Reversing cell polarity: evidence and hypothesis

The long, rod-shaped cells of myxobacteria are polarized by their gliding engines. At the rear, A-engines push while pili pull the front end forward. An hypothesis is developed whereby both engines are partially dis-assembled, then re-assembled at the opposite pole when cells reverse their movement direction. Reversals are induced by an Mgl G-protein switch that controls engine polarity. The switch is driven by an oscillatory circuit of Frizzy proteins. In growing cells, the circuit gives rise to an occasional reversal that makes swarming possible. Then, as myxobacteria begin fruiting body development, a rising level of C-signal input drives the oscillator and changes the reversal pattern. Cells reverse regularly every eight minutes in traveling waves, the reversal period is then prolonged enabling cells to form streams that enlarge tiny random aggregates into fruiting bodies.     

Interconnected Cavernous Structure of Bacterial Fruiting Bodies

The formation of spore-filled fruiting bodies by myxobacteria is a fascinating case of multicellular self-organization by bacteria. The organization of Myxococcus xanthus into fruiting bodies has long been studied not only as an important example of collective motion of bacteria, but also as a simplified model for developmental morphogenesis. Sporulation within the nascent fruiting body requires signaling between moving cells in order that the rod-shaped self-propelled cells differentiate into spores at the appropriate time. Probing the three-dimensional structure of myxobacteria fruiting bodies has previously presented a challenge due to limitations of different imaging methods. A new technique using Infrared Optical Coherence Tomography (OCT) revealed previously unknown details of the internal structure of M. xanthus fruiting bodies consisting of interconnected pockets of relative high and low spore density regions. To make sense of the experimentally observed structure, modeling and computer simulations were used to test a hypothesized mechanism that could produce high-density pockets of spores. The mechanism consists of self-propelled cells aligning with each other and signaling by end-to-end contact to coordinate the process of differentiation resulting in a pattern of clusters observed in the experiment. The integration of novel OCT experimental techniques with computational simulations can provide new insight into the mechanisms that can give rise to the pattern formation seen in other biological systems such as dictyostelids, social amoeba known to form multicellular aggregates observed as slugs under starvation conditions.     

Cell polarity, intercellular signalling and morphogenetic cell movements in Myxococcus xanthus

In Myxococcus xanthus morphogenetic cell movements constitute the basis for the formation of spreading vegetative colonies and fruiting bodies in starving cells. M. xanthus cells move by gliding and gliding motility depends on two polarly localized engines, type IV pili pull cells forward, and slime extruding nozzle-like structures appear to push cells forward. The motility behaviour of cells provides evidence that the two engines are localized to opposite poles and that they undergo polarity switching. Several proteins involved in regulating polarity switching have been identified. The cell surface-associated C-signal induces the directed movement of cells into nascent fruiting bodies. Recently, the molecular nature of the C-signal molecule was elucidated and the motility parameters regulated by the C-signal were identified. From the effect of the C-signal on cell behaviour it appears that the C-signal inhibits polarity switching of the two motility engines. This establishes a connection between cell polarity, signalling by an intercellular signal and morphogenetic cell movements during fruiting body formation.     

Fruiting and non-fruiting myxobacteria: a phylogenetic perspective of cultured and uncultured members of this group

The diversity of myxobacteria present in campus garden soil was surveyed by both cultivation-based and cultivation-independent methods. Detailed phylogenetic analysis of cultured and uncultured myxobacteria 16S rRNA gene sequences revealed that many undescribed relatives of the myxobacteria exist in nature. Molecular systematic analyses also revealed that myxobacterial genera described to date on the basis of the morphology of multi-cellular fruiting bodies were mostly monophyletic. However, these known taxa comprised only in a small part of the sequences recovered directly from soil in a cultivation-independent approach, indicating that the group is much more diverse than previously thought. We propose that the myxobacteria exist in two forms: the fruiting and the non-fruiting types. Most of the uncultured myxobacteria may represent taxa which rarely form fruiting bodies, or may lack some or all of the developmental genes needed for fruiting body formation. In order to identify non-fruiting myxobacteria, new morphology-independent cultivation and isolation techniques need to be developed.     

