Interface-Induced Ag Monolayer Film for Surface-Enhanced Raman Scattering Detection of Water-Insoluble Enrofloxacin

Water-insoluble molecules usually show poor surface-enhanced Raman scattering (SERS) signals, because they are hardly adsorbed on the surface of most commonly used SERS substrates, such as aqueous Ag or Au colloids. In this work, a highly sensitive and reproducible Ag monolayer film (Ag MLF) SERS substrate prepared by self-assembly of Ag nanoparticles (Ag NPs) on water/oil interface can realize the trace SERS detection of water-insoluble enrofloxacin. The positively charged phase transfer catalyst can transfer the negatively charged Ag nanoparticles in aqueous solution to the water/oil interface. At the same time, the water-insoluble enrofloxacin can also be attracted to the interface because of its lipophilic group. The type/volume of the oil phase and phase transfer catalyst and the vortex mixing time were all optimized to maximize the SERS effect of Ag MLF. Results showed that trace water-insoluble enrofloxacin can be identified by Ag MLF and its detection sensitivity was significantly improved. The proposed novel Ag MLF can be further applied to detect other water-insoluble molecules in SERS.

     

Retarded Charge–Carrier Recombination in Photoelectrochemical Cells from Plasmon‐Induced Resonance Energy Transfer

N‐type metal oxides such as hematite (α‐Fe₂O₃) and bismuth vanadate (BiVO₄) are promising candidate materials for efficient photoelectrochemical water splitting; however, their short minority carrier diffusion length and restricted carrier lifetime result in undesired rapid charge recombination. Herein, a 2D arranged globular Au nanosphere (NS) monolayer array with a highly ordered hexagonal hole pattern (hereafter, Au array) is introduced onto the surface of photoanodes comprised of metal oxide films via a facile drying and transfer‐printing process. Through plasmon‐induced resonance energy transfer, the Au array provides a strong electromagnetic field in the near‐surface area of the metal oxide film. The near‐field coupling interaction and amplification of the electromagnetic field suppress the charge recombination with long‐lived photogenerated holes and simultaneously enhance the light harvesting and charge transfer efficiencies. Consequently, an over 3.3‐fold higher photocurrent density at 1.23 V versus reversible hydrogen electrode (RHE) is achieved for the Au array/α‐Fe₂O₃. Furthermore, the high versatility of this transfer printing of Au arrays is demonstrated by introducing it on the molybdenum‐doped BiVO₄ film, resulting in 1.5‐fold higher photocurrent density at 1.23 V versus RHE. The tailored metal film design can provide a potential strategy for the versatile application in various light‐mediated energy conversion and optoelectronic devices.     

Systematic Study on the Self-Assembled Hexagonal Au Voids,Nano-Clusters and Nanoparticles on GaN (0001)

Au nano-clusters and nanoparticles (NPs) have been widely utilized in various electronic, optoelectronic, and bio-medical applications due to their great potentials. The size, density and configuration of Au NPs play a vital role in the performance of these devices. In this paper, we present a systematic study on the self-assembled hexagonal Au voids, nano-clusters and NPs fabricated on GaN (0001) by the variation of annealing temperature and deposition amount. At relatively low annealing temperatures between 400 and 600°C, the fabrication of hexagonal shaped Au voids and Au nano-clusters are observed and discussed based on the diffusion limited aggregation model. The size and density of voids and nano-clusters can systematically be controlled. The self-assembled Au NPs are fabricated at comparatively high temperatures from 650 to 800°C based on the Volmer-Weber growth model and also the size and density can be tuned accordingly. The results are symmetrically analyzed and discussed in conjunction with the diffusion theory and thermodynamics by utilizing AFM and SEM images, EDS maps and spectra, FFT power spectra, cross-sectional line-profiles and size and density plots.     

