Design,Analysis, and Characterization of Designer Surface Plasmon Polariton-Based Dual-Band Antenna

This paper reports development, design, and analysis of designer (or spoof) surface plasmon polariton-based feeding configuration to excite a dual-band antenna. As an example, a planar transverse electric and magnetic horn antenna is designed and fed by the proposed transition structure. Designer surface plasmon polariton modes are supported by a metal surface at microwave frequency when it is corrugated with periodical grooves. An efficient transition for converting quasi-transverse electric and magnetic waves of microstrip line into spoof surface plasmon polariton (SSPP) waves has been designed in microwave frequency range using periodically corrugated metal strip. SSPP wave is confined at the teeth part of the corrugation. Simulated and measured reflection and transmission characteristics are in good agreement. The spoof SPP-fed dual-band antenna is designed, fabricated, and characterized in microwave anechoic chamber and measured results are coincident with simulated results.     

Structure Metallic Surface for Terahertz Plasmonics

Plasmonics is the field of study of the interaction between incident light and electrons in metals. It is used widely for developing nanophotonic devices. The structured metallic surface such as metamaterials can be used to produce spoof surface plasmons at any frequencies with the dimensions of unit cell less than the incident wavelength. Terahertz plasmonics is attracted to the field of research since it is used for sensing biological components even in a weak environment. The issue with planar metamaterials is a lower quality factor value. Several methods have been adopted for obtaining high Q-value in metamaterials. Among them, Fano- and Toroidal-based metamaterials offer high Q-factor and string localized field enhancement. This article discusses the importance and developments in the field of high-Q terahertz metamaterial for plasmonics applications. The nonlinear responses of terahertz metamaterial under high-intense THz pulses are also discussed.

     

Enhancing the Dual-Band Guiding Capabilities of Coaxial Spoof Plasmons via use of Transmission Line Concepts

We derive closed analytical forms for the response of coaxial spoof plasmons, aided by transmission line concepts under the effective complex surface impedance framework. This constitutes a powerful platform to improve as well as to elucidate designs with enhanced performances. In particular, we propose a dual-band spoof plasmon waveguiding geometry with the higher order slow-wave mode operating well below the regime governed by dispersion of periodic guides (Bragg reflections at Brillouin zone boundaries), that is, diffraction. The analysis is supported by eigen mode numerical calculations. As an example in a waveguide device context, we demonstrate the dual-band planar routing ability of elliptical–coaxial cable-based spoof plasmons along a straight chain as well as a Y-splitter.     

Leaky Wave Antenna Based on Periodically Truncated SSPP Waveguide

Plasmonics - The guided waveguide structures based on surface plasmons can be used to miniaturize microwave devices. By simply introducing a series of periodic truncation slits in the SSPP (spoof...     

Ultra-compact Spatial Terahertz Switch Based on Graphene Plasmonic-Coupled Waveguide

We are proposing graphene (G)-based multilayered plasmonic spatial switch, operating at 10 THz. It is composed of hBN/Ag/hBN/G/hBN/G/hBN/SiO₂/p⁺-Si multilayers. When a 10-THz transverse magnetic (TM)-polarized signal is normally incident upon the structure top surface, the nanoaperture devised in the Ag nanolayer, acting as a grating, excites surface plasmons at the top graphene micro-ribbons/hBN interface. These surface plasmons depending on the graphenes chemical potentials can be coupled to the lower-right or left graphene micro-ribbons and continue to propagate laterally towards the corresponding output port. Numerical simulations show that a change of ∆V_G ≈ ± 2.7 V in the voltage, applied to the gated micro-ribbons, can modulate their chemical potentials sufficiently to switch the right (left) output port from ON (OFF) to OFF(ON) and vice versa. Besides its low power consumption, the switch ultra-small dimensions make it a potential spatial router suitable for THz-integrated circuit applications.