Adaptation of Salt-tolerant <Emphasis Type="Italic">Myxococcus</Emphasis> Strains and their Motility Systems to the Ocean Conditions

More and more studies have indicated that myxobacteria are able to live in seawater conditions, which, however, can decrease the fruiting body formation ability and also the adventurous (A) and social (S) motility systems of the myxobacteria. To learn the adaptation mechanism of the salt-tolerant myxobacteria to marine conditions, we analyzed 10 salt-tolerant Myxococcus strains of their fruiting body formation and motility. The isolates were from marine samples and possessed different levels of salt tolerance. They had the dual motility system and formed fruiting bodies in the presence of suitable seawater concentrations. Some high salt-tolerant strains even lost their fruiting abilities in the absence of seawater. In response to the presence of seawater, the S-motility was found to be increased in the high salt-tolerants but decreased in the low salt-tolerants. The A-motility, on the other hand, was observed in all the salt-tolerant Myxococcus strains, but increased or decreased in response to the presence of seawater. Perceived shifts of fruiting body formation abilities and motilities discovered in the salt-tolerant Myxococcus strains suggested an ecological adaptation of myxobacterial social behaviors to the marine environments.     

Territorial interactions between two Myxococcus Species.

It is unusual to find fruiting bodies of different myxobacteria occupying the same territory on natural samples. We were thus interested in determining whether myxobacteria establish territorial dominance and, if so, what the mechanism of that interaction is. We had previously observed that vegetative swarms of Myxococcus xanthus and Stigmatella aurantiaca placed close to each other on an agar surface initially merged but eventually separated. Further studies indicated that these two species also formed separate fruiting bodies when mixed together on developmental agar (unpublished observation). We examined the interactions between two more closely related myxobacteria, M. xanthus and M. virescens, in greater detail. When mixtures of a kanamycin-resistant strain of M. xanthus and a kanamycin-sensitive strain of M. virescens were placed together under developmental conditions, the cells sorted themselves out and established separate fruiting body territories. In addition, differential viable counts of a mixture of the two species during development indicated that each strain was producing an extracellular component that inhibited the growth and development of the other. Nevertheless, finally, M. virescens invariably outcompeted M. xanthus at all input ratios of M. xanthus/M. virescens tested. This is consistent with the observation that M. virescens is by far the more commonly encountered of the two species. The properties of the inhibitory substance from M. virescens are consistent with the possibility that it is a bacteriocin. Our working hypothesis is that the bacteriocin plays a role in the establishment of myxobacterial territoriality. If so, this is an example of an ecological function of bacteriocins.     

The peptidoglycan sacculus of Myxococcus xanthus has unusual structural features and is degraded during glycerol-induced myxospore development

Upon nutrient limitation cells of the swarming soil bacterium Myxococcus xanthus form a multicellular fruiting body in which a fraction of the cells develop into myxospores. Spore development includes the transition from a rod-shaped vegetative cell to a spherical myxospore and so is expected to be accompanied by changes in the bacterial cell envelope. Peptidoglycan is the shape-determining structure in the cell envelope of most bacteria, including myxobacteria. We analyzed the composition of peptidoglycan isolated from M. xanthus. While the basic structural elements of peptidoglycan in myxobacteria were identical to those in other gram-negative bacteria, the peptidoglycan of M. xanthus had unique structural features. meso- or LL-diaminopimelic acid was present in the stem peptides, and a new modification of N-acetylmuramic acid was detected in a fraction of the muropeptides. Peptidoglycan formed a continuous, bag-shaped sacculus in vegetative cells. The sacculus was degraded during the transition from vegetative cells to glycerol-induced myxospores. The spherical, bag-shaped coats isolated from glycerol-induced spores contained no detectable muropeptides, but they contained small amounts of N-acetylmuramic acid and meso-diaminopimelic acid.     

Myxobacteria, Polarity, and Multicellular Morphogenesis

Myxobacteria are renowned for the ability to sporulate within fruiting bodies whose shapes are species-specific. The capacity to build those multicellular structures arises from the ability of M. xanthus to organize high cell-density swarms, in which the cells tend to be aligned with each other while constantly in motion. The intrinsic polarity of rod-shaped cells lays the foundation, and each cell uses two polar engines for gliding on surfaces. It sprouts retractile type IV pili from the leading cell pole and secretes capsular polysaccharide through nozzles from the trailing pole. Regularly periodic reversal of the gliding direction was found to be required for swarming. Those reversals are generated by a G-protein switch which is driven by a sharply tuned oscillator. Starvation induces fruiting body development, and systematic reductions in the reversal frequency are necessary for the cells to aggregate rather than continue to swarm. Developmental gene expression is regulated by a network that is connected to the suppression of reversals.     