Application of AAO Matrix in Aligned Gold Nanorod Array Substrates for Surface-Enhanced Fluorescence and Raman Scattering

In this paper, we probed surface-enhanced Raman scattering (SERS) and surface-enhanced fluorescence (SEF) from probe molecule Rhodamine 6G (R6G) on self-standing Au nanorod array substrates made using a combination of anodization and potentiostatic electrodeposition. The initial substrates were embedded within a porous alumina template (AAO). By controlling the thickness of the AAO matrix, SEF and SERS were observed exhibiting an inverse relationship. SERS and SEF showed a non-linear response to the removal of AAO matrix due to an inhomogeneous plasmon activity across the nanorod which was supported by FDTD calculations. We showed that by optimizing the level of AAO thickness, we could obtain either maximized SERS, SEF or simultaneously observe both SERS and SEF together.     

Simultaneous Photoluminescence and SERS Observation of Nanodiamond at Laser Deposition on Noble Metals

The metal-modified luminescence and surface-enhanced Raman scattering (SERS) occurring near nanostructured surfaces of noble metals recently have been observed for different kinds of nanocrystals associated with the metal nanostructures. In the present work, the photoluminescence and Raman scattering of diamond nanocrystals of sizes 100 and 300 nm patterned on Ag and Au thin nanostructured films via laser accelerated deposition using a femtosecond laser are discussed. The laser accelerated deposition forms ordered periodical nanodiamond–metal nanostructures and allows adjusting the interaction between nanodiamond and metal by varying the laser acceleration parameters as well as by using different metals (Ag and Au), and varying the structure of the metal film. Correspondingly, the spectroscopic properties of the system determined by interaction between nanoparticles and metal are tuned. The enhancement of nanodiamond photoluminescence together with SERS of graphite fraction and disordered carbon of nanodiamonds are observed for nanodiamond–Ag structures at 488- and 532-nm excitations, while for the nanodiamond–Au structure some characteristic SERS effects are observed at 785-nm excitation. The mechanisms of enhancement are discussed considering the nanodiamond–metal interaction and laser acceleration effect on nanodiamond.     

Surface-Enhanced Raman Scattering (SERS) on 1D Nano-gratings

Surface-enhanced Raman scattering (SERS) enhancement factor (EF) is among the major applications of surface plasmon polaritons (SPP’s). In this work, the SERS EF of 1D rectangular and sinusoidal-shaped gold (Au) grating structures has been designed and optimized on Au film using COMSOL multiphysics (5.3a) RF module taking glass as substrate. The 1D grating models are simulated by variation in slit width ranging 200–600 nm while other parameters including periodicity of 700 nm and Au film thickness of 50 nm remained fixed. In order to study the several phenomena including enhanced optical transmission and SERS EF, the transmission and electric field spectra have been obtained from both types of grating structures. In agreement with fundamental plasmonic mode, the slit width of two-thirds of the periodicity found to be optimum for SERS EF. Remarkable value of SERS EF is obtained in the case of a sinusoidal Au grating device (6.4 × 10⁹) which is calculated to be five times that of the rectangular grating (1.2 × 10⁹). These devices are also the fingerprints of molecules, hence find applications in biosensing, pollution control, and chemical and food industry.

     

A sensitive SERS quantitative analysis method for Ni2+ by the dimethylglyoxime reaction regulating a graphene oxide nanoribbon catalytic gold nanoreaction

The nanogold reaction between HAuCl₄ and trisodium citrate (TCA) proceeded very slowly at 60°C in a water bath. The as‐prepared graphene oxide nanoribbons (GONRs) exhibited strong catalysis during the reaction to form gold nanoparticles (Au NPs) and appeared as a strong surface‐enhanced Raman scattering (SERS) peak at 1616 cm^?1 in the presence of the molecular probe Victoria blue 4R (VB4r). With increase in GONR concentration, the SERS peak increased due to increased formation of Au NPs. Upon addition of dimethylglyoxime (DMG) ligand, which was adsorbed onto the GONR surface to inhibit GONR catalysis, the SERS peak decreased. When Ni²⁺ was added, a coordination reaction between DMG and Ni²⁺ took place to form stable complexes of [Ni (DMG)₂]²⁺ and the release of free GONR catalyst that resulted in the SERS peak increasing linearly. A SERS quantitative analysis method for Ni²⁺ was therefore established, with a linear range of 0.07–2.8 μM, and a detection limit of 0.036 μM Ni²⁺.     