     

Low-Frequency Surface Plasmon Polaritons Guided on a Corrugated Metal Striplines with Subwavelength Periodical Inward Slits

A new type of stripline-based microwave transmission, which has relatively lower crosstalk compared with the conventional striplines, is proposed. The structure is formed by corrugated inward slit that is subwavelength scale on the edge of the stripline via the photolithography techniques. Numerical simulation is used to analyze the transmission and dispersion properties of this new stripline structure, and the results are experimentally verified in the frequency range from 200 MHz to 8 GHz. We found that spoof surface plasmon polaritons are supported on the new stripline structure whose electromagnetic fields are highly localized near the stripline, and hence the coupling is suppressed between the present type of stripline and the conventional stripline. For a structured stripline and a conventional stripline which are parallelly placed and separated by a distance of the stripline width, the crosstalk between them ranges from −17.13 to −64.89 dB, which is much lower than the crosstalk between two coupled conventional striplines. As this new type of stripline has such an important advantage, it would be applicable to high-density microwave circuits or high-speed circuits.     

Spoof Localized Surface Plasmons Excited by Plasmonic Waveguide Chip with Corrugated Disk Resonator

We designed and fabricated a millimeter plasmonic chip consisted of coplanar waveguide (CPW) and plasmonic waveguide with one corrugated disk resonator (CDR). The spoof localized surface plasmon (LSP) resonance modes can be excited by the interaction between plasmonic waveguide and CDR. Fundamental and higher order sharp spoof LSP resonances (from dipole to dodecapole) were observed in the transmission coefficient spectrum. The Q-value as high as 268.3 (octupole) was experimentally obtained. Experimental results show good agreement with theoretical and simulated ones. All the results may have potential applications in microchip based sensing and filtering.     

Multilayer Hybrid Plasmonic Nano Patch Antenna

This is the first report of a hybrid plasmonic nano patch antenna having metal insulator metal (HMIM) multilayer configuration. It is designed in a footprint area of 1.7 × 1.175 μm² to resonate at 1.55 μm wavelength. The proposed antenna is inset fed by an HMIM plasmonic waveguide for achieving proper impedance matching. It is observed, through electromagnetic numerical simulation, that the proposed plasmonic nano patch antenna emits a directional beam with a bandwidth, gain, and efficiency of 0.194 μm, 8.3 dB, and 96% respectively, which are significantly higher than previously reported designs. Since inset-fed antennas are suitable for developing high-gain antenna array, hence further, we examined antenna performance by designing antenna array. The proposed antenna is practically realizable and can be fabricated using standard semiconductor fabrication process. Moreover, it could be used for numerous chip scale applications such as wireless interconnects energy harvesting, photoemission, photo detection, scattering, heat transfer, spectroscopy, and optical sensing.

     

Metasurface Reflector (MSR) Loading for High Performance Small Microstrip Antenna Design

A meander stripline feed multiband microstrip antenna loaded with metasurface reflector (MSR) structure has been designed, analyzed and constructed that offers the wireless communication services for UHF/microwave RFID and WLAN/WiMAX applications. The proposed MSR assimilated antenna comprises planar straight forward design of circular shaped radiator with horizontal slots on it and 2D metasurface formed by the periodic square metallic element that resembles the behavior of metamaterials. A custom made high dielectric bio-plastic substrate (ε_r = 15) is used for fabricating the prototype of the MSR embedded planar monopole antenna. The details of the design progress through numerical simulations and experimental results are presented and discussed accordingly. The measured impedance bandwidth, radiation patterns and gain of the proposed MSR integrated antenna are compared with the obtained results from numerical simulation, and a good compliance can be observed between them. The investigation shows that utilization of MSR structure has significantly broadened the -10dB impedance bandwidth than the conventional patch antenna: from 540 to 632 MHz (17%), 467 to 606 MHz (29%) and 758 MHz to 1062 MHz (40%) for three distinct operating bands centered at 0.9, 3.5 and 5.5 GHz. Additionally, due to the assimilation of MSR, the overall realized gains have been upgraded to a higher value of 3.62 dBi, 6.09 dBi and 8.6 dBi for lower, middle and upper frequency band respectively. The measured radiation patterns, impedance bandwidths (S11<-10 dB) and gains from the MSR loaded antenna prototype exhibit reasonable characteristics that can satisfy the requirements of UHF/microwave (5.8 GHz) RFID, WiMAX (3.5/5.5 GHz) and WLAN (5.2/5.8 GHz) applications.     