Leben und Überleben im Boden

Myxobacteria - survivalists in soil Myxobacteria like Myxococccus xanthus are soil-living microorganisms featuring a complex lifestyle, including movement by coordinated swarming on surfaces, predatory feeding on other microorganisms, and the formation of multicellular fruiting bodies when unfavorable environmental conditions are encountered. Bioinformatic analysis of the large myxobacterial genomes has enabled fascinating insights into the molecular basis for the biosynthesis of complex secondary metabolite structures by myxobacteria, and has set the stage for the discovery of novel natural products. Moreover, well-characterized myxobacteria like M. xanthus increasingly play a role as “biochemical factories” for the biotechnological production of bioactive molecules using synthetic biology approaches.     

Cell flexibility affects the alignment of model myxobacteria

Myxobacteria are social bacteria that exhibit a complex life cycle culminating in the development of multicellular fruiting bodies. The alignment of rod-shaped myxobacteria cells within populations is crucial for development to proceed. It has been suggested that myxobacteria align due to mechanical interactions between gliding cells and that cell flexibility facilitates reorientation of cells upon mechanical contact. However, these suggestions have not been based on experimental or theoretical evidence. Here we created a computational mass-spring model of a flexible rod-shaped cell that glides on a substratum periodically reversing direction. The model was formulated in terms of experimentally measurable mechanical parameters, such as engine force, bending stiffness, and drag coefficient. We investigated how cell flexibility and motility engine type affected the pattern of cell gliding and the alignment of a population of 500 mechanically interacting cells. It was found that a flexible cell powered by engine force at the rear of the cell, as suggested by the slime extrusion hypothesis for myxobacteria motility engine, would not be able to glide in the direction of its long axis. A population of rigid reversing cells could indeed align due to mechanical interactions between cells, but cell flexibility impaired the alignment.     

Improved methods of isolation and purification of myxobacteria and development of fruiting body formation of two strains

By using baiting techniques and different purification methods, a high number of myxobacterial strains have been isolated as pure cultures from soil of different regions of China. Because myxobacterial cells do not disperse easily in liquid media, a medium containing an enzymatic hydrolysate of casein (CEH) medium have been used for purification and purity tests combined in a single step. The key method, in which isolates are reintroduced to sterile rabbit dung to induce fruiting bodies formation, facilitates purification of myxobacteria. Sterile rabbit dung pellets are used to mimic the natural growth substance of these organisms which has the advantage that characteristic fruiting bodies emerge, which is a key characteristics in the taxonomy of myxobacteria. In this study, the optimum program of isolation and purification of some myxobacteria strains has been established which will facilitate screening programs. Moreover, the development of fruiting body formation of strain BD20 (Chondromyces) and strain BD54 (Cystobacter) have been recorded in this study.     

Complete genome sequence of the fruiting myxobacterium Corallococcus coralloides DSM 2259

Corallococcus coralloides, like most other myxobacteria, undergoes a developmental program culminating in the formation of fruiting bodies. C. coralloides fruiting bodies are morphologically distinct from those of other fruiting myxobacteria for which full-length genome sequences are available. The genome sequence of the 10.0-Mb C. coralloides genome is presented herein.     

Short-Range Guiding Can Result in the Formation of Circular Aggregates in Myxobacteria Populations

Myxobacteria are social bacteria that upon starvation form multicellular fruiting bodies whose shape in different species can range from simple mounds to elaborate tree-like structures. The formation of fruiting bodies is a result of collective cell movement on a solid surface. In the course of development, groups of flexible rod-shaped cells form streams and move in circular or spiral patterns to form aggregation centers that can become sites of fruiting body formation. The mechanisms of such cell movement patterns are not well understood. It has been suggested that myxobacterial development depends on short-range contact-mediated interactions between individual cells, i.e. cell aggregation does not require long-range signaling in the population. In this study, by means of a computational mass-spring model, we investigate what types of short-range interactions between cells can result in the formation of streams and circular aggregates during myxobacterial development. We consider short-range head-to-tail guiding between individual cells, whereby movement direction of the head of one cell is affected by the nearby presence of the tail of another cell. We demonstrate that stable streams and circular aggregates can arise only when the trailing cell, in addition to being steered by the tail of the leading cell, is able to speed up to catch up with it. It is suggested that necessary head-to-tail interactions between cells can arise from physical adhesion, response to a diffusible substance or slime extruded by cells, or pulling by motility engine pili. Finally, we consider a case of long-range guiding between cells and show that circular aggregates are able to form without cells increasing speed. These findings present a possibility to discriminate between short-range and long-range guiding mechanisms in myxobacteria by experimentally measuring distribution of cell speeds in circular aggregates.     

