A theoretical model successfully identifies features of hepatitis B virus capsid assembly.

The capsids of most spherical viruses are icosahedral, an arrangement of multiples of 60 subunits. Though it is a salient point in the life cycle of any virus, the physical chemistry of virus capsid assembly is poorly understood. We have developed general models of capsid assembly that describe the process in terms of a cascade of low order association reactions. The models predict sigmoidal assembly kinetics, where intermediates approach a low steady state concentration for the greater part of the reaction. Features of the overall reaction can be identified on the basis of the concentration dependence of assembly. In simulations, and on the basis of our understanding of the models, we find that nucleus size and the order of subsequent "elongation" reactions are reflected in the concentration dependence of the extent of the reaction and the rate of the fast phase, respectively. The reaction kinetics deduced for our models of virus assembly can be related to the assembly of any "spherical" polymer. Using light scattering and size exclusion chromatography, we observed polymerization of assembly domain dimers of hepatitis B virus (HBV) capsid protein. Empty capsids assemble at a rate that is a function of protein concentration and ionic strength. The kinetics of capsid formation were sigmoidal, where the rate of the fast phase had second-power concentration dependence. The extent of assembly had third-power concentration dependence. Simulations based on the models recapitulated the concentration dependences observed for HBV capsid assembly. These results strongly suggest that in vitro HBV assembly is nucleated by a trimer of dimers and proceeds by the addition of individual dimeric subunits. On the basis of this mechanism, we suggest that HBV capsid assembly could be an important target for antiviral therapeutics.     

Encapsulation of a polymer by an icosahedral virus

The coat proteins of many viruses spontaneously form icosahedral capsids around nucleic acids or other polymers. Elucidating the role of the packaged polymer in capsid formation could promote biomedical efforts to block viral replication and enable use of capsids in nanomaterials applications. To this end, we perform Brownian dynamics on a coarse-grained model that describes the dynamics of icosahedral capsid assembly around a flexible polymer. We identify several mechanisms by which the polymer plays an active role in its encapsulation, including cooperative polymer-protein motions. These mechanisms are related to experimentally controllable parameters such as polymer length, protein concentration and solution conditions. Furthermore, the simulations demonstrate that assembly mechanisms are correlated with encapsulation efficiency, and we present a phase diagram that predicts assembly outcomes as a function of experimental parameters. We anticipate that our simulation results will provide a framework for designing in vitro assembly experiments on single-stranded RNA virus capsids.     

Mechanical disassembly of single virus particles reveals kinetic intermediates predicted by theory

New experimental approaches are required to detect the elusive transient intermediates predicted by simulations of virus assembly or disassembly. Here, an atomic force microscope (AFM) was used to mechanically induce partial disassembly of single icosahedral T=1 capsids and virions of the minute virus of mice. The kinetic intermediates formed were imaged by AFM. The results revealed that induced disassembly of single minute-virus-of-mice particles is frequently initiated by loss of one of the 20 equivalent capsomers (trimers of capsid protein subunits) leading to a stable, nearly complete particle that does not readily lose further capsomers. With lower frequency, a fairly stable, three-fourths-complete capsid lacking one pentamer of capsomers and a free, stable pentamer were obtained. The intermediates most frequently identified (capsids missing one capsomer, capsids missing one pentamer of capsomers, and free pentamers of capsomers) had been predicted in theoretical studies of reversible capsid assembly based on thermodynamic-kinetic models, molecular dynamics, or oligomerization energies. We conclude that mechanical manipulation and imaging of simple virus particles by AFM can be used to experimentally identify kinetic intermediates predicted by simulations of assembly or disassembly.     