Ring Gap Resonance Modes on Disk/Film Coupling System Caused by Strong Plasmon Interaction

Ring modes with large wave vectors cannot be easily excited on a single disk by the plane wave illumination with the polarization parallel to the disk interface. In this work, we show that special antisymmetric ring gap modes on the surface of the disk in close proximity to the metallic thin film can be excited in the visible light region of the electromagnetic spectrum. In the presence of the film, the strong plasmon interaction between disk and film causes ring gap modes to have lower energies and be more easily excited. We apply the plasmon hybridization method to illustrate the ring gap modes arising from the interaction between the localized disk plasmons and the continuum surface plasmons. The calculated hybridization data show good agreement with the results of finite element simulations. The excitation of ring gap modes provides further insight into the strong coupling of plasmons and the design of novel nanostructures.

     

Two-Dimensional Analogies to Frequency-Selective Surfaces (FSS) on the Graphene Sheet

In this paper, we propose that two-dimensional analogies to frequency-selective surfaces (FSS) can be achieved on graphene surfaces based on transformation optics. The analogies to representative FSS structures, including the anti-reflecting coating (ARC) and the high-reflecting coating (Bragg reflector), have been investigated through both analytical effective-index method (EIM)/transfer-matrix method (TMM) and numerical simulations. Both analytical and numerical solutions have shown that the propagation of plasmons on graphene surface with periodic chemical potentials can be an analogy to the interaction of incident light with traditional FSS multilayer dielectric media in which the transmission or reflection can be obtained by EIM/TMM. Combined with the tunability of graphene, the transmission or reflection of plasmons can be tuned by adjusting the bias voltage. The proposed structures and theoretical methods may provide new visions for achieving two-dimensional analogies to traditional structures on graphene.

     

Plasmon-Enhanced Fluorescence Biosensors: a Review

Surfaces of metallic films and metallic nanoparticles can strongly confine electromagnetic field through its coupling to propagating or localized surface plasmons. This interaction is associated with large enhancement of the field intensity and local optical density of states which provides means to increase excitation rate, raise quantum yield, and control far field angular distribution of fluorescence light emitted by organic dyes and quantum dots. Such emitters are commonly used as labels in assays for detection of chemical and biological species. Their interaction with surface plasmons allows amplifying fluorescence signal (brightness) that accompanies molecular binding events by several orders of magnitude. In conjunction with interfacial architectures for the specific capture of target analyte on a metallic surface, plasmon-enhanced fluorescence (PEF) that is also referred to as metal-enhanced fluorescence (MEF) represents an attractive method for shortening detection times and increasing sensitivity of various fluorescence-based analytical technologies. This review provides an introduction to fundamentals of PEF, illustrates current developments in design of metallic nanostructures for efficient fluorescence signal amplification that utilizes propagating and localized surface plasmons, and summarizes current implementations to biosensors for detection of trace amounts of biomarkers, toxins, and pathogens that are relevant to medical diagnostics and food control.

     

Limitations of Incident Power Density as a Proxy for Induced Electromagnetic Fields

The most recent safety guidelines define basic restrictions for electromagnetic field exposure at frequencies more than 6 GHz in terms of spatial- and time-averaged transmitted power density inside the body. To enable easy-to-perform evaluations in situ, the reference levels for the incident power density were derived. In this study, we examined whether compliance with the reference levels always ensures compliance with basic restrictions. This was evaluated at several distances from different antennas (dipole, loop, slot, patch, and helix). Three power density definitions based on integration of the perpendicular real part of the Poynting vector, the real part of its three vector components, and its modulus were compared for averaging areas of λ²/16, 4 cm² (below 30 GHz) and 1 cm² (30 GHz). In the reactive near-field (d < λ/(2π)), the transmitted power density can be underestimated if an antenna operates at the free space exposure limit. This underestimation may exceed 6 dB (4.0 times) and depends on the field source due to different coupling mechanisms. It is frequency-dependent for fixed-size averaging areas (4 and 1 cm²). At larger distances, transmission can be larger than the theoretical plane-wave transmission coefficient due to backscattering between the body and field source. Using the modulus of the incident Poynting vector yields the smallest underestimation. © 2020 Bioelectromagnetics Society.     