A novel regulation on developmental gene expression of fruiting body formation in Myxobacteria

Myxobacteria are Gram-negative soil microorganisms that prey on other microorganisms. Myxobacteria have significant potential for applications in biotechnology because of their extraordinary ability to produce natural products such as secondary metabolites. Myxobacteria also stand out as model organisms for the study of cell–cell interactions and multicellular development during their complex life cycle. Cellular morphogenesis during multicellular development in myxobacteria is very similar to that in the eukaryotic soil amoebae. Recent studies have started uncovering molecular mechanisms directing the myxobacterial life cycle. We describe recent studies on signal transduction and gene expression during multicellular development in the myxobacterium Myxococcus xanthus. We provide our current model for signal transduction pathways mediated by a two-component His–Asp phosphorelay system and a Ser/Thr kinase cascade.     

Multicellular development in Myxococcus xanthus is stimulated by predator-prey interactions

Myxococcus xanthus is a predatory bacterium that exhibits complex social behavior. The most pronounced behavior is the aggregation of cells into raised fruiting body structures in which cells differentiate into stress-resistant spores. In the laboratory, monocultures of M. xanthus at a very high density will reproducibly induce hundreds of randomly localized fruiting bodies when exposed to low nutrient availability and a solid surface. In this report, we analyze how M. xanthus fruiting body development proceeds in a coculture with suitable prey. Our analysis indicates that when prey bacteria are provided as a nutrient source, fruiting body aggregation is more organized, such that fruiting bodies form specifically after a step-down or loss of prey availability, whereas a step-up in prey availability inhibits fruiting body formation. This localization of aggregates occurs independently of the basal nutrient levels tested, indicating that starvation is not required for this process. Analysis of early developmental signaling relA and asgD mutants indicates that they are capable of forming fruiting body aggregates in the presence of prey, demonstrating that the stringent response and A-signal production are surprisingly not required for the initiation of fruiting behavior. However, these strains are still defective in differentiating to spores. We conclude that fruiting body formation does not occur exclusively in response to starvation and propose an alternative model in which multicellular development is driven by the interactions between M. xanthus cells and their cognate prey.     

Dynamics of fruiting body morphogenesis

Myxobacteria build their species-specific fruiting bodies by cell movement and then differentiate spores in specific places within that multicellular structure. New steps in the developmental aggregation of Myxococcus xanthus were discovered through a frame-by-frame analysis of a motion picture. The formation and fate of 18 aggregates were captured in the time-lapse movie. Still photographs of 600 other aggregates were also analyzed. M. xanthus has two engines that propel the gliding of its rod-shaped cells: slime-secreting jets at the rear and retractile pili at the front. The earliest aggregates are stationary masses of cells that look like three-dimensional traffic jams. We propose a model in which both engines stall as the cells' forward progress is blocked by other cells in the traffic jam. We also propose that these blockades are eventually circumvented by the cell's capacity to turn, which is facilitated by the push of slime secretion at the rear of each cell and by the flexibility of the myxobacterial cell wall. Turning by many cells would transform a traffic jam into an elliptical mound, in which the cells are streaming in closed orbits. Pairs of adjacent mounds are observed to coalesce into single larger mounds, probably reflecting the fusion of orbits in the adjacent mounds. Although fruiting bodies are relatively large structures that contain 10(5) cells, no long-range interactions between cells were evident. For aggregation, M. xanthus appears to use local interactions between its cells.     

Spatial Simulations of Myxobacterial Development

Many bacteria exhibit multicellular behaviour, with individuals within a colony coordinating their actions for communal benefit. One example of complex multicellular phenotypes is myxobacterial fruiting body formation, where thousands of cells aggregate into large three-dimensional structures, within which sporulation occurs. Here we describe a novel theoretical model, which uses Monte Carlo dynamics to simulate and explain multicellular development. The model captures multiple behaviours observed during fruiting, including the spontaneous formation of aggregation centres and the formation and dissolution of fruiting bodies. We show that a small number of physical properties in the model is sufficient to explain the most frequently documented population-level behaviours observed during development in Myxococcus xanthus.