Observed hysteresis of virus capsid disassembly is implicit in kinetic models of assembly

For many protein multimers, association and dissociation reactions fail to reach the same end point; there is hysteresis preventing one and/or the other reaction from equilibrating. We have studied in vitro assembly of dimeric hepatitis B virus (HBV) capsid protein and dissociation of the resulting T = 4 icosahedral capsids. Empty HBV capsids composed of 120 capsid protein dimers were more resistant to dissociation by dilution or denaturants than anticipated from assembly experiments. Using intrinsic fluorescence, circular dichroism, and size exclusion chromatography, we showed that denaturants dissociate the HBV capsids without unfolding the capsid protein; unfolding of dimer only occurred at higher denaturant concentrations. The apparent energy of interaction between dimers measured in dissociation experiments was much stronger than when measured in assembly studies. Unlike assembly, capsid dissociation did not have the concentration dependence expected for a 120-subunit complex; consequently the apparent association energy systematically varied with reactant concentration. These data are evidence of hysteresis for HBV capsid dissociation. Simulations of capsid assembly and dissociation reactions recapitulate and provide an explanation for the observed behavior; these results are also applicable to oligomeric and multidomain proteins. In our calculations, we find that dissociation is impeded by temporally elevated concentrations of intermediates; this has the paradoxical effect of favoring re-assembly of those intermediates despite the global trend toward dissociation. Hysteresis masks all but the most dramatic decreases in contact energy. In contrast, assembly reactions rapidly approach equilibrium. These results provide the first rigorous explanation of how virus capsids can remain intact under extreme conditions but are still capable of "breathing." A biological implication of enhanced stability is that a triggering event may be required to initiate virus uncoating.     

Surveying Capsid Assembly Pathways through Simulation-Based Data Fitting

Virus capsid assembly has attracted considerable interest from the biophysical modeling community as a model system for complicated self-assembly processes. Simulation methods have proven valuable for characterizing the space of possible kinetics and mechanisms of capsid assembly, but they have so far been able to say little about the assembly kinetics or pathways of any specific virus. It is not possible to directly measure the detailed interaction rates needed to parameterize a model, and there is only a limited amount of experimental evidence available to constrain possible pathways, with almost all of it gathered from in vitro studies of purified coat proteins. In prior work, we developed methods to address this problem by using simulation-based data-fitting to learn rate parameters consistent with both structure-based rule sets and experimental light-scattering data on bulk assembly progress in vitro. We have since improved these methods and extended them to fit simulation parameters to one or more experimental light-scattering curves. Here, we apply the improved data-fitting approach to three capsid systems—human papillomavirus (HPV), hepatitis B virus (HBV), and cowpea chlorotic mottle virus (CCMV)—to assess both the range of pathway types the methods can learn and the diversity of assembly strategies in use between these viruses. The resulting fits suggest three different in vitro assembly mechanisms for the three systems, with HPV capsids fitting a model of assembly via a nonnucleation-limited pathway of accumulation of individual capsomers while HBV and CCMV capsids fit similar but subtly different models of nucleation-limited assembly through ensembles of pathways involving trimer-of-dimer intermediates. The results demonstrate the ability of such data fitting to learn very different pathway types and show some of the versatility of pathways that may exist across real viruses.     

Zinc ions trigger conformational change and oligomerization of hepatitis B virus capsid protein

Assembly of virus particles in infected cells is likely to be a tightly regulated process. Previously, we found that in vitro assembly of hepatitis B virus (HBV) capsid protein is highly dependent on protein and NaCl concentration. Here we show that micromolar concentrations of Zn2+ are sufficient to initiate assembly of capsid protein, whereas other mono- and divalent cations elicited assembly only at millimolar concentrations, similar to those required for NaCl-induced assembly. Altered intrinsic protein fluorescence and highly cooperative binding of at least four Zn2+ ions (KD approximately 7 microM) indicated that binding induced a conformational change in capsid protein. At 37 degrees C, Zn2+ enhanced the initial rate of assembly and produced normal capsids, but it did not alter the extent of assembly at equilibrium. Assembly mediated by high zinc concentrations (> or =300 microM) yielded few capsids but produced a population of oligomers recognized by capsid-specific antibodies, suggesting a kinetically trapped assembly reaction. Comparison of kinetic simulations to in vitro assembly reactions leads us to suggest that kinetic trapping was due to the enhancement of the nucleation rate relative to the elongation rate. Zinc-induced HBV assembly has hallmarks of an allosterically regulated process: ligand binding at one site influences binding at other sites (cooperativity) indicating that binding is associated with conformational change, and binding of ligand alters the biological activity of assembly. We conclude that zinc binding enhances the kinetics of assembly by promoting formation of an intermediate that is readily consumed in the reaction. Free zinc ions may not be the true in vivo activator of assembly, but they provide a model for regulation of assembly.     