Efficient Extraction of Fluorescence Emission Utilizing Multiple Surface Plasmon Modes from Gold Wire Gratings

We demonstrate directional enhanced fluorescence emission from fluorophores located above gold wire gratings. In contrast to previous studies on corrugated films, efficient coupling was recorded for multiple plasmon modes associated with both the active and substrate side of the wires. This difference is likely due to the subtle differences in how light interacts with corrugated films versus metal films with periodic subwavelength slots. For corrugated films, coupling between modes on opposite sides of the grating are out of phase, and therefore plasmon modes on the opposite side of the grating are only weakly excited. For wire gratings, transmission and reflection features have been modeled well with a dynamical diffraction model that includes surface plasmons, which allows for efficient coupling to surface plasmon modes on both sides of the grating. We also compared the two mechanisms for fluorescent enhancement, namely the intense electromagnetic field associated with surface plasmons and excited fluorophores radiating via surface plasmon modes. We found the latter mechanism clearly dominant.     

Reconfigurable tapered coaxial slot antenna for hepatic microwave ablation

ABSTRACT

Microwave ablation is rapidly being rediscovered and developed for treating many cancers of liver, lung, kidney and bone, as well as arrhythmias and other medical conditions. The microwaves ablate tissue by heating it to cytotoxic temperatures. The microwave antenna design suffers the challenges of effective coupling and penetration into body tissues, uncontrolled power deposition due to applicator construction limitations affecting uniform heating of target region, and narrowband operation leading to mismatch for many patients and detrimental heating. To meet out the requirements of wideband operation and localized lesion reconfigurable linearly tapered slot interstitial wideband antenna has been proposed for working in the 1.38?GHz to 4.31?GHz frequency band. The performance of the antenna is evaluated by using FEM-based HFSS software. The slot height and taper height are reconfigured for parametric analysis achieving maximum impedance matching and spherical ablation zone without requiring any additional adjustable structures. The tapering of the slot in coaxial antenna generates current distribution at the edges of the slot for maximizing specific absorption rate.     

Design and Dosimetric Characterization of a Broadband Exposure Facility for In Vitro Experiments in the Frequency Range 18–40.5 GHz

A novel exposure facility for exposing cell monolayers to centimeter and millimeter waves (18–40.5 GHz) used by future 5G mobile communication technology and similar applications has been developed. A detailed dosimetric characterization of the apparatus for frequencies of 27 and 40.5 GHz and 60 mm petri dishes, used in a presently ongoing study on human dermal fibroblasts and keratinocytes, was carried out. The exposure facility enables a well-defined, randomized, and blinded application of sham exposure and exposure with selectable values of incident power flux density, and additionally provides the possibility of continuous monitoring of the sample temperature during exposure while it does not require significant deviations from routine in vitro handling procedures, i.e. petri dishes are not required to be placed inside waveguides or TEM cells. Mean specific absorption rate (SAR) values inside the cell monolayer of 115 W/kg (27 GHz) and 160 W/kg (40.5 GHz) per watt antenna input power and corresponding transmitted power density (S_t) values at the bottom of the cell monolayer of 65 W/m² (27 GHz) and 70 W/m² (40.5 GHz) per watt antenna input power can be achieved, respectively. For reasonable amounts of harvested cells (80% of petri dish bottom area), the variation (max/min) of SAR and S_t over the cell monolayer remains below 3.7 dB (27 GHz) and 3.0 dB (40.5 GHz), respectively. © 2021 Bioelectromagnetics Society.     

