Biochemical characterization of cloned Aspergillus fumigatus phytase (phyA)

The gene for Aspergillus fumigatus phytase (phyA) was cloned and expressed in Pichia pastoris. The enzyme expressed was purified to near homogeneity using sequential ion-exchange chromatography and was characterized biochemically. Although A. fumigatus phytase shows 66.2% sequence homology with A. ficuum phytase, the most widely studied enzyme, the cloned phytase showed identical molecular weight and temperature optima profile to the benchmark phytase. The pH profile of activity and kinetic parameters, however, differed from A. ficuum phytase. The cloned enzyme contains the septapeptide RHGARYP motif, which is also identical to the active site motif of A. ficuum phytase. Chemical probing of the active site Arg residues using both cyclohexanedione and phenylglyoxal resulted in the inactivation of phytase. The cloned A. fumigatus phytase, however, was more resistant to phenylglyoxal-induced inactivation. Both cloned A. fumigatus and A. ficuum phytases were identically affected by cyclohexanedione. Both the thermal characterization data and kinetic parameters of cloned and expressed A. fumigatus phytase indicate that this biocatalyst is not superior to the benchmark enzyme. The sequence difference between A. fumigatus and A. ficuum phytase may explain why the former enzyme catalyzes poorly compared to the benchmark enzyme. In addition, differential sensitivity toward the Arg modifier, phenylglyoxal, indicates a different chemical environment at the active site for each of the phytases.     

Adopting selected hydrogen bonding and ionic interactions from Aspergillus fumigatus phytase structure improves the thermostability of Aspergillus niger PhyA phytase

Although it has been widely used as a feed supplement to reduce manure phosphorus pollution of swine and poultry, Aspergillus niger PhyA phytase is unable to withstand heat inactivation during feed pelleting. Crystal structure comparisons with its close homolog, the thermostable Aspergillus fumigatus phytase (Afp), suggest associations of thermostability with several key residues (E35, S42, R168, and R248) that form a hydrogen bond network in the E35-to-S42 region and ionic interactions between R168 and D161 and between R248 and D244. In this study, loss-of-function mutations (E35A, R168A, and R248A) were introduced singularly or in combination into seven mutants of Afp. All seven mutants displayed decreases in thermostability, with the highest loss (25% [P<0.05]) in the triple mutant (E35A R168A R248A). Subsequently, a set of corresponding substitutions were introduced into nine mutants of PhyA to strengthen the hydrogen bonding and ionic interactions. While four mutants showed improved thermostability, the best response came from the quadruple mutant (A58E P65S Q191R T271R), which retained 20% greater (P<0.05) activity after being heated at 80 degrees C for 10 min and had a 7 degrees C higher melting temperature than that of wild-type PhyA. This study demonstrates the functional importance of the hydrogen bond network and ionic interaction in supporting the high thermostability of Afp and the feasibility of adopting these structural units to improve the thermostability of a homologous PhyA phytase.     

Crystal structure of a heat-resilient phytase from Aspergillus fumigatus, carrying a phosphorylated histidine

In order to understand the structural basis for the high thermostability of phytase from Aspergillus fumigatus, its crystal structure was determined at 1.5 A resolution. The overall fold resembles the structure of other phytase enzymes. Aspergillus niger phytase shares 66% sequence identity, however, it is much less heat-resistant. A superimposition of these two structures reveals some significant differences. In particular, substitutions with polar residues appear to remove repulsive ion pair interactions and instead form hydrogen bond interactions, which stabilize the enzyme; the formation of a C-terminal helical capping, induced by arginine residue substitutions also appears to be critical for the enzyme's ability to refold to its active form after denaturation at high temperature. The heat-resilient property of A.fumigatus phytase could be due to the improved stability of regions that are critical for the refolding of the protein; and a heat-resistant A.niger phytase may be achieved by mutating certain critical residues with the equivalent residues in A.fumigatus phytase. Six predicted N-glycosylation sites were observed to be glycosylated from the experimental electron density. Furthermore, the enzyme's catalytic residue His59 was found to be partly phosphorylated and thus showed a reaction intermediate, providing structural insight, which may help understand the catalytic mechanism of the acid phosphatase family. The trap of this catalytic intermediate confirms the two-step catalytic mechanism of the acid histidine phosphatase family.     