Periodic Table of Virus Capsids: Implications for Natural Selection and Design

Background

For survival, most natural viruses depend upon the existence of spherical capsids: protective shells of various sizes composed of protein subunits. So far, general evolutionary pressures shaping capsid design have remained elusive, even though an understanding of such properties may help in rationally impeding the virus life cycle and designing efficient nano-assemblies.

Principal Findings

This report uncovers an unprecedented and species-independent evolutionary pressure on virus capsids, based on the the notion that the simplest capsid designs (or those capsids with the lowest “hexamer complexity”, ) are the fittest, which was shown to be true for all available virus capsids. The theories result in a physically meaningful periodic table of virus capsids that uncovers strong and overarching evolutionary pressures, while also offering geometric explanations to other capsid properties (rigidity, pleomorphy, auxiliary requirements, etc.) that were previously considered to be unrelatable properties of the individual virus.

Significance

Apart from describing a universal rule for virus capsid evolution, our work (especially the periodic table) provides a language with which highly diverse virus capsids, unified only by geometry, may be described and related to each other. Finally, the available virus structure databases and other published data reiterate the predicted geometry-derived rules, reinforcing the role of geometry in the natural selection and design of virus capsids.     

The amino-conserved domain of human cytomegalovirus UL80a proteins is required for key interactions during early stages of capsid formation and virus production

Assembly of many spherical virus capsids is guided by an internal scaffolding protein or group of proteins that are often cleaved and eliminated in connection with maturation and incorporation of the genome. In cytomegalovirus there are at least two proteins that contribute to this scaffolding function; one is the maturational protease precursor (pUL80a), and the other is the assembly protein precursor (pUL80.5) encoded by a shorter genetic element within UL80a. Yeast GAL4 two-hybrid assays established that both proteins contain a carboxyl-conserved domain that is required for their interaction with the major capsid protein (pUL86) and an amino-conserved domain (ACD) that is required for their self-interaction and for their interaction with each other. In the work reported here, we demonstrate that when the ACD is deleted (deltaACD) or disrupted by a point mutation (L47A), the bacterially expressed mutant protein sediments as a monomer during rate-velocity centrifugation, whereas the wild-type protein sediments mainly as oligomers. We also show that the L47A mutation reduces the production of infectious virus by at least 90%, results in the formation of irregular nuclear capsids, gives rise to tube-like structures in the nucleus that resemble the capsid core in cross-section and contain UL80 proteins, slows nuclear translocation of the major capsid protein, and may slow cleavage by the maturational protease. We provide physical corroboration that mutating the ACD disrupts self-interaction of the UL80 proteins and biological support for the proposal that the ACD has a critical role in capsid assembly and production of infectious virus.     

Phosphorylation of rubella virus capsid regulates its RNA binding activity and virus replication

