretical Study of the Anchoring Influence on Plasmonic Resonance Tunability of Metallic Nanoparticles Embedded in a Liquid Crystal Cell

In this paper, the localized surface plasmon resonance (LSPR) peak position of an ordered gold nanoparticles array embedded in a nematic liquid crystal (LC) media is investigated using finite-difference time-domain method. The influence of the anchoring effects between nematic LC molecules and glass substrate on the shift of LSPR wavelength is taken into account, and results are compared with the case of a perfect alignment of the LC molecules.     

Selection and characterization of DNA aptamers with binding selectivity to Campylobacter jejuni using whole-cell SELEX

The need for pre-analytical sample processing prior to the application of rapid molecular-based detection of pathogens in food and environmental samples is well established. Although immunocapture has been applied in this regard, alternative ligands such as nucleic acid aptamers have advantages over antibodies such as low cost, ease of production and modification, and comparable stability. To identify DNA aptamers demonstrating binding specificity to Campylobacter jejuni cells, a whole-cell Systemic Evolution of Ligands by EXponential enrichment (SELEX) method was applied to a combinatorial library of FAM-labeled single-stranded DNA molecules. FAM-labeled aptamer sequences with high binding affinity to C. jejuni A9a as determined by flow cytometric analysis were identified. Aptamer ONS-23, which showed particularly high binding affinity in preliminary studies, was chosen for further characterization. This aptamer displayed a dissociation constant (K _d value) of 292.8 ± 53.1 nM with 47.27 ± 5.58% cells fluorescent (bound) in a 1.48-μM aptamer solution. Binding assays to assess the specificity of aptamer ONS-23 showed high binding affinity (25–36%) for all other C. jejuni strains screened (inclusivity) and low apparent binding affinity (1–5%) with non-C. jejuni strains (exclusivity). Whole-cell SELEX is a promising technique to design aptamer-based molecular probes for microbial pathogens without tedious isolation and purification of complex markers or targets.     

Silica nanoparticles based label-free aptamer hybridization for ATP detection using hoechst33258 as the signal reporter

In this work, we have developed a simple and sensitive method for ATP detection using silica nanoparticles (NPs) as the platform and hoechst33258 as the signal reporter. The ATP-binding aptamers hybridize with the probe DNA (DNA(p)) immobilized NPs to form the aptamer/DNA(p) duplex on the NPs surface. The conformational change of the aptamer leads to the decrease of the aptamer/DNA(p) duplex on the NPs due to the ATP-binding aptamer switches its structure from the aptamer/DNA(p) duplex to the aptamer/target complex in the presence of ATP. ATP detection can be easily realized by separating the silica nanoparticles and adding the hoechst33258 of intercalating to aptamer/DNA(p) (dsDNA). Good selectivity between ATP and CTP, GTP or UTP has been demonstrated, which is due to the specific recognition between ATP aptamer and ATP. The K(d) was estimated to be ～1mM from 0 to 4mM and a liner response was observed from 0 to 0.2mM with a detection limit of ～20μM. Compared with other methods, the carboxyl-modified silica nanoparticles (～60nm) prepared by the reverse microemulsion method can serve as a stable and sensitive sensor platform because of their smaller size and facile conjugation with amine-containing molecules. In addition, the high sensitivity and selectivity of hoechst33258 was employed for the ssDNA and dsDNA determination, which takes advantage of the label-free aptamer and lower cost.     

The in vitro inhibition effect of 2 nm gold nanoparticles on non-enzymatic glycation of human serum albumin

The reaction of amino groups of protein and the carbonyl groups of reducing sugar molecules, non-enzymatically induce a series of chemical reactions that form a heterogeneous group of compounds known as advanced glycation end products (AGEs). The accumulation of AGEs is associated with various disease conditions that include complications in diabetes, Alzheimer's disease and aging. The current study monitored the extent of non-enzymatic glycation of human serum albumin (HSA) in order to estimate the formation of HSA related AGEs in the presence of 2 nm gold nanoparticles. The rate of glycation was evaluated using several analytical methods. Physiological concentrations of HSA and glyceraldehyde mixtures, incubated with various concentrations of negatively charged 2 nm gold nanoparticles, resulted in a lower reaction rate than mixtures without 2GNP. Moreover, increasing concentrations of gold nanoparticles exhibited a pronounced reduction in AGE formation. High performance liquid chromatography, UV-visible spectroscopy and circular dichroism analytical methods provide reliable techniques for evaluating AGE formation of HSA adducts.     

Colorimetric detection of bisphenol A based on unmodified aptamer and cationic polymer aggregated gold nanoparticles

In this study, a colorimetric method was exploited to detect bisphenol A (BPA) based on BPA-specific aptamer and cationic polymer-induced aggregation of gold nanoparticles (AuNPs). The principle of this assay is very classical. The aggregation of AuNPs was induced by the concentration of cationic polymer, which is controlled by specific recognition of aptamer with BPA and the reaction of aptamer and cationic polymer forming “duplex” structure. This method enables colorimetric detection of BPA with selectivity and a detection limit of 1.50 nM. In addition, this colorimetric method was successfully used to determine spiked BPA in tap water and river water samples.     

Production of polycaprolactone nanoparticles with hydrodynamic diameters below 100 nm

Cancer is a worldwide increasing burden and its therapy is often challenging and causes severe side effects in healthy tissue. If drugs are loaded into nanoparticles, side effects can be reduced, and efficiency can be increased via the enhanced permeability and retention effect. This effect is based on the fact that nanoparticles with sizes from 10 to 200 nm can accumulate in tumor tissue due to their leaky vasculature. In this work, we produced polycaprolactone (PCL) in the sizes 1.8, 5.4, and 13.6 kDa and were able to produce spherical shaped nanoparticles with mean diameters of 64 ± 19 nm out of the PCL_5.4 and 45 ± 8 nm out of the PCL_13.6 reproducibly. By encapsulation of paclitaxel the diameter of that nanoparticles did not increase, and we were able to encapsulate 73 ± 7 fmol paclitaxel per 1000 particles in the PCL_5.4‐nanoparticles and 35 ± 8 fmol PTX per 1000 PCL_13.6‐nanoparticles. Furthermore, we coupled the aptamer S15 to preformed PCL_5.4‐nanoparticles resulting in particles with a hydrodynamic diameter of 153 nm. This offers the opportunity to use these nanoparticles for targeted drug delivery.