Gene cloning, purification, and characterization of a heat-stable phytase from the fungus Aspergillus fumigatus.

The finding of heat-stable enzymes or the engineering of moderately thermostable enzymes into more stable ones by random or site-directed mutagenesis has become a main priority of modern biotechnology. We report here for the first time a heat-stable phytase able to withstand temperatures up to 100 degrees C over a period of 20 min, with a loss of only 10% of the initial enzymatic activity. The gene (phyA) encoding this heat-stable enzyme has been cloned from Aspergillus fumigatus and overexpressed in Aspergillus niger. The enzyme showed high activity with 4-nitrophenyl phosphate at a pH range of 3 to 5 and with phytic acid at a pH range of 2.5 to 7.5.     

High-resolution cell surface dynamics of germinating Aspergillus fumigatus conidia

We used real-time atomic force microscopy with a temperature-controlled stage (37°C) to probe the structural and physicochemical dynamics of single Aspergillus fumigatus conidia during germination. Nanoscale topographic images of dormant spores revealed the presence of a layer of rodlets made of hydrophobins, in agreement with earlier electron microscopy observations. Within the 3-h germination period, progressive disruption of the rodlet layer was observed, revealing hydrophilic inner cell wall structures. Using adhesion force mapping with hydrophobic tips, these ultrastructural changes were shown to correlate with major differences in cell surface hydrophobicity. That is, the rodlet surface was uniformly hydrophobic due to the presence of hydrophobins, whereas the cell wall material appearing upon germination was purely hydrophilic. This study illustrates the potential of real-time atomic force microscopy imaging and force spectroscopy for tracking cell-surface dynamics.     

Expression of the Aspergillus fumigatus phytase gene in Pichia pastoris and characterization of the recombinant enzyme

Aspergillus fumigatus phytase is a heat-stable enzyme of great potential. Our objective was to determine if a high level of functional expression of the A. fumigatus phytase gene could be produced in Pichia pastoris and how the recombinant phytase reacted to different substrates, heating conditions, and proteases. A 1.4-kb DNA fragment containing the coding region of the gene was inserted into the expression vector pPICZalphaA and expressed in P. pastoris as an active, extracellular phytase (r-Afp). The yield was 729 mg of purified protein per liter of culture, with a specific activity of 43 units/mg of protein. The enzyme r-Afp shared similar pH and temperature optima, molecular size, glycosylation extent, and specificity for p-nitrophenyl phosphate and sodium phytate to those of the same enzyme expressed in A. niger. Given 20 min of exposure to 65 to 90 degrees C, the enzyme retained 20 to 39% higher residual activity in 10 and 200 mM sodium acetate than that in sodium citrate. The enzyme seemed to be resistant to pepsin digestion, but was degraded by high levels of trypsin. In conclusion, P. pastoris is a potential host to express high levels of A. fumigatus phytase and the thermostability of the recombinant enzyme is modulated by the specificity of buffer used in the heat treatment.     

中性植酸酶菌株的筛选及性质

从天然土壤中筛选出产胞外中性植酸酶的细菌20余株,通过钼蓝法对菌种进行复筛,确定phy7为研究菌。通过16SrDNA测序分析方法鉴定该菌株属于绿脓假单胞菌属。结果表明：该菌株分泌中性植酸酶,其最适反应pH为7．0、最适反应温度为40℃;在37℃时以植酸钠为底物的Km为0．26mmol／L,max为0．0506nmol／min。金属离子zn2＋、Al3＋、Cu2＋和Mn2＋等对该酶有抑制作用,而Fe2＋等则有一定的激活作用。     