Rubella virus is an enveloped positive-strand RNA virus of the family TOGAVIRIDAE: Virions are composed of three structural proteins: a capsid and two membrane-spanning glycoproteins, E2 and E1. During virus assembly, the capsid interacts with genomic RNA to form nucleocapsids. In the present study, we have investigated the role of capsid phosphorylation in virus replication. We have identified a single serine residue within the RNA binding region that is required for normal phosphorylation of this protein. The importance of capsid phosphorylation in virus replication was demonstrated by the fact that recombinant viruses encoding hypophosphorylated capsids replicated at much lower titers and were less cytopathic than wild-type virus. Nonphosphorylated mutant capsid proteins exhibited higher affinities for viral RNA than wild-type phosphorylated capsids. Capsid protein isolated from wild-type strain virions bound viral RNA more efficiently than cell-associated capsid. However, the RNA-binding activity of cell-associated capsids increased dramatically after treatment with phosphatase, suggesting that the capsid is dephosphorylated during virus assembly. In vitro assays indicate that the capsid may be a substrate for protein phosphatase 1A. As capsid is heavily phosphorylated under conditions where virus assembly does not occur, we propose that phosphorylation serves to negatively regulate binding of viral genomic RNA. This may delay the initiation of nucleocapsid assembly until sufficient amounts of virus glycoproteins accumulate at the budding site and/or prevent nonspecific binding to cellular RNA when levels of genomic RNA are low. It follows that at a late stage in replication, the capsid may undergo dephosphorylation before nucleocapsid assembly occurs.     

A small molecule inhibits and misdirects assembly of hepatitis B virus capsids

Hepatitis B virus (HBV) capsids play an important role in viral nucleic acid metabolism and other elements of the virus life cycle. Misdirection of capsid assembly (leading to formation of aberrant particles) may be a powerful approach to interfere with virus production. HBV capsids can be assembled in vitro from the dimeric capsid protein. We show that a small molecule, bis-ANS, binds to capsid protein, inhibiting assembly of normal capsids and promoting assembly of noncapsid polymers. Using equilibrium dialysis to investigate binding of bis-ANS to free capsid protein, we found that only one bis-ANS molecule binds per capsid protein dimer, with an association energy of -28.0 +/- 2.0 kJ/mol (-6.7 +/- 0.5 kcal/mol). Bis-ANS inhibited in vitro capsid assembly induced by ionic strength as observed by light scattering and size exclusion chromatography. The binding energy of bis-ANS for capsid protein calculated from assembly inhibition data was -24.5 +/- 0.9 kJ/mol (-5.9 +/- 0.2 kcal/mol), essentially the same binding energy observed in studies of unassembled protein. These data indicate that capsid protein bound to bis-ANS did not participate in assembly; this mechanism of assembly inhibition is analogous to competitive or noncompetitive inhibition of enzymes. While assembly of normal capsids is inhibited, our data suggest that bis-ANS leads to formation of noncapsid polymers. Evidence of aberrant polymers was identified by light scattering and electron microscopy. We propose that bis-ANS acts as a molecular "wedge" that interferes with normal capsid protein geometry and capsid formation; such wedges may represent a new class of antiviral agent.     

The Structure of Elongated Viral Capsids

There are many viruses whose genetic material is protected by a closed elongated protein shell. Unlike spherical viruses, the structure and construction principles of these elongated capsids are not fully known. In this article, we have developed a general geometrical model to describe the structure of prolate or bacilliform capsids. We show that only a limited set of tubular architectures can be built closed by hemispherical icosahedral caps. In particular, the length and number of proteins adopt a very special set of discrete values dictated by the axial symmetry (fivefold, threefold, or twofold) and the triangulation number of the caps. The results are supported by experimental observations and simulations of simplified physical models. This work brings about a general classification of elongated viruses that will help to predict their structure, and to design viral cages with tailored geometrical properties for biomedical and nanotechnological applications.     

Functional relevance of amino acid residues involved in interactions with ordered nucleic acid in a spherical virus