DNA Detection Based on Localized Surface Plasmon Resonance Spectroscopy of Ag@Au Biocomposite Nanoparticles

Noble metal nanoparticles (NPs) have attracted much attention due to their unique physical and chemical properties such as tunable surface plasmonics, high-efficiency electrochemical sensing, and enhanced fluorescence. We produced two biosensor chips consisting of Ag@Au bimetallic nanoparticles (BNPs) on a carbon thin film by simple RF-sputtering and RF-plasma-enhanced chemical vapor co-deposition. We deposited Au NPs with average size of 4 nm (Au₁ NPs) or 11 nm (Au₂ NPs) on a sensor chip consisting of Ag NPs with mean size of 15 nm, and we investigated the effect of shell size (Au NPs) on the chemical activities of the resulting Ag@Au₁ BNPs and Ag@Au₂ BNPs. We estimated the average size and morphology of Ag@Au BNPs by scanning electron microscopy (SEM) and atomic force microscopy (AFM) images. X-ray diffraction (XRD) patterns revealed that Ag NPs and Au NPs had face-centered cubic (FCC) structure. We studied aging of the biosensor chips consisting of Ag@Au BNPs by localized surface plasmon resonance (LSPR) spectroscopy for up to 3 months. UV–visible aging of the prepared samples indicated that Ag@Au₁ BNPs, which corresponded to Ag NPs covered with smaller Au NPs, were more chemically active than Ag@Au₂ BNPs. Furthermore, we evaluated changes in the LSPR absorption peaks of Ag@Au₁ BNPs and bare Ag NPs in the presence of a DNA primer decamer at fM concentrations, to find that Ag@Au₁ BNPs were more sensitive biosensor chips within a short response time as compared to bare Ag NPs.

     

Boosting bacteria differentiation efficiency with multidimensional surface-enhanced Raman scattering: the example of Bacillus cereus

Surface-enhanced Raman scattering (SERS) is a powerful tool for constructing biomolecular fingerprints, which play a vital role in differentiation of bacteria. Due to the rather subtle differences in the SERS spectra among different bacteria, artificial intelligence is usually adopted and enormous amounts of spectral data are required to improve the differentiation efficiency. However, in many cases, large volume data acquisition on bacteria is not only technical difficult but labour intensive. It is known that surface modification of SERS nanomaterials can bring additional dimensionality (difference) of the SERS fingerprints. Here in this work, we show that the concept could be used to improve the bacteria differentiation efficiency. Ag NPs were modified with 11-mercaptoundecanoic acid, 11-mercapto-1-undecanol, and 1-dodecanethiol to provide additional dimensionality. The modified NPs then were mixed with cell lysate from different strains of Bacillus cereus (B. cereus). Even by applying a simple PCA process to the resulting SERS spectra data, all the three modified Ag NPs showed superior differentiation results compared with bare Ag NPs, which could only separate Staphylococcus aureus (S. aureus) and B. cereus. It is believed that the multidimensional SERS could find great potential in bacteria differentiation.     

Bare laser‐synthesized Au‐based nanoparticles as nondisturbing surface‐enhanced Raman scattering probes for bacteria identification

The ability of noble metal‐based nanoparticles (NPs) (Au, Ag) to drastically enhance Raman scattering from molecules placed near metal surface, termed as surface‐enhanced Raman scattering (SERS), is widely used for identification of trace amounts of biological materials in biomedical, food safety and security applications. However, conventional NPs synthesized by colloidal chemistry are typically contaminated by nonbiocompatible by‐products (surfactants, anions), which can have negative impacts on many live objects under examination (cells, bacteria) and thus decrease the precision of bioidentification. In this article, we explore novel ultrapure laser‐synthesized Au‐based nanomaterials, including Au NPs and AuSi hybrid nanostructures, as mobile SERS probes in tasks of bacteria detection. We show that these Au‐based nanomaterials can efficiently enhance Raman signals from model R6G molecules, while the enhancement factor depends on the content of Au in NP composition. Profiting from the observed enhancement and purity of laser‐synthesized nanomaterials, we demonstrate successful identification of 2 types of bacteria (Listeria innocua and Escherichia coli). The obtained results promise less disturbing studies of biological systems based on good biocompatibility of contamination‐free laser‐synthesized nanomaterials.