Dipole Decay Rates Engineering via Silver Nanocones

A full control of the interaction between confined plasmons and point sources of radiation is a central issue in molecular plasmonics. In this paper, a theoretical contribution towards a physical understanding on the localized surface plasmons excited into metallic nanocones by a point dipole is given. A numerical approach based on the discrete dipole approximation is applied to determine the modifications of the dipole decay rates for varying geometrical parameters of the dipole-metal nanoparticle system. Results declare the centrality of the cone aperture to control the plasmon resonances and to handle the effects it induces on the lifetime of a point emitter. A full spectral tuning of the resonances in the decay rates can be achieved by operating on a unique spatial degree of freedom: by tailoring the aperture alone, total decay rates 10⁵ times higher than the free-space value can be obtained at short distances from the metal in a large region of the spectral range. Quite unexpectedly, size dependence of the antenna is found to have a marginal role if only a lifetime manipulation is desired. It becomes, instead, a crucial aspect of the problem when large quantum yields are required. Results presented in this work shed light on spontaneous emission modification due to interaction with plasmonic nanocones of different shapes and are relevant for a number of applications in the fields of nanoplasmonics and fluorescence microscopy.     

Experimental Demonstration of Spoof Surface Plasmon Based THz Antennas for Huge Electric Field Enhancement

Plasmonics - We experimentally demonstrate the fabrication and optical measurement of a novel terahertz antenna array due to the excitation of spoof surface plasmon modes. With the unit cell...     

A new traffic congestion prediction strategy (TCPS) based on edge computing

Real-time accurate traffic congestion prediction can enable Intelligent traffic management systems (ITMSs) that replace traditional systems to improve the efficiency of traffic and reduce traffic congestion. The ITMS consists of three main layers, which are: Internet of Things (IoT), edge, and cloud layers. Edge can collect real-time data from different routes through IoT devices such as wireless sensors, and then it can compute and store this collected data before transmitting them to the cloud for further processing. Thus, an edge is an intermediate layer between IoT and cloud layers that can receive the transmitted data through IoT to overcome cloud challenges such as high latency. In this paper, a novel real-time traffic congestion prediction strategy (TCPS) is proposed based on the collected data in the edge’s cache server at the edge layer. The proposed TCPS contains three stages, which are: (i) real-time congestion prediction (RCP) stage, (ii) congestion direction detection (CD²) stage, and (iii) width change decision (WCD) stage. The RCP aims to predict traffic congestion based on the causes of congestion in the hotspot using a fuzzy inference system. If there is congestion, the CD² stage is used to detect the congestion direction based on the predictions from the RCP by using the Optimal Weighted Naïve Bayes (OWNB) method. The WCD stage aims to prevent the congestion occurrence in which it is used to change the width of changeable routes (CR) after detecting the direction of congestion in CD². The experimental results have shown that the proposed TCPS outperforms other recent methodologies. TCPS provides the highest accuracy, precision, and recall. Besides, it provides the lowest error, with values equal to 95%, 74%, 75%, and 5% respectively.

     

Tunable Localized Surface Plasmon Resonances in a New Graphene-Like Si2BN’s Nanostructures

The optical response of a new graphene-like material Si₂BN’s nanostructures and some kinds of hybrid structures formed by Si₂BN and metal nanoparticles was studied by using time-dependent density functional theory (TDDFT). We found that the periodic structures of Si₂BN have wider absorption ranges than graphene. When the impulse excitation polarizes in different directions (armchair-edge direction and zigzag-edge direction), the absorption spectra of Si₂BN nanostructures would be different (optical anisotropy). And in the hybrid structures, the increase of metal nanoparticles’ number brings the absorption intensity strengthening and red shift, which means a stronger ability of localized surface plasmon tuning. Also, the different metal nanoparticles were used to form the hybrid structures; they show an obviously different property as well. In addition, in the kinds of situations mentioned above, the plasmons were produced in visible region. This investigation provides an improved understanding of the plasmon enhancement effect in graphene-like photoelectric devices.