In the spherical virion of the parvovirus minute virus of mice, several amino acid side chains of the capsid were previously found to be involved in interactions with the viral single-stranded DNA molecule. We have individually truncated by mutation to alanine many (ten) of these side chains and analyzed the effects on capsid assembly, stability and conformation, viral DNA encapsidation, and virion infectivity. Mutation of residues Tyr-270, Asp-273, or Asp-474 led to a drastic reduction in infectivity. Mutant Y270A was defective in capsid assembly; mutant D273A formed stable capsids, but it was essentially unable to encapsidate the viral DNA or to externalize the N terminus of the capsid protein VP2, a connected conformational event. Mutation of residues Asp-58, Trp-60, Asn-183, Thr-267, or Lys-471 led to a moderate reduction in infectivity. None of these mutations had an effect on capsid assembly or stability, or on the DNA encapsidation process. However, those five mutant virions were substantially less stable than the parental virion in thermal inactivation assays. The results with this model spherical virus indicate that several capsid residues that are found to be involved in polar interactions or multiple hydrophobic contacts with the viral DNA molecule contribute to preserving the active conformation of the infectious viral particle. Their effect appears to be mediated by the non-covalent interactions they establish with the viral DNA. In addition, at least one acidic residue at each DNA-binding region is needed for DNA packaging.     

A molecular breadboard: Removal and replacement of subunits in a hepatitis B virus capsid

Hepatitis B virus (HBV) core protein is a model system for studying assembly and disassembly of icosahedral structures. Controlling disassembly will allow re‐engineering the 120 subunit HBV capsid, making it a molecular breadboard. We examined removal of subunits from partially crosslinked capsids to form stable incomplete particles. To characterize incomplete capsids, we used two single molecule techniques, resistive‐pulse sensing and charge detection mass spectrometry. We expected to find a binomial distribution of capsid fragments. Instead, we found a preponderance of 3 MDa complexes (90 subunits) and no fragments smaller than 3 MDa. We also found 90‐mers in the disassembly of uncrosslinked HBV capsids. 90‐mers seem to be a common pause point in disassembly reactions. Partly explaining this result, graph theory simulations have showed a threshold for capsid stability between 80 and 90 subunits. To test a molecular breadboard concept, we showed that missing subunits could be refilled resulting in chimeric, 120 subunit particles. This result may be a means of assembling unique capsids with functional decorations.     

A reaction landscape identifies the intermediates critical for self-assembly of virus capsids and other polyhedral structures

The capsids of spherical viruses may contain from tens to hundreds of copies of the capsid protein(s). Despite their complexity, these particles assemble rapidly and with high fidelity. Subunit and capsid represent unique end states. However, the number of intermediate states in these reactions can be enormous-a situation analogous to the protein folding problem. Approaches to accurately model capsid assembly are still in their infancy. In this paper, we describe a sail-shaped reaction landscape, defined by the number of subunits in each species, the predicted prevalence of each species, and species stability. Prevalence can be calculated from the probability of synthesis of a given intermediate and correlates well with the appearance of intermediates in kinetics simulations. In these landscapes, we find that only those intermediates along the leading edge make a significant contribution to assembly. Although the total number of intermediates grows exponentially with capsid size, the number of leading-edge intermediates grows at a much slower rate. This result suggests that only a minute fraction of intermediates needs to be considered when describing capsid assembly.     

BAY 41-4109 has multiple effects on Hepatitis B virus capsid assembly

Here we report the effect of a heteroaryldihydropyrimidine (HAP) antiviral compound, BAY 41-4109, on Hepatitis B virus (HBV) capsid assembly and on preformed HBV capsids. The HBV capsid is an icosahedral complex of 120 capsid protein dimers. BAY41-4109 inhibits virus production in vivo by a mechanism that targets the viral capsid. We found that BAY 41-4109 was able to both accelerate and misdirect capsid assembly in vitro. As little as one HAP molecule for every five HBV dimers was sufficient to induce formation of non-capsid polymers. Unlike the related molecule HAP-1 (Stray et al., Proc. Natl. Acad. Sci. USA 102:8138-43, 2005), no stable assembly intermediates were observed in assembly reactions with BAY 41-4109, indicating that accelerated assembly by BAY 41-4109 was still kinetically regulated by the nucleation rate. Preformed capsids were stabilized by BAY 41-4109, up to a ratio of one inhibitor molecule per two dimers. However, at BAY 41-4109:dimer ratios of 1:1 and greater, capsids were destabilized to yield very large non-capsid polymers. These data suggest the existence of two functionally distinguishable classes of drug-binding sites on HBV capsids. Occupation of the first class of site stabilizes capsid, while binding at the second class requires or induces structural changes that cannot be tolerated without destabilizing the capsid. Our data suggest that HAP compounds may inhibit virus replication by inducing assembly inappropriately and, when in excess, by misdirecting assembly decreasing the stability of normal capsids.     

