Development of medium for enhanced production of glutaminase-free <Emphasis Type="SmallCaps">l</Emphasis>-asparaginase from <Emphasis Type="Italic">Pectobacterium carotovorum</Emphasis> MTCC 1428

Glutaminase-free l-asparaginase is known to be an excellent anticancer agent. In the present study, statistically based experimental designs were applied to maximize the production of glutaminase-free l-asparaginase from Pectobacterium carotovorum MTCC 1428. Nine components of the medium were examined for their significance on the production of l-asparaginase using the Plackett–Burman experimental design. The medium components, viz., glucose, l-asparagine, KH₂PO₄, and MgSO₄·7H₂O, were screened based on their high confidence levels (P < 0.04). The optimum levels of glucose, l-asparagine, KH₂PO₄, and MgSO₄·7H₂O were found to be 2.076, 5.202, 1.773, and 0.373 g L⁻¹, respectively, using the central composite experimental design. The maximum specific activity of l-asparaginase in the optimized medium was 27.88 U mg⁻¹ of protein, resulting in an overall 8.3-fold increase in the production compared to the unoptimized medium.     

Bioactive metabolites from <Emphasis Type="Italic">Penicillium</Emphasis> sp., an endophytic fungus residing in <Emphasis Type="Italic">Hopea hainanensis</Emphasis>

The metabolites of endophytic fungus Penicillium sp. from the leaf of Hopea hainanensis were reported for the first time. By bioassay-guided fractionation, the EtOAc extract of a solid-matrix steady culture of this fungus afforded six compounds, which were identified through a combination of spectral and chemical methods (IR, MS, ¹H- and ¹³C-NMR) to be monomethylsulochrin (1), rhizoctonic acid (2), asperfumoid (3), physcion (4), 7,8-dimethyl-iso-alloxazine (5) and 3,5-dichloro-p-anisic acid (6). Compounds 2, 3 and 6 were obtained from Penicillium sp. for the first time. All of the six isolates were subjected to in vitro bioactive assays including antifungal action against three human pathogenic fungi Candida albicans, Trichophyton rubrum and Aspergillus niger and cytotoxic activity against the human nasopharyngeal epidermoid tumor KB cell line and human liver cancer HepG2 cell line. As a result, compounds 2–4 and 6 inhibited the growth of C. albicans with MICs of 40.0, 20.0, 50.0 and 15.0 μg/ml, respectively and the compound 6 showed growth inhibition against A. niger with MICs of 40.0 μg/ml. In addition, compounds 1–3 and 6 exhibited cytotoxic activity against KB cell line with IC₅₀ value of 30.0, 20.0, 20.0, 5.0 μg/ml, respectively and against HepG2 cell line with IC₅₀ value of 30.0, 25.0, 15.0, 10.0 μg/ml, respectively.     

Acaricidal effects of <Emphasis Type="Italic">Corymbia citriodora</Emphasis> oil containing <Emphasis Type="Italic">para</Emphasis>-menthane-3,8-diol against nymphs of <Emphasis Type="Italic">Ixodes ricinus</Emphasis> (Acari: Ixodidae)

The toxicity of para-menthane-3,8-diol (PMD), the main arthropod-repellent compound in the oil of the lemon eucalyptus, Corymbia citriodora, was evaluated against nymphs of Ixodes ricinus using five methods (A–E) of a contact toxicity bioassay. Mortality rates were estimated by recording numbers of dead nymphs at 30 min intervals during the first 5 h after the start of exposure and at longer intervals thereafter. The mortality rate increased with increasing concentration of PMD and duration of exposure with a distinct effect after 3.5 h. From the results obtained by methods A, C and E, the LC₅₀ range was 0.035–0.037 mg PMD/cm² and the LC₉₅ range was 0.095–0.097 mg PMD/cm² at 4 h of exposure; the LT₅₀ range was 2.1–2.8 h and the LT₉₅ range was 3.9–4.2 h at 0.1 mg PMD/cm². To determine the duration of toxic activity of PMD, different concentrations (0.002, 0.01, 0.1 mg PMD/cm²) were tested and mortality was recorded at each concentration after 1 h; thereafter new ticks were tested. This test revealed that the lethal activity of PMD remained for 24 h but appeared absent after 48 h. The overall results show that PMD is toxic to nymphs of I. ricinus and may be useful for tick control.     

