The effect of heavy metals on microbial community structure of a sulfidogenic consortium in anaerobic semi-continuous stirred tank reactors

The effect of heavy metals on community structure of a heavy metal tolerant sulfidogenic consortium was evaluated by using a combination of denaturing gradient gel electrophoresis (DGGE) of 16S rRNA gene and dissimilatory sulfite reductase (dsrB) gene fragments, 16S rRNA gene cloning analysis and fluorescence in situ hybridization (FISH). For this purpose, four anaerobic semi-continuous stirred tank reactors (referred as R1–R4) were run in parallel for 12 weeks at heavy metal loading rates of 1.5, 3, 4.5 and 7.5 mg l^?1 d^?1 each of Cu²⁺, Ni²⁺, Zn²⁺, and Cr⁶⁺, respectively. The abundance ratio of Desulfovibrio vulgaris detected by FISH to total cell counts was consistent with the obtained results of cloning and DGGE. This indicated that D. vulgaris was dominant in all analyzed samples and played a key role in heavy metal removal in R1, R2, and R3. In contrast, after 4 weeks of operation of R4, a distinct biomass loss was observed and no positive hybridized cells were detected by specific probes for the domain Bacteria, sulfate-reducing bacteria and D. vulgris. High removal efficiencies of heavy metals were achieved in R1, R2 and R3 after 12 weeks, whereas the precipitation of heavy metals in R4 was significantly decreased after 4 weeks and almost not observed after 6 weeks of operation. In addition, the anaerobic bacteria, such as Pertrimonas sulfuriphila, Clostridium sp., Citrobacter amalonaticus, and Klebsiella sp., identified from DGGE bands and clone library were hypothesized as heavy metal resistant bacteria at a loading rate of 1.5 mg l^?1 d^?1 of Cu²⁺, Ni²⁺, Zn²⁺, and Cr^6+.     

Compartments for the Management of Municipal Solid Waste

Despite technological developments and improved liner-material applications, heavy metals in landfill leachate still penetrate the soil profile, polluting the soil and ground-water. An alternative approach therefore must be explored to reduce heavy-metal migration in soil-bentonite landfill liners. By considering the interaction of different heavy metals and their synergetic and antagonistics behaviors, such an approach could be developed. Low mobility metals such as Cu²⁺, and Pb²⁺ inhibit the adsorption of Cd²⁺ which is a moderate-mobility metal and Cu²⁺ sorption is decreased by the presence of Zn²⁺ and Cd²⁺. Therefore, Zn²⁺, a low-mobility metal, cannot be grouped with Cu²⁺. This way, four compatible metal groups have been identified: (1) low mobility: Pb²⁺, Cu²⁺, and Ag, (2) low mobility: Zn²⁺ and Cr³⁺; (3) moderate mobility: As²⁺, Fe²⁺, and Ni²⁺; (4) high mobility: Cd²⁺ and Hg²⁺. Cd²⁺ with a moderate mobility pattern is synergetic to Fe²⁺ and is more mobile with Ni²⁺. Therefore, Cd²⁺ is separated from the moderate-mobility group and is consigned with Hg, a high-mobility metal. The liner materials suitable for Hg²⁺ are assumed to be suitable for Cd²⁺ as well. Based on this concept, and to reduce heavy metal mobility, wastes should be segregated on compatibility basis according to their heavy metal contents before being disposed in different individual compartments. For wastes containing several incompatible heavy metals, sorting should be based on the heavy-metal with the highest concentration. Another solution is the manufacturing of products using compatible heavy metal combinations and then labeling them accordingly. Such waste segregation and landfill compartmentalization lowers risks of groundwater contamination and liner cost.     

Effect of nickel,copper, and zinc on emulsifier production and saturation of cellular fatty acids in the filamentous fungus Curvularia lunata

In the first step of this investigation the toxicity of Ni²⁺, Cu²⁺, and Zn²⁺ ions to the emulsifier producing strain of Curvularia lunata was assessed. Among all the heavy metals studied, Ni²⁺ ions were found to be the most toxic to C. lunata, whereas Zn²⁺ ions exhibited the lowest toxicity. Moreover, only Ni²⁺, when used at sublethal concentration (5 mM) caused lysis of some hyphal tip cells after a short-term exposure (5 h). In the next step, emulsifier production, accumulation of heavy metals by mycelia and emulsifier as well as saturation of cellular fatty acids were examined in 48-h-old cultures where fungal growth intensity was not inhibited by heavy metals (in the presence of Ni²⁺, Cu²⁺, and Zn²⁺ ions at the initial concentration of 1, 5, and 15 mM, respectively) and in cultures where approximately 50% biomass inhibition occurred (in the presence of Ni²⁺, Cu²⁺, and Zn²⁺ ions at the initial concentrations of 3, 10, and 17.5 mM, respectively). Among all the heavy metals studied only Ni²⁺ ions did not induce emulsifier production. As compared with the control, only biomass treated with Ni²⁺ ions displayed an increase in total lipid saturation. This effect resulted mainly from the decrease in linoleic acid (18:2) content correlated with the increase in the amount of stearic acid (18:0). The possible mechanisms by which Ni²⁺ ions could alter the fatty acid profile of C. lunata and the protective role of the emulsifier were also discussed.     

Multi-metal biosorption and bioaccumulation by Exiguobacterium sp. ZM-2

The present work deals with the biosorption performance of dried and non-growing biomasses of Exiguobacterium sp. ZM-2, isolated from soil contaminated with tannery effluents, for the removal of Cd²⁺, Ni²⁺, Cu²⁺, and Zn²⁺ from aqueous solution. The metal concentrations studied were 25 mg/l, 50 mg/l, 100 mg/l, 150 mg/l and 200 mg/l. The effect of solution pH and contact time was also studied. The biosorption capacity was significantly altered by pH of the solution. The removal of metal ions was conspicuously rapid; most of the total sorption occurred within 30 min. The sorption data have been analyzed and fitted to the Langmuir and Freundlich isotherm models. The highest Q_max value was found for the biosorption of Cd²⁺ at 43.5 mg/g in the presence of the non-growing biomass. Recovery of metals (Cd²⁺, Zn²⁺, Cu²⁺ and Ni²⁺) was found to be better when dried biomass was used in comparison to non-growing biomass. Metal removal through bioaccumulation was determined by growing the bacterial strain in nutrient broth amended with different concentrations of metal ions. This multi-metal resistant isolate could be employed for the removal of heavy metals from spent industrial effluents before discharging them into the environment.     

Enhanced heavy metal removal from waste water by viable, glucose pretreated Saccharomyces cerevisiae cells

Summary The bioaccumulation of metals (Cu²⁺, Cr⁶⁺, Cd²⁺, Ni²⁺ and Zn²⁺) from three electroplating effluents by viable Saccharomyces cerevisiae, and the effect of glucose treatment on accumulation was determined. Pretreatment of the yeast cells with glucose increased the amount of metal removed, whilst direct addition of glucose to the yeast-effluent solution had no effect on the amount of metal accumulated.     

Isolation and Molecular Characterization of Heavy Metal-Resistant Azotobacter chroococcum from Agricultural Soil and Their Potential Application in Bioremediation

Pollution of soil with heavy metals, herbicides, antibiotics and other chemicals is known to have a negative effect on microbial activities. Therefore, the aim of this study was to isolate cultures of Azotobacter sp. from polluted and unpolluted soils and to study the effect of these pollutants on their growth. A total of 120 Azotobacter sp. were isolated from soils irrigated with wastewater (contaminated soils) and groundwater (uncontaminated soils). These isolates were screened for resistance to heavy metals, herbicide and antibiotics. Also, the soils from which the cultures were isolated were analyzed for the concentrations of Zn²⁺, Cd²⁺, Cu²⁺, Pb²⁺ and Mn²⁺ they contained. Contaminated soil showed high levels of heavy metals as compared to uncontaminated soil. The size of the Azotobacter population in contaminated soil was lower than that in uncontaminated soil. Of the Azotobacter isolates, 64 that were recovered from contaminated soil exhibited high resistance to heavy metals (Hg²⁺, Cd²⁺, Cu²⁺, Cr³⁺, Co²⁺, Ni²⁺, Zn²⁺ and Pb²⁺) and herbicide 2,4-D compared to 56 isolates from uncontaminated soil. Also, isolates from contaminated soil showed high resistance to chloramphenicol, nitrofurantoin and co-trimoxazole compared to those isolated from uncontaminated soil. The majority of Azotobacter isolates from contaminated soil showed multiple-resistance to different metal ions and antibiotics. All isolates failed to grow at pH less than 6. Salt concentration (5%) was found to be inhibitory to all isolates. The most potent isolates from contaminated soil that showed multiresistance to all substances tested were identified on the basis of morphological and biochemical characteristics, and 16S rRNA as A. chroococcum. These resistant isolates could be employed in contaminated soils and/or bioremediation.     

Uptake of heavy metals by <Emphasis Type="Italic">Stylonychia mytilus</Emphasis> and its possible use in decontamination of industrial wastewater

The heavy metal resistant ciliate, Stylonychia mytilus, isolated from industrial wastewater has been shown to be potential bioremediator of contaminated wastewater. The ciliate showed tolerance against Zn²⁺ (30 μg/mL), Hg²⁺ (16 μg/mL) and Ni²⁺ (16 μg/mL). The metal ions slowed down the growth of the ciliate as compared with the culture grown without metal stress. The reduction in cell population was 46% for Cd²⁺, 38% for Hg²⁺, 23% for Zn²⁺, 39% for Cu²⁺ and 51% for Ni²⁺ after 8 days of metal stress. S. mytilus reduced 91% of Cd²⁺, 90% of Hg²⁺ and 98% of Zn²⁺ from the medium after 96 h of incubation in a culture medium containing 10 μg/mL of the respective metal ions. Besides this, the ciliate could also remove 88% of Cu²⁺ and 73% Ni²⁺ from the medium containing 5 μg/mL of each metal after 96 h. The ability of Stylonychia to take up variety of heavy metals from the medium could be exploited for metal detoxification and environmental clean-up operations.     

Mathematical modeling of Fe(II), Cu(II), Ni(II) and Zn(II) removal in a horizontal rotating tubular bioreactor

Industrial wastewaters polluted with toxic heavy metals are serious ecological and environmental problem. Therefore, in this study multi-heavy metals (Fe²⁺, Cu²⁺, Ni²⁺ and Zn²⁺) removal process with mixed microbial culture was examined in the horizontal rotating tubular bioreactor (HRTB) by different combinations of process parameters. Hydrodynamic conditions and biomass sorption capacity have main impact on the removal efficiency of heavy metals: Fe²⁺ 95.5–79.0%, Ni²⁺ 92.7–54.8%, Cu²⁺ 87.7–54.9% and Zn²⁺ 81.8–38.1%, respectively. On the basis of experimental results, integral mathematical model of removal heavy metals in the HRTB was established. It combines hydrodynamics (mixing), mass transfer and kinetics to define bioprocess conduction in the HRTB. Mixing in the HRTB was described by structured cascade model and metal ion removal by two combined diffusion–adsorption models, respectively. For Langmuir model, average variances between experimental and simulated concentrations of metal ions were in the range of 1.22–10.99 × 10⁻³ and for the Freundlich model 0.12–3.98 × 10⁻³, respectively. On the basis of previous facts, it is clear that developed integral bioprocess model with Freundlich model is more efficient in the prediction of concentration of metal ions in the HRTB. Furthermore, the results obtained also pointed out that the established model is at the same time accurate and robust and therefore it has great potential for use in the scale-up procedure.     

Impact of Heavy Metals on the Selective Phenotypical Markers of Pseudomonas aeruginosa

The aim of this study was to characterize the impact of heavy metals on phenotypical markers of Pseudomonas aeruginosa. Twenty-two isolates of P. aeruginosa, either clinical (20) or secondary treated wasterwater (2), were used to inoculate micro-ecosystems of sterile distilled water or secondary waste effluent in the presence of subminimal inhibitory concentrations of a variety of heavy metals commonly encountered in the aquatic naturally habitat (Ca²⁺, Co²⁺, Cr³⁺, Cu²⁺, Hg²⁺, Ni²⁺, Zn²⁺). Micro-ecosystems were exposed to visible light at laboratory temperature and individual strains were reisolated after a 1-, 3-, or 6-month period. The re-isolates (129) were characterized using hierarchical classification analysis in order to define affinities among variants of P. aeruginosa. Subsequently, discriminant analysis was used to detect eventual relationships among the different phenotypical markers studied. Results of the hierarchical classification, based on qualitative or quantitative approaches, showed clearly that incubation of P. aeruginosa in the presence of heavy metals altered the studied phenotypical markers, namely serotype, phage type, MIC of metals, and pyocin type. Discriminant analysis showed that the studied phenotypical markers could be classified into four clusters: C1 (L1 and L2 phage types, Hg tolerance and/or resistance, S2 serotype), C2 (P2 pyocin type, Cd tolerance and/or resistance, S1 serotype), C3 (Co and Cr tolerance and/or resistance) and C4 (P1 pyocin type, Ni, Zn, and Cu tolerance and/or resistance).     

Sorption of heavy metals by four basidiomycetous fungi

Biosorptions of Pb²⁺, Cr⁶⁺, Cd²⁺ and Ni²⁺ were investigated, with special emphasis on the first one, using live and dead fungal mycelia. Of the four fungi, namely Polyporus ostreiformis, Volvariella volvacea, Pleurotus sajor-caju and Phanerochaete chrysosporium, the last one was found to be most effective in Pb²⁺ removal. Total biosorption was effected in 6 days up to the Pb²⁺ concentration of 6 mg/l, with a specific uptake of 1.33 mg Pb²⁺/g dry cell mass. The removal of other three metals varied between 28.8–73.3% from a medium containing 4 mg/l of each of the metals.Laboratory facilities created under M.Tech programme in Biotechnology and Engineering (sponsored by Department of Biotechnology, Govt. of India) were partly utilized for this study.     

Effect of Microwave Radiation on Immobilization of Heavy Metals in Sediment Sludge

In order to evaluate the effect of microwave radiation on immobilization of heavy metals (Cu ^{2 +} , Cr ^{6 +} , Zn ^{2 +} and Pb ^{2 +} ) in sediment sludge, leaching tests were run under different test conditions to compare microwave radiation with conventional blast heating and drying process for their effectiveness in immobilizing heavy metals within sediment sludge. Experimental results indicate that microwave radiation can decrease the concentration of heavy metals in leachate by 63% ～ 70% more than conventional blast heating and drying process in an aclinic shake leaching test. Under the same simulated natural water conditions, the concentration of heavy metals in the leachate using microwave radiation is well below the concentration of heavy metals in leachate using conventional blast heating and drying process. It is therefore concluded that microwave radiation is much more effective than conventional blast heating and drying process in immobilizing heavy metals in sediment sludge.     

Selectivty Assessments of a Sequential Extraction Procedure for Potential Trace Metals’ Mobility and Bioavailability in Phosphate Rocks from Jordan Phosphate Mines

A modified six-step sequential extraction procedure was used to fractionate and determine the following trace metals: U⁴⁺, As⁵⁺, Cd²⁺, Cr⁺², Cu²⁺, Ni²⁺, Pb²⁺, Zn²⁺, and V⁵⁺ in three different phosphate rocks from mines in Jordan. The mean values of uranium in the samples investigated were 98 ± 6 mgkg^?1, 92 ± 3 mgkg^?1, 215 ± 6 mgkg^?1, and 159 ± 13 mgkg^?1, respectively. The sequential extraction results obtained showed that most of the U⁴⁺ in these samples was strongly bound with 87%, 93%, 97%, and 93% of the total content, respectively, remaining in the samples after the sequential extraction steps were performed. Hence, 13%–7% and 3%–7%, respectively, of the U⁴⁺ is distributed in the most labile form, indicating that the majority of the U⁴⁺ in these samples was highly incorporated within the apatite present in the samples. The aforementioned was in agreement with the XRD and SEM-EDX results obtained. The apparent mobility of U⁴⁺, As⁵⁺, Cd²⁺, Cr⁺², Cu²⁺, Ni²⁺, Pb²⁺, Zn²⁺, and V⁵⁺ (using all six extraction steps) from the Al-Abied and Al-Hasa samples was as follows: As⁵⁺ (30.17%)> Cu²⁺ (6.55%)> Zn²⁺(4.34%)> Cd²⁺ (3.84%) Cr⁺² (3.66%)> Pb²⁺ (2.57%)> V⁵⁺ (53%)> Ni²⁺ (1.71%)> U⁴⁺ (0.99%). The mobility of As⁵⁺, Cd²⁺, Cu²⁺, Cr⁺², Ni²⁺, Pb²⁺, U⁴⁺, Zn²⁺, and V⁵⁺ (using all six extraction steps) from Eshidiya samples was as follows: As⁵⁺ (17.32%)> Cr⁺² (4.84%)> Zn²⁺ (4.25%)> Pb²⁺ (4.19%)> Cu²⁺ (3.49%)> V⁵⁺ (1.42%)> Cd²⁺ (0.78) U⁴⁺ (0.09%)> Ni²⁺ (0%).     

Effect of heavy metals on the glutathione status in different ectomycorrhizal <Emphasis Type="Italic">Paxillus involutus</Emphasis> strains

The glutathione (GSH) status and heavy metal tolerance were investigated in four Paxillus involutus strains isolated from different heavy-metal-polluted and non-polluted regions of Europe. The heavy metal burden in the habitats did not affect significantly either the heavy metal (Cr₂O₇²⁻, Cd²⁺, Hg²⁺, Pb²⁺, Zn²⁺, Cu²⁺) tolerance and accumulation or the GSH production of the strains tested. Exposures to heavy metals increased the intracellular GSH concentrations in 12 from 24 experimental arrangements (four strains exposed to six heavy metals) independently of the habitats of the strains. The importance of GSH in heavy metal tolerance (high MIC values, ability to accumulate heavy metals and to grow in the presence of heavy metals) was thus demonstrated in this ectomycorrhizal fungus.     

Yersiniabactin metal binding characterization and removal of nickel from industrial wastewater

Yersiniabactin (Ybt) is a metal‐binding natural product that has been re‐purposed for water treatment. The early focus of this study was the characterization of metal binding breadth attributed to Ybt. Using LC‐MS analysis of water samples exposed to aqueous and surface‐localized Ybt, quantitative assessment of binding was completed with metals that included Pd²⁺, Mg²⁺, and Zn²⁺. In total, Ybt showed affinity for 10 metals. Next, Ybt‐modified XAD‐16N resin (Ybt‐XAD) was utilized to quantify the affinity for metal removal, showing a rank order of Fe³⁺ > Ga³⁺ > Ni²⁺ > Cu²⁺ > Cr²⁺≈Zn²⁺ > Co²⁺ > Pd²⁺ > Mg²⁺ > Al³⁺, and in the applied treatment of wastewater from a local precious metal plating company, showing selective removal of nickel from the aqueous effluent. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1548–1554, 2017     

Toxicity of heavy metals to Asellus aquaticus (L.) (Crustacea,Isopoda)

Effects of heavy metals on the isopod Asellus aquaticus (L.) are studied by static toxicity tests. Results demonstrate that the species is sensitive to Cd⁺², Cr⁺⁶, Cu⁺², Fe⁺³, Hg⁺², Ni⁺² Pb⁺² and Zn⁺², but the toxicity of each metal is different. Differences are also found between adults and between adults and juveniles. The comparative analysis of all data on the toxicity has been performed on the concentrations of metal ions and not on metal compound concentrations.Criteria for establishing water quality in order to guarantee protection of the environment are discussed.     

The interaction of zinc, nickel and cadmium with serum albumin and histidine-rich glycoprotein assessed by equilibrium dialysis and immunoadsorbent chromatography

Human serum albumin (HSA) has been shown to bind 2–3 mol of Zn²⁺, Ni²⁺, or Cd²⁺ per mole of protein with apparent dissociation constants (K_d) in the range of 10 μm. Rabbit histidine-rich glycoprotein (HRG) binds 13, 9, and 6 mol of Zn²⁺, Ni²⁺, and Cd²⁺ per mole of protein, respectively, with apparent K_ds also near 10 μm. However, the binding of metals by HRG exhibits positive cooperativity, so that the apparent K_ds may underestimate HRGs true affinity for metal ions. The relative affinities of HSA and HRG for metal ions were found to be Zn²⁺ > Ni²⁺ > Cd²⁺. In addition, histidine (a serum metal chelator) affected the binding of Ni²⁺ by both proteins but not that of Zn²⁺ or Cd²⁺. At physiological concentrations of HSA (250 μm), HRG (2.5 μm), and histidine (100 μm), HRG bound 36% of the Zn²⁺, 9% of the Ni²⁺, and 13% of the Cd²⁺ at a total metal concentration of 25 μm. Under the same conditions HSA held 37% of the Zn²⁺, 14% of the Ni²⁺, and 56% of the Cd²⁺. Thus, HSA appears to have a lower intrinsic affinity for the three metals than HRG but would be expected to bind a higher proportion of these metals in serum. A specific immunoadsorbent column was prepared and used to study the metal binding by HRG in serum directly. Both ⁶⁵Zn²⁺ and ⁶³Ni²⁺ were associated with HRG in aliquots of rabbit serum after incubation with the corresponding metal ion. This evidence indicates that HRG must be considered as a metal binding component of serum.     

Probing the coordination properties of glutathione with transition metal ions (Cr2+,Mn2+,Fe2+,Co2+, Ni2+,Cu2+,Zn2+,Cd2+,Hg2+) by density functional theory

Complexes formed by reduced glutathione (GSH) with metal cations (Cr²⁺, Mn²⁺,Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺,Hg²⁺) were systematically investigated by the density functional theory (DFT). The results showed that the interactions of the metal cations with GSH resulted in nine different stable complexes and many factors had an effect on the binding energy. Generally, for the same period of metal ions, the binding energies ranked in the order of Cu²⁺>Ni²⁺>Co²⁺>Fe²⁺>Cr²⁺>Zn²⁺>Mn²⁺; and for the same group of metal ions, the general trend of binding energies was Zn²⁺>Hg²⁺>Cd²⁺. Moreover, the amounts of charge transferred from S or N to transition metal cations are greater than that of O atoms. For Fe²⁺,Co²⁺,Ni²⁺,Cu²⁺,Zn²⁺,Cd²⁺ and Hg²⁺ complexes, the values of the Wiberg bond indices (WBIs) of M-S (M denotes metal cations) were larger than that of M-N and M-O; for Cr²⁺ complexes, most of the WBIs of M-O in complexes were higher than that of M-S and M-N. Furthermore, the changes in the electron configuration of the metal cations before and after chelate reaction revealed that Cu²⁺, Ni²⁺,Co²⁺ and Hg²⁺ had obvious tendencies to be reduced to Cu⁺,Ni⁺,Co⁺ and Hg⁺ during the coordination process.     

Effect of the synthetic growth regulator Cytodef and heavy metals on oxidative status in cucumber plants

We studied the influence of a synthetic cytokinin-like growth regulator (Cytodef) and heavy metal ions—Pb²⁺, Sr²⁺, Zn²⁺, and Ni²⁺—on generation of superoxide anion (O₂^⊙−), lipid peroxidation, and carotenoids content in leaves of 7-day-old cucumber plants (Cucumis sativus L., cv. Izyashchnyi). In some instances Cytodef reduced the toxicity of heavy metals: it mitigated the negative effect of metals on oxidative processes and elevated the concentration of antioxidants (carotenoids).     

Toxicity of chromium and tin toAnabaena doliolum Interaction with bivalent cations

Summary The toxicity of chromium and tin on growth, photosynthetic carbon-fixation, oxygen evolution, heterocyst differentiation and nitrogenase activity ofAnabaena doliolum and its interaction with bivalent cations has been studied. Some interacting cations, viz. Ca²⁺, Mg²⁺ and Mn²⁺, substantially antagonised the toxic effects of chromium and tin with reference to growth, heterocyst differentiation and nitrogenase activity in the following hierarchal sequence: Ca²⁺ > Mg²⁺ > Mn²⁺. However, the sequence of hierarchy was Mg²⁺ > Ca²⁺ > Mn²⁺ for carbon fixation and Mn²⁺ > Mg²⁺ > Ca²⁺ for photosynthetic oxygen evolution. Synergistically inhibitory patterns were noticed for all the parameters, viz. growth,¹⁴CO₂ uptake, oxygen evolution, heterocyst differentiation and nitrogenase activity ofA. doliolum when Ni²⁺, Co²⁺ and Zn²⁺ were combined with the test metals in the growth medium. These cations followed the following sequence of synergistic inhibition: Ni²⁺ > Co²⁺ > Zn²⁺. Among all the interacting cations, Ca²⁺, Mg²⁺ and Mn²⁺ exhibited antagonistic effects which relieved the test cyanobacterium from metal toxicity. In contrast to this, Ni²⁺, CO²⁺ and Zn²⁺ showed synergistic inhibition which potentiating the toxicity of test metals in the N₂-fixing cyanobacteriumA. doliolum. It is evident from the present study that bivalent cations, viz. Ca²⁺, Mg²⁺, Mn²⁺, Ni²⁺, Co²⁺ and Zn²⁺, may appreciably regulate the toxicity of heavy metals in N₂-fixing cyanobacteria if present in aquatic media.     

Cadmium binding characterization and mechanism of a newly isolated strain Cystobasidium oligophagum QN-3

The aim of this study was to screen a strain for the removal of Cd²⁺ from aqueous solution and investigate the characterization and mechanism of the Cd²⁺ binding process. A novel strain of yeast showed high tolerance of cadmium, namely Cystobasidium oligophagum QN-3, was isolated from soils, which could resist 22,000 mg/L and 18,000 mg/L Cd²⁺ on PDA (potato dextrose agar) plate and in PDA liquid medium, respectively. Cd²⁺ binding experiment showed that the strain could remove Cd²⁺ from aqueous solution effectively, the maximum Cd²⁺ removal rate of 84.45% was achieved at initial Cd²⁺ concentration 30 mg/L. Scanning electron microscopy (SEM) analysis revealed that sorption of Cd²⁺ by cells could be associated with changes in the cell surface morphology. Fourier transform-infrared spectroscopy (FTIR) analysis confirmed the important role of the functional groups  OH, CO,  NH₂, COO , PO, and CH on the cell surface in the binding of Cd²⁺. The comparison of the binding ability of different cellular parts indicated a significant role of the cell wall played in the Cd²⁺ binding process. Pretreatment of the cells by boiling or ultrasonication could improve the biosorption capacity of QN-3. In addition, QN-3 exhibited selective and preferential property of binding capacity for other heavy metals, such as Pb²⁺, Cu²⁺, Cd²⁺, Zn²⁺, and Ni²⁺. These data suggested the promising use of Cystobasidium oligophagum QN-3 as an effective and friendly biosorbent for cadmium or other heavy metals decontamination in the environment.