Increased thermostability of microbial transglutaminase by combination of several hot spots evolved by random and saturation mutagenesis

The thermostability of microbial transglutaminase (MTG) of Streptomyces mobaraensis was further improved by saturation mutagenesis and DNA-shuffling. High-throughput screening was used to identify clones with increased thermostability at 55°C. Saturation mutagenesis was performed at seven "hot spots", previously evolved by random mutagenesis. Mutations at four positions (2, 23, 269, and 294) led to higher thermostability. The variants with single amino acid exchanges comprising the highest thermostabilities were combined by DNA-shuffling. A library of 1,500 clones was screened and variants showing the highest ratio of activities after incubation for 30 min at 55°C relative to a control at 37°C were selected. 116 mutants of this library showed an increased thermostability and 2 clones per deep well plate were sequenced (35 clones). 13 clones showed only the desired sites without additional point mutations and eight variants were purified and characterized. The most thermostable mutant (triple mutant S23V-Y24N-K294L) exhibited a 12-fold higher half-life at 60°C and a 10-fold higher half-life at 50°C compared to the unmodified recombinant wild-type enzyme. From the characterization of different triple mutants differing only in one amino acid residue, it can be concluded that position 294 is especially important for thermostabilization. The simultaneous exchange of amino acids at sites 23, 24, 269 and 289 resulted in a MTG-variant with nearly twofold higher specific activity and a temperature optimum of 55°C. A triple mutant with amino acid substitutions at sites 2, 289 and 294 exhibits a temperature optimum of 60°C, which is 10°C higher than that of the wild-type enzyme.     

Stabilization of E. coli Ribonuclease HI by the 'stability profile of mutant protein' (SPMP)-inspired random and non-random mutagenesis

The change in the structural stability of Escherichia coli ribonuclease HI (RNase HI) due to single amino acid substitutions has been estimated computationally by the stability profile of mutant protein (SPMP) [Ota, M., Kanaya, S. Nishikawa, K., 1995. Desk-top analysis of the structural stability of various point mutations introduced into ribonuclease H. J. Mol. Biol. 248, 733-738]. As well, an effective strategy using random mutagenesis and genetic selection has been developed to obtain E. coli RNase HI mutants with enhanced thermostability [Haruki, M., Noguchi, E., Akasako, A., Oobatake, M., Itaya, M., Kanaya, S., 1994. A novel strategy for stabilization of Escherichia coli ribonuclease HI involving a screen for an intragenic suppressor of carboxyl-terminal deletions. J. Biol. Chem. 269, 26904-26911]. In this study, both methods were combined: random mutations were individually introduced to Lys99-Val101 on the N-terminus of the alpha-helix IV and the preceding beta-turn, where substitutions of other amino acid residues were expected to significantly increase the stability from SPMP, and then followed by genetic selection. Val101 to Ala, Gln, and Arg mutations were selected by genetic selection. The Val101-->Ala mutation increased the thermal stability of E. coli RNase HI by 2.0 degrees C in Tm at pH 5.5, whereas the Val101-->Gln and Val101-->Arg mutations decreased the thermostability. Separately, the Lys99-->Pro and Asn100-->Gly mutations were also introduced directly. The Lys99-->Pro mutation increased the thermostability of E. coli RNase HI by 1.8 degrees C in Tm at pH 5.5, whereas the Asn100-->Gly mutation decreased the thermostability by 17 degrees C. In addition, the Lys99-->Pro mutation altered the dependence of the enzymatic activity on divalent metal ions.     

Further improvement of phosphite dehydrogenase thermostability by saturation mutagenesis

Phosphite dehydrogenase represents a new enzymatic system for regenerating reduced nicotinamide cofactors for industrial biocatalysis. We previously engineered a variant of phosphite dehydrogenase with relaxed cofactor specificity and significantly increased activity and stability. Here we performed one round of random mutagenesis followed by comprehensive saturation mutagenesis to further improve the enzyme thermostability while maintaining its activity. Two new thermostabilizing mutations were identified. These, along with the 12 mutations previously identified, were subjected to saturation mutagenesis using the parent enzyme or the engineered thermostable variant 12x as a template, followed by screening of variants with increased thermostability. Of the 12 previously identified sites, 6 yielded new variants with improved stability over the parent enzyme. Several mutations were found to be context-dependent. On the basis of molecular modeling and biochemical analysis, various mechanisms of thermostabilization were identified. Combining the most thermostabilizing mutation at each site resulted in a variant that showed a 100-fold increase in half-life at 62 degrees C over the 12x mutant. The final mutant has improved the half-life of thermal inactivation at 45 degrees C by 23,000-fold over the parent enzyme. The engineered phosphite dehydrogenase will be useful in NAD(P)H regeneration.     