THTA, a thermotolerance gene of Aspergillus fumigatus

Aspergillus fumigatus grows optimally from 37 to 42 degrees C but can grow at temperatures up to 55 degrees C. To study the genetic basis of thermotolerance and its role in virulence of A. fumigatus, temperature sensitive mutants were isolated. One of the mutants that grew at 42 degrees C but not at 48 degrees C was complemented and the gene, THTA, was identified. Deletion of THTA showed the same temperature sensitivity as the original mutant. THTA encodes a putative protein of 141 kDa with unknown function and the HA-tagged ThtAp accumulated to similar levels in cultures grown at either 37 or 48 degrees C. Southern blot analysis and database searches revealed the presence of THTA-related sequences in several other ascomycetous fungi. No difference in virulence was observed between the deltathtA and wild-type strains. Thus, THTA is essential for growth of A. fumigatus at high temperatures but does not contribute to the pathogenicity of the species.     

Crystallographic snapshots of a replicative DNA polymerase encountering an abasic site

Abasic sites are common DNA lesions, which are strong blocks to replicative polymerases and are potentially mutagenic when bypassed. We report here the 2.8 A structure of the bacteriophage RB69 replicative DNA polymerase attempting to process an abasic site analog. Four different complexes were captured in the crystal asymmetric unit: two have DNA in the polymerase active site whereas the other two molecules are in the exonuclease mode. When compared to complexes with undamaged DNA, the DNA surrounding the abasic site reveals distinct changes suggesting why the lesion is so poorly bypassed: the DNA in the polymerase active site has not translocated and is therefore stalled, precluding extension. All four molecules exhibit conformations that differ from the previously published structures. The polymerase incorporates dAMP across the lesion under crystallization conditions, indicating that the different conformations observed in the crystal may be part of the active site switching reaction pathway.     

Crystallographic snapshots of Tom20-mitochondrial presequence interactions with disulfide-stabilized peptides

Most mitochondrial proteins are synthesized in the cytosol and imported into mitochondria. The Tom20 protein, residing on the mitochondrial surface, recognizes the N-terminal presequences of precursor proteins. We previously determined the crystal structures of the Tom20-presequence complex. The successful crystallization involved tethering the presequence to Tom20 through an intermolecular disulfide bond with an optimized linker. In this work, we assessed the tethering method. The intermolecular disulfide bond was cleaved in crystal with a reducing agent. The pose (i.e., conformation and position) of the presequence was identical to the previously determined pose. In another experiment, a longer linker than the optimized length was used for the tethering. The perturbation of the tether changed the pose slightly, but the interaction mode was preserved. These results argue against the forced interaction of the presequence by its covalent attachment to Tom20. Second, as an alternative method referred to as "molecular stiffening", we introduced a disulfide bond within the presequence peptide to restrict the freedom of the peptide in the unbound states. One presequence analogue exhibited over 100-fold higher affinity than its linear counterpart and generated cocrystals with Tom20. One of the two crystallographic snapshots revealed a known pose previously determined by the tethering method, and the other snapshot depicted a new pose. These results confirmed and extended the dynamic, multiple bound state model of the Tom20-presequence interactions and also demonstrated the validity of the molecular tethering and stiffening techniques in studies of transient protein-peptide interactions.     

Conidial hydrophobins of Aspergillus fumigatus

The surface of Aspergillus fumigatus conidia, the first structure recognized by the host immune system, is covered by rodlets. We report that this outer cell wall layer contains two hydrophobins, RodAp and RodBp, which are found as highly insoluble complexes. The RODA gene was previously characterized, and DeltarodA conidia do not display a rodlet layer (N. Thau, M. Monod, B. Crestani, C. Rolland, G. Tronchin, J. P. Latgé, and S. Paris, Infect. Immun. 62:4380-4388, 1994). The RODB gene was cloned and disrupted. RodBp was highly homologous to RodAp and different from DewAp of A. nidulans. DeltarodB conidia had a rodlet layer similar to that of the wild-type conidia. Therefore, unlike RodAp, RodBp is not required for rodlet formation. The surface of DeltarodA conidia is granular; in contrast, an amorphous layer is present at the surface of the conidia of the DeltarodA DeltarodB double mutant. These data show that RodBp plays a role in the structure of the conidial cell wall. Moreover, rodletless mutants are more sensitive to killing by alveolar macrophages, suggesting that RodAp or the rodlet structure is involved in the resistance to host cells.     