     

Synthesis of Peptide Mediated Au Core–Ag Shell Nanoparticles as Surface-Enhanced Raman Scattering Labels

As the fundamental understanding of metal–light interactions gains solid grounds, further research has been devoted to construct novel structures that take full advantage of such unique interactions, which is called plasmonics. In this report, the preparation of Au–Ag core–shell structures obtained by coating the Au surface with peptide and Raman reporter molecule and depositing an Ag layer on it is reported. The prepared Au–Ag NPs are tested for their surface-enhanced Raman scattering (SERS) performance. The negatively charged peptides with three different lengths, which are 3 (P1), 15 (P2), and 21 (P3) amino acid long, were chemically attached to 13 nm AuNPs along with Raman reporter molecule, carboxytetramethylrhodamine, and these modified AuNPs were coated with three different shell thickness of Ag metal. The prepared Au–Ag NPs were tested for their SERS performance and found that the Au–Ag NPs prepared with P2 and thickest shell performs best as SERS label.     

Morphology Dependence on Surface-Enhanced Raman Scattering Using Gold Nanorod Arrays Consisting of Agglomerated Nanoparticles

Plasmonics - Highly ordered arrays of vertically aligned Au nanorod arrays consisting of agglomerated nanoparticles are fabricated by porous anodic aluminum oxide (AAO) template-assisted...     

Blue-Shifted SPR of Au Nanoparticles with Ordering of Carbon by Dense Ionization and Thermal Treatment

Thin films of carbon-containing Au nanoparticles (NPs), prepared by the co-sputtering using a neutral Ar atom beam, were irradiated by 120 MeV Ag ions and also annealed, separately, at increasing temperatures in inert atmosphere. The surface plasmon resonance (SPR) band of the nanocomposite film was observed to be blue shifted (～50 nm) in both cases, with increasing fluence and temperature. The structural changes of Au NPs embedded in amorphous carbon matrix were investigated using X-ray diffraction and transmission electron microscopy. A growth of Au NPs was observed with increasing fluence and also with increasing temperature. A percolation of Au NPs was observed at 500 °C. A growth of Au NPs with ion irradiation is explained in the framework of a thermal spike model. Raman spectroscopy revealed the ordering of a-C thin films with increasing fluence and temperature, which is ascribed to a change of refractive index and the blue shift of the SPR band.     

Graphene Multilayer Supported Gold Nanoparticles for Efficient Electrocatalysts Toward Methanol Oxidation

This study reports a simple method of integrating electroactive gold nanoparticles (Au NPs) with graphene oxide (GO) nanosheet support by layer‐by‐layer (LbL) assembly for the creation of 3‐dimensional electrocatalytic thin films that are active toward methanol oxidation. This approach involves the alternating assembly of two oppositely charged suspensions of Au NPs with GO nanosheets based on electrostatic interactions. The GO nanosheets not only serve as structural components of the multilayer thin film, but also potentially improve the utilization and dispersion of Au NPs by taking advantages of the high catalytic surface area and the electronic conduction of graphene nanosheets. Furthermore, it is found that the electrocatalytic activity of the multilayer thin films of Au NPs with graphene nanosheet is highly tunable with respect to the number of bilayers and thermal treatment, benefiting from the advantageous features of LbL assembly. Because of the highly versatile and tunable properties of LbL assembled thin films coupled with electrocatalytic NPs, we anticipate that the general concept presented here will offer new types of electroactive catalysts for direct methanol fuel cells.     