通过体外分子进化技术提高淀粉液化芽胞杆菌BS5582 β-1,3-1,4-葡聚糖酶热稳定性

应用基于易错PCR随机突变的体外分子进化技术,来提高淀粉液化芽胞杆菌β-1,3-1,4-葡聚糖酶的热稳定性。利用建立的基于96微孔板高通量筛选模型,经过两轮定向进化与高通量筛选,共筛选得到3株热稳定性明显提高的突变体2-JF-01、2-JF-02和2-JF-03。将野生型β-葡聚糖酶基因和热稳定性提高的突变基因的高效表达产物经镍亲和层析柱纯化后,酶学性质测定表明突变酶2-JF-01、2-JF-02和2-JF-03的T50值分别比野生酶(53℃)提高2.2℃、5.5℃和3.5℃。突变酶2-JF-01、2-JF-02和2-JF-03在60℃下的半衰期t1/2,60℃(min)分别比野生酶(18min)提高4min、13min和17min。突变酶2-JF-01、2-JF-02和2-JF-03的Vmax值为286μmol/(mg·min)、304μmol/(mg·min)和279μmol/(mg·min),分别比野生型下降8.3%、2.6%和10.6%。突变酶2-JF-01、2-JF-02和2-JF-03的Km值分别为6.76mg/mL、6.19μmg/mL和6.84mg/mL,与野生型(6.29mg/mL)基本相同。序列分析表明,3个突变体共发生7个氨基酸替代:2-JF-01(N36S,G213R)、2-JF-02(C86R,S115I,N150G)和2-JF-03(E156V,K105R)。同源建模表明,7个氨基酸替代中5个位于蛋白质表面或表面洞穴中,42.8%的替代氨基酸是精氨酸,也表明精氨酸在提高β-1,3-1,4-葡聚糖酶热稳定性中起重要的作用。     

Investigations on the activation of recombinant microbial pro-transglutaminase: in contrast to proteinase K, dispase removes the histidine-tag

In order to produce recombinant microbial transglutaminase (rMTG) which is free of the activating protease, dispase was used to activate the pro-rMTG followed by immobilized metal affinity chromatography (IMAC). As shown by MALDI-MS, the dispase does not only cleave the pro-sequence, but unfortunately also cleaves within the C-terminal histidine-tag. Hence, the active rMTG cannot properly bind to the IMAC material. As an alternative, proteinase K was investigated. This protease was successfully applied for the activation of purified pro-rMTG either as free or immobilized enzyme and the free enzyme was also applicable directly in the crude cell extract of E. coli. Thus, it enables a simple two-step activation/purification procedure resulting in protease-free and almost pure transglutaminase preparations. The protocol has been successfully applied to both, wild-type transglutaminase of Streptomyces mobaraensis as well as to the highly active variant S2P. Proteinase K activates the pro-rMTG without unwanted degradation of the histidine-tag. It turned out to be very important to inhibit proteinase K activity, e.g., by PMSF, prior to protein separation by SDS-PAGE.     

Functional expression and stabilization of horseradish peroxidase by directed evolution in Saccharomyces cerevisiae

Biotechnology applications of horseradish peroxidase (HRP) would benefit from access to tailor-made variants with greater specific activity, lower K(m) for peroxide, and higher thermostability. Starting with a mutant that is functionally expressed in Saccharomyces cerevisiae, we used random mutagenesis, recombination, and screening to identify HRP-C mutants that are more active and stable to incubation in hydrogen peroxide at 50 degrees C. A single mutation (N175S) in the HRP active site was found to improve thermal stability. Introducing this mutation into an HRP variant evolved for higher activity yielded HRP 13A7-N175S, whose half-life at 60 degrees C and pH 7.0 is three times that of wild-type (recombinant) HRP and a commercially available HRP preparation from Sigma (St. Louis, MO). The variant is also more stable in the presence of H(2)O(2), SDS, salts (NaCl and urea), and at different pH values. Furthermore, this variant is more active towards a variety of small organic substrates frequently used in diagnostic applications. Site-directed mutagenesis to replace each of the four methionine residues in HRP (M83, M181, M281, M284) with isoleucine revealed no mutation that significantly increased the enzyme's stability to hydrogen peroxide.     