Optimization of <Emphasis Type="Italic">Verticillium lecanii</Emphasis> spore production in solid-state fermentation on sugarcane bagasse

Verticillium lecanii is an entomopathogen with high potential in biological control of pests. We developed a solid-state fermentation with sugarcane bagasse as carrier absorbing liquid medium to propagate V. lecanii spores. Using statistical experimental design, we optimized the medium composition for spore production. We first used one-factor-at-a-time design to identify corn flour and yeast extract as the best carbon and nitrogen sources for the spore production of V. lecanii. Then, we used two-level fractional factorial design to confirm corn flour, yeast extract, and KH₂PO₄ as important factors significantly affecting V. lecanii spore production. Finally, we optimized these selected variables using a central composite design and response surface method. The optimal medium composition was (grams per liter): corn flour 35.79, yeast 8.69, KH₂PO₄ 1.63, K₂HPO₄ 0.325, and MgSO₄ 0.325. Under optimal conditions, spore production reached 1.1 × 10¹⁰ spores/g dried carrier, much higher than that on wheat bran (1.7 × 10⁹ spores/g initial dry matter).     

Submerged culture of a mycelial formulation of a bioherbicidal strain of <Emphasis Type="Italic">Myrothecium </Emphasis><Emphasis Type="Italic">verrucaria</Emphasis> with mitigated mycotoxin production

A mycelial formulation of the fungus Myrothecium verrucaria (IMI 361690) containing 0.20% Silwet L-77 surfactant was found to be highly efficacious in controlling the exotic invasive weed kudzu. The mycelium can be rapidly (48–72 h) produced in several media, including an inexpensive soy flour–corn meal medium. Mycelial yields were 2, 10, and 25 g dry weight l⁻¹ in Czapek-Dox, Richard’s V-8, and soy flour–corn meal media, respectively. Scale-up production in soy flour–corn meal medium using laboratory fermenters (10–25 l), resulted in a mycelial formulation that caused 90% mortality of naturally-occurring mature (0.9–1.0 m in height) kudzu within 48 h after application in field experiments. HPLC analyses revealed that the mycelium produced in this liquid culture contained no detectable amounts of the trichothecene mycotoxins roridin A and verrucarin A (limit of detection 2 μg ml⁻¹). This has resulted in a safer, yet effective bioherbicidal product. We anticipate that these findings should improve the probability of EPA registration and subsequent commercial development of this bioherbicide.     

Purification and properties of <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis><Emphasis Type="Italic">S</Emphasis>-adenosylmethionine synthetase expressed in recombinant <Emphasis Type="Italic">Pichia pastoris</Emphasis>

An intracellular S-adenosylmethionine synthetase (SAM-s) was purified from the fermentation broth of Pichia pastoris GS115 by a sequence chromatography column. It was purified to apparent homogeneity by (NH₄)₂SO₄ fractionation (30–60%), anion exchange, hydrophobic interaction, anion exchange and gel filtration chromatography. HPLC showed the purity of purified SAM-s was 91.2%. The enzyme was purified up to 49.5-fold with a final yield of 20.3%. The molecular weight of the homogeneous enzyme was 43.6 KDa, as determined by electro-spray ionization mass spectrometry (ESI-MS). Its isoelectric point was approximately 4.7, indicating an acidic character. The optimum pH and temperature for the enzyme reaction were 8.5 and 35 °C, respectively. The enzyme was stable at pH 7.0–9.0 and was easy to inactivate in acid solution (pH ≤ 5.0). The temperature stability was up to 45 °C. Metal ions, such as, Mn²⁺ and K⁺ at the concentration of 5 mM had a slight activation effect on the enzyme activity and the Mg²⁺ activated the enzyme significantly. The enzyme activity was strongly inhibited by heavy metal ions (Cu²⁺ and Ag²⁺) and EDTA. The purified enzyme from the transformed Pichia pastoris synthesized S-adenosylmethionine (SAM) from ATP and l-methionine in vitro with a K _m of 120 and 330 μM and V _max of 8.1 and 23.2 μmol/mg/min for l-methionine and ATP, respectively.     