Silver Nanoparticles and Nanorings for Surface-Enhanced Raman Scattering

Silver (Ag) nanoparticles (NPs) and Ag nanorings (NRs) have been fabricated. Due to the inherent features of Ag NPs and Ag NRs, strong electromagnetic (EM) near-field distributions were expected, and hence surface-enhanced Raman scattering (SERS) activity was demonstrated. Size and interparticle gaps distribution of Ag NPs were estimated to be 48.14?±?10.14 nm and 14.11?±?5.24 nm respectively along with estimated coverage density of?~?4?×?10¹⁰ cm^?2. On the other hand, Ag NRs were found to consist of Ag clusters and of various shapes and sizes, instead of a perfect ring structure. High-resolution FESEM revealed that the individual constituent clusters were different from each other, particularly in terms of size and shape in addition to the cases how such clusters were connected to form the edge of the NR. However, the coverage density of Ag NRs was estimated to be?~?5.6?×?10⁶ cm^?2. Based on the scenarios, it was speculated that the local EM near-field distribution would excel and thus led to enhanced SERS signals. SERS enhancement of R6G was estimated as high as 2.18?×?10⁴ and 2.78?×?10⁴ at 610 cm^?1 (C???C ring bending mode in phenyl rings) for Ag NPs and Ag NRs respectively. FDTD analysis was carried out to elucidate the EM near-field distributions.

Graphical abstract

Ag NPs and Ag NRs from an ultrathin layer of Ag on ZnO/Glass (middle pane) confirming high EF of R6G adsorbed on Ag NRs (right pane) and Ag NPs (left pane) supported by corresponding EM near-field distributions.

     

In vitro and in vivo anticandidal efficacy of green synthesized gold nanoparticles using Spirulina maxima polysaccharide

This study, for the first time, demonstrated an unprecedented approach for the green synthesis of gold (Au) nanoparticles (NPs) using the polysaccharide of Spirulina maxima as a reducing agent. Time-kill kinetic analysis was used to evaluate the antifungal activity of the green synthesized Au NPs against the pathogenic Candida albicans (C. albicans). The minimum inhibitory concentration (MIC) and minimum fungicidal concentration (MFC) were found to be 32 μg/mL and 64 μg/mL, respectively. Ultra-structural analysis indicated prominent damage on cell wall of the C. albicans after Au NPs treatment, and suggested that the treatment could increase the membrane permeability and disintegration of cells leading to cellular death. The results of propidium iodide (PI) uptake assay showed the higher level of cell death in Au NPs treated C. albicans cells, further confirming the loss of plasma membrane integrity. Cytotoxicity analysis of Au NPs on HEK293T and A549 cells showed no cytotoxic effect up to 64 μg/mL of Au NPs concentration, indicating the potential use in in vivo studies. Also, the recovery of C. albicans infected zebrafish after Au NPs therapy suggest green synthesized Au NPs from S. maxima polysaccharide as a prospective anticandidal agent.     

A Real-Time Clinical Endoscopic System for Intraluminal,Multiplexed Imaging of Surface-Enhanced Raman Scattering Nanoparticles

The detection of biomarker-targeting surface-enhanced Raman scattering (SERS) nanoparticles (NPs) in the human gastrointestinal tract has the potential to improve early cancer detection; however, a clinically relevant device with rapid Raman-imaging capability has not been described. Here we report the design and in vivo demonstration of a miniature, non-contact, opto-electro-mechanical Raman device as an accessory to clinical endoscopes that can provide multiplexed molecular data via a panel of SERS NPs. This device enables rapid circumferential scanning of topologically complex luminal surfaces of hollow organs (e.g., colon and esophagus) and produces quantitative images of the relative concentrations of SERS NPs that are present. Human and swine studies have demonstrated the speed and simplicity of this technique. This approach also offers unparalleled multiplexing capabilities by simultaneously detecting the unique spectral fingerprints of multiple SERS NPs. Therefore, this new screening strategy has the potential to improve diagnosis and to guide therapy by enabling sensitive quantitative molecular detection of small and otherwise hard-to-detect lesions in the context of white-light endoscopy.     