Cumulative effect of amino acid replacements results in enhanced thermostability of potato type L alpha-glucan phosphorylase

The thermostability of potato type L alpha-glucan phosphorylase (EC 2.4.1.1) was enhanced by random and site-directed mutagenesis. We obtained three single-residue mutations-Phe39-->Leu (F39L), Asn135-->Ser (N135S), and Thr706-->Ile (T706I)-by random mutagenesis. Although the wild-type enzyme was completely inactivated, these mutant enzymes retained their activity even after heat treatment at 60 degrees C for 2 h. Combinations of these mutations were introduced by site-directed mutagenesis. The simultaneous mutation of two (F39L/N135S, F39L/T706I, and N135S/T706I) or three (F39L/N135S/T706I) residues further increased the thermostability of the enzyme, indicating that the effect of the replacement of the residues was cumulative. The triple-mutant enzyme, F39L/N135S/T706I, retained 50% of its original activity after heat treatment at 65 degrees C for 20 min. Further analysis indicated that enzymes with a F39L or T706I mutation were resistant to possible proteolytic degradation.     

Combinatorial engineering to enhance thermostability of amylosucrase

Amylosucrase is a transglucosidase that catalyzes amylose-like polymer synthesis from sucrose substrate. About 60,000 amylosucrase variants from two libraries generated by the MutaGen random mutagenesis method were submitted to an in vivo selection procedure leading to the isolation of more than 7000 active variants. These clones were then screened for increased thermostability using an automated screening process. This experiment yielded three improved variants (two double mutants and one single mutant) showing 3.5- to 10-fold increased half-lives at 50 degrees C compared to the wild-type enzyme. Structural analysis revealed that the main differences between wild-type amylosucrase and the most improved variant (R20C/A451T) might reside in the reorganization of salt bridges involving the surface residue R20 and the introduction of a hydrogen-bonding interaction between T451 of the B' domain and D488 of flexible loop 8. This double mutant is the most thermostable amylosucrase known to date and the only one usable at 50 degrees C. At this temperature, amylose synthesis by this variant using high sucrose concentration (600 mM) led to the production of amylose chains twice as long as those obtained by the wild-type enzyme at 30 degrees C.     

Directed evolution of the thermostable xylanase from Thermomyces lanuginosus

The thermostability of the endo-beta-1,4-xylanase from Thermomyces lanuginosus (xynA) was improved by directed evolution using error-prone PCR. Transformants expressing the variant xylanases were first selected on 0.4% Remazol Brilliant Blue-xylan and then exposed to 80 degrees C. Whereas the wild type XynA lost 90% activity after 10 min at 80 degrees C, five mutants displayed both higher stabilities and activities than XynA. Four mutants were subjected to further mutagenesis to improve the stability and activity of the xylanase. Subsequent screening revealed three mutants with enhanced thermostability. Mutant 2B7-10 retained 71% of its activity after treatment at 80 degrees C for 60 min and had a half-life of 215 min at 70 degrees C, which is higher than that attained by XynA. Sequence analysis of second generation mutants revealed that mutations were not concentrated in any particular region of the protein and exhibited much variation. The best mutant obtained from this study was variant 2B7-10, which had a single substitution (Y58F) in beta-sheet A of the protein, which is the hydrophilic, solvent-accessible outer surface of the enzyme. Most of the mutants obtained in this study displayed a compromise between stability and activity, the only exception being mutant 2B7-10. This variant showed increased activity and thermostability.     

Cumulative improvements of thermostability and pH-activity profile of Aspergillus niger PhyA phytase by site-directed mutagenesis

Aspergillus niger phytase (PhyA) has been used as a feed supplement to reduce manure phosphorus excretion of swine and poultry but lacks sufficient thermostability for feed pelleting and appropriate pH-activity profile for phytate hydrolysis in the stomach of animals. Previously, a thermostable mutant PhyA18 and two pH-activity profile-improved mutants E228K and K300E were developed. In this study, the mutations were combined to determine if both improvements were cumulative. Four substitutions (S149P, F131L, K112R, and K195R) identified from random mutagenesis were added sequentially to the combined mutants to further improve their thermostability. Mutant E228K shifted the optimum pH of the parent one from 5.5 to 4.0 and increased (P < 0.05) its specific activity at pH 3.5, whereas mutant K300E eliminated the activity dip at pH 3.5 shown in the wild type. Mutant S149P further improved thermostability over PhyA18. Our results illustrate the feasibility and structural basis to improve thermostability and pH-activity profile of PhyA phytase by assembling mutations derived from rational design and random mutagenesis.     