The Volatome of Aspergillus fumigatus

Early detection of invasive aspergillosis is absolutely required for efficient therapy of this fungal infection. The identification of fungal volatiles in patient breath can be an alternative for the detection of Aspergillus fumigatus that still remains problematic. In this work, we investigated the production of volatile organic compounds (VOCs) by A. fumigatusin vitro, and we show that volatile production depends on the nutritional environment. A. fumigatus produces a multiplicity of VOCs, predominantly terpenes and related compounds. The production of sesquiterpenoid compounds was found to be strongly induced by increased iron concentrations and certain drugs, i.e., pravastatin. Terpenes that were always detectable in large amounts were α-pinene, camphene, and limonene, as well as sesquiterpenes, identified as α-bergamotene and β-trans-bergamotene. Other substance classes that were found to be present in the volatome, such as 1-octen-3-ol, 3-octanone, and pyrazines, were found only under specific growth conditions. Drugs that interfere with the terpene biosynthesis pathway influenced the composition of the fungal volatome, and most notably, a block of sesquiterpene biosynthesis by the bisphosphonate alendronate fundamentally changed the VOC composition. Using deletion mutants, we also show that a terpene cyclase and a putative kaurene synthase are essential for the synthesis of volatile terpenes by A. fumigatus. The present analysis of in vitro volatile production by A. fumigatus suggests that VOCs may be used in the diagnosis of infections caused by this fungus.     

Conidial Hydrophobins of Aspergillus fumigatus

The surface of Aspergillus fumigatus conidia, the first structure recognized by the host immune system, is covered by rodlets. We report that this outer cell wall layer contains two hydrophobins, RodAp and RodBp, which are found as highly insoluble complexes. The RODA gene was previously characterized, and ΔrodA conidia do not display a rodlet layer (N. Thau, M. Monod, B. Crestani, C. Rolland, G. Tronchin, J. P. Latgé, and S. Paris, Infect. Immun. 62:4380-4388, 1994). The RODB gene was cloned and disrupted. RodBp was highly homologous to RodAp and different from DewAp of A. nidulans. ΔrodB conidia had a rodlet layer similar to that of the wild-type conidia. Therefore, unlike RodAp, RodBp is not required for rodlet formation. The surface of ΔrodA conidia is granular; in contrast, an amorphous layer is present at the surface of the conidia of the ΔrodA ΔrodB double mutant. These data show that RodBp plays a role in the structure of the conidial cell wall. Moreover, rodletless mutants are more sensitive to killing by alveolar macrophages, suggesting that RodAp or the rodlet structure is involved in the resistance to host cells.     

Insertional mutagenesis of Aspergillus fumigatus

We have investigated transformation with heterologous DNA as a method for insertional mutagenesis of Aspergillus fumigatus. Two methods, polyethylene glycol-mediated transformation of protoplasts and electroporation of germinating spores, were used to establish conditions leading to single-copy integration of transforming DNA at different genomic sites. We have assessed the effect of restriction enzyme-mediated integration (REMI) for both methods. Non-REMI protoplast transformation led to integration of multiple copies of transforming DNA in the majority of transformants. Results of REMI with protoplast transformation varied depending on the enzyme used. Low concentrations of several restriction enzymes stimulated transformation, but of ten enzymes investigated only REMI with XhoI and KpnI resulted in single-copy integration of transforming DNA for the majority of transformants. For protoplast transformation with XhoI- or KpnI-based REMI, 50% and 76% of insertions, respectively, were due to integrations at a genomic enzyme site corresponding to the enzyme used for REMI. Electroporation of spores without addition of restriction enzyme resulted in a high transformation efficiency, with up to 67% of transformants containing a single copy of transforming DNA. In contrast to protoplast transformation, electroporation of spores in the presence of a restriction enzyme did not improve transformation efficiency or lead to insertion at genomic restriction sites. Southern analysis indicated that for both protoplast transformation with REMI using KpnI or XhoI and for electroporation of spores without addition of restriction enzymes, transforming DNA inserted at different genomic sites in a high proportion of transformants.     