Differently Environment Stable Bio-Silver Nanoparticles: Study on Their Optical Enhancing and Antibacterial Properties

Generally, limited research is extended in studying stability and applicational properties of silver nanoparticles (Ag NPs) synthesized by adopting ‘green chemistry’ protocol. In this work, we report on the synthesis of stable Ag NPs using plant-derived materials such as leaf extract of Neem (Azadirachta indica) and biopolymer pectin from apple peel. In addition, the applicational properties of Ag NPs such as surface-enhanced Raman scattering (SERS) and antibacterial efficiencies were also investigated. As-synthesized nanoparticles (NPs) were characterized using various instrumentation techniques. Both the plant materials (leaf extract and biopolymer) favored the synthesis of well-defined NPs capped with biomaterials. The NPs were spherical in shape with an average particle size between 14-27 nm. These bio-NPs exhibited colloidal stability in most of the suspended solutions such as water, electrolyte solutions (NaCl; NaNO₃), biological solution (bovine serum albumin), and in different pH solutions (pH 7; 9) for a reasonable time period of 120 hrs. Both the bio-NPs were observed to be SERS active through displaying intrinsic SERS signals of the Raman probe molecule (Nile blue A). The NPs were effective against the Escherichia coli bacterium when tested in nutrient broth and agar medium. Scanning and high-resolution transmission electron microscopy (SEM and HRTEM) images confirmed cellular membrane damage of nanoparticle treated E. coli cells. These environmental friendly template Ag NPs can be used as an antimicrobial agent and also for SERS based analytical applications.     

Monte Carlo simulation of gold nanoparticles for X-ray enhancement application

BackgroundGold nanoparticles (Au NPs) are regarded as potential agents that enhance the radiosensitivity of tumor cells for theranostic applications. To elucidate the biological mechanisms of radiation dose enhancement effects of Au NPs as well as DNA damage attributable to the inclusion of Au NPs, Monte Carlo (MC) simulations have been deployed in a number of studies.Scope of ReviewThis review paper concisely collates and reviews the information reported in the simulation research in terms of MC simulation of radiosensitization and dose enhancement effects caused by the inclusion of Au NPs in tumor cells, simulation mechanisms, benefits and limitations.Major conclusionsIn this review, we first explore the recent advances in MC simulation on Au NPs radiosensitization. The MC methods, physical dose enhancement and enhanced chemical and biological effects is discussed, followed by some results regarding the prediction of dose enhancement. We then review Multi-scale MC simulations of Au NP-induced DNA damages for X-ray irradiation. Moreover, we explain and look at Multi-scale MC simulations of Au NP-induced DNA damages for X-ray irradiation.General significanceUsing advanced chemical module-implemented MC simulations, there is a need to assess the radiation-induced chemical radicals that contribute to the dose-enhancing and biological effects of multiple Au NPs.     

对硝基苯硫酚分子内嵌的星形表面增强拉曼散射金 "套娃 "纳米颗粒用于肿瘤拉曼影像的初步研究

目的:制备对硝基苯硫酚(4-Nitrobenzenethiol,4-NBT)分子内嵌的星形表面增强拉曼散射(Surface enhanced Raman Scattering,SERS)金"套娃"纳米颗粒,测定其拉曼增强效果和应用于细胞以及活体肿瘤拉曼影像的可行性。方法:以种子介导法先后制备金纳米星及星形SERS金"套娃"纳米颗粒,采用透射电镜观察其形貌,激光粒度分析仪测定其粒径及Zeta电位,拉曼光谱仪测定其拉曼光谱,考察其对A549细胞的拉曼成像效果,建立A549皮下瘤模型,考察其对活体皮下瘤的成像效果。结果:制备并优化的金纳米星粒径较小,为60.5 nm,其针尖密度较高,以此为核心制备的星形SERS金"套娃"纳米颗粒形态规整,粒径约为66.7nm,Zeta电位约为-16.6 m V,拉曼增强效果提升至其前驱体金纳米星的5.3倍,能够实现对A549细胞及A549皮下瘤的拉曼成像。结论:所制备的星形SERS金"套娃"纳米颗粒形态规整均一,拉曼增强效果较好,能实现对细胞及活体肿瘤的拉曼影像。