Enhancing thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2 by DNA shuffling

DNA shuffling was used to improve the thermostability of maltogenic amylase from Bacillus thermoalkalophilus ET2. Two highly thermostable mutants, III-1 and III-2, were generated after three rounds of shuffling and recombination of mutations. Their optimal reaction temperatures were all 80 degrees C, which was 10 degrees C higher than that of the wild-type. The mutant enzyme III-1 carried seven mutations: N147D, F195L, N263S, D311G, A344V, F397S, and N508D. The half-life of III-1 was about 20 times greater than that of the wild-type at 78 degrees C. The mutant enzyme III-2 carried M375T in addition to the mutations in III-1, which was responsible for the decrease in specific activity. The half-life of III-2 was 568 min while that of the wild-type was < 1 min at 80 degrees C. The melting temperatures of III-1 and III-2, as determined by differential scanning calorimetry, increased by 6.1 degrees C and 11.4 degrees C, respectively. Hydrogen bonding, hydrophobic interaction, electrostatic interaction, proper packing, and deamidation were predicted as the mechanisms for the enhancement of thermostability in the enzymes with the mutations.     

Structural basis of thermostability. Analysis of stabilizing mutations in subtilisin BPN'

The crystal structures of two thermally stabilized subtilisin BPN' variants, S63 and S88, are reported here at 1.8 and 1.9 A resolution, respectively. The micromolar affinity calcium binding site (site A) has been deleted (Delta75-83) in these variants, enabling the activity and thermostability measurements in chelating conditions. Each of the variants includes mutations known previously to increase the thermostability of calcium-independent subtilisin in addition to new stabilizing mutations. S63 has eight amino acid replacements: D41A, M50F, A73L, Q206W, Y217K, N218S, S221C, and Q271E. S63 has 75-fold greater stability than wild type subtilisin in chelating conditions (10 mm EDTA). The other variant, S88, has ten site-specific changes: Q2K, S3C, P5S, K43N, M50F, A73L, Q206C, Y217K, N218S, and Q271E. The two new cysteines form a disulfide bond, and S88 has 1000 times greater stability than wild type subtilisin in chelating conditions. Comparisons of the two new crystal structures (S63 in space group P2(1) with A cell constants 41.2, 78.1, 36.7, and beta = 114.6 degrees and S88 in space group P2(1)2(1)2(1) with cell constants 54.2, 60.4, and 82.7) with previous structures of subtilisin BPN' reveal that the principal changes are in the N-terminal region. The structural bases of the stabilization effects of the new mutations Q2K, S3C, P5S, D41A, Q206C, and Q206W are generally apparent. The effects are attributed to the new disulfide cross-link and to improved hydrophobic packing, new hydrogen bonds, and other rearrangements in the N-terminal region.     

Rationally selected single-site mutants of the Thermoascus aurantiacus endoglucanase increase hydrolytic activity on cellulosic substrates

Variants of the Thermoascus aurantiacus Eg1 enzyme with higher catalytic efficiency than wild-type were obtained via site-directed mutagenesis. Using a rational mutagenesis approach based on structural bioinformatics and evolutionary analysis, two positions (F16S and Y95F) were identified as priority sites for mutagenesis. The mutant and parent enzymes were expressed and secreted from Pichia pastoris and the single site mutants F16S and Y95F showed 1.7- and 4.0-fold increases in k(cat) and 1.5- and 2.5-fold improvements in hydrolytic activity on cellulosic substrates, respectively, while maintaining thermostability. Similar to the parent enzyme, the two variants were active between pH 4.0 and 8.0 and showed optimal activity at temperature 70°C at pH 5.0. The purified enzymes were active at 50°C for over 12 h and retained at least 80% of initial activity for 2 h at 70°C. In contrast to the improved hydrolysis seen with the single mutation enzymes, no improvement was observed with a third variant carrying a combination of both mutations, which instead showed a 60% reduction in catalytic efficiency. This work further demonstrates that non-catalytic amino acid residues can be engineered to enhance catalytic efficiency in pretreatment enzymes of interest.     