Optimization and mechanism of diacetyl accumulation by <Emphasis Type="Italic">Enterobacter</Emphasis><Emphasis Type="Italic">aerogenes</Emphasis> mutant UV-3

A mutant designated as UV-3 was obtained from wild-type Enterobacter aerogenes 10293 through u.v. radiation. The activities of α-acetolactate decarboxylase (Ald), lactate dehydrogenase (Ldh) and diacetyl reductase (Dr) in UV-3 were strongly attenuated, with the lowest activities at pH 7.0–7.5, and temperature between 36 and 39°C. Compared to the wild-type, the yield of diacetyl by UV-3 was increased 18.7-fold, up to 1.05 ± 0.01 g l⁻¹. Acetoin and ethanol productions were decreased by 48.4 and 71.4%, respectively, but acetate yield was increased by 34.6%. Optimum medium for diacetyl production by UV-3 contained 10% glucose, 0.5% peptone, 0.5% yeast extract powder, 0.01% (NH₄)₂SO₄, 0.1% citric acid, 0.2% MnSO₄ and 0.2% MgSO_4, and this was determined by one-factor-at-a-time approach. Data from the five level central composite designs demonstrated that initial pH of 7.0, temperature of 37°C and rotational speed of 180 rev/min were optimum processing parameters for diacetyl production. The maximum yield of diacetyl could reach 1.35 g l⁻¹ in a 5-l bioreactor. These results showed an enhancement of the non-enzymatic oxidative decarboxylation of α-acetolactate and a decrease in the activities of Ald, Ldh and Dr as a consequence of diacetyl accumulation in UV-3.     

Expression,purification and characterization of pectate lyase A from <Emphasis Type="Italic">Aspergillus nidulans</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Pectate lyase A (PelA) of Aspergillus nidulans was successfully expressed in Escherichia coli and effectively purified using a Ni²⁺-nitrilotriacetate-agarose column. Enzyme activity of the recombinant PelA could reach 360 U ml⁻¹ medium. The expressed PelA exhibited its optimum level of activity over the range of pH 7.5–10 at 50°C. Mn²⁺, Ca²⁺, Fe²⁺, Mg²⁺ and Fe³⁺ ions stimulated the pectate lyase activity, but Cu²⁺ and Zn²⁺ inhibited it. The recombinant PelA had a V _max of 77 μmol min⁻¹ mg⁻¹ and an apparent K _m of 0.50 mg ml⁻¹ for polygalacturonic acid. Low-esterified pectin was the optimum substrate for the PelA, whereas higher-esterified pectin was hardly cleaved by it. PelA efficiently macerated mung bean hypocotyls and potato tuber tissues into single cells.     

Quantitative Structure-Activity Relationships for the Pre-Steady State of <Emphasis Type="Italic">Pseudomonas Species</Emphasis> Lipase Inhibitions by <Emphasis Type="Italic">p</Emphasis>-Nirophenyl-<Emphasis Type="Italic">N</Emphasis>-Substituted Carbamates

The pre-steady states of Pseudomonas species lipase inhibitions by p-nitrophenyl-N-substituted carbamates (1–6) are composed of two steps: (1) formation of the non-covalent enzyme–inhibitor complex (E:I) from the inhibitor and the enzyme and (2) formation of the tetrahedral enzyme–inhibitor adduct (E–I) from the E:I complex. From a stopped-flow apparatus, the dissociation constant for the E:I complex, K_S, and the rate constant for formation of the tetrahedral E–I adduct from the E:I complex, k₂ are obtained from the non-linear least-squares of curve fittings of first-order rate constant (k_obs) versus inhibition concentration ([I]) plot against k_obs=k₂+k₂[I]/(K_S+[I]). Values of pK_S, and log k₂ are linearly correlated with the σ^* values with the ρ^* values of −2.0 and 0.36, respectively. Therefore, the E:I complexes are more positive charges than the inhibitors due to the ρ^* value of −2.0. The tetrahedral E–I adducts on the other hand are more negative charges than the E:I complexes due to the ρ^* value of 0.36. Formation of the E:I complex from the inhibitor and the enzyme are further divided into two steps: (1) the pre-equilibrium protonation of the inhibitor and (2) formation of the E:I complex from the protonated inhibitor and the enzyme.     

Optimized expression of an acid xylanase from <Emphasis Type="Italic">Aspergillus usamii</Emphasis> in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and its biochemical characterization

The xylanase gene xyn II from Aspergillus usamii E001 was placed under the control of an alcohol oxidase promoter (AOX1) in the plasmid pPIC9K and integrated into the genome of a methylotrophic yeast, P. pastoris GS115, by electroporation. His⁺ transformants were screened for on the basis of their resistance to G418 and activity assay. A transformant, P. pastoris GSC12, which showed resistance to over 6 mg G418/ml and highest xylanase activity was selected. Recombinant xylanase was secreted by P. pastoris GSC12 24 h after methanol induction of shake-flask cultures, and reached a final yield of 3139. About 68 U/mg 120 h after the induction. The molecular mass of this xylanase was estimated to be 21 kDa by SDS-PAGE. The optimum pH and temperature were 4.2 and 50 °C, respectively. Xylanase was stable below 50 °C and within pH 3.0–7.0. Its activity was increased by EDTA and Co²⁺ ion and strongly inhibited by Mn²⁺, Li⁺ and Ag⁺ ions. The K _m and V _max values with birchwood xylan as the substrate were found to be 5.56 mg/ml and 216 μmol/mg/min, respectively. This is the first report on expression and characterization of xylanase from A. usamii in P. pastoris. The hydrolysis products consisted of xylooligosaccharides together with a small amount of xylose. This property made the enzyme attractive for industrial purposes, as relatively pure xylooligosaccharides could be obtained.     

Mercury Tolerance of Thermophilic <Emphasis Type="Italic">Bacillus</Emphasis> sp. and <Emphasis Type="Italic">Ureibacillus</Emphasis> sp

Although resistance of microorganisms to Hg(II) salts has been widely investigated and resistant strains have been reported from many eubacterial genera, there are few reports of mercuric ion resistance in extremophilic microorganisms. Moderately thermophilic mercury resistant bacteria were selected by growth at 62 °C on Luria agar containing HgCl₂. Sequence analysis of 16S rRNA genes of two isolates showed the closest matches to be with Bacillus pallidus and Ureibacillus thermosphaericus. Minimum inhibitory concentration (MIC) values for HgCl₂ were 80 μg/ml and 30 μg/ml for these isolates, respectively, compared to 10 μg/ml for B. pallidus H12 DSM3670, a mercury-sensitive control. The best-characterised mercury-resistant Bacillus strain, B. cereus RC607, had an MIC of 60 μg/ml. The new isolates had negligible mercuric reductase activity but removed Hg from the medium by the formation of a black precipitate, identified as HgS by X-ray powder diffraction analysis. No volatile H₂S was detected in the headspace of cultures in the absence or presence of Hg²⁺, and it is suggested that a new mechanism of Hg tolerance, based on the production of non-volatile thiol species, may have potential for decontamination of solutions containing Hg²⁺ without production of toxic volatile H₂S.     

Purification and characterization of chitinases from <Emphasis Type="Italic">Paecilomyces</Emphasis><Emphasis Type="Italic">variotii</Emphasis> DG-3 parasitizing on <Emphasis Type="Italic">Meloidogyne incognita</Emphasis> eggs

Two extracellular chitinases were purified from Paecilomyces variotii DG-3, a chitinase producer and a nematode egg-parasitic fungus, to homogeneity by DEAE Sephadex A-50 and Sephadex G-100 chromatography. The purified enzymes were a monomer with an apparent molecular mass of 32 kDa (Chi32) and 46 kDa (Chi46), respectively, and showed chitinase activity bands with 0.01% glycol chitin as a substrate after SDS-PAGE. The first 20 and 15 N-terminal amino acid sequences of Chi32 and Chi46 were determined to be Asp-Pro-Typ-Gln-Thr-Asn-Val-Val-Tyr-Thr-Gly-Gln-Asp-Phe-Val-Ser-Pro-Asp-Leu-Phe and Asp-Ala-X-X-Tyr-Arg-Ser-Val-Ala-Tyr-Phe-Val-Asn-Trp-Ala, respectively. Optimal temperature and pH of the Chi32 and Chi46 were found to be both 60°C, and 2.5 and 3.0, respectively. Chi32 was almost inhibited by metal ions Ag⁺ and Hg²⁺ while Chi46 by Hg²⁺ and Pb²⁺ at a 10 mM concentration but both enzymes were enhanced by 1 mM concentration of Co²⁺. On analyzing the hydrolyzates of chitin oligomers [(GlcNAc) _n , n = 2–6)], it was considered that Chi32 degraded chitin oligomers as an exo-type chitinase while Chi46 as an endo-type chitinase.     

Mn<Superscript>2+</Superscript> enhances theanine-forming activity of recombinant glutamine synthetase from <Emphasis Type="Italic">Bacillus subtilis</Emphasis> in <Emphasis Type="Italic">Escherichia coli</Emphasis>

Bacillus subtilis glutamine synthetase (GS) was highly expressed (about 86% of total protein) as soluble protein in Escherichia coli BL21(DE3) containing pET28a-glnA, which was induced by 0.4 mM IPTG in LB medium, and maximal theanine-forming activity of the recombinant GS induced in LB is 6.4 U/mg at a series concentration (0–100 mM) of Mn²⁺ at optimal pH 7.5. In order to get GS with high theanine-forming activity, safety, and low cost for food and pharmaceutics industry, M9-A (details are described in “Materials and methods”) and 0.1% (w/v) lactose were selected as culture medium and inducer respectively. Recombinant GS was also highly expressed (84% of total protein) and totally soluble in M9-A and the specific activity of the recombinant GS is 6.2 U/mg which is approximate to that (6.4 U/mg) induced in LB in the presence of 10 mM Mn²⁺ at optimal pH 7.5. The activity is markedly higher activated by Mn²⁺ than that by other nine bivalent cations. Furthermore, M9-B (5 μM Mn²⁺ was added into M9-A) was used to culture the recombinant strain and theanine-forming activity of the recombinant GS induced in M9-B was improved 20% (up to 7.6 U/mg). Finally, theanine production experiment coupled with yeast fermentation system was carried out in a 1.0 ml reaction system with 0.1 mg crude GS from M9-B or M9-A, and the yield of theanine were 15.3 and 13.1 g/L by paper chromatography and HPLC, respectively.     

Purification and characterization of a <Emphasis Type="Italic">N</Emphasis>-acetylglucosaminidase produced by <Emphasis Type="Italic">Talaromyces emersonii</Emphasis> during growth on algal fucoidan

A β-N-acetylglucosaminidase produced by a novel fungal source, the moderately thermophilic aerobic ascomycete Talaromyces emersonii, was purified to apparent homogeneity. Submerged fermentation of T. emersonii, in liquid medium containing algal fucoidan as the main carbon source, yielded significant amounts of extracellular N-acetylglucosaminidase activity. The N-acetylglucosaminidase present in the culture-supernatant was purified by hydrophobic interaction chromatography and preparative electrophoresis. The enzyme is a dimer with molecular weight and pI values of 140 and 3.85, respectively. Substrate specificity studies confirmed the glycan specificity of the enzyme for N-acetylglucosamine. Michaelis-Menten kinetics were observed during enzyme-catalyzed hydrolysis of the fluorescent substrate methylumbelliferyl-β-D-N-acetylglucosaminide at 50°C, pH 5.0 (K_m value of 0.5 mM). The purified N-acetylglucosaminidase displayed activity over broad ranges of pH and temperature, yielding respective optimum values of pH 5.0 and 75°C. The T. emersonii enzyme was less susceptible to inhibition by N-acetylglucosamine and other related sugars than orthologs from other sources. The enzyme was sensitive to Hg²⁺, Co²⁺ and Fe³⁺.     

Heterologous expression of polyhydroxyalkanoate depolymerase from <Emphasis Type="Italic">Thermobifida</Emphasis> sp. in <Emphasis Type="Italic">Pichia pastoris</Emphasis> and catalytic analysis by surface plasmon resonance

A polyhydroxyalkanote depolymerase gene from Thermobifida sp. isolate BCC23166 was cloned and expressed as a C-terminal His₆-tagged fusion in Pichia pastoris. Primary structure analysis revealed that the enzyme PhaZ-Th is a member of a proposed new subgroup of SCL-PHA depolymerase containing a proline–serine repeat linker. PhaZ-Th was expressed as two glycosylated forms with apparent molecular weights of 61 and 70 kDa, respectively. The enzyme showed esterase activity toward p-nitrophenyl alkanotes with V _max and K _m of 3.63 ± 0.16 μmol min⁻¹ mg⁻¹ and 0.79 ± 0.12 mM, respectively, on p-nitrophenyl butyrate with optimal activity at 50–55°C and pH 7–8. Surface plasmon resonance (SPR) analysis demonstrated that PhaZ-Th catalyzed the degradation of poly-[(R)-3-hydroxybutyrate] (PHB) films, which was accelerated in (R)-3-hydroxyvalerate copolymers with a maximum degradation rate of 882 ng cm⁻² h⁻¹ for poly[(R)-3-hydroxybutyrate-co-3-hydroxyvalerate] (12 mol% V). Surface deterioration, especially on the amorphous regions of PHB films was observed after exposure to PhaZ-Th by atomic force microscopy. The use of P. pastoris as an alternative recombinant system for bioplastic degrading enzymes in secreted form and a sensitive SPR analytical technique will be of utility for further study of bioplastic degradation.     

Molecular cloning,sequence analysis,expression and characterization of the endochitinase gene from <Emphasis Type="Italic">Trichoderma</Emphasis> sp. in <Emphasis Type="Italic">Escherichia coli</Emphasis> BL21

The endochitinase DNA and cDNA from Trichoderma sp. were cloned, sequenced and expressed. The cloned DNA and cDNA sequences were 1,476 and 1,275 bp in length, respectively. There were three introns in DNA sequence in comparison with the cDNA sequence. The endochitinase protein contained three regions: the signal peptide, the prepro-region and the mature protein region. The gene fragment encoding the mature endochitinase was ligated into the expression vector pET-28a+, yielding pET-1. The plasmid pET-1 was transformed into the Escherichia coli BL21 (DE3). The clone bearing pET-1 was picked and cultured at 30°C for the expression of endochitinase. SDS-PAGE analysis showed that the endochitinase was expressed in the periplasmic space and the purified protein showed a single band. The activity of 70.2 U/mg was obtained from the cellular extract of the recombinant strain. The activity of endochitinase was 2.5-fold higher at 24 h than at 16 h in the periplasmic space. The optimal pH and temperature of the recombinant endochitinase were determined to be 7.0 and 35°C, respectively. It was relatively stable within the pH range of 5–8. Significant activity stimulation by 1 mM Mg²⁺ and 5 mM Fe²⁺ and inhibition by 5 mM Co²⁺ and 5 mM Hg²⁺ were observed. The kinetic constants K_m, V_max and K_cat for the hydrolysis of the colloidal chitin were 1.5 mM, 1.37 μmol min⁻¹ and 6.23 min⁻¹, respectively.     

Effect of high temperature on photosynthesis and transpiration of sweet corn (<Emphasis Type="Italic">Zea mays</Emphasis> L. var. <Emphasis Type="Italic">rugosa</Emphasis>)

Four temperature treatments were studied in the climate controlled growth chambers of the Georgia Envirotron: 25/20, 30/25, 35/30, and 40/35 °C during 14/10 h light/dark cycle. For the first growth stage (V3-5), the highest net photosynthetic rate (P _N) of sweet corn was found for the lowest temperature of 28–34 μmol m⁻² s⁻¹ while the P _N for the highest temperature treatment was 50–60 % lower. We detected a gradual decline of about 1 P _N unit per 1 °C increase in temperature. Maximum transpiration rate (E) fluctuated between 0.36 and 0.54 mm h⁻¹ (≈5.0–6.5 mm d⁻¹) for the high temperature treatment and the minimum E fluctuated between 0.25 and 0.36 mm h⁻¹ (≈3.5–5.0 mm d⁻¹) for the low temperature treatment. Cumulative CO₂ fixation of the 40/35 °C treatment was 33.7 g m⁻² d⁻¹ and it increased by about 50 % as temperature declined. The corresponding water use efficiency (WUE) decreased from 14 to 5 g(CO₂) kg⁻¹(H₂O) for the lowest and highest temperature treatments, respectively. Three main factors affected WUE, P _N, and E of Zea: the high temperature which reduced P _N, vapor pressure deficit (VPD) that was directly related to E but did not affect P _N, and quasi stem conductance (QC) that was directly related to P _N but did not affect E. As a result, WUE of the 25/20 °C temperature treatment was almost three times larger than that of 40/35 °C temperature treatment.     

Evaluation of methods for celery (<Emphasis Type="Italic">Apium Graveolens</Emphasis> L.) transformation using <Emphasis Type="Italic">Agrobacterium tumefaciens</Emphasis> and the <Emphasis Type="Italic">bar</Emphasis> gene as selectable marker

Callus selection (CS) and the flamingo-bill explant (FB) methods were evaluated for efficacy in transformation for celery. Agrobacterium tumefaciens strains EHA105 and GV3101, each with the bar gene under the promoters NOS (pGPTV-BAR) or 35S (pDHB321.1), were used. Leaf explants were inoculated and co-cultivated for 2 d in the dark. Calluses emerged on the explants on callus medium (C), Murashige and Skoog (MS) medium + 2,4-Dichlorophenoxyacetic acid (2,4-D) (2.3 μM) + kinetin (2.8 μM) + timentin (300 mg·l⁻¹). Calluses 4- to 6-wk-old were selected for glufosinate (GS) resistance by a two step method. First, calluses were transferred to C medium + GS 0.35, 0.5, 1, 2, 5, or 10 mg·l⁻¹; calluses formed only with 0, 0.35 and 0.5 mg·l⁻¹ GS. All growing calluses from 0 and 0.35 mg·l⁻¹ and a few from 0.5 mg·l⁻¹, were divided and placed back on C + GS 0.35–0.5 mg·l⁻¹ for another 5–6 wk. Second, tolerant clones were again divided and placed on C + GS 1–50 mg·l⁻¹. When cultivar XP85 was inoculated with both strains, using pGPTVBAR, 19 glufosinate resistant (GR) callus clones were selected, but shoots regenerated only for strain EHA105 inoculations. When both of the strains (each with pDHB321.1) were inoculated on cv. XP166, 3 and 12 GR calluses occurred for EHA105 and GV3101, respectively. Using CS, a total of 34 GR callus clones were selected, and shoots were regenerated from over 50% of them on Gamborg B5 medium + 6-(γ, γ-dimethylallylamino) purine 2ip (4.9 μM) + naphthaleneacetic acid (NAA; 1.6 μM) and rooted on MS in 5–6 mo total time. Conversely, using FB with inoculation by GV3101/pDHB321.1 on cv. XP166 yielded putative transgenic celery plants confirmed by polymerase chain reaction (PCR) in just 6 wk. Transformation of the bar gene into celery was confirmed by PCR for 5 and 6 CS and FB lines, respectively. Southern blot analyses indicated 1–2 copies in CS lines and 1 copy in FB lines. Herbicide assays on whole plants with 100 and 300 mg·l⁻¹ glufosinate indicated a range of low to high tolerance for lines derived by both methods. The bar gene was found to be Mendelian inherited in one self-fertile CS derived line.     

<Emphasis Type="Italic">In vitro</Emphasis> flowering of <Emphasis Type="Italic">Perilla frutescens</Emphasis>

This study investigated the factors affecting in vitro flowering of Perilla frutescens. The shoots regenerated from cotyledonary and hypocotyl explants cultured on Murashige and Skoog (MS) medium supplemented with benzyladenine (BA) and indole-3-acetic acid, each at 0.5 mg l⁻¹, were excised and transferred to MS medium containing 30 g l⁻¹ of sucrose, 8.25 g l⁻¹ of ammonium nitrate, and 1.0 mg l⁻¹ of BA. After 40 d of culture, 86.2% of shoots flowered and most of which self-fertilized in vitro and produced mature fruits with viable seeds. These seeds were germinated and plants were grown to maturity and flowered in soil under greenhouse conditions. The in vitro flowering system reported in this study may facilitate rapid breeding of P. frutescens and offers a model system for studying the physiological mechanism of flowering.