Protruding Features of Viral Capsids Are Clustered on Icosahedral Great Circles

Spherical viruses are remarkably well characterized by the Triangulation (T) number developed by Casper and Klug. The T-number specifies how many viral capsid proteins are required to cover the virus, as well as how they are further subdivided into pentamer and hexamer subunits. The T-number however does not constrain the orientations of these proteins within the subunits or dictate where the proteins should place their protruding features. These protrusions often take the form of loops, spires and helices, and are significant because they aid in stability of the capsid as well as recognition by the host organism. Until now there has be no overall understanding of the placement of protrusions for spherical viruses, other than they have icosahedral symmetry. We constructed a set of gauge points based upon the work affine extensions of Keef and Twarock, which have fixed relative angular locations with which to measure the locations of these features. This work adds a new element to our understanding of the geometric arrangement of spherical viral capsid proteins; chiefly that the locations of protruding features are not found stochastically distributed in an icosahedral manner across the viral surface, but instead these features are found only in specific locations along the 15 icosahedral great circles. We have found that this result holds true as the T number and viral capsids size increases, suggesting an underlying geometric constraint on their locations. This is in spite of the fact that the constraints on the pentamers and hexamer orientations change as a function of T-number, as you need to accommodate more hexamers in the same solid angle between pentamers. The existence of this angular constraint of viral capsids suggests that there is a fitness or energetic benefit to the virus placing its protrusions in this manner. This discovery may have profound impacts on identifying and eliminating viral pathogens, understanding evolutionary constraints as well as bioengineering for capsid drug delivery systems. This result also suggests that in addition to biochemical attachment restrictions, there are additional geometric constraints that should be adhered to when modifying protein capsids.     

Assembly models for Papovaviridae based on tiling theory

A vital constituent of a virus is its protein shell, called the viral capsid, that encapsulates and hence provides protection for the viral genome. Assembly models are developed for viral capsids built from protein building blocks that can assume different local bonding structures in the capsid. This situation occurs, for example, for viruses in the family of Papovaviridae, which are linked to cancer and are hence of particular interest for the health sector. More specifically, the viral capsids of the (pseudo-) T = 7 particles in this family consist of pentamers that exhibit two different types of bonding structures. While this scenario cannot be described mathematically in terms of Caspar-Klug theory (Caspar D L D and Klug A 1962 Cold Spring Harbor Symp. Quant. Biol. 27 1), it can be modelled via tiling theory (Twarock R 2004 J. Theor. Biol. 226 477). The latter is used to encode the local bonding environment of the building blocks in a combinatorial structure, called the assembly tree, which is a basic ingredient in the derivation of assembly models for Papovaviridae along the lines of the equilibrium approach of Zlotnick (Zlotnick A 1994 J. Mol. Biol. 241 59). A phase space formalism is introduced to characterize the changes in the assembly pathways and intermediates triggered by the variations in the association energies characterizing the bonds between the building blocks in the capsid. Furthermore, the assembly pathways and concentrations of the statistically dominant assembly intermediates are determined. The example of Simian virus 40 is discussed in detail.     