New strategy for specific activation of recombinant microbial pro-transglutaminase by introducing an enterokinase cleavage site

Recombinant microbial transglutaminase (rMTG) is usually expressed as a soluble zymogen (pro-rMTG) in heterologous expression systems but proteolytic activation of the inactive pro-rMTG is essential. Instead of screening proteases for activating pro-rMTG, we examined an alternative method by introducing a specific cleavage site of enterokinase between the pro-peptide and mature rMTG, generating three pro-rMTG variants (Pro-mrMTG, Pro-m-rMTG and mPro-rMTG). Pro-mrMTG and Pro-m-rMTG were activated by enterokinase without degrading mature rMTG. The activation productivity of Pro-m-rMTG by enterokinase reached 92 % after 22 h activation, while the activation productivity of Pro-rMTG activated by trypsin was 47 %. MALDI-MS analysis revealed that the pro-peptide including the cleavage site was specifically removed from Pro-m-rMTG after activation. This methodology has the potential to be applied in rMTG production by incorporating highly specific cleavage sites of other proteases.     

Mutations of barley β-amylase that improve substrate-binding affinity and thermostability

Three allelic forms of barley beta-amylase (Sd1, Sd2H and Sd2L) exhibit different thermostability and kinetic properties. These differences critically influence the malting quality of barley varieties. To understand the molecular basis for the different properties of these three allelic forms, Sd1 and Sd2L beta-amylase cDNAs were cloned, and the effects of the amino acid substitutions between them were evaluated by site-directed mutagenesis. The results showed that an R115C mutation is responsible for the difference in kinetic properties. This substitution resulted in an additional hydrogen bond which may create a more favourable environment for substrate-binding. The different thermostabilities of the beta-amylase forms are due to two amino acid substitutions (V233A and L347S), which increased the enzyme's thermostability index T50 by 1.9 degrees C and 2.1 degrees C, respectively. The increased thermostability associated with these two mutations may be due to relief of steric strain and the interaction of the protein surface with solvent water. Although both V233A and L347S mutations increased thermostability, they affected the thermostability in different ways. The replacement of L347 by serine seems to increase the thermostability by slowing thermal unfolding of the protein during heating, while the replacement of V233 by alanine appears to cause an acceleration of the refolding after heating. Because the different beta-amylase properties determined by the three mutations (R115C, V233A and L347S) are associated with malting quality of barley variety, a mutant with high thermostability and substrate-binding affinity was generated by combining the three preferred amino acid residues C115, A233 and S347 together. A possible approach to producing barley varieties with better malting quality by genetic engineering is discussed.     

Directed evolution study of temperature adaptation in a psychrophilic enzyme

We have used laboratory evolution methods to enhance the thermostability and activity of the psychrophilic protease subtilisin S41, with the goal of investigating the mechanisms by which this enzyme can adapt to different selection pressures. A combined strategy of random mutagenesis, saturation mutagenesis and in vitro recombination (DNA shuffling) was used to generate mutant libraries, which were screened to identify enzymes that acquired greater thermostability without sacrificing low-temperature activity. The half-life of seven-amino acid substitution variant 3-2G7 at 60 degrees C is approximately 500 times that of wild-type and far surpasses those of homologous mesophilic subtilisins. The dependence of half-life on calcium concentration indicates that enhanced calcium binding is largely responsible for the increased stability. The temperature optimum of the activity of 3-2G7 is shifted upward by approximately 10 degrees C. Unlike natural thermophilic enzymes, however, the activity of 3-2G7 at low temperatures was not compromised. The catalytic efficiency, k(cat)/K(M), was enhanced approximately threefold over a wide temperature range (10 to 60 degrees C). The activation energy for catalysis, determined by the temperature dependence of k(cat)/K(M) in the range 15 to 35 degrees C, is nearly identical to wild-type and close to half that of its highly similar mesophilic homolog, subtilisin SSII, indicating that the evolved S41 enzyme retained its psychrophilic character in spite of its dramatically increased thermostability. These results demonstrate that it is possible to increase activity at low temperatures and stability at high temperatures simultaneously. The fact that enzymes displaying both properties are not found in nature most likely reflects the effects of evolution, rather than any intrinsic physical-chemical limitations on proteins.     

Improved thermostability of bacillus circulans cyclodextrin glycosyltransferase by the introduction of a salt bridge

Cyclodextrin glycosyltransferase (CGTase) catalyzes the formation of cyclodextrins from starch. Among the CGTases with known three-dimensional structure, Thermoanaerobacterium thermosulfurigenes CGTase has the highest thermostability. By replacing amino acid residues in the B-domain of Bacillus circulans CGTase with those from T. thermosulfurigenes CGTase, we identified a B. circulans CGTase mutant (with N188D and K192R mutations), with a strongly increased activity half-life at 60 degrees C. Asp188 and Arg192 form a salt bridge in T. thermosulfurigenes CGTase. Structural analysis of the B. circulans CGTase mutant revealed that this salt bridge is also formed in the mutant. Thus, the activity half-life of this enzyme can be enhanced by rational protein engineering.     