Galactosaminogalactan, a new immunosuppressive polysaccharide of Aspergillus fumigatus

A new polysaccharide secreted by the human opportunistic fungal pathogen Aspergillus fumigatus has been characterized. Carbohydrate analysis using specific chemical degradations, mass spectrometry, 1H and 13C nuclear magnetic resonance showed that this polysaccharide is a linear heterogeneous galactosaminogalactan composed of α1-4 linked galactose and α1-4 linked N-acetylgalactosamine residues where both monosacharides are randomly distributed and where the percentage of galactose per chain varied from 15 to 60%. This polysaccharide is antigenic and is recognized by a majority of the human population irrespectively of the occurrence of an Aspergillus infection. GalNAc oligosaccharides are an essential epitope of the galactosaminogalactan that explains the universal antibody reaction due to cross reactivity with other antigenic molecules containing GalNAc stretches such as the N-glycans of Campylobacter jejuni. The galactosaminogalactan has no protective effect during Aspergillus infections. Most importantly, the polysaccharide promotes fungal development in immunocompetent mice due to its immunosuppressive activity associated with disminished neutrophil infiltrates.     

烟曲霉基因组与致病机制

烟曲霉(Aspergillus fumigatus)是环境中普遍存在的丝状腐生真菌,也是重要的机会致病菌。随着免疫受损人群的增多,由烟曲霉引起的系统性感染发病率不断升高,已成为重症免疫受损患者死亡的主要原因之一。文章结合烟曲霉全基因组序列信息对烟曲霉感染过程、致病机制等做一概述。     

Histopathology of experimental Aspergillus fumigatus keratitis

Histopathological studies in rabbit's eyes, 7 and 14 days after intracorneal inoculation with 1×10⁵ Aspergillus fumigatus conidia have been performed.Similar lesions were found in both periods with fungal hyphae in the anterior third of corneal stroma, round cell infiltration from the sclero-corneal edge and in the anterior chamber and, neovascularization.No lesions were found in the Descemet's membrane.Gomori silver-methenamine stain with hematoxiline-eosine counter-stain was found to be the most reliable stain to detect fungal presence in corneal stroma, and Masson's trichromic stain in the study of pathological changes in ocular elements.     

Glucan synthase complex of Aspergillus fumigatus

The glucan synthase complex of the human pathogenic mold Aspergillus fumigatus has been investigated. The genes encoding the putative catalytic subunit Fks1p and four Rho proteins of A. fumigatus were cloned and sequenced. Sequence analysis showed that AfFks1p was a transmembrane protein very similar to other Fksp proteins in yeasts and in Aspergillus nidulans. Heterologous expression of the conserved internal hydrophilic domain of AfFks1p was achieved in Escherichia coli. Anti-Fks1p antibodies labeled the apex of the germ tube, as did aniline blue fluorochrome, which was specific for beta(1-3) glucans, showing that AfFks1p colocalized with the newly synthesized beta(1-3) glucans. AfRHO1, the most homologous gene to RHO1 of Saccharomyces cerevisiae, was studied for the first time in a filamentous fungus. AfRho proteins have GTP binding and hydrolysis consensus sequences identical to those of yeast Rho proteins and have a slightly modified geranylation site in AfRho1p and AfRho3p. Purification of the glucan synthase complex by product entrapment led to the enrichment of four proteins: Fks1p, Rho1p, a 100-kDa protein homologous to a membrane H(+)-ATPase, and a 160-kDa protein which was labeled by an anti-beta(1-3) glucan antibody and was homologous to ABC bacterial beta(1-2) glucan transporters.