A domain of the hepadnavirus capsid protein is specifically required for DNA maturation and virus assembly

Mutations introduced into the capsid gene of duck hepatitis B virus (DHBV) were tested for their effects on viral DNA synthesis and assembly of enveloped viruses. Four classes of mutant phenotypes were observed among a series of deletions of covering the 3' end of the capsid open reading frame. Class I mutant capsids were able to support normal single-stranded and relaxed circular viral DNA synthesis; class II mutant capsids supported normal single-stranded DNA synthesis but not relaxed circular DNA synthesis; class III mutant capsids resembled class II capsids, but viral DNA synthesis was inhibited 5- to 10-fold; and class IV capsids were severely restricted in their ability to support viral DNA synthesis. Class I capsids were assembled into enveloped virions, but class II, III, and IV capsids were not. Viral DNA synthesized inside class II capsids was normal with respect to minus-strand DNA initiation, plus-strand DNA initiation, and circularization of the DNA, but plus strands failed to be elongated to mature 3-kb DNA. The results suggest that a function of the capsid protein specifically required for viral DNA maturation is also required for assembly of nucleocapsids into envelopes. Thus, class II mutants appear to be defective in the appearance of the "packaging signal" for virus assembly (J. Summers and W. Mason, Cell 29:403-415, 1982).     

Epitope insertion at the N-terminal molecular switch of the rabbit hemorrhagic disease virus T = 3 capsid protein leads to larger T = 4 capsids

Viruses need only one or a few structural capsid proteins to build an infectious particle. This is possible through the extensive use of symmetry and the conformational polymorphism of the structural proteins. Using virus-like particles (VLP) from rabbit hemorrhagic disease virus (RHDV) as a model, we addressed the basis of calicivirus capsid assembly and their application in vaccine design. The RHDV capsid is based on a T=3 lattice containing 180 identical subunits (VP1). We determined the structure of RHDV VLP to 8.0-Å resolution by three-dimensional cryoelectron microscopy; in addition, we used San Miguel sea lion virus (SMSV) and feline calicivirus (FCV) capsid subunit structures to establish the backbone structure of VP1 by homology modeling and flexible docking analysis. Based on the three-domain VP1 model, several insertion mutants were designed to validate the VP1 pseudoatomic model, and foreign epitopes were placed at the N- or C-terminal end, as well as in an exposed loop on the capsid surface. We selected a set of T and B cell epitopes of various lengths derived from viral and eukaryotic origins. Structural analysis of these chimeric capsids further validates the VP1 model to design new chimeras. Whereas most insertions are well tolerated, VP1 with an FCV capsid protein-neutralizing epitope at the N terminus assembled into mixtures of T=3 and larger T=4 capsids. The calicivirus capsid protein, and perhaps that of many other viruses, thus can encode polymorphism modulators that are not anticipated from the plane sequence, with important implications for understanding virus assembly and evolution.     

Weak protein-protein interactions are sufficient to drive assembly of hepatitis B virus capsids

Hepatitis B virus (HBV) is an enveloped DNA virus with a spherical capsid (or core). The capsid is constructed from 120 copies of the homodimeric capsid protein arranged with T = 4 icosahedral symmetry. We examined in vitro assembly of purified E. coli expressed HBV capsid protein. After equilibration, concentrations of capsid and dimer were evaluated by size exclusion chromatography. The extent of assembly increased as temperature and ionic strength increased. The concentration dependence of capsid assembly conformed to the equilibrium expression: K(capsid) = [capsid]/[dimer](120). Given the known geometry for HBV capsids and dimers, the per capsid assembly energy was partitioned into energy per subunit-subunit contact. We were able to make three major conclusions. (i) Weak interactions (from -2.9 kcal/mol at 21 degrees C in low salt to -4.4 kcal/mol at 37 degrees C in high salt) at each intersubunit contact result in a globally stable capsid; weak intersubunit interactions may be the basis for the phenomenon of capsid breathing. (ii) HBV assembly is characterized by positive enthalpy and entropy. The reaction is entropy-driven, consistent with the largely hydrophobic contacts found in the crystal structure. (iii) Increasing NaCl concentration increases the magnitude of free energy, enthalpy, and entropy, as if ionic strength were increasing the amount of hydrophobic surface buried by assembly. This last point leads us to suggest that salt acts by inducing a conformational change in the dimer from an assembly-inactive form to an assembly-active form. This model of conformational change linked to assembly is consistent with immunological differences between dimer and capsid.