The consensus concept for thermostability engineering of proteins: further proof of concept

Previously, we calculated a consensus amino acid sequence from 13 homologous fungal phytases. A synthetic gene was constructed and recombinantly expressed. Surprisingly, consensus phytase-1 was 15-26 degrees C more thermostable than all parent phytases used in its design [Lehmann et al. (2000)Protein Eng., 13, 49-57]. In the present study, inclusion of six further phytase sequences in the amino acid sequence alignment resulted in the replacement of 38 amino acid residues in either one or both of the new consensus phytases-10 and -11. Since consensus phytase-10, again, was 7.4 degrees C more thermostable than consensus phytase-1, the thermostability effects of most of the 38 amino acid substitutions were tested by site-directed mutagenesis. Both stabilizing and destabilizing mutations were identified, but all affected the stability of the enzyme by <3 degrees C. The combination of all stabilizing amino acid exchanges in a multiple mutant of consensus phytase-1 increased the unfolding temperature from 78.0 to 88.5 degrees C. Likewise, back-mutation of four destabilizing amino acids and introduction of an additional stabilizing amino acid in consensus phytase-10 further increased the unfolding temperature from 85.4 to 90.4 degrees C. The thermostabilization achieved is the result of a combination of slight improvements from multiple amino acid exchanges rather than being the effect of a single or of just a few dominating mutations that have been introduced by chance. The present findings support the general validity of the consensus concept for thermostability engineering of proteins.     

An additional aromatic interaction improves the thermostability and thermophilicity of a mesophilic family 11 xylanase: structural basis and molecular study

In a general approach to the understanding of protein adaptation to high temperature, molecular models of the closely related mesophilic Streptomyces sp. S38 Xyl1 and thermophilic Thermomonospora fusca TfxA family 11 xylanases were built and compared with the three-dimensional (3D) structures of homologous enzymes. Some of the structural features identified as potential contributors to the higher thermostability of TfxA were introduced in Xyl1 by site-directed mutagenesis in an attempt to improve its thermostability and thermophilicity. A new Y11-Y16 aromatic interaction, similar to that present in TfxA and created in Xyl1 by the T11Y mutation, improved both the thermophilicity and thermostability. Indeed, the optimum activity temperature (70 vs. 60 degrees C) and the apparent Tm were increased by about 9 degrees C, and the mutant was sixfold more stable at 57 degrees C. The combined mutations A82R/F168H/N169D/delta170 potentially creating a R82-D169 salt bridge homologous to that present in TfxA improved the thermostability but not the thermophilicity. Mutations R82/D170 and S33P seemed to be slightly destabilizing and devoid of influence on the optimal activity temperature of Xyl1. Structural analysis revealed that residues Y11 and Y16 were located on beta-strands B1 and B2, respectively. This interaction should increase the stability of the N-terminal part of Xyl1. Moreover, Y11 and Y16 seem to form an aromatic continuum with five other residues forming putative subsites involved in the binding of xylan (+3, +2, +1, -1, -2). Y11 and Y16 might represent two additional binding subsites (-3, -4) and the T11Y mutation could thus improve substrate binding to the enzyme at higher temperature and thus the thermophilicity of Xyl1.     

Thermostability improvement of maltogenic amylase MAUS149 by error prone PCR

The thermostability of maltogenic amylase from Bacillus sp. US149 (MAUS149) was improved by random mutagenesis using error prone PCR. The library constructed for the mutants obtained was subjected to screening, leading to the selection of a thermostable mutant enzyme named MA-A27. The latter was noted to contain four single mutations, namely D46V, P78L, V145A, and K548E. The half-life times recorded for MA-A27 at 50 °C and 55 °C were 70 min and 25 min, compared to 30 min and 13 min for the wild type, respectively. The results from molecular modeling attributed the increase in thermostability observed for MA-A27 to P78L and K548E substitutions that led to new hydrogen bond and salt bridge formations. Further site-directed mutagenesis studies showed that the P78L and K548E single mutations underwent an increase in thermostability, thus confirming the joint contribution of both substitutions to the increase in thermostability observed